Allegedly Apple has fixed the bug that made this necessary, so we
should be able to include these two test-cases once more.
This reverts commit ba9585bd02.
Fixes: QTBUG-69875
Change-Id: I5ac6019c0d647691eda6cdbb2a53e7471859d4a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Android uses its own time-zone naming, which includes a zone called
"Canada/East-Saskatchewan", whose second component is 17 characters
long. This violates a rule in the IANA naming scheme for zones, that
limits components to 14 characters each. So tweak the isValidId()
check to allow Android its long names.
Android has added Outer Mongolian time-zones, which are as borked as
many others in 1970, so blacklist those transitionEachZone() tests.
Fixes: QTBUG-69128
Change-Id: I46f674f095431335b16900860d83b624257ae3bb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
They were tucked away in the back-end of the isTimeZoneIdAvailable()
test, but a separate isValidId() test had been added more recently,
which made some (arguably all) of them redundant. Reworked this test
in the process, so that the QSKIP() happens in _data() once instead of
in the test that's never run because there are no data rows.
Change-Id: Icaa6227ace9a1aa944d085691cdcfb3adf4a51dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On NTFS, a junction point can be created and deleted by the mklink and
rmdir commands, respectively. If a directory is not identified
correctly as a junction, then applications will likely try to remove
it using recursive methods, leading to fatal data loss.
With this change, Qt can identify file system entries as junctions,
allowing applications to use the correct file system operation to
remove it.
The test needs to delay the cleaning up of junctions and files it
creates until the checks are complete; since they might fail and make
the test function return prematurely, use a scope guard.
[ChangeLog][QtCore][QFileInfo] Add QFileInfo::isJunction so that
applications can recognize NTFS file system entries as junctions
Task-number: QTBUG-75869
Change-Id: I3c208245afbd9fb7555515fb776ff63b133ca858
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Had to teach the update program to accept category Lm as for
Joining_Transparent, for the sake of a new ArabicShaping.txt entry.
Added three new Unicode versions, several new scripts and a new
word-break class.
Updated UCD's test data for tst_QTextBoundaryFinder. This left 57
tests failing; I have commented out the data rows for those tests,
pending someone with more knowledge addressing this.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Change-Id: Ic33d3b3551195d47a84d98e84020f57a68f0b201
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Do this by templating the floating-point tests, which removes some
existing duplication as well as avoiding new duplication. Did some
renaming in the process. Added some tests of fuzzyCompare that come
closer to its boundary. Increased number of tests from 69 to 97. Use
std::numeric_limits to replace assorted hard-coded constants and old
C-library boundary-value macros.
It turns out MSVC's float conflates quiet and signaling NaN (although
MinGW's doesn't); and WebAssembly's old fastcomp compiler conflates
NaNs for both float and double; so XFAIL the test for distinct NaNs in
those cases.
Change-Id: I0a1c0d2f68f75d51b8cda9e3ddfe7fa9c190a3e2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
Released on October 4th.
Adds Windows names for two time zones, Qyzylorda and Volgograd.
Added languages Chickasaw (cic), Muscogee (mus) and Silesian (szl).
Norwegian number formatting has flipped back to using colon rather
than dot as time separator; it's flipped back and forth over the last
several CLDR releases. The dot form is present as a variant, the
colon form was long given as the normal pattern, then went away; but
now it's back as a contributed draft and that's what we pick up.
The MS-Win time-zone ID script was iterating a dict, causing random
reshuffling when new entries are added. Fixed that by doing the
critical iteration in sorted order.
Omitted locales ccp_BD and ccp_IN due to QTBUG-69324.
Task-number: QTBUG-79418
Change-Id: I43869ee1810ecc1fe876523947ddcbcddf4e550a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While I was looking into a bug related to problems building the test
without GUI, I noticed a lot of spurious #include lines so tidied up a
bit. Split some long lines, while I was about it.
Change-Id: Id87eb6f612c6b174f8240dfe9c00e0929244fb6c
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Thanks to Dmitriy Purgin for pointing out the serialization one.
Task-number: QTBUG-79353
Change-Id: Ia3d750b17ddd8fbb7a83a55df7e4546ca78c358b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake config for tst_QString tried to impose QT_NO_CAST_TO_ASCII
on it, but the source file explicitly #undef-s this symbol and its
friends. Leave the define commented out in the .pro so that a comment
can explain why it's no good.
Change-Id: I7620f4e104f0cdab05fdc246b903c40026e63d76
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test QT_CONFIG(icu) in the code instead of testing qtConfig(icu) in
the profile and setting an extra define just to shadow what's already
defined. Also remove the matching define from qcollator.pro, whose
test code didn't use it.
Noticed while reviewing the conversions to CMake.
Change-Id: I19d3b1026b2a8f50ec424c450614e721500fd38a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
stat() and friends expect a null-terminated C string. There is no way to
generate anything useful from a string that has null bytes in the
middle. It's important to catch this early, as otherwise, for example, a
QDir::exists() on such a path can return true, as the path is silently
truncated.
Extend the checks for empty file names to windows and add checks for null
bytes.
Change-Id: Ie9794c3a7c4fd57f9a66bdbbab8b45a08b6f9170
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
[ChangeLog][QtCore][QAbstractItemModel] The match() method now
supports the new Qt::RegularExpression match flag value. This
will allow users to use either a string or a fully configured
QRegularExpression when doing searches. In the second case,
the case sensitivity flag will be ignored if passed.
Task-number: QTBUG-72587
Change-Id: I07c8d72a661c48b7f4fcf13ef8e95980bcdcb998
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Add a RAII class for registry keys and use it throughout
the code base.
Change-Id: I666b2fbb790f83436443101d6bc1e3c0525e78df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Always try to create the runtime directory and never change
the permissions of an existing directory. Conform to the
XDG Base Directory Specification:
"If, when attempting to write a file, the destination directory
is non-existent an attempt should be made to create it with
permission 0700. If the destination directory exists already
the permissions should not be changed."
Fixes: QTBUG-68338
Change-Id: Iaf854d69225fc46e43abae86232d749e5c247df0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only allow implicit conversions when the types involved are compatible.
That means, only allow construction and copy assignment when the type
X* is convertible to type T*. This is done using SFINAE and the
std::is_convertible type trait, which makes the previous
QSHAREDPOINTER_VERIFY_AUTO_CAST obsolete.
This patch fixes compilation when a function is overloaded with
Q{Shared,Weak}Pointer of different, incompatible types. Previously, this
resulted in a compilation error due to an ambiguous overload.
Change-Id: I069d22f3582e69842f14284d4f27827326597ca2
Fixes: QTBUG-75222
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both the spline curves and (most of) the predefines curves are defined
as having start value 0.0 and end value 1.0. The spline and In/OutBack
functions would sometimes not produce that result precisely, so code
could not reliably depend on expressions like (easedValue < 1.0)
becoming false. Fix by explicitly handling endpoints.
Fixes: QTBUG-76781
Fixes: QTBUG-72630
Change-Id: I21be43af469a76c090154bffef8406a9baf2d0b1
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
A default-constructed QDateTime is invalid, but compared equal to a
valid one referencing the start of 1970. This lead to date properties
in QML being initialized invalid but not getting an onChange if the
first value they're set to is the start of 1970.
Fixing that then lead to some tests failing. Indeed, the original
equality check involved using toMSecsSinceEpoch(), whose value is
undefined unless the datetime is valid, without a prior check on its
validity: so ensure all uses of toMSecsSinceEpoch() are guarded with
isValid() checks.
Reworked tst_QDateTime::toSecsSinceEpoch() to use its bool column
(previously unused, after separating from toTime_t(), which uses this
column for "out of time_t's range") for validity of the datetime.
[ChangeLog][QtCore][QDateTime] Invalid datetimes are now treated as
equal and less than all valid ones. They could previously be found
equal to valid datetimes.
Fixes: QTBUG-79006
Change-Id: Ie72deb8af4350a5e808144d0f6e42dc8eb3ff5ef
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QString::fromAscii() is deprecated since 5.0 but still tested.
So suppress deprecations for its code.
Change-Id: Ic048a843c43551021da39a16d94c3222201573dc
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Is't been deprecated since Mac OS X 10.5.
Task-number: QTBUG-74872
Change-Id: I8b1ad7aca6448883cb164fd0c4b329592ca60548
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It is finite and normal; it classifies as a zero; and it should not be > qfloat16(0).
Added tests to match.
Change-Id: I7874fb54f622b4cdf28b0894050ad3e75cf5d77c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Its limits() test was rather large and had some overlap with an older
qNan() test, that needed some clean-up (it combined qfloat16 values
with double and float values in ways that caused qfloat16 to be
promoted to another type, so we weren't testing qfloat16).
Renamed the qNan() test to qNaN(), separated out the parts of it that
actually tested infinity. Moved various parts of limits() to these and
rationalised the result. Split out a properties() test from limits()
for the properties of the qfloat16 type that are supplied by its
numeric_limits. Split out a data-driven finite() test to cover some
repeated code that was in limits() and extended it to test more
values. Added more tests of isNormal().
Fixed my earlier UK-ish spelling of "optimise", in the process, and
identify the processor rather than the virtualization as the context
where the compiler errs.
Change-Id: I8133da6fb7995ee20e5802c6357d611c8c0cba73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One of our compilers for emscripten coerces all signaling NaNs to
quiet ones, so won't do any actual signaling. Anyone relying on them
to do so shall be disappointed, so it's better that they know about it
at compile-time - or, at least, have the ability to find it out.
Put the signaling NaN producers (and remaining (test) code using them)
under the control of a feature that's disabled when numeric_limits
claims double has no signaling NaN. Assume the bootstrap library
doesn't need signaling NaNs. Sadly, until C++20 <bit>, there's no
contexpr way to test that alleged signalling and quiet NaNs are
actually distinct.
Added some auto-tests for signaling NaN, including that it's distinct
from quiet NaN. Any platform on which the last fails should disable
this feature.
Task-number: QTBUG-77967
Change-Id: I57e9d14bfe276732cd313887adc9acc354d88f08
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Some AMD CPUs (e.g. AMD A4-6250J and AMD Ryzen 3000-series) have a
failing random generation instruction, which always returns
0xffffffff, even when generation was "successful".
This code checks if hardware random generator generates four consecutive
equal numbers. If it does, then we probably have a failing one and
should disable it completely.
Change-Id: I38c87920ca2e8cce4143afbff5e453ce3845d11a
Fixes: QTBUG-69423
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The error was due to a compiler optimization bug, which is fixed
in 16.3.0.
This reverts commit 305f2c3aa6.
Fixes: QTBUG-77239
Change-Id: Idfb86ad5c3ec026518f0713c41f7ad744ab4d5db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Due to their sandboxed nature, UWP applications do not have access to
system settings like time zone.
Fixes: QTBUG-71185
Change-Id: I567a255f8adc18838fff79b81210faa094674722
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Separate quiet NaN from infinity and expand the nan-with-payload test
to a general test that bits outside the exponent don't break qIsNan().
Generally test more thoroughly and systematically.
Tests for signalling NaN shall follow.
Change-Id: Ib35dabacc8ebcc9a0761df38f6f419f0398d0e20
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We presently only support the UTC-based offset timezones that are
listed in the CLDR; and it doesn't make sense to list more than these
in the list of available zones. However, if someone sets their TZ
environment variable to a conformant UTC-offset string, we should make
sense of it even if CLDR doesn't mention it. Only do so as final
fall-back, as backends may handle the givne name better (some such IDs
appear in the windows-compatibility list, for example).
Added tests for the new UTC-offset time-zone names.
Removed one test that relied on them not being supported.
[ChangeLog][QtCore][QTimeZone] The constructor can now handle general
UTC-offset zone names. The reported id() of such a zone shall be in
canonical form, so might not match the ID passed to the constructor.
Fixes: QTBUG-77738
Change-Id: I9a0aa68281a345c4717915c8a8fbc2978490d0aa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In tst_QTimeZone::isTimeZoneIdAvailable(), a block of tests of
QTimeZonePrivate::isValidId() overlapped with what
tst_QTimeZone::isValidId_data() tests; so move out of the former and
adapt to use by the latter. At the same time, check that each
allegedly available zone *is* available enough that we can create it
and it's valid.
Change-Id: I3f7c8e2e3fbfb201747c7b769d691d7f17fc6b2a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the domain passed down is an actual TLD that's the subject of a *
rule, e.g. "ck" subject to *.ck, then we were finding no dot in it and
concluding that it couldn't be the subject of a * rule.
Added a test for the specific .ck case and commented on where we could
get some canonical test data that I tripped over while researching
this. Cross-reference the cookie-jar test from the QUrl test, too.
Fixes: QTBUG-78097
Change-Id: Id858a9dae22e6b306a68df3fc199e0160f537159
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no year 0 in the proleptic Gregorian calendar, so QDate()
won't be happy if asked for a date in it. Tweak scanning of the data
we get from MS-Win so as to avoid a date calculation that could
otherwise happen in year 0 when constructing
QDateTime(QDate(1, 1, 1), QTime(0, 0, 0), QTimeZone("Australia/Sydney")).
Added a test for this case, which Oliver Wolff has kindly verified
does reproduce the assertion failure. However, Coin is unable to
reproduce, as all its MS builds are configured with -release, so
Q_ASSERT() does nothing. (The relevant code then skips over year 0,
albeit for the wrong reasons, and gets the right results, albeit
inefficiently, leaving no other symptom by which to detect the
problem.)
Fixes: QTBUG-78051
Change-Id: Ife8a7470e5bd450bc421e89b3f1e1211756fc889
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecate the constructors, add guards.
Use a QStandardItemModel in tst_QCompleter::setters() instead.
Task-number: QTBUG-69410
Change-Id: If77298982bb3d0b5321ae1271fab3f33b196101d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Words should not be abbreviated.
Split a long line and reflowed some comments in the process.
Fixes: QTBUG-78008
Change-Id: I52d75409f02e2cecbed3e94d424617ad594c275b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The API is problematic for several reasons:
- the mixing of flags and enum in a single enum type
- the name "type" as somewhat overloaded
- the ease of misuse when comparing the result rather than testing
for a bit being set
In light of this, focus for 5.14 on the new isShortcut and
isSymbolicLink functions, thus migitating the problematic
isSymLink which conflates the two concepts.
Change-Id: I57e02321edd5061f69a775f04a0932ef89adf866
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This has its own locale data, extracted from CLDR. This data may
potentially be shared with other variants on the Islamic calendar, so
is handled by a separate base-class, QHijriCalendar, on which such
variants may base their implementations.
[ChangeLog][QtCore][QCalendar] Added support for the Islamic Civil
calendar, controlled by feature islamiccivilcalendar, with locale data
that can be shared with other implementations, controlled by feature
hijricalendar.
Fixes: QTBUG-56675
Change-Id: Idf32d3da7034baa8ec5e66ef847e59a8a2f31cbd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These functions tighten the integration of QMargins(F) with the rest
of the geometry classes by providing a way to apply margins to sizes
(and later, rects).
Apply them in a few obvious cases across QtWidgets.
[ChangeLog][QtCore][QSize/QSizeF] Added grownBy(QMargin(F))/shrunkBy(QMargin(F)).
Change-Id: I8a549436824cdb7fb6125a8cde89d5bf02826934
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This has its own locale data, extracted from CLDR.
[ChangeLog][QtCore][QCalendar] Added support for the Jalali (Persian
or Solar Hijri) calendar, controlled by feature jalalicalendar.
Fixes: QTBUG-58404
Change-Id: Id5c56a10db05a4fd612aafc01615273db81ec743
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These share their locale data with the Gregorian calendar, making them
virtually free to add. Still leave them out of the boot-strap build,
though.
[ChangeLog][QtCore][QCalendar] Added support for Julian and Milankovic
calendars. These are enabled by default, except in bootstrap builds.
Change-Id: I585045ed9e78c1e959957f6772b3e144093b701c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Replace foreach with range-based for loop, replace some int values with
the correct Qt flag enum as drive-by.
Change-Id: I41c52f6ae6c537fa9ad4f9e169485533936952d1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Qt has traditionally considered Windows shortcut files equivalent to
symlinks on Unix file systems. Because of NTFS symlinks, the
interpretation of shotcut files as symlinks is confusing.
In this change, QFileInfo treats shortcut (.lnk) files as regular files
but can follow the pointed object.
In addition, QFileInfo introduces a more comprehensive file type. So
that applications can make well-informed decisions about how to treat a
file system entry.
Based on the implementation of QFileInfo::type(), two inline helper
functions are introduced to QFileInfo.
1. isSymbolicLink, returns true if it points to a symbolic link.
2. isShortcut, returns true if it points to a shortcut.
[ChangeLog][QtCore][QFileInfo] Introduce QFileInfo::type() to replace
the isSymLink method.
Task-number: QTBUG-75869
Change-Id: Icc0dd52f9ad0ea50b0265d77ee0d0a3d25054e39
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As a macro, we can't directly deprecate it, but need to make it call
something deprecated. That is a new ctor with a new enum type
added. The type might be useful for other such ventures, so put it
into qglobal.h
Remove the QT_NO_UNICODE_LITERAL protection, as it's always false
these days, and QT_UNICODE_LITERAL is unconditionally #defined a 20
lines above.
[ChangeLog][QtCore][QStringView] Deprecated the (undocumented)
QStringViewLiteral macro. Just use u"" or QStringView(u"") instead.
Change-Id: I9141320225037e1bc6b7f920bf01a9d0144fdac2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are two cases:
In a BlockingQueuedConnection, QMetaCallEvent doesn't allocate memory
and instead passes already existing pointers through. A QSemaphore
is used to serialize data access between threads. So the constructor
taking a QSemaphore can be simplified to only accept an existing arg
array.
In a QueuedConnection, QMetaCallEvent needs to make deep copies of
the arguments, and memory needs to be allocated based on the number
of arguments. The previous code put the burden of memory allocation
on the code generating the event, while the memory was free'd by
~QMetaCallEvent. Instead, make it QMetaCallEvent's responsibility
to allocate and free the memory as needed, and adjust the code
generating QMetaCallEvents.
We can allocate the memory for types and pointers to arguments in a
single block, starting with the space for the array of void*, followed
by the space for the array of integers to avoid byte alignment issues.
By pre-allocating the space that's needed by three arguments, we can
avoid all mallocs for the majority of QMetaCallEvents.
Until this change has propagated through qt5.git, we need to keep the
old API that is still used by QtDeclarative around. Once QtDeclarative
has migrated to the new API, it can be removed.
Change-Id: Id7359ffc14897237ea9672dabae9ef199a821907
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When I initially added it, it was ony for QCborValue, but I never added
the tests. Turns out there were two bugs:
[ChangeLog][QtCore][QBitArray] Fixed two bugs that caused QBitArrays
created using fromBits() not to compare equal to the equivalent
QBitArray created using other methods if the size was zero or not a
multiple of 4. If the size modulus 8 was 5, 6, or 7, the data was
actually incorrect.
Fixes: QTBUG-77285
Change-Id: Ife213d861bb14c1787e1fffd15b70573d162042c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
For symmetry with QSize and QRect and because there were some users in Qt.
Port those users.
[ChangeLog][QtCore][QPoint/QPointF] Added transposed().
Change-Id: If4f23dbcf7d67983a6b1885e0d1d538115b49e2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends 2e1763d83a.
The new range ctors need deduction guides, since the compiler can't
deduce the value_type from a pair of iterators.
Change-Id: I3ec1e5f91305b317c443b6a70246be416b55bad9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Commit 8010e906d3 accidentally ended up
removing the removal-on-undefined-insertion check by calling insertAt
instead of insert, which had it. This patch moves the check back into
setValueAt.
Change-Id: Ic381e284d3da37e31c4eb29f79dfab9c55c2e3e9
Fixes: QTBUG-77204
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also optimized the existing QL1S overload of non-const operator[](), and
applied Extract Method refactoring to the other existing QL1S overloads.
[ChangeLog][QtCore][QJsonObject] Added insert(), remove(), and take()
overloads taking QLatin1String.
Change-Id: I5e737cf2d7d9ffb325d6981db1e4a6a9f093657b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
[ChangeLog][QtCore][JSON] Added overloads of functions taking key
strings as QStringView; in QJsonObject, QJsonValue and QJsonDocument.
Change-Id: I78b40aba8200003acfae257ff06f5f15737005e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
When successfully finishing a parse, it's reasonable to expect that the
QIODevice was advanced to the end of the input data.
[ChangeLog][QtCore][QCborStreamReader] Fixed a bug that caused the
QIODevice that the data was being read from not to show the entire CBOR
message as consumed. This allows the user to consume data that may
follow the CBOR payload.
Fixes: QTBUG-77076
Change-Id: I1024ee42da0c4323953afffd15b23f5d8fcc6f50
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Applications might receive paths with Windows' '\\?\' markers, which
indicates a long path to Win32 APIs, when the application is opened by
explorer via file association. Qt not ignoring those markers will fail
to open such files.
By stripping the marker in QDir::fromNativeSeparators, QFile, QFileInfo
etc automatically are able to handle such paths. QDir::cleanPath is
also documented to normalize separators, so it needs to be done there
as well.
[ChangeLog][QtCore][QDir] Remove Windows specific long path markers
when handling file paths with native separators.
Change-Id: I526a890614edee8c85b39fc12c98e7ddb6e0d793
Fixes: QTBUG-75117
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Current codebases assume isCompressed() implies ZlibCompression, since
there was no compressionAlgorithm() getter. In order to force codebases
to change, deprecate isCompressed() and force handling of the algorithm.
The replacement API is being introduced in 5.14, which is why the
warning is being emitted in 5.15 only.
Change-Id: Ief874765cd7b43798de3fffd15a9f5d978951ea5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows has a problem relating to cross-DLL variable relocations: they
are not supported. Since QMetaObject's link to the parent class is done
via a pointer, every QMetaObject in a DLL or in the EXE that derives
from a class from another DLL (such as QObject) will be dynamically
initialized.
This commit changes the meta object pointers in QMetaObject::d from raw
pointers to a wrapper class SuperData, which is almost entirely source-
compatible with the pointer itself. On all systems except for Windows
with Qt 6, it's binary compatible with the current implementation.
But for Windows with Qt 6, this commit will store both the raw pointer
and a pointer to a function that returns the QMetaObject, with one of
them non-null only. For all meta objects constructed by moc, we store
the function pointer, which allows the staticMetaObject to be statically
intialized. For dynamic meta objects (QMetaObjectBuilder, QtDBus, QtQml,
ActiveQt), we'll store the actual raw pointer.
[ChangeLog][QtCore][QMetaObject] Some internal members of the
QMetaObject class have changed types. Those members are not public API
and thus should not cause source incompatibilities.
The macro QT_NO_DATA_RELOCATION existed in Qt 4 but was called
Q_NO_DATA_RELOCATION and only applied to Symbian. It was removed in
commit 24a72c4efa ("qglobal: Remove
symbian specific features").
Task-number: QTBUG-38876
Fixes: QTBUG-69963
Change-Id: Id92f4a61915b49ddaee6fffd14ae1cf615525e92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Caused by commit 01301b0b34, which made
vector.resize(vector.size()) not to detach, which was used by fill() and
assumed that detaching happened. The test does not test the resize()
behavior, only that fill() is not broken anymore.
[ChangeLog][QtCore][QVector] Fixed a regression that caused fill() not
to detach, corrupting shared copies.
Fixes: QTBUG-77058
Change-Id: I6aed4df6a12e43c3ac8efffd15b1b527a8007bf3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Don't call realloc() with all its machinery when we know exactly what
to do: destroy the last element and decrease the size by one.
Extend the test, removing the unused Foo class for a new Tracker one.
Change-Id: I568eef4f6335669689fb16fd23af92cb4d6464bd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QLinkedList is still used in several tests. Add exceptions for
these subdirs.
Change-Id: I50ccd2a0892129d4a47aa4e2400211690da9a82d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There's like three pages of this when compiling the test :)
Change-Id: I923f2c4f5eff7c709977026666cc5b2a2cbfaa72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The call to QFileDevice::unsetError() in QSaveFile::open() does
not clear QSaveFilePrivate::writeError. Clear it in addition.
Fixes: QTBUG-77007
Change-Id: I5e5009750f1726d1c74c1b4eb1c33f3a5393fe4f
Reviewed-by: David Faure <david.faure@kdab.com>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some compilers (hello, MSVC) do not produce literal types in Qt
because their constexpr support has been blacklisted.
Therefore, amend the check for literal types in Q_ARRAY_LITERAL:
only do the check if the compiler supports constexpr.
Change-Id: I7cffe00dde447d975aa6a7d02248df9c351508ff
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the recursive mutex use case out of QMutex into a separate class,
unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of
the QMutex users now enjoy a constexpr QMutex ctor.
This change prepares for a real split in Qt 6, so that both use-cases
are no longer bundled up in one class.
[ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of
QMutex(QMutex::Recursive).
Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... except for tests, which manually undefine the macro.
Like QT_NO_FOREACH, this is a technical way to keep JSI-free
modules JSI-free going forward.
Change-Id: Icf1342da00a700f42f9e32a253d1cdb94c38dd7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We stopped storing the patch release number of Qt in the plugin metadata
in commit 7bd79b3cff (5.13), to make it
simpler to parse the validity of plugins before decoding the CBOR
payload.
Fixes: QTBUG-76855
Change-Id: I6aed4df6a12e43c3ac8efffd15adbbf83e928866
Reviewed-by: Liang Qi <liang.qi@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise "QVarLengthArray<Foo> x = {};" gives a warning. Also, some
compilers get confused about "QVarLengthArray()" this way.
Task-number: QTBUG-76199
Change-Id: I4296586c0181d3e6e82ca8b7b79aeb9a21645d1f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As planned when adding YearRange: now that it's merged up to dev, move
it to QDateTime, since we can add to the API at 5.14.0.
This follows up on commit 82ad4be4a2.
Change-Id: I81b6c2331121a71e2592514781c02c5756e70c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added QStringView overloads of join(),
filter(), and replaceInStrings().
Change-Id: I9636e21e2e43ed46cce0aa7fa23ab0710aa641ba
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... and schedule it for removal in Qt 6.
This appears to have come to some fame on the internet, so better add
a deprecation warning before we remove it in Qt 6.
Change-Id: I42d91d933f47dfd2d8d54c92358e9e46ced6bf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fix warnings:
Using QCharRef with an index pointing outside the valid range of a QString. The corresponding behavior is deprecated, and will be changed in a future version of Qt.
introduced by qtbase/c2d2757bccc68e1b981df059786c2e76f2969530 (5.14).
Change-Id: Ie6f0e2e3bb198a95dd40e7416adc8ffb29f3b2ba
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is usually the case on Android, where running this test would
require deployment of files to the emulator. This doesn't give us any
further testing that we don't already do by running this test on regular
Linux, so skipping the test instead if the preconditions aren't met.
Change-Id: I3722796634871213ba51c89ae7f40b19f954f2cb
Fixes: QTBUG-73566
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is sufficient to run this test on systems where we don't need to
set up dependencies and satisfy other assumptions the test makes. It is
safe to assume that if this test passes on regular Unix, then
QTemporaryFile will behave as expected on Android as well.
Change-Id: Iaf9a67d7c12b3acfd0992bab591c3f906b073d9e
Fixes: QTBUG-73564
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This version of arg(), unlike its QString counterpart, transparently accepts
views without conversion to QString, and is also extensible to further argument
types, say a future QFormattedNumber.
[ChangeLog][QtCore][QStringView/QLatin1String] Added arg(), taking arbitrarily
many strings.
Change-Id: If40ef3c445f63383e32573f3f515fdda84c7fe3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ifea720470541000481fbacc510b4cb589c9990d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Iff9d4be685bf360ad921e29a82cb878ae5c46180
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: If5d5a9d1c3f094d554110ada3b259f4d863e7121
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I60ffa6df83aaf520730cfbb1dd3f18a2d2e19977
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The check to disable the test was the one for QRegExp. This patch fixes
that.
Change-Id: I8783f582998cdd6ffe5dc5dafb3d53d56cd91213
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ibbd161700bf9e75736652b99dfa1ffd47e584249
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ie89641601763ff41eee5356a4b5ddee7ef810fbc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This patch adds the missing tests for the QRegularExpression class to
the QDataStream tests. Only QRegExp was tested until now.
Task-number: QTBUG-72587
Change-Id: I68ad1500ecbb041bbc6fbdff04b99171530cc0fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not removing QT_EMULATED_ALIGNOF logic from qglobal.h at this point, as
it might be used elsewhere.
Change-Id: Ie78922bb604a54aed03ab5b88e31a7f29a3a4de0
Fixes: QTBUG-73561
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without this, a local build of this test on macOS fails.
Change-Id: Ie03fa47ff0a54db752af47f223fbe5724cd9c976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code made two incorrect assumptions: that the strings used are "AM"
or "PM", or would be translated. Instead, the locale provides the
correct strings, and there is no need to translate. However, in order
not to break existing translations, we give those preference.
And that the AM/PM string is not longer than 4 characters, while in
e.g Spanish/Columbia locale the strings are "A. M." and "P. M.", ie 5
characters long. Also, the use of qMin in a function that is asked to
provide the maximum section length is wrong.
[ChangeLog][QWidgets][QDateTimeEdit] Use the information provided by
the locale to determine the AM/PM strings, unless they are already
translated.
Change-Id: I6d1b05376e5ac62fc58da2cdea2e6cb732ec6747
Fixes: QTBUG-72833
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QTextBoundaryFinder] Sentence breaking now
no longer breaks between uppercase letters and comma.
This is a deviation from the Unicode specification,
but produces less surprising behavior.
Fixes: QTBUG-75857
Change-Id: If1e78b3be3f20250d01100353ea7da6110985f82
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This is needed for cases where we use e.g. "file:///test.html?query#Fragment".
The fragment and query were already preserved for the qrc scheme. This
fixes it for the file scheme.
Change-Id: I5713e4a25372fdd55ac255b1c6228b4dea419244
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
NoDefaultConstructorRef1 was taking a reference of the input, which
meant in the first test it would get a reference to the temporary
created by the 1 literal. A temporary that would be out of scope by
the time we check its value.
Instead add a test with unique_ptr to test we can pass movable
temporaries.
Change-Id: I6b02377dfe30c82b6e71bfb3353a81ad81558ed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It should have been qfloat16(1)/qfloat16(infinity) in any case.
Sadly, that behaves no better than qfloat16(1.f/qfloat16(infinity)),
which was promoting the infinity back to float. So retain the check
for over-optimization (but make the comment more accurate).
This is a follow-up to d441f6bba7.
Change-Id: Iec4afe4b04081b0ebfbf98058da606dc3ade07f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... spotted with the brand-new checks for that in QCharRef.
The rx[i] == ~~~ check is clearly wrong, as rx is the regexp
we're building and `i` was not supposed to index into it.
The intended meaning was wc[i] == ~~~, testing if we were seeing
the closing bracket of a character set. We need to check for
that immediately for dealing with the special syntax of []...] where
the ] belongs to the character set (it can't be the closing one
as character sets cannot be empty).
Fix and add a regression test. Bonus: this code was almost
unchanged since 2009.
Change-Id: I958cd87fc25558e9d202d18b3dd4a35d0db16d8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <hjk@qt.io>
The value of NColorRoles got changed since 5.11. It introduced one more
role called "PlaceholderText" in the ColorRole enumeration.
When using QDataStream (5.12) to read QPalette objects from a file
written by 5.9 (<5.11), the processing results are inconsistent.
Fixes: QTBUG-74885
Change-Id: I14d57f9603a26e5890b4fd57c7e464c5b38eb3f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QScopedPointer uses normal delete, but we need delete[].
Change-Id: Id62a2c55f75ef4aa60580f5e04c4bf306a6dd3c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
