These arguments are specific to the build and changes to them are _not_
affecting configuration.
Change-Id: I8c46a0dbea8978f13e78c5cb8f41987f4fde09c8
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
The variable was not reset when interating through all the Qt targets,
which resulted in QtTest wronlgy depending on QtWidgetTools.
Task-number: QTBUG-75875
Change-Id: I24da495fa53e9163992a1ed53f5cd7e1c6da5e51
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Signing package may take more then 10s while calling echo really
should take less then 60s ;-)
Change-Id: I1798981492d1467bb8b20099ea705b08ea9b0914
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The number of CPUs is set implicitly by MAKEFLAGS and NIJAFLAGS.
Change-Id: Ie9296f9a7872253c696536d7b3d6235c7881d42b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Debug/release install targets can potentially install the same files which
leads to errors on install when running make with -j > 1.
If build_all is set, make the 'install' dependent of the new target
'debug-release-install' which contains the commands of 'debug-install' and
'release-install'.
Of course, debug/release is not hard-coded, but the content of the BUILDS
variable is used.
Change-Id: I67b504a95b83daf43bc89dcc0e3391b67e19c027
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Linux distros might not have a double-conversion library. Because
it is such an essential library for QtCore, compile and use the
the copy of the library bundled with Qt.
Also change library name to be a proper target with double colons,
so that in case the library is not found for some reason, the CMake
configure step would fail, instead of failing at link time.
Task-number: QTBUG-74133
Change-Id: I9f3b4298ae6e952891a7a89541d46878176bf1ce
Fixes: QTBUG-75891
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The qmake code to read output from dependency-generation was adding
QByteArray values to a QString, thereby tacitly converting from UTF-8;
this is misguided. Hopefully, the command emits its output in the same
local 8-bit encoding that QString knows to convert from.
Simplified needlessly verbose loops (that violated Qt coding style) in
the process.
Fixes: QTBUG-75904
Change-Id: I27cf81ffcb63ebc999b8e4fc57abdb9a68c4d2b3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The state of the module is done, not deprecated, so we shouldn't
recommend users to move away from it in all cases. There's also
no direct replacement for the DOM API.
Fixes: QTBUG-70629
Change-Id: Ifaff9757234bd68a411a3da1403c57bbbcb94693
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
TSAN does not understand the futex system call.
Now, in QMutex and QSemaphore usage, futex is always wrapped by
atomic operations that always do an acquire (before waiting) and
a release (before waking waiters). That alone realizes a
synchronizes-with, and since Qt uses std::atomics, TSAN knows
what's going on and does not complain.
But what if one uses futex directly, or we change the
algorithms, or introduce some other new synchronization
primitive somewhere? Luckily TSAN offers annotations for this
that we can use.
This patch annotates the main entry point for the futex syscall
with a pair of acquire/release semantics. A futex call
guarantees total ordering on the operations on the futex
word(s), whether the call succeeds or fails.
Change-Id: Ib80ff898c09fbb6fc73989247eb757bf70971a8a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This came about trying to remove the Java-style iterator. It was used to
iterate in reverse order, something QMap can't do, easily, due to lack
of rbegin()/rend(). Instead of writing ugly loops, use a vector of pairs,
fill it, sort it, then iterate over that one in reverse.
Change-Id: I09c8a2732a0699fff4c497778745523e20d348a1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The noexcept part should be clear. The constexpr should make the
compiler not create initialization code for static instances. This is
how std::mutex works[1], and Clang and GCC understand it. MSVC
doesn't.
[1] https://en.cppreference.com/w/cpp/thread/mutex/mutex
Change-Id: If9e4c6c0279f0024a659d5602d55e126224ca950
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Fixing this in Qt 5 would be BIC. Although it could be okayish, there
are many more classes that shouldn't be copyable. I need to go through
clazy's output and fix them, and would rather do this noise for Qt 6 and
leave Qt 5 alone and purely BIC free.
Added a move-ctor and move-assign, as well as swap(), deprecated
copy-ctor and copy-assign.
The new copy special member functions warn at runtime if they are called.
In order to not pollute client code with the warning strings, lock them
away by defining the functions out-of-line.
[ChangeLog][QtCore][QBasicTimer] QBasicTimer is now a move-only class.
Copying is now deprecated and will be removed in Qt 6.
[ChangeLog][QtCore][QBasicTimer] Added swap() member and free function.
Change-Id: Ic3e6a26f3989d4c8d125c06e8b0b825411c6e106
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Silence a warnings flood about qVariantFromValue(), QString::null
and QWeakPointer::data().
Change-Id: I73347190c0fa396b39b9efd00447cf24e48259a0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It seems like an optimization on the itemsDirty flag
caused a bug to be re-introduced. When a popup is shown
on a new screen, the itemsDirty must however be set to
ensure that new correct sizes are calculated.
Task-number: QTBUG-59794
Change-Id: Ifb5c233b1f9d4d38bd0cd7a9a71cc32ad3212f8c
Reviewed-by: Morten Kristensen <msk@nullpointer.dk>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
this also optimizes network post method handling
Task-number: QTBUG-75660
Change-Id: Ibb0d01f2cc2b2bc7802598c4f6f04b04882c12ca
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Handle a few more libraries that are used in qtimageformats repi.
Change-Id: Ia3b9a845bc6cb8ce98a477b9355011bbadc32c1a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add a prefix for generated .qrc files so for in-source builds we don't
end up overwriting htem.
Change-Id: I8eef582479eb45d67585f6aab87b288393bbadb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Implement some aspects of qt_parts.prf to simplify the top-level
CMakeLists.txt for repositories that follow the common qt structure
(src, tools, tests, examples).
Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When runing the scenegraph example sgengine, gets rid if this error:
QSGContext::initialize: stencil buffer support missing, expect
rendering errors
Change-Id: I7f3a82409bc2cf81cf8217876e527f9c45be3bf4
Fixes: QTBUG-74694
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Some qt modules need to find 3rd party packages for which there
are no Config files. We need to write custom CMake Find modules to
find those packages. These find modules need to be installed so that
they are used when a user consumes the Qt packages.
Automatically include and install these find modules if they exist,
as part of qt_build_repo_end().
Change-Id: I14aad35ed2999cac8bdda65ca4aeaf74d04fdb71
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
The previous fix where the Grammar comment style was changed to
remove the newlines was incorrect, because if you have
foo=1#comment
bar=2
after the Grammar comment ignoring, it would transform into
foo=1bar=2
which will clearly fail to parse, so the new line has to stay.
But we would still have the following case which would fail:
foo=a \
# comment
b
Apparently qmake things that's the equivalent of
foo=a b
but the grammar parses it as
foo=a \
\n (newline)
b
Thus the parsing fails because there's a newline and then some
weird 'b' token which the grammar does not expect.
The best fix I found is to preprocess the source, to remove
completely commented out lines.
So:
foo=a \
# comment
b
gets transformed into
foo=a \
b
Change-Id: I2487a0dbf94a6ad4d917d0a0ce05247341e9b7da
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
It doesn't make much sense to look for X11 related packages on
macOS and Windows by default. Usually they would not be there, and
as a result the configuration step would show a long list of scary
not found packages, and also eat precious configure time.
Change the conversion script to allow putting conditions around
generated find_package calls.
These conditions can be manually set in the conversion script
library mapping, using the emit_if argument,
which we do for the X11 and Wayland related packages.
They are also computed by checking which features use a given library,
and if the feature is protected by a simple emitIf condition like
config.linux, the relevant library find_package call will be protected
by the same condition.
If a developer still wishes to look for all packages, they can define
the CACHE variable QT_FIND_ALL_PACKAGES_ALWAYS to ON.
The relevant configure.cmake files are regenerated in this patch.
Change-Id: I6f918a94f50257ec41d6216305dae9774933389a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
cmdline implies console, so use that also to determine if a binary
should get a GUI flag.
Change-Id: I084e0a45785df96a7dc2c101af5305fbb39efbc3
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
There are still call sites that call Operation.__init__ with a string
instead of a list. Restore the handling of such a case.
Amends 5fe8a38af3
Change-Id: I2a4d5c5cb5b460bf02b6da02d42d8cc8d5eb4192
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
and plugins.
src/network/network.pro for instance depends on core-private, but
because we ignore adding QtCore as a public dependency, the exported
Config file for Network doesn't depend on QtCore anymore, so if a user
only links against Network, they won't automatically link against
Core.
Change-Id: I4a60ffae7e071927360b8ccf6b1b7479ab391060
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
For some reason the python comment regex that we used does not ignore
the line break at the end of a comment line.
This caused issues when parsing multi line assignments with comments
in between.
Use our own regex for comments to circumvent the issue. It was found
while trying to port the qtimageformats repo.
Added a pytest as well.
Change-Id: Ie4bbdac2d1e1c133bc787a995224d0bbd8238204
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Fix test_operations and do some small mypy cleanups along the way
Change-Id: I6586b5d3491e5dcf44252c098516f0922fa60420
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_CMAKE_EXPORT_NAMESPACE is used by the Qt packages to make features
available to the consuming CMake project. The value was moved to the
BuildInternals Config file, but that's wrong because consuming
applications not including the BuildInternals component would fail
to use any other Qt package.
Move QT_CMAKE_EXPORT_NAMESPACE to be propagated with QtCore package
again.
Amends 9542e78525.
Change-Id: I9841ac8c2828b00c0111d59e8976c889554e0ce1
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Current lates CMake has a limitation that it does not allow exporting
custom properties from INTERFACE libraries. GlobalConfig is such a
library, which means that so far all the global features were not
actually exported.
Copy the feature property values from GlobalConfig to Core. Because
Core is an actual shared library, it keeps the custom properties
when exported, and thus Core feature properties will contain the sum
of Core and GlobalConfig feature values.
Change-Id: Idde305cbaf9ab85ecfbe29522dcbac1c44022b17
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
