Instead of the System V one. An important difference is that
QSharedMemory does not clean after itself.
Updated the configure summary output to include this information.
Drive-by update to sorting order and I removed cpp-winrt from the
listing because there's a warning at the end if it is not set.
Change-Id: I12a088d1ae424825abd3fffd171e0eadcfd33426
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If a previous test in the same process or previously leaked a shared
memory or semaphore handle, tests could fail and cascade down. They
could also interfere with one another. So prevent this issue by
assigning a monotonically-increasing identifier per test function or row
tested and improving how we clean up those we did create.
This shows we need the API to explicitly clean up.
Change-Id: I12a088d1ae424825abd3fffd171db61d6b68a411
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
And deprecate the non-native key support API. Qt 7 may not even store
the old, non-native key.
Documentation in a new commit, when the dust settles.
Drive-by updates to the tst_QSharedMemory::attach row names, to fix
grammar and remove spaces and apostrophe.
Change-Id: I12a088d1ae424825abd3fffd171d3025c77f94d2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And deprecate the non-native key support API. Qt 7 may not even store
the old, non-native Qt.
Documentation in a new commit, when the dust settles.
Change-Id: I12a088d1ae424825abd3fffd171d2b549eeed040
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Common to both QSharedMemory and QSystemSemaphore, this will hold the
native key and will replace the concept of non-native key in those
classes.
Change-Id: Id8d5e3999fe94b03acc1fffd171c03197aea6016
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
This removes the second portion of the #if mess of shared code between
QSharedMemory and QSystemSemaphore for SystemV.
Change-Id: Id8d5e3999fe94b03acc1fffd171c073c2873206e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's not a lot of files, but it's actually more in the same dir than
mime/ does right now. I'm about to add two more files, though I'll also
merge a few more later.
Change-Id: Id8d5e3999fe94b03acc1fffd171bfe2ea36a35a7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QWidgetTextControlPrivate::mouseReleaseEvent() has early returns
implemented, e.g. when link has been right clicked or no selection
anchor has been found. These early returns, however, still consume
the event.
This leads to events getting lost instead of getting propagated:
As an example, a QLabel with rich text uses QWidgetTextControl. While
it propagates mouse press events back to its parent, mouse release
events get lost. A QLabel with plain text propagates both events
back correctly.
This patch adds QEvent::ignore() to the early return.
Since no test class exists for QWidgetTextControl, it adds a test in
tst_QLabel.
Fixes: QTBUG-110055
Pick-to: 6.5 6.4
Change-Id: I950f8c3f135793b01c59832835bb429db2282169
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As we are now processing the arguments with
cmake_parse_arguments(PARSE_ARGV, we don't need to pass the escape
characters anymore.
Task-number: QTBUG-99238
Change-Id: Iea9cda4fe0ae56043cc4d7db29ce53d9d737d645
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The 'WITH OIDS' was deprecated some time ago and removed with
PostgreSQL 12 so we have to adjust our test table creations. Don't know
why it was used in the first place at all.
Pick-to: 6.2 6.4 6.5
Change-Id: I6e18ac01e64368b1dd64e02bcb75fa70e05467a3
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The growBy() function takes the _increment_ of the size(), so needs to
add size() to increment for the call to realloc().
Add a test which hangs (vanilla build) or explodes (valgrind build)
without the fix.
Amends 26b227e128.
Done-with: Eirik Aavitsland <eirik.aavitsland@qt.io>
Pick-to: 6.5 6.4
Fixes: QTBUG-110412
Change-Id: I7ea91342fdcb779825c88013a3f86ba6d90ef530
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
various fixes like missing includes, linking, obsolete API usage, etc.
Pick-to: 6.5
Change-Id: I786bff396933b87cd39559ac8964d386ef368df1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It wasn't added when this class was created in 5.0 because we couldn't
add move constructors and still keep the ability to compile Qt with
C++98 compilers. We've forgot to correct this shortcoming since 5.6.
Fixes: QTBUG-109842
Pick-to: 6.5
Change-Id: I69ecc04064514f939896fffd17376b8243b73c52
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If an object had elements and then was emptied, it will have a non-null
d pointer, which wasn't taken into account in the comparison.
Fixes: QTBUG-109840
Pick-to: 6.5 6.4 6.2
Change-Id: I69ecc04064514f939896fffd17376aa18184653c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This overridden function is not used and also can't be triggered by a
synthetic input event in an auto test.
Change-Id: Id8b69b440a90c18cf5870e34804fae3e6607e49f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This got lost during the QStringView port that happend in Qt 6.0
(commit 548dcef089) because
QString::operator+=(QStringView) does not copy the nullness of the right
side, whereas QString::operator+=(const QString &) does.
Pick-to: 6.2 6.4 6.5
Fixes: QTBUG-84315
Change-Id: Ide4dbd0777a44ed0870efffd17399b772d34fd55
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Because Python 2 reached end of life. I wonder how this even works on
macOS, as my Monterey doesn't even have "python" any more.
Pick-to: 6.2 6.4 6.5
Change-Id: Ibddb9b0ada5a4bbaa64bfffd173b239c6c4b66f3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
ICU 50.1 was released May 11th, 2012. Despite of the restriction, all
currently supported operating systems will continue to be supported.
All mismatches described in QTBUG-99715 are fixed in this version.
Restricting to 72.1 (latest version as per January 2023) or 63.1 (2018)
would still exclude e.g. RHEL 9.0, which ships version 56.1.
Task-number: QTBUG-109505
Pick-to: 6.5
Change-Id: Ic5cd7927d6f5fb60a89423c305796a9ed311bfa2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Despite being move-only, std::vector<unique_ptr> advertizes
is_copyable:
https://quuxplusone.github.io/blog/2020/02/05/vector-is-copyable-except-when-its-not/
Our combined reallocation and resizing function, reallocate_impl(),
runs afoul of this when it uses std::is_copyable in a constexpr-if to
implement resize(n, v) without running into problems with move-only
types: the trait is true, but actual instantation runs into a
static_assert in the STL implementation.
To fix, move the problematic resize functionality out of
reallocate_impl() and into the resp. resize_impl overloads. The shrink
functionality remains in reallocate_impl(), because there are many
more users, and it only requires destructible<T>, which isn't
constraining at all.
Amends a00a1d8806.
Fixes: QTBUG-109745
Pick-to: 6.5 6.4
Change-Id: Ibc5b9cf5375108eb3d8f6c8a16d4fd02dadd73b1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As discussed in API review, the default-constructed T() returned from
a mismatched data<T>() call is indistinguishable from a real T with
default state.
To make them distinguishable, return optional<T>. Call the new
function value<T>(), mimicking QVariant::value<T>(), and suggested in
API review, because data() is usually used to return raw pointers, not
values.
Remove the qWarning() on requestedType and actualType mismatch, as the
new function can be used in std::get_if/dynamic_cast-like if-then-else
chains, in which failure is part of the normal operation, and a
warning message misplaced:
if (auto loc = perm.value<QLocationPermission>())
~~~ use *loc ~~~
else if (auto con = perm.value<QContactsPermission>())
~~~ use *con ~~~
~~~ etc ~~~
Pick-to: 6.5
Change-Id: I799a58e930307323ebce8f9ac50a42455e9c017f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Following the QRect, add functions converting the QString to native
emscripten::val and back: fromJsString, toJsString
Change-Id: I2d0625ede3bbf7249e2e91b8de298b5b91df8ba2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The new test:
- checks the properties of stateful Q<Typed>Permissions work
- ensures that piping a Q<Typed>Permission through QPermission
maintains state
- also ensures that assignment of a Q<Typed>Permission to a
QPermission works (via QPermission(Type) + move ctor)
Pick-to: 6.5
Change-Id: I340e49b1ecc665702ccab26d9050ca158b0e7885
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test body has been inside an #if 0 for long, remove the test
altogether. The part that loads libthai does not check anyhing
meaningful.
Task-number: QTBUG-109954
Change-Id: I8ce006a14e4cf926b668e958d4b2343f965a5fb6
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
It had various QVERIFY()s of != and >= checks: convert these to
QCOMPARE_NE() and QCOMPARE_GE() checks.
Change-Id: Ida6f7dca726187f7837da0d805549d9c582f946a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
When rows are hidden (implicitly or explicitly), then their layout data
does not get fully updated. If rows get hidden after the layout data has
been calculated once, then we must make sure that their indices are
reset. Otherwise we might access array indices that are out of bounds
when the layout data structure gets resized to fit only visible rows.
For good measure, skip entirely over hidden rows when accessing the
layout data when arranging the widget.
Fixes: QTBUG-109237
Pick-to: 6.5 6.4
Change-Id: I4d6943b6a110edb61f60ce78d31f0fc64b5cc03d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QDateTimeEdit has such reset functions for the minimum/maximum
range properties, this makes QCalendarWidget consistent with the
simpler editors.
Fixes: QTBUG-62448
Change-Id: Iabb89f599e4996f00488a885a5b8a009471838b3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It's used from three different tests so it can only have one
definition, but when batching it has three of them.
Task-number: QTBUG-109954
Change-Id: Idfddd313a1fe447968066118529527e3d4214823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For most territories, if we specify only that territory, we should get
a locale specific to that territory. There are exceptions for various
reasons, but check that it's true in most cases, at least. In the
process, convert two QVERIFY(... == ...) into QCOMPARE(..., ...)
Task-number: QTBUG-64940
Change-Id: I7590f20f37b0b459aafb3d1d08f6eb77932fa027
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To be extended as neeeded.
Pick-to: 6.5
Change-Id: I57d2f55f67de073fe3e4916b7ba655342cf661dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Just describe the row instead. We'd lose the original input in case of
failure, so I added a class to print that value on destruction. Example:
FAIL! : tst_QAlgorithms::countLeading64(0) Compared values are not the
same
Actual (qCountLeadingZeroBits(value)): 63
Expected (expected) : 64
Loc: [tests/auto/corelib/tools/qalgorithms/tst_qalgorithms.cpp(374)]
QWARN : tst_QAlgorithms::countLeading64(0) Original value was 0x1
Pick-to: 6.4 6.5
Fixes: QTBUG-109958
Change-Id: I69ecc04064514f939896fffd1738b1119cd80cf8
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To make space for a tst_qpermissions auto-test.
Pick-to: 6.5
Change-Id: Ic9ead8afa7ecd035fd5ed56c756f0156828c6705
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
tst_qstringapisymmetry needs to use the same collation testability
criteria as tst_qcollator, that is, the locales that may be tested
without ICU and not on Mac nor Windows are only the system locale and
C locale.
Task-number: QTBUG-109954
Change-Id: I69f19ae28b3a16b3827c1eee62ae59fcfdf45209
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 4096667d66.
Reason for revert: <Screen shot workaround is flaky.>
Change-Id: I6e01cc584c094d0d0b8c1544b9daf72d648dd002
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qcollator_posix.cpp is included if ICU is not used and the OS is not
Win nor macOS. Reflect that fact in tst_qcollator instead of using
alternative means which breaks with new platforms that use the
posix collator.
Task-number: QTBUG-109954
Change-Id: I592500ce9626efbcc9377cecf6641967f978c6da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are numerous conflicting symbols in the tst_qstringbuilder\d
variants when batching those together. Remove the linkage from symbols
by putting the common include stringbuilder.cpp in an unnamed
namespace.
Task-number: QTBUG-109954
Change-Id: Ic2a745795b57482c90c9def7667a1145cdb19854
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to an XCB library change, QXcbBackingStore::toImage() cannot be
safely assumed to return an image identical to QWidget::grab().
The test functions fastMove(), moveAccross() and moveInOutOverlapped()
relied on QXcbBackingStore::toImage() and failed.
They were backlisted on Linux/XCB.
This patch obtains a screen shot instead of an image from the backing
store on XCB platforms. It processes events until the screen shot
matches QWidget::grab(). It makes the test fail only if the comparison
times out.
The patch also removes the BLACKLIST file, containing only the test
functions mentioned above.
Fixes: QTBUG-109036
Pick-to: 6.5 6.4
Change-Id: I26dd5b89dc62b313db066a285f6ad7d4d92baaf2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also replace the C array with a std::array and (some) indexed loops
with ranged-for loops. Most loops need the index in one way of
another, so can't easily be converted to ranged.
Pick-to: 6.5 6.4 6.2
Change-Id: I7fa05f22de9df6c68ec5797c9583476a3881532c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
(Un)Register the custom recognize in init() and cleanup() instead of
initTestCase() and cleanupTestCase(), so that a new recognizer is used
for each test function.
In the test functions, use a scope guard to unregister the locally
registered recognizers to make sure that in the case of a failing test
and early return, the recognizer is removed.
Pick-to: 6.5 6.4 6.2
Change-Id: I4fe9509f35474514ef55191d799e6707199fe853
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Setting a negative line width does not make much sense, but in
earlier Qt versions, this work the same as if the line width was 0
(just give you the minimal layout given wrapping constraints).
But since 991c056438, we check if
current width > line width at an earlier point, and because 0 > -1,
we would exit immediately before adding any characters to the text
line.
To restore the behavior in earlier versions, we set the minimum
possible line width to 0.
Pick-to: 6.5
Fixes: QTBUG-109474
Change-Id: Iceadd5135681f61b30de8221853834983941c5a4
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: hjk <hjk@qt.io>
Clients who called the base-class implementation in QDialog would
as a result start hitting the canBeNativeDialog code path at the
start of QDialog::setVisible(), which would show the native dialog,
but without updating the QWidget visibility state.
To keep things 100% compatible, we shuffle the implementation of
QDialog::setVisible() into QDialogPrivate, which allows us to
override it in QMessageBoxPrivate and QErrorMessagePrivate.
The existing subclasses of QDialog that override setVisible have
been left as is, to not cause any unintended behavior change.
Pick-to: 6.5
Change-Id: Icafe31a7b84a75049365e4e04b80492de08614d2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
