Widgets module is no longer required. Removing it allows this test to
be run with a qtbase configured with -no-widgets, which saves
compilation time.
Change-Id: Id99d3f25cd7b227aa81e1cf1ac7b6fd5227ac4c4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
A new define for better vectorized compositioning had a mistake that
caused some sources to be converted to grayscale when composited.
Added two 10 bit per channel formats to the lancelot test to catch
regressions in the future.
Change-Id: I1c468e6b93d68185e517fc0d44c6c927f9f7135f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
There was a race condition between QObject::disconnect() and
QMetaObject::activate() which can occur if there are multiple
BlockingQueued connections to one signal from different threads and
they connect/disconnect their connections often.
What can happen in this case is:
T1 is in activate() method and T2 is in disconnect() method
T1 T2
locks sender mutex
selects next connection
unlocks sender mutex
locks sender mutex
sets isSlotObject to false
creates QMetaCallEvent derefs connection
posts event
Two things can happen here:
1. Connection can still be valid, but it will have isSlotObject==false
and callFunction will be used instead of slotObj
2. Connection can already be invalid
To fix it mutex unlock should be moved after QMetaCallEvent creation.
Also there is another case, when we don't disconnect but delete the
receiver object. In this case it can already be invalid during
postEvent, so we need to move mutex unlock after postEvent.
Change-Id: I8103798324140ee11de5b4e10906562ba878ff8b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Storing them in a single byte is the first step towards the Short
QDateTime Optimization.
The bump in the "private version" by 10 is to accommodate possible
changes in the Qt 5.7 branch.
Change-Id: Id5480807d25e49e78b79ffff144a59420457bcf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the compiler supports C++11 alignof, let's use it. No point in
perpetuating the use of __alignof__ or __alignof.
There's a fallback implementation in qglobal.h that works even without
compiler extensions. We can't drop it just yet (alignas is not a
required C++11 feature), but at this point I doubt that fallback is used
anywhere anymore.
The tst_compiler test was wrong to use alignof(variable). That's not
permitted by the standard nor would it work with our fallback
implementation. MSVC 2015 enforces this, but ICC, GCC and Clang don't.
Change-Id: Ifea6e497f11a461db432ffff1448abfa86672c63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is not exhaustive, but was enough to discover ICEs.
Change-Id: Ib60be1d298a66b72e3eb9b75ad538f0bf15b5f62
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Simo Fält <simo.falt@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, a tab's text is used as its accessibleName.
When a tab's text is empty, there is no API to set
the tab's accessibleName. The two APIs are added to
set and return the accessibleName property of a tab.
Task-number: QTBUG-46530
Change-Id: Idf88b5f905fe66c6365ea0eeb650e74211db90e1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Some strings were drawn with a different size or scaling than what the
string itself said, causing confusion.
Change-Id: I4b187cba6d467cfa0900576bdf451052baa806e6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Subjects each *.png file that matched grep -law "sRGB" to:
pngcrush -ow -brute -rem allb -reduce
(Two needed -force but did get smaller.)
Change-Id: Ia030f0bc1d3617ba716bcc26677ff919ef58423c
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Math functions are linked in by default on INTEGRITY.
Change-Id: I737ae87c02b2321caca3975f69525731e839d1a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The protocol was originally developed by Canonical, currently supported
by Unity and Plasma.
Adjust some tests to use the non-native menu bar when they require it.
[ChangeLog][XCB / X11] QMenuBar uses the unified D-Bus AppMenu menubar
when the desktop environment supports it.
Change-Id: Iea74b40522573bcc4f70168fe7fa2a49b4f3fc21
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Also, bump the TypeInformationVersion field in qtHookData, to notify
the Qt Creator developers that the offset of QFilePrivate::fileName
was changed and dumpers should be adapted.
Change-Id: I71bc5f509b733c0ab3430cd47ff08961f0388839
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
By default, the read chunk size is QIODEVICE_BUFFERSIZE and the write
chunk size is 0 (which means that we don't use the internal write buffer).
Derived classes may override these values to define the size of
QIODevice's write buffer or to optimize the read buffer use.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
Change-Id: Ib732bc94be8da8a5514a6e5dcc04445895f130d8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some sequential devices allow data to be partitioned into several
channels that have the property of independently sequenced delivery.
Supporting such devices uniformly requires a unified API which provides
the user with a uniform concept of multistreaming.
This patch is based on QProcess's multiplexing model and introduces
the following features:
- ability to get the number of channels;
- multiple internal read/write buffers;
- channel selection functions;
- notification signals on channel activity.
To keep the source code compatible with single-channel implementations,
introduce a private class that references the current read buffer and
hides multistreaming internals from the user.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added multistreaming to QIODevice.
Change-Id: Idcaa6a618927c101c4c7284d2a633913be6a6ee2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Introduce a transaction mechanism that gives the ability to read the
data atomically. Current implementation supports transactions for both
types of devices. For sequential devices, it records the whole input
stream during transaction. For random-access devices, device position
is saved when transaction starts. If an error occurs, the application
may be able to recover the input stream by rolling back to the start
point.
Also, QIODevice::peek() was rewritten to make use of transactions
internally. The replacement of QIODevicePrivateLinearBuffer by
QRingBuffer is closely entangled with that, which makes it unfeasible
to do separately.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added QIODevice's startTransaction(),
commitTransaction(), rollbackTransaction(), isTransactionStarted()
functions to support the read transactions.
Task-number: QTBUG-44418
Change-Id: I3564b343ebeeaaf7c48a1dcdb7ef0a7ffec550f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This test seems to be quite broken on OS X: qWaitForWindowExposed returns
too early (while no window is on screen) so gestures can not be dispatched
QApplication::topLevelAt(pt) - returns null.
Use qWait + isExposed combo instead (similar to qWaitForWindowExposed, but
there is no isExposed test before the loop).
Change-Id: I85fbd773ccce0ca92b2dceb1749d67ef767aa0cf
Task-number: QTBUG-49849
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Commit ed0c0070 introduced qt_subtract_from_timeout but used it
incorrectly in several places.
Change-Id: I80ea16088707929a45d5a61ec6f3370f8e63d1cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case also for 32 bit systems.
Change-Id: Ia231bcb9b0102c28483d932be18767662b7a6afd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that we can use std::forward, and that the compiler
synthesizes move special member functions when it should.
MSVC only supports the latter since the Nov 2013 CTP,
which, for our intents and purposes, means VC2015.
Change-Id: I8d8e4ae064abce90076a05b3b637950ab7d21dac
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Check that it works on C arrays, with auto type deduction
and with types that only provide free begin()/end()
functions that can only be found through ADL.
Change-Id: I760722a0f56c9ebe967070ff68af90b96ed77e66
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Apple changed some enums in the 10.11 SDK from being just:
enum { ... }; typedef uint64_t Foo;
to:
typedef CF_ENUM(uint64_t, Foo) { ... };
which in C++11 mode expands to:
typedef enum Foo : uint64_t Foo; enum Foo : uint64_t { ... };
The use of strongly typed enums means we need to explicitly cast from
int in the places where we know what we are doing.
Change-Id: I7c8cfdbc0549471a3292de14d8b766fe17133e25
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The test blacklisted have been found using CI builds logs.
Change-Id: Iac07316862cff9b5085dacdf9f35e691cff09384
Task-number: QTBUG-27571
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Iae76d852a1657bfb6d88e84515f30bd2f1dece6b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Mark include directives in qevent.h for removal and preemptively
add missing headers in code base.
Change-Id: I81011d7bfad4a09d80deeda6d1bed67b5c0e63c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This test caused problems because it relies on the at-spi services to
run. In addition it could trigger orca (screen reader) to be launched
as a side-effect of the dbus call to the screen-reader-enabled setting.
Instead just export QT_LINUX_ACCESSIBILITY_ALWAYS_ON to make sure that
accessibility will work. This means we won't test the dbus startup any
more, but the test will be reliable.
There is still a dbus call to org.a11y.Bus to launch the service in case
it's not running yet.
Task-number: QTBUG-27732
Task-number: QTBUG-44434
Change-Id: Idb86ed98ca4b47cb209027c8b41529e7e5285197
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
In some cases it's not possible to use QT_HASH_SEED, specially when
we need to set the environment variable from inside the application,
as dynamically loaded libraries or plugins may create static QHash
instances. That would set qt_qhash_seed to a value different from
-1 and skip the env var value.
For those cases, and when we still want to set qt_qhash_seed, we
provide a way to enforce its value.
Auto-tests accessing qt_qhash_seed directly have been updated
accordingly. Usage in qdoc, uic and rcc has been left as is
for the time being.
Change-Id: I3b35b4fa0223c83b1348a6508641905a2a63266f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt Creator needs to be able to determine structure sizes and data
member offsets for certain private types even in the absence of debug
information.
It is sufficient to keep and test the actual data sets on the Qt Creator
side, as long library provides a hint which data set is needed.
So far, HookDataVersion was meant to be used for that purpose. To
make it more explicit, this patch introduce a TypeInformationVersion
field in qtHookData.
Change-Id: Ia1c3c6f62f314d63c4df289ef456f047c5e84cf4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former didn't account for ascent and descent.
Change-Id: If741f22f7e79ac3c13e58f2966358010d9f9ec81
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
in tests/auto/other, tests/auto/printsupport and tests/auto/xml.
Change-Id: I28cbdc89d36791f179425f17f90b697c60660938
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
Merely filling with Qt::transparent is not enough, as the default blend
mode of QPainter is QPainter::CompositionMode_SourceOver, where the alpha
of the source is used to blend the pixel on top of the destination. The
destination in the case of an FBO may contain garbage, and we end up with
the same garbage as the alpha is 0.
This was evident when running the ellipses and porter_duff/porter_duff2
tests on OS X. These tests can now be un-blacklisted.
Change-Id: I315fa764fa29fb3a06e38945a738a6feadf4502d
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
ad9698713f reduced the curvethreshold
for wide lines, to fix QTBUG-46151. But as a side effect, the
threshold was increased for lines of widths >=0 and <4. This commit
fixes that, and also adds a lance test for the issue in QTBUG-46151.
Change-Id: I52507db622435fe1d2646640cb0bd9cd8222e453
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When the server could not be reached, the test previously,
produced:
FAIL! : tst_NetworkSelfTest::smbServer() 'smbclient.waitForFinished(5000)' returned FALSE. ()
- Loc: [tst_networkselftest.cpp(992)]
QWARN : tst_NetworkSelfTest::smbServer() QProcess: Destroyed while process ("smbclient") is still running.
Fix this by:
- Using QStandardPaths::findExecutable to locate the binary instead
of test-wise starting it.
- Add a function to ensure process termination.
- Pass a timeout argument to smbclient and pass an interval
depending on it to waitForFinished(), which should prevent
having to kill the process in most cases.
- Add proper error message
Change-Id: I1cbc76ca69aec7d1e0e880685bed54b0ba7f21c7
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
baselineexample.pro is missing CONFIG += testcase, so,
make check succeeds without doing anything. The test seems
to connect to some network server to retrieve baseline images,
but that infrastructure apparently no longer exists.
Change-Id: I98f4fe5ef8a508fda90e408df2781a944eb99a60
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I1a963bdc24f7657731dc0374a8e2c3cbaa49f126
Task-number: QTBUG-22775
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
We have configure -headersclean now
Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
