Changes internal data-size and pointer calculations
to qssize_t.
Adds new sizeInBytes() accessor to read byte size, and
marks the old one deprecated.
Task-number: QTBUG-50912
Change-Id: Idf0c2010542b0ec1c9abef8afd02d6db07f43e6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling the class-method dotProduct(x, x) in order to then take its
square root is a clumsy way to obfuscate x.length() - and lacks its
efforts (clumsy though they are) to limit rounding issues.
Change-Id: I1dc1f38764651bc70c0620e286cb5625f505ddbf
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Especially in examples, where we should show off our convenience
functions, prefer calling these functions over doing arithmetic with
M_PI (or approximations thereto) and 180 (give or take simple
factors). This incidentally documents what's going on, just by the
name of the function used (and reveals at least one place where
variables were misnamed; the return from atan is in radians, *not*
degrees).
Task-number: QTBUG-58083
Change-Id: I6e5d66721cafab423378f970af525400423e971e
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It should be easier to translate sizes in bytes to human-readable
strings consistently rather than having to repeat this code (and the
string translations) in various places. The FileDialog in QtQuick.Controls
has a use for this, too.
[ChangeLog][QtCore][QLocale] Added QLocale::formattedDataSize() for
formatting quantities of bytes as kB, MB, GB etc.
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I27bca146c3eba90fa7a5d52ef6626ce85723e3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no visible cursor on iOS, so updating the image is a waste
of time. Removing this does in fact speed up rendering of the strokes.
Change-Id: If958fabeefd4273644707277d4a084855d415bb1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It was backwards from the expected value, consistently on iOS and xcb.
It was already that way in 5.6, and we don't document which way
is clockwise. So it seems to be just the example which is wrong.
Change-Id: Ibbdadc2ae240017abc87439a2694fb5fbd3d07f8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Each stroke is a polygon (quadrilateral) connecting the previous
tablet event point to the current one. Previously we used the same
width for both ends of the stroke, so rapid changes in pressure caused
steps in the stroke width. Now it is tapered from one end to the other.
Change-Id: I909a2e85334a1a6e20fd28ee4babf6825da36612
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
They're deprecated since C++11 and removed in C++17.
Change-Id: Ia2acd9312707bfee96838743645a04ae1780e5dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With disabled gui module qmake in the directory examples/gui and
examples/widgets failes with:
Project ERROR: Could not find feature opengl.
Fix this by protecting 'qtConfig(opengl)' by 'qtHaveModule(gui)' as
already done in examples/examples.pro.
Task-number: QTBUG-60488
Change-Id: Ia842124e818e8c81d41d2b8e3b8905bf1dee58ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The documentation of QSyntaxHighlighter still uses the deprecated
QRegExp class. This patch updates the code samples as well as cleanup
some typos.
Change-Id: I87b525fddb560b7c5bb38f96d9aaceadb594f76c
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
- when appending to another string
- when just comparing
- when just calling toInt()
Change-Id: I6960784569b83bfd3e3640a8c04f2f909c293449
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Does not make much sense now that we can connect to lambda functions
[ChangeLog][QtCore][QSignalMapper] QSignalMapper is now marked
as deprecated.
Change-Id: I89135f23fdf16b42142a125eb7c9a86084c90bfc
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the treemodelcompleter example to use the new QRegularExpression
class in place of the deprecated QRegExp.
Change-Id: I9fa91ca6e847603de37019e4ca86fc69a51a3772
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Using std::atan2 gets the right answer directly from dy and dx,
without having to fix up quadrant as we needed to with acos (albeit we
have to negate dy in some cases, to match prior sense of angles). In
the process, it avoids explicit division, which would be an error when
the line's length is zero.
Change-Id: Ia2923159d38834e08e6f15cbff6766ed419fa804
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This adds the tabletTracking property in the same way that mouseTracking already
existed: there is a WA_TabletTracking attribute, and a TabletTrackingChange event
to notify when it changes. So for widget applications it's an opt-in feature.
QtQuick applications don't yet make use of tablet events, but when they do
in the future, we don't yet have a mechanism to turn the move events off;
it remains to be seen whether that will be necessary.
[ChangeLog][QtWidget] QWidget now has a tabletTracking property, analogous
to mouseTracking, which will enable TabletMove events while the stylus is
hovering, even if no button is pressed. This allows applications to show
feedback based on the other tablet event properties such as rotation and tilt.
Task-number: QTBUG-26116
Change-Id: Ie96e8acad882b167e967796cdd17f1ad747a2771
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Update the arthur code sample to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Ic7efd4466b4c0fa50170b80ebb22fcb3624399ce
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the codecs example to use the new QRegularExpression class in
place of the deprecated QRegExp.
Change-Id: Ibd60b7256071f8166c4bf38e6a40935494c3cf3f
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the settingseditor example to use the new QRegularExpression
class in place of the deprecated QRegExp.
Change-Id: I07e34bf916bdde161c4253fca70b853061cd589b
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the stylesheet example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: I7061b8fd462ff012cb67bfdade656b3bfe442dd8
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Previously, when clearing the pattern by clicking the clear
button, the result match list would display a list of empty
matches since apparently an empty pattern matches as many
times as the subject is long. This is confusing when using the
tool.
Restructure RegularExpressionDialog::refresh() so that it bails
out if the pattern is empty or invalid.
Change-Id: I8119a75db50cead3f64394016e3390a9bf7d0bf7
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Update the classwizard example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: I125664549e249c4156f8c664fac7648f1c41f9d5
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the licensewizard example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Ib6e0ee9ec802e83540b1c37846b99378395fe0ec
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
The example has already been ported to QRegularExpression however part
of the documentation still referred to the QRegExp class. This patch
updates the documentation to match the new version of the code.
Change-Id: Id433d0b28deae0c4f702c0c54d2704174f8c7689
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the addressbook tutorial to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Ibea9252ab8fe1d12e6fc862fa70229ca6efe0804
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
We can use QOverload since Qt 5.7 (it depends on Q_COMPILER_VARIADIC_TEMPLATES
which is required since Qt 5.7).
Use it in the examples to show the best practice.
qOverload currently can't be used because it requires c++14.
Change-Id: I94a3c0db9d551fe169fa3d19c07ec0b329d5946c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
xcode variable expansion should be done exactly when xcode is used.
Change-Id: Icea8cb7bf9a51811052789bd66354b1b165127d6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a vestige from an earlier version of the watchos introduction.
amends 57378a108.
Change-Id: I7d15149b94d12d84e041079b563175bd4e385d50
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A separate flag is no longer needed now that simulator and device builds
are not exclusive any more (*) - both 'simulator' and 'device' being set
at the same time is a sufficient indication (uikit/default_pre.prf sets
this up according to the simulator_and_device feature and the
QMAKE_MAC_SDK variable).
(*) xcodebuild mode actually still uses exclusive builds, but this is
activated locally in uikit/default_post.prf, and uikit/xcodebuild.prf
implements the actual build passes manually anyway, so this change does
not affect it.
Change-Id: Idf173a7bfeb984498d3a49ed6b8d1a16da6c2089
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Modern platforms such as macOS and Windows support large fancy icons
in the system balloon notification. We just need to pass the icon into
platform plugin.
[ChangeLog][QtWidgets][QSystemTrayIcon] Support custom icons in showMessage()
Task-number: QTBUG-49283
Change-Id: Iaeca36fe1bf350eae34d105549010ecbedf9c0a1
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
This is only when the attached MIME data contains text, and we
fall back to rendering that text into a pixmap. It requires
getting the device pixel ratio from the source which, for now,
may be a QWidget or a QWindow. Other cases may exist, but that
would bring more dependencies than desired.
Similarly, it fixes the draggabletext example. Other examples
would require either to get updated pixmaps or change substantially
in order to support HiDPI (e.g., the fridgemagnets example).
Change-Id: I66198214233e3e06c87505744e2aaa9691fe1bb6
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
- Simplify the code, remove unused members
- Fix the translations of plurals to use %n
- Add tooltip displaying full paths in list
- Add context menu allowing to copy the name and open
- Display the correct slashes on Windows
- Connect the returnPressed() signals of the line edits
- Make the search recursive
- Do not search binary files by checking the mime type
Change-Id: I3663799c88931db1f58c03ea35211e7ab03737ec
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Port to Qt 5 connection syntax.
- Remove unneeded member variables.
- Adapt to screen size.
- Add a tab widget with a hex dump view to the preview dialog.
- Handle conversion errors in preview dialog,
add status label displaying errors and warnings about failures
and invalid characters encountered.
- Fix translated messages.
Change-Id: I916100c903e73d0d2326523753ed7398b1c34df0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Use Qt 5 connection syntax.
- Introduce helper function to calculate the square size, remove
the existing 24 pixel limitation since that makes it impossible
to render 20pt fonts.
- Add filter chooser for font filters.
- Add menu and info dialog showing DPI and default fonts.
- Streamline code
Change-Id: I0cd4d0475b5a7ed3c475de7a413abebbe688dfe2
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Examples should show idiomatic Qt, and QSignalBlocker is idiomatic
since it's inception in Qt 5.3. Just updating the examples was
forgotten.
This commit makes good for that.
Fix coding-style issues as a drive-by.
Change-Id: If138e87ea2ab7a444599734113f7cc6df11fb42d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
The (example) code used a real to hold 360 / 7, which is of course 51,
discarding the 3/7 that was most likely meant to be kept. Noticed by
Coverity (CID 22364). Use 360.0 instead of 360 to get more accurate
results.
Change-Id: Ifdfbb932589d8ea728710e8b656af651c9f8a7d2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The signal was connected to the wrong slot.
Regressed in 2fe56e37ed.
Change-Id: I33135fc79c3585dfbe0f6ebc04f819e919ed9ed7
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Examples should demonstrate best practice, and we can use the keyword
directly nowadays.
Change-Id: I1f122e5caceca17290757ffbaf3d660e7daa9ae4
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
This enables people to toy around with the option and check
what impact it has.
Change-Id: I8b49c31211cc48721b3326eea48b4e74967b1a92
Reviewed-by: Sérgio Martins <iamsergio@gmail.com>
as in other examples which come with plugins, use an additional
hierarchy level which contains the app and plugin subdirs.
Change-Id: I2487755967aa3474c337c8c8af10be49627b63d0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
It's urgent to fix the issue that on Android, it became impossible
to interact with any widget or MouseArea which handles only mouse
events but not tablet events, using the stylus, because stylus events
are sent only as QTabletEvents. Before 5.6 (change
01d78ba86a) they were sent as
touch events, and mouse events were synthesized from those. Whereas
on other platforms, every QTabletEvent is followed by a synthesized
QMouseEvent.
This fix proceeds in the direction that event synthesis should be done
in cross-platform code so that platform plugins don't have to repeat it,
following the same pattern as for touch->mouse synthesis. Just as
in that case, the application can disable it, and the platform plugin
can also report that it's unnecessary for Qt to do the synthesis
because the platform already does.
So QTBUG-51618 is fixed, but QTBUG-47007 requires us to remove the
tablet->mouse synthesis from all platform plugins, because the plugin
does not know whether the tablet event was accepted or not, so it does
not have enough information to decide whether to synthesize a mouse
event. Synthesis has been unconditional until now, which contradicts
what the documentation says: the mouse event should be sent only if
the tablet event is NOT accepted. We can now gradually make this
promise come true.
[ChangeLog][QtCore][Tablet support] A synthetic mouse event will
no longer be sent after every QTabletEvent, only after those which are
not accepted (as documented).
Task-number: QTBUG-47007
Task-number: QTBUG-51618
Change-Id: I99404e0c2b39bbca4377be6fd48e0c6b20338466
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There is access to session manager functions which are not present when
building with -no-sm.
Change-Id: I1c92b4a70f7adb56816877930fb9f55b04ff8940
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
That feature is a poor man's session management for applications
that do not implement any specific session management features.
It badly interferes with proper session management support, so
applications must be able to disable it.
This enables fixing applications with
QGuiApplication::quitOnLastWindowClosed() true - the default -
dying too early, before they are enumerated for the list of
applications to restart on session restore, thus preventing them
from being restored. See
https://bugs.kde.org/show_bug.cgi?id=354724
[ChangeLog][QtGui] Qt asking to close windows on session exit as
a fallback session management mechanism has been made optional.
Disabling it fixes session management for applications that
implement full session management. See
QGuiApplication::isFallbackSessionManagementEnabled().
Task-number: QTBUG-49667
Change-Id: Ib22e58c9c64351dea8b7e2a74db91d26dd7ab7aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
It does not work as expected since the QLineEdits do not expand.
Amends b880b7e1ac.
Change-Id: I0b3b3822cca7fc6442a7155eecd46bd3d134d069
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
- Introduce Qt 5 signal-slot connection syntax.
- Merge MainWindow::createMenus()/createActions()
into MainWindow::createMenus(), removing the need
to store the actions as member variables.
Use QMenu::addAction() for brevity.
- For actions in QActionGroups, carry the Valuator enum
in QAction::data so that the slot to handle the selection
does not need to compare the QAction pointer itself.
- Use a non-modal QColorDialog, so that the user
can change colors more easily while drawing.
- Choose saner shortcut keys: control-Q should not
override the default usage for quitting the application,
and using shortcuts for About dialogs is anyway dubious.
- Improve the example documentation.
Change-Id: I57aaf5f5b885c13a953482dbcc41275dd3d6bff4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
From Qt 5.7 -> examples are lisenced under BSD license, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new BSD header instead of LGPL21 one
(in those files which will be under BSD)
Change-Id: I3ad61caaf07802eb9da7d29eca3fe49d8a51b6a8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Insert a group box depending on style hints.
Change-Id: I1b49dc31d5bd32c92d88f95be0683d5223329c11
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Two QObjects had no parent. This caused memory leaks on app close.
Confirmed with the valgrind memory analyzer tool from Qt Creator.
Change-Id: I9294099ca819be1a9c5b74b3cec5bf197be06433
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The implementation of the close event handler requires handling the two
close events that are received on OS X when the user quits through the
application menu bar or the Command+Q shortcut. The first is an
spontaneous event, and the second a non-spontaneous one with the window
already closed.
Change-Id: I24e3d3f0de4d631bd2d5616c85ce747f085691e0
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
- Remove class DragLabel in draggabletext and add a static creation
function instead since it only has a constructor setting some
properties.
- Use QRegularExpression instead of QRegExp
- Use new connection syntax.
- Ensure compilation with
DEFINES += QT_NO_CAST_TO_ASCII QT_NO_CAST_FROM_ASCII
demonstrating use of QLatin1String vs QStringLiteral.
- Streamline code.
Change-Id: I2e2ddeb40837dba379990836c77fb72ad7263e2d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
If QT_NO_LIBRARY isn't set we cannot test QCoreApplication's library
path functions and none of the plugin and library related tests are
applicable. Also, examples that rely on dynamic plugin loading for
their core functionality obviously don't work.
Change-Id: I2d381ee1bc8d944e1181557895a7e92a364fd778
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Set QtProject as organization.
- Remove unneeded member variables.
- Use member initialization in the constructor.
- Use new connection syntax in createActions()
to assemble the menu there, removing the createMenus()
function.
- Introduce a QSharedPointer to ensure settings are deleted.
Previously, the settings were parented on the tree widget,
which is a hack of sorts.
- Fix OS X macros.
Change-Id: Ibbc6bfb03eb5c7eda077b1a3aa3f1707667f7f13
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- Remove unneeded member variables.
- Use new connection syntax in createActions()
to assemble the menu there, removing the createMenus()
function.
- Use a QButtonGroup for the sizes with the style metrics as id.
- Streamline code, rename variables for clarity.
- Introduce static functions returning the list of states/modes and
their names in display order to IconPreviewArea, removing the
duplicates.
- Split actions to open sample icons provided from source directory
or standard pictures location to make sample icons more prominently
visible.
- Check and display @2x images and add tooltips showing device pixel
ratio and actual size.
- HighDPI: Add groupbox displaying screen name and device pixel
ratio, connect to screen changed signal and update icons panel
accordingly. Add check box for toggling Qt::AA_UseHighDpiPixmaps.
- Adjust documentation
Task-number: QTBUG-18680
Task-number: QTBUG-46615
Change-Id: Ice96e9898f168ef2a30e9f46cb260ed57ae015f0
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The system tray example initially was in QtSvg after the Qt 5
modularization split since it depended on it. In the meantime, it
has been moved back to qtbase.
Fixes qdoc warning:
qtbase/src/widgets/util/qsystemtrayicon.cpp:56: warning: Can't link to 'System Tray Icon Example'
Change-Id: Ie3c13baf4ac91ecf0c814885f71ac44dc05b427c
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Moved from qtsvg to qtbase
Task-number: QTBUG-47201
Change-Id: Iab185ea2e270893c0937d1ff87fdb544d226d603
Reviewed-by: Martin Smith <martin.smith@digia.com>
- Remove unneeded member variables.
- Set window sizes depending on screen geometry for High DPI screens.
- Flesh out code for saving the image, setting the supported
mime types on the file dialog.
- Streamline constructor code, remove create...() functions.
- Use new connection syntax in createActions(),
- Obtain the screen from the widget.
- Adapt documentation. Remove note saying that widgets do not need
the parent parameter (since creating parentless widgets can
result in flicker in some cases), explain that QScreen pointers
should be checked.
Change-Id: I0332bbf10eafe861fe3fd5573522694ab5c0183a
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
- Port it to new connection syntax.
- Replace module include by class includes.
Change-Id: I1b8d682bb7bb2e05b6b2b77a9c0d01730ea09cf2
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
- Introduce Qt 5 signals & slot syntax.
- Use mime types in the file dialogs.
- Streamline the code creating the actions.
- Introduce QCommandLineParser.
- Query the available size when determining
the initial size instead of using hard-coded values
for High-DPI screens.
Change-Id: Ifc84a41ed55a4a674b6eafdb6120ac42441405b6
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
qtbase/src/widgets/kernel/qaction.cpp:1257: warning: Can't link to 'QApplication::setAttribute()'
qtbase/src/widgets/kernel/qapplication.cpp:519: warning: Can't link to 'arguments()'
qtbase/src/widgets/kernel/qapplication.cpp:1939: warning: Can't link to 'quit()'
qtbase/src/widgets/kernel/qapplication.cpp:2946: warning: Can't link to 'quit()'
qtbase/src/widgets/kernel/qapplication.cpp:2946: warning: Can't link to 'exit()'
qtbase/src/widgets/kernel/qapplication.cpp:2946: warning: Can't link to 'processEvents()'
qtbase/src/widgets/widgets/qmenu.cpp:1354: warning: Can't link to 'Recent Files Example'
qtbase/examples/widgets/doc/src/tetrix.qdoc:28: warning: Can't link to 'QApplication::quit()'
qtbase/src/testlib/qtestcase.cpp:268: warning: Undocumented parameter 'timeout' in QTRY_VERIFY2_WITH_TIMEOUT()
qtbase/src/corelib/global/qnamespace.qdoc:2427: warning: Can't link to 'QApplication::setLayoutDirection()'
qtbase/src/corelib/global/qnamespace.qdoc:751: warning: Can't link to 'QApplication::setDesktopSettingsAware()'
Change-Id: Ic8170a40fb1cd84e3fb4dd75d9429f4b485f8bd9
Reviewed-by: Martin Smith <martin.smith@digia.com>
Add:
- Save As
- Copy
- Paste from clipboard into new image
Change-Id: Ibbc308e9bbd2ce407119cd9358874f5c22a6bb83
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
- Remove unneeded member variables.
- Use member initialization in the constructor.
- Use new connection syntax in createActions()
to assemble the menu there, removing the createMenus()
function.
- Fix coding style issue (braces)
- Avoid empty label showing up by setting the scroll
area invisible until an image is loaded.
- Set a new image only if image read succeeds.
- Add status bar with information message.
Task-number: QTBUG-46848
Change-Id: I32d5af70d8eb71ec16dd58a0b98c32eb2bd988d7
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Add missing options for QFileDialog, QFontDialog.
Resize and position depending on screen size in order
to look correct on high resolution screens.
Change-Id: I1d9af481270d6a3e49878aaf32b59aea8fa543b4
Reviewed-by: hjk <hjk@theqtcompany.com>
Some platforms, such as QNX, do not implement QT_CLIPBOARD.
Change-Id: I3a8b484b4c00c28a91d3727054672c3788f98381
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The drawing is antialiased and with rounded caps and joins.
Rotation stylus acts like a felt marker.
Airbrush sprays a radial gradient of color, and its alpha can
depend on the tangential pressure if so chosen.
Task-number: QTBUG-46694
Change-Id: I4fb16eb621707e3c56a75aa302dd0d3bf418a745
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The existing recentfiles example was basically a clone of the SDI
example with a "Recent" menu added. Assuming it is better to have
it all in one place, the functionality is merged into the existing
SDI/MDI examples.
- Implement recently opened files handling using a submenu and a
QSettings array in the SDI/MDI examples.
- Remove recentfiles example.
Change-Id: Id5a1ab9fa1c2e6b9ec81309cfe74cf86f450392a
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
- Introduce Qt 5 signals & slot syntax and remove the QSignalMapper
used to map the triggered() signals of the per-MDI-child actions
of the window menu to the activation slot by a functor to demonstrate
the flexibility of the new connection syntax (the functor can
in turn be replaced by a lambda expression once we have C++ 11).
- Merge MainWindow::createMenus()/createQToolBars()
into MainWindow::createActions(), removing the need
to store the actions as member variables.
Use QMenu::addAction() for brevity.
- Use QIcon::fromTheme() to obtain system icons and use
resource icons as fallback.
- Rewrite settings code to use
QWidget::saveGeometry(), Widget::restoreGeometry() since
saving size and position does not work well with multiple
screens. Query the available size when determining
the initial size instead of using hard-coded values
for High-DPI screens.
- Fix minor issues in code, use multi-argument version
of QString::arg(), QDir::toNativeSeparators() to
present file paths to the user and static method invocation.
Change-Id: I3d5078ddbe3cb4eba65e188430ba3580cecb2c79
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Introduce Qt 5 signals & slot syntax.
- Use QIcon::fromTheme() to obtain system icons and use
resource icons as fallback.
- Fix minor issues in code, use multi-argument version
of QString::arg(), QDir::toNativeSeparators() to
present file paths to the user, static method
invocations.
- Use QMimeDatabase for file dialog.
Change-Id: Ib7f947aaaa0c8034f0853b1c740ebf195821dae0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Introduce Qt 5 signals & slot syntax.
- Replace QSignalMapper used for the corner/area
actions by a by a functor.
- Improve command line parsing.
- Reorder class declarations.
- Remove commented-out code.
- Use QDialogButtonBox in dialogs.
- Fix minor issues in code, use multi-argument version
of QString::arg(), QDir::toNativeSeparators() to
present file paths to the user, static method
invocations.
Change-Id: I865c56639c74135b59740797e9a9dfbfca2e72b6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Introduce Qt 5 signals & slot syntax.
- Use QCommandLineParser to obtain file arguments, factor
out positioning into tile() function to be able to
use it from command line and open/new slots.
- Merge MainWindow::createMenus()/createQToolBars()
into MainWindow::createActions(), removing the need
to store the actions as member variables.
Use QMenu::addAction() for brevity.
- Use QIcon::fromTheme() to obtain system icons and use
resource icons as fallback.
- Rewrite settings code to use
QWidget::saveGeometry(), Widget::restoreGeometry() since
saving size and position does not work well with multiple
screens. Query the available size when determining
the initial size instead of using hard-coded values
for High-DPI screens.
- Fix minor issues in code, use multi-argument version
of QString::arg(), QDir::toNativeSeparators() to
present file paths to the user and and static method invocation.
- Fix snippet references accordingly.
Change-Id: I3ea0372bc7ff82247192f54620289352fb68d60f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Introduce Qt 5 signals & slot syntax
- Use QCommandLineParser to obtain file arguments
- Merge MainWindow::createMenus()/createQToolBars()
into MainWindow::createActions(), removing the need
to store the actions as member variables.
Use QMenu::addAction() for brevity.
- Use QIcon::fromTheme() to obtain system icons and use
resource icons as fallback.
- Rewrite settings code to use
QWidget::saveGeometry(), Widget::restoreGeometry() since
saving size and position does not work well with multiple
screens. Query the available size when determining
the initial size instead of using hard-coded values
for High-DPI screens.
- Fix minor issues in code, use multi-argument version
of QString::arg(), QDir::toNativeSeparators() to
present file paths to the user.
- Fix snippet references accordingly.
Change-Id: I1bc49a8913aa6d669e0e666f04be3f1f42eaba10
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
QMap::empty() does not empty the list but is the STL
version to ask if the map is empty. Remove the comment
and code as operator>> of QDataStream will clear the
map.
Fixes Coverity CID#89073
Change-Id: I259e518b44afd42b698368b42aedcc3b84240aca
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The DEPLOYMENT variable has been deprecated.
Change-Id: I1c7c07b36a2e665ae302e4f43f7f2dc752f3c1f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the last path from QSP to hint that we want to
load photos from the global photo library. This
should currently only make a difference on iOS.
Change-Id: I7a6217dbbbc2e247b69bf406c02001458c757211
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
