Move it into QtPublicCMakeHelpers.cmake so it is available also when
configuring qtbase and the Qt6Config.cmake file is not yet loaded.
Pick-to: 6.4
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I88127fe0439ae26af1d125eb584244d315574a48
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Move it out of QtConfig.cmake.in into QtPublicCMakeHelpers.cmake
so that the Qt6Config file is less cluttered.
Pick-to: 6.4
Change-Id: I772a0cca35d5c03cd688c3f1de34984484444105
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
It's needed for creating qmake build tests.
CMake / CTest has a limitation of not allowing to create single-config
tests when using a multi-config generator using the add_test(NAME)
signature.
Using add_test(NAME) forcefully creates per-config tests, which means
that it's not possible to just run ctest to execute tests, without
specifying a -C parameter, which we do in the CI.
qmake tests need to use the add_test(NAME) signature
to specify the WORKING_DIRECTORY option.
Because of the above limitation, a work around is to not use the
add_test(NAME) signature, but instead delegate the working directory
assignment to a generated cmake script, which
_qt_internal_create_command_script can already do.
Pick-to: 6.4
Task-number: QTBUG-96058
Change-Id: I6f439165994671724157f0edb7a71e351271e329
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Previously we called _qt_internal_override_example_install_dir_to_dot
in Qt6CoreConfigExtras.cmake as part of a
find_package(Qt6 COMPONENTS Core) call, and we assumed that the
Extras file would always be included in each example project.
But our package dependencies handling code skips calling
find_package(Qt6Core) if Qt6Core_FOUND is already set to TRUE,
which will definitely happen due to root-scope find_package
calls when configuring other repos.
That means we wouldn't override INSTALL_EXAMPLEDIR to "."
and the install destination would end up being something like
${CMAKE_INSTALL_PREFIX}/example_relative_path/example_relative_path
aka a double nested path.
Make sure we call the
_qt_internal_override_example_install_dir_to_dot function
in Qt6ConfigConfig.cmake in addition to Qt6CoreConfig.cmake.
That way, even if Qt6Core is skipped during dependency resolution,
it's still handled by the Qt6 package itself.
Because the function is defined in the Core package, guard the call
with an if(COMMAND) and only call the function if it wasn't previously
called within the current or ancestor scopes.
Amends ac4a913f33
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-102879
Change-Id: Id47e3ce06faec6d156ae1473942dae0f9b90cb46
Reviewed-by: Christophe Giboudeaux <christophe@krop.fr>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This matches what we do in Dependencies.cmake files, except this time
for COMPONENTS passed to the Qt6 package.
For example if a project does
find_package(Qt6 COMPONENTS Widgets Core)
we'd end up looking for Core twice. Once as a dependency of Widgets
and once as a standalone request of the project.
Make sure to skip the second lookup if it was already found.
Pick-to: 6.4
Task-number: QTBUG-104998
Change-Id: I61db7fbb99818b4b70a0bfe3e167b6f14732292e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Also replace the duplicate call in QtSetup using the
new function.
To do that, we have to actually the call it in QtBuild
after QtPublicDependencyHelpers.cmake is available.
That call is needed so that Qt6_HOST_INFO_foo variables
are available in qt_generate_qmake_and_qtpaths_wrapper_for_target.
Pick-to: 6.4
Task-number: QTBUG-104998
Change-Id: Ic5776c214bee6bedcea714b213b0e5a42c1bae06
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
When a Qt component or dependency is not found, we will now show a
message that the user can reconfigure the project with
-DQT_DEBUG_FIND_PACKAGE=ON.
If the option is enabled, various variables that find_package uses to
find packages (like CMAKE_PREFIX_PATH, CMAKE_FIND_ROOT_PATH) will be
recorded before each find_package / find_dependency call that is
executed in any of the Qt package files.
If any find_package call fails (a package has its _FOUND variable set
to 0), the values of all those recorded variables will be shown.
This is useful to troubleshoot issues, especially when
cross-compiling, without having to manually modify the various
Config files.
Pick-to: 6.4
Task-number: QTBUG-104998
Change-Id: I3654960597911bd704fbe3c419bcae347ab739a9
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Depending on CMake version suggest usage of either
--debug-find-pkg or CMAKE_FIND_DEBUG_MODE to help troubleshoot
why dependent packages are not found.
To achieve that, append the hint message to the _NOT_FOUND_MESSAGE.
To ensure it works for qt dependencies, and not only tool and 3rd
party dependencies, _qt_internal_find_qt_dependencies
is modified to set variable names infixed by the target name, so the
name is consistent with the other dependency lookup functions.
The check and message are also added when a Qt6 component is not
found.
Pick-to: 6.4
Task-number: QTBUG-104998
Change-Id: I4ef23d1c53ac8e04eb72c260d6860c1eeec8d7a3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
If a project calls find_package(Qt6 COMPONENTS Gui Network) and Gui is
not found, there's no reason to look for Network, because the
COMPONENTS option implies that it is a required component. Failing to
find a component sets Qt6_FOUND to false, so we can break early.
If a project calls find_package(Qt6 OPTIONAL_COMPONENTS Gui Network)
then Network will still be looked for if Gui is not found.
Pick-to: 6.4
Task-number: QTBUG-104998
Change-Id: I5c5edd27729635e6b7ade059656b49320364ad13
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Use _qt_internal_find_third_party_dependencies instead.
We rely on the inner find_dependency call to set the
Qt6_NOT_FOUND_MESSAGE message when a dependency is not found.
This implies removing the custom FATAL_ERROR handling
and relying on the parent find_package to display the
Qt6_NOT_FOUND_MESSAGE message.
We also clear Qt6_FIND_COMPONENTS if a dependency is not found.
No need to look for Qt packages if the Qt6 dependency was not met.
This reduces the amount of recursive error messages.
Pick-to: 6.4
Task-number: QTBUG-104998
Change-Id: I5c611aaededfa63eb507ec5385b37a2fb6fcc698
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Except on Windows, the values in CMake environment variables that
contain path lists are separated by colons, not semicolons. See
documentation of CMAKE_PREFIX_PATH.
This is necessary for conan's virtualenv generator which sets these
environment variables with native list separators.
This amends commit e044c94a61.
Pick-to: 6.2 6.3
Task-number: QTBUG-94524
Change-Id: I7f3d140a8462347b181f1d9601fd11cc1ba449db
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Bundle a default LaunchScreen.storyboard file for an iOS app and make
sure it's referenced in the generated Info.plist file.
When launching Qt examples, it ensures the app uses the whole screen
space on the device rather than just a square-ish part of it.
The storyboard file is a copy of the qmake one, which qmake adds
to the Xcode projects it generates.
A custom launch screen can be provided either by setting the
QT_IOS_LAUNCH_SCREEN variable or by setting the
QT_IOS_LAUNCH_SCREEN target property.
The value must be an absolute path to the launch screen file.
The automatic addition of the launch screen entry in the Info.plist
file can be prevented by setting the QT_NO_SET_IOS_LAUNCH_SCREEN
variable to TRUE.
The automatic bundling of the launch screen file in the application
bundle can be prevented by setting the
QT_NO_ADD_IOS_LAUNCH_SCREEN_TO_BUNDLE variable to TRUE.
The current implementation has a limitation that only one launch
screen storyboard and one iOS executable can exist within a project.
If there are multiple executables in the project, all of them will
use the launch screen that is specified last (the last
qt_add_executable call).
Because of this limitation, the API is marked as Technical Preview,
to be improved upon in the future. For now it simply serves as an
improvement to the out-of-the-box experience of iOS apps built
with CMake.
Amends 4d838dae5a
Pick-to: 6.2 6.3
Fixes: QTBUG-95837
Change-Id: I6b067d703d635122959a1ef17fcca713da694a86
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When installing conan packages we have one installation prefix per
package. When cross-building a conan package, we need to make known
those multiple host prefixes to Qt, analogous to
QT_ADDITIONAL_PACKAGES_PREFIX_PATH.
Pick-to: 6.2 6.3
Fixes: QTBUG-94524
Change-Id: I68cbede350f95266a5fd3559e9b9c214c5858eed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use custom script to copy big Android artifacts on Windows platforms.
The script uses 'copy' but not 'copy_if_different' when source file
size is bigger than 2GB. 'cmake -E copy_if_different' only compares
first 2GB of files because of cmake issue, so this step only
workaround the problem.
Pick-to: 6.2 6.3
Task-number: QTBUG-99491
Change-Id: Id076734700e334dfc3330da412462c2b53829b33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use IMPORTED_LOCATION of rcc target when generating Android
deployment settings, instead of the hardcoded host path.
Introduce a helper function to find the location of the imported tool
target.
Change-Id: Icfa51ee7a01b3f58fc4892da03055f9ed531cc0b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of hard-coding a lib/cmake suffix to CMAKE_PREFIX_PATH
use the parent directory of the Qt6HostInfo package which is always
searched for when QT_HOST_PATH is set.
Amends d2359b2d4e
Pick-to: 6.2
Change-Id: I7f3c8fe17bc82f733580d68d928146434a57d849
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This reverts commit 657525965b.
The change relied on reading the last value of the
CMAKE_MINIMUM_REQUIRED_VERSION variable before one of the Qt packages
is found to use it for the version check.
Even if a user project has a cmake_minimum_required() right at
the beginning of the project with a supported version specified,
the first project() call which loads a CMake toolchain file could
contain another cmake_minimum_required() call with a lower
(unsupported) version and that version would be used for the check,
failing the project configuration.
The Android NDK ships such a toolchain file, which requires version
'3.6'.
Thus, relying on the last value of CMAKE_MINIMUM_REQUIRED_VERSION is
not robust enough.
Pick-to: 6.2
Task-number: QTBUG-95018
Task-number: QTBUG-95832
Change-Id: Iff3cb0a46e6e878569dce9c5fe915a714a034904
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qt6Config.cmake calls cmake_minimum_required to ensure a recent enough
CMake version is used in projects.
That call does not set policies in the calling subdirectory scope,
because find_package introduces a new policy scope.
If a project using Qt has a 'cmake_minimum_required(VERSION 3.1)'
call and is configured with a recent CMake, many policies will
still be set to OLD.
One such policy is CMP0071 (Run AUTOMOC on GENERATED files). The
policy value is queried at generation time rather than at target
definition time, which means we can't influence the policy value
(e.g. inside the implementation of qt_add_executable for example)
The inability to influence the policy value for targets created by our
own CMake functions is unfortunate and can lead to issues (in the case
of the above policy to compilation / linker issues).
Record the version of the last cmake_minimum_required call before
the Qt packages are found and error out if the version is lower than
the minimum supported one.
A project can reduce the error into a warning by specifying a
-DQT_FORCE_MIN_CMAKE_VERSION_FOR_USING_QT_IN_CMAKE_MIN_REQUIRED=3.xyz
option when configuring the project.
If the option is used and build issues arise, no official support is
given.
All the CMake example projects shipped with Qt specify a minimum
version of 3.16 already (which is the minimum for shared Qt builds),
so it shouldn't be an issue to require that in other user projects as
well.
Implementation wise, we follow the existing pattern to record
what the minimum and computed versions for static and shared Qt
builds are at qtbase configure time.
These are then checked before the Qt6 or QtFoo packages are
find_package'd.
Amends 6518bcc167
Pick-to: 6.2
Task-number: QTBUG-95018
Task-number: QTBUG-95832
Change-Id: I1a1d06d82f566c92192a699045127943604c8353
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Pass Qt6_FIND_VERSION to components when the
find_package(Qt6 ${ver} COMPONENTS Foo) signature is used.
Create a ConfigVersion file for BuildInternals, so that BuildInternals
passes the version check.
Fix qt_configure_file to look in the _qt_6_config_cmake_dir folder for
the template file rather than Qt6_DIR, because Qt6_DIR might be
accidentally unset after a failed find_package(Qt6) call and the error
is not helpful then.
We already pass versions everywhere else when looking for
dependencies, like in ModuleDependencies.cmake.in,
PluginDependencies.cmake.in, ModuleToolsDependencies.cmake.in.
Pick-to: 6.2
Fixes: QTBUG-91737
Change-Id: Ief1da0c6f239c935385e7ce662951e85ccfdf130
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QT_ADDITIONAL_PACKAGES_PREFIX_PATH variable was introduced to
allow specifying extra locations to find Qt packages.
The reason it was introduced instead of just using CMAKE_PREFIX_PATH
is because the Qt6 component find_package call uses NO_DEFAULT_PATH
which means CMAKE_PREFIX_PATH is ignored.
We use NO_DEFAULT_PATH to ensure we don't accidentally pick up
system / distro Qt packages.
The paths from QT_ADDITIONAL_PACKAGES_PREFIX_PATH are added to the
find_package PATHS option in the Qt6 package, each
ModuleDependencies.cmake file and some other places.
Unfortunately that's not enough to make it work for cross-builds.
Imagine the following scenario.
host qtbase, qtdeclarative installed in /host_qt
target qtbase installed in /target_qtbase
target qtdeclarative installed in /target_qtdeclarative
We want to cross-build qtlottie.
We configure qtlottie as follows
/target_qtbase/bin/qt-configure-module /qtlottie_src -- -DQT_ADDITIONAL_PACKAGES_PREFIX_PATH=/target_qtdeclarative
We expect the target QtQuick package to be found, but it won't be.
The reason is that QT_ADDITIONAL_PACKAGES_PREFIX_PATH is added to the
PATHs option, but we don't adjust CMAKE_FIND_ROOT_PATH.
Without adding the new paths in CMAKE_FIND_ROOT_PATH, CMake will
re-root the passed PATHs under the existing CMAKE_FIND_ROOT_PATH,
which is QT_TOOLCHAIN_RELOCATABLE_INSTALL_PREFIX, which evaluates to
/target_qtbase. There is no QtQuick package there.
To fix this, prepend the values of QT_ADDITIONAL_PACKAGES_PREFIX_PATH
to CMAKE_FIND_ROOT_PATH.
The location where we currently do CMAKE_FIND_ROOT_PATH manipulations
is in the qt.toolchain.cmake file, so to be consistent, we prepend the
new prefixes there as well.
We need to adjust both CMAKE_FIND_ROOT_PATH and CMAKE_PREFIX_PATH,
due the path re-rooting bug in CMake.
See https://gitlab.kitware.com/cmake/cmake/-/issues/21937 as well as
the existing comment in qt.toolchain.cmake marked with
REROOT_PATH_ISSUE_MARKER.
We also need to do a few more things to make the setup work
Because Qt6Config uses NO_DEFAULT_PATH, the CMAKE_PREFIX_PATH
adjustments we do in the toolchain file are not enough, so we still need
to add the same prefixes to the Qt6Config find_package PATHS option.
One would ask why do we need to adjust CMAKE_PREFIX_PATH at all then.
It's for find_package(Qt6Foo) calls to work which don't go through
the Qt6Config umbrella package.
To make the CMake re-rooting behavior happy, we need to ensure the
provided paths are absolute.
So we iterate over the values of QT_ADDITIONAL_PACKAGES_PREFIX_PATH,
to make them absolute. We do the same for the environment variable.
We need to append lib/cmake to the prefixes which are added to
CMAKE_PREFIX_PATH, otherwise the CMake re-rooting bug is hit.
We need to specify the Qt6 package location (${_qt_cmake_dir}) to the
PATHS option in the various Dependencies.cmake.in files, to ensure
that dependency resolution can jump around between the Qt6 dir and
the additional prefixes. Previously the dependency lookup code assumed
that all dependencies would be within the same prefix.
The same is needed for qt and qml plugin dependency lookup.
Amends 7bb91398f2
Amends 60c87c6801
Amends 5bbd700124
Pick-to: 6.2
Fixes: QTBUG-95854
Change-Id: I35ae82330fec427d0d38fc9a0542ffafff52556a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Let find_package(Qt6 COMPONENTS LinguistTools) for a cross-compiled
Qt fall back to search LinguistTools in the host Qt.
Use the same trick as in QtModuleDependencies.cmake: Prepend both
CMAKE_PREFIX_PATH and CMAKE_FIND_ROOT_PATH with the QT_HOST_PATH
(respective ${QT_HOST_PATH}/lib/cmake).
Furthermore adding ${QT_HOST_PATH}/lib/cmake to PATHS argument
makes sure that find_package will work even with NO_DEFAULT_PATH.
Make sure not to match ShaderTools and Tools packages.
ShaderTools is the cross-compiled package, the host package name is
ShaderToolsTools.
Tools is the cross-compiled module from qttools.
Allow an opt out via a QT_NO_FIND_HOST_TOOLS_PATH_MANIPULATION
variable in case that we accidentally match more packages ending in
Tools that are actually cross-compiled packages.
Pick-to: 6.1 6.2
Fixes: QTBUG-95602
Change-Id: Ib0a787716fa529e36f22356da069e705d9eed5fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When Qt5Config.cmake was ported to Qt6, the assignment of
_Qt6_FIND_PARTS_QUIET was accidentally left out.
Make sure that when find_package(Qt6 QUIET COMPONENTS Foo) is
called, the underlying component find_package(Qt6Foo) call gets
a QUIET option as well.
This will silence short-form warnings like
-- Could NOT find Qt6Foo (missing: Qt6Foo_DIR)
It currently won't silence any warnings produced by the transitive
find_package calls in QtModuleDependencies.cmake. That will require a
separate change.
Remove usage of _Qt6_FIND_PARTS_REQUIRED which was always empty.
See details of QTBUG-95573 why it's currently not used.
Pick-to: 6.2
Task-number: QTBUG-95573
Change-Id: I3822c068eecbe84c306a1b04f4187278d35ec3d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Provide better error messages when a Qt package / component is not
found.
Mention the location of the expected Config file on the file system,
whether it exists
Also mention the location of the Config file that was specified by the
user when configuring the project or which CMake computed and stored
in QtModule_DIR cache var.
Mention that a package is not found in case if the main target exposed
by that package is not found.
If the target is not found, mention that it might be due to
QT_NO_CREATE_TARGETS being set to TRUE (when it is set to true).
If it is set to true, the assumption is that the target must have been
defined by something else before the find_package call (either an
earlier find_package call without QT_NO_CREATE_TARGETS set to TRUE or
maybe it's the use case of Qt being built together with its examples
or it's a super build).
Unset _Qt_NOTFOUND_MESSAGE to ensure that the Qt6 not found error
message is not spilled into any subsequent find_package(Qt6) calls,
causing a cascade of unwarranted warnings / errors.
Make sure to unset it only if components were specified, so the
message is not shown or unset in any of the recursive
find_package(Qt6) calls which is a dependency for regular Qt module
packages.
This works fine, because find_package(Qt6) calls with components are
only done in project code and not done by the transitive dependency
code (which looks for Qt6Foo packages directly).
Remove some dead code.
Pick-to: 6.2
Task-number: QTBUG-95532
Change-Id: Ie93d18e25e33aa0fe9e9da9a60e3d3e4cd6adb58
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This change introduces new behavior to error out when configuring user
projects if the CMake version used is too old for Qt to work with.
The main motivator is the requirement of new CMake features to ensure
object libraries are placed in the proper place on the link line in
static builds.
The minimum CMake version is computed based on whether Qt was
configured as shared or static libraries.
At the moment the required versions for building and using Qt are the
same.
The minimum versions are defined in qtbase/.cmake.conf in the
following variables
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_BUILDING_QT_SHARED
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_BUILDING_QT_STATIC
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_USING_QT_SHARED
QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_USING_QT_STATIC
Qt Packagers can disable the version check when configuring Qt
by setting
QT_FORCE_MIN_CMAKE_VERSION_FOR_BUILDING_QT and
QT_FORCE_MIN_CMAKE_VERSION_FOR_USING_QT.
In this case it is the packagers responsibility to ensure such a Qt
works correctly with the specified CMake version.
User projects can also set QT_FORCE_MIN_CMAKE_VERSION_FOR_USING_QT
to disable the version check. Then it's the project's developer
responsibility to ensure such a Qt works correctly.
No official support is provided for these cases.
Implementation notes.
The versions required to build Qt are stored in
QtBuildInternalsExtra.cmake
whereas the versions required to use Qt are stored in a new
QtConfigExtras.cmake.
Also the policy range variables stored in
QtBuildInternalsExtra.cmake are now regular variables instead of cache
variables, to properly allow overrides per-repository.
Some renaming of functions and variables was done for a bit more
clarity and easier grep-ability.
Pick-to: 6.2
Task-number: QTBUG-95018
Change-Id: I4279f2e10b6d3977319237ba21e2f4ed676aa48b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
target_link_options are placed by CMake at the beginning of a linker
line. This gives us an opportunity to use the function to propagate
object libraries. This change adds one more check in the root
Config.cmake file. If CMP0099 policy is enabled, CMake enables
propagating of the linking options when linking two static libraries
using the PRIVATE linking visibility, so we can rely on the correct
linking order and expect object libraries to be propagated.
Note that on the platforms where cmake version is higher than 3.16
Qt uses CMP0099 NEW in functions like qt_add_executable. This means
that at the moment of creating an executable target the TARGET_POLICY
genex will also be NEW, so we do not take into the account the user
defined CMP0099.
If the CMP0099 policy is not available for a certain CMake version
we skip the TARGET_POLICY check and simply disable propagation of
the object libraries using target_link_options for both user and Qt
libraries. This is applicable for the CMake versions 3.16 and less.
Linking approaches have the following priorities(from higher to lower)
after this change:
- target_link_libraries - works if link order matters not or CMake
version greater equal 3.21.
- target_link_options - works if CMP0099 is set to NEW by user or
if the CMake version is greater than or equal to 3.17 and an
executable is created using Qt functions.
- object library finalizer - works if CMake version is greater equal
3.19 or qt6_finalize_target is called explicitly.
- target_sources - is used when all the other approaches could not
be used.
Amends a1fd4f51ad
Amends 3329212815
Pick-to: 6.2
Change-Id: I14f88caeb04e357191c840abeab89b03e210b796
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Ensure that Qt user projects build with sanitizer flags if Qt was
configured with any of the sanitizers enabled.
To compile Qt with sanitizer support enable any of Qt sanitizer
features.
Passing -DECM_ENABLE_SANITIZERS=address to CMake is NOT supported
anymore.
When configuring Qt using CMake directly, pass
-DFEATURE_sanitizer_address=ON
-DFEATURE_sanitizer_undefined=ON
instead of
-DECM_ENABLE_SANITIZERS=address;undefined
When configuring Qt with the configure script pass
-sanitize address -sanitize undefined
as usual.
QtConfig.cmake now records the sanitizer options that should be
enabled for all consuming projects based on the enabled Qt features.
This applies to internal Qt builds as well as well as tests an
examples.
The recorded sanitizer options are assigned to the ECM_ENABLE_SANITIZERS
variable in the directory scope where find_package(Qt6) is called.
The ECMEnableSanitizers module is included to add the necessary flags to
all targets in that directory scope or its children.
This behavior can be opted out by setting the
QT_NO_ADD_SANITIZER_OPTIONS variable in projects that use Qt and might
be handling sanitizer options differently.
Amends 7e03bc39b8
Pick-to: 6.2
Fixes: QTBUG-87989
Task-number: QTBUG-92083
Change-Id: I2e3371147277bdf8f55a39abaa34478dea4853a6
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Dependency lookup mechanism is the same for modules and plugins. It
makes sense to wrap it using macro.
Pick-to: 6.2
Change-Id: I73727743b0f5f40b2d94624f65ebfcf85e8dcc59
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove target specific flags from static_link_order.
Move the check to the common config.tests folder.
Amends 5fb99e3860
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: I1368075ec6bd1e743b2b89fd93143df38a278ec2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For user projects we run the static link order check once
'find_package(Qt6 ...)' is called.
If linker can resolve circular dependencies between static libraries
and object files we set the _qt_link_order_matters property of the
Qt::Platform target. This indicates the use of finalizers is not
required and we may rely on CMake-base propagation of resource
libraries and resource object files.
If linker could not resolve circular dependencies depending on
the _qt_resource_objects_finalizer_mode value:
- Finalizer will be called and collected resource objects will be
linked to the target directly.
- Finalizer will be omitted and resource objects will be linked
using the target_sources function implicitly. This only
propagates resource one level up if consumer links the static
library PUBLICly, but all symbols will be resolved correctly
since object files are placed in the beginning of the linker line.
In the CMake version 3.21 we expect that CMake will take care about
the order of the resource object files in a linker line, it's
expected that all object files are located at the beginning of the
linker line.
TODO: Need to confirm that the CMake 3.21 meets the expectations.
Amends 4e901a2f99
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: Ia68976df8182d3d3007b90c475c1e3928a305339
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake 3.21 introduced a new IMPORTED_TARGETS directory property which
we can use to promote all imported targets within a scope to be
global.
This would cover transitive non-Qt imported targets which the Qt build
system does not know about and is thus a more complete solution
compared to promoting only Qt targets.
Run a finalizer at the end of the directory scope where
find_package(Qt6) is called to promote all imported targets within
that scope to global (when requested).
The old promotion method is disabled when the CMake version is new
enough.
Pick-to: 6.2
Task-number: QTBUG-92878
Task-number: QTBUG-94528
Change-Id: I533a3bd4186eba652f878ddd72c76118c2fd8bae
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This makes qt_internal_disable_find_package_global_promotion available,
which is needed when linking against QtMultimedia in a static build
Pick-to: 6.2
Change-Id: I9b8f6d7b74a8693ac471f8a280e893f4da80a44b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This proposal collects all the resource objects to the qt-specific
property of the static libraries. This is done to avoid littering
of other static libraries and put resource object files to the
source part of the linker line when linking the end-point
executable.
The way we link object resource libraries is changed back to the
target_link_libraries approach as we may omit using finalizers
with linkers other than ld. Users may enforce finalizers by calling
the qt6_enable_resource_objects_finalizer_mode function if need.
Refactor tests related to the static resources.
Amends ddaa7150d8
Task-number: QTBUG-93002
Change-Id: I74135e291cd82fb54d1b284b4b4a1e002b1fef98
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed for the upcoming static plugin mechanism, where we have to
extract the list of Qt module dependencies of a target and then extract
the plugins associated with those modules.
To do that we need to recursively collect the dependencies of a given
target.
Rename the moved functions to contain the __qt_internal prefix.
Also rename the existing QtPublicTargetsHelpers.cmake into
QtPlatformTargetHelpers.cmake to avoid confusion with the newly
introduced QtPublicTargetHelpers.cmake.
Task-number: QTBUG-92933
Change-Id: I48b5b6a8718a3424f59ca60f11fc9e97a809765d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Extract common static plugin handling functionality into a separate
QtPublicPluginHelpers.cmake file which is loaded by the Qt6 package.
Split the code into smaller functions that will be re-used by each
templated QtPlugins.cmake.in file, rather than copy pasting the same
code into each QtFooPlugins.cmake file.
As a drive-by, handle QtFeatures.cmake and QtFeaturesCommon.cmake
as public helper files just like QtPublicPluginHelpers.cmake.
This makes it clearer that the functions are available outside
the internal Qt build and also provides a way for not dumping new
helper functions into Qt6CoreMacros.cmake.
Task-number: QTBUG-92933
Change-Id: Id816ef009b4fac1cd317d3ef23f21b3530028067
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add an iOS specific plist file like we do for macOS.
If the user hasn't specified a bundle identifier or a development
team id, do what qmake does and query the Xcode preferences file to
pre-populate those if possible.
This allows running
cmake -GXcode ./foo
on a Qt example project and building it with xcodebuild on the
command line without having to go through the IDE to set a development
team id or modifying the example project to add a product
bundle identifier.
Note that the change assumes that the development team id has been
previously set / configured via Xcode. If no such id is found, then
the value will not be set and the user will still have to specify it
either in the project file or via the Xcode UI after the project
has been generated.
Amends 3a2fa3fec5
Pick-to: 6.1
Change-Id: Iaab4e57de72c9877fb9035d28f9a879b2c91a33c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Allow to set QT_ADDITIONAL_PACKAGES_PREFIX_PATH as both an env
variable and CMake cache variable. Also normalize path and list
separators, so that they can be used similar to CMAKE_PREFIX_PATH.
The environment variable is intended to be set by the conan virtualenv
generator, so that e.g.
find_package(Qt6 COMPONENTS NetworkAuth REQUIRED)
also works if NetworkAuth is not installed into the Qt prefix.
Pick-to: 6.1
Fixes: QTBUG-91142
Change-Id: Ia9f9b9fa2b1b051d33073629139640d0f4c7a843
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
'QT_HOST_PATH' indicates that we use crosscompilation toolchain
to build project. In this case 'Qt6Config.cmake' loads
'Qt6HostInfoConfig.cmake' from host QT_HOST_PATH, that defines
correct paths to host tools.
Replace hardcoded paths for host tools by paths recorded
in Qt6HostInfoConfig.cmake.
Correct conditions for QT_HOST_PATH, evaluate it explicitly as
string, but not as boolean expression.
Fixes: QTBUG-86557
Pick-to: 6.0
Change-Id: Ib52bbd32478051d019a932dcb1f735e2d4aacfbf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When a CMake release introduces a new policy that affects most Qt
modules, it may be appropriate to make each module aware of that newer
CMake version and use the NEW policy without raising the minimum CMake
version requirement. To reduce the churn associated with making that
change across all Qt modules individually, this change allows it to be
updated in a central place (qtbase), but in a way that allows a Qt
module to override it in its own .cmake.conf file if required (e.g. to
address the issues identified by policy warnings at a later time). The
policies are modified at the start of the call to
qt_build_repo_begin().
For commands defined by the qtbase module, qtbase needs to be in
control of the policy settings at the point where those commands are
defined. The above mechanism should not affect the policy settings for
these commands, so the various *Config.cmake.in files must not specify
policy ranges in a way that a Qt module's .cmake.conf file could
influence.
Starting with CMake 3.12, policies can be specified as a version range
with the cmake_minimum_required() and cmake_policy() commands. All
policies introduced in CMake versions up to the upper limit of that
range will be set to NEW. The actual version of CMake being used only
has to be at least the lower limit of the specified version range.
This change uses cmake_minimum_required() rather than cmake_policy()
due to the latter not halting further processing upon failure.
See the following:
https://gitlab.kitware.com/cmake/cmake/-/issues/21557
Task-number: QTBUG-88700
Pick-to: 6.0
Change-Id: I0a1f2611dd629f847a18186394f500d7f52753bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit 9968a211f9.
The PKG_CONFIG_* environment variables should be added by the user
environment, preferably by the toolchain file.
Apparently, the change was added for Android before we turned off
pkg-config for Android. It is not needed anymore.
Change-Id: Ieeed09ae53a606c85d4937f463286b5b0f76bde9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
At the moment our examples require a minimum of 3.14 due to changes
in upstream CMake's Autogen functionatlity to support Qt 6. Anything
lower would simply not work with Qt 6.
It's not clear yet if we actually want to require 3.14, or something
higher. At the very least there were many significant changes to
support iOS in CMake 3.15.
But for now just bump the version checked by Qt6Config.cmake to be
consistent with what's in our examples.
Task-number: QTBUG-88086
Change-Id: I119c2ad05a18c357fe7c659b30685af87475fc84
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
By default, when using the Qt6 CMake package to look for components,
the find_package() calls for the components use NO_DEFAULT_PATH to
ensure that CMake doesn't accidentally find system (distro) packages.
Instead we limit the paths to one level up from where the Qt6 package
is.
Unfortunately that doesn't quite work for finding Qt packages that
might have been installed into a different prefix than where the main
Qt prefix is.
This happens when Qt addons are built by Conan, and installed into
a separate prefix.
To allow calls like find_package(Qt6 COMPONENTS ConanAddon) to work
in a scenario as described above, introduce a new variable called
QT_ADDITIONAL_PACKAGES_PREFIX_PATH which can be used to specify
additional paths where Qt CMake packages should be found.
This is similar to previously introduced QT_EXAMPLES_CMAKE_PREFIX_PATH
variable which was meant for a similar case, but only for examples.
Additionally, allow disabling the NO_DEFAULT_PATH option by setting
the QT_DISABLE_NO_DEFAULT_PATH_IN_QT_PACKAGES cache variable to TRUE.
This would allow regular usage of CMAKE_PREFIX_PATH to work, at the
risk that system Qt CMake packages might be found.
Augments 5cd4001bf2
and ffe0889413.
Fixes: QTBUG-86882
Change-Id: Ia8e060cbba6d2a10c3d63d81892f2c71e4236a9a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
...and fix the build errors the original change caused.
This reverts commit 127fb8bb55.
Change-Id: I4006b32734a51c5d101dd73c957f81d2a0f84ba1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit 58c1c6ee5c.
This lead to configuration errors on some machines, blocking
development.
Change-Id: I744f6cc95fbaa273519ab8fc8fb492b87f5729b8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The find_dependency() macro calls return() on failure, meaning any code
after it will be ignored, thus checking any XXX_FOUND variables after
find_dependency() is pointless.
Fix the places where we use find_dependency() and set the "failed" state
before the call and the "success" state afterwards.
Change-Id: Ia5239c704f02a9bec972210374ffed7808b14055
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We can't rely on the MACOS define as that's set by our private
QtPlatformSupport.cmake that's not shipped.
Change-Id: I86c578a282a0833408a06d923954510a3579bdaa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When cross-compiling with CMake, before this patch pkgconfig calls would
find libraries which are part of the host system and not the target
system.
The current approach used is based of the discussion present in
https://gitlab.kitware.com/cmake/cmake/-/merge_requests/4478, and should
be considered a temporary solution until the issue is properly addressed
in upstream CMake.
Change-Id: I535d4d48c2a5d34689082b80501b3b6ae30d7845
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
