We have no idea what it might contain, but test it anyway to make sure
it works. Turns out there were a few bugs the unit tests have now
caught.
Change-Id: I0a6c868365feec31c2360b3c341c8ca6944f4352
Reviewed-by: David Faure (KDE) <faure@kde.org>
Registered names and IP addresses can only contain unreserved
characters (letters, digits, dots, hyphens, underscores) and the
colon, which is a gen-delim. For registered names and IPv4 addresses,
we can simply use the default config -- if anything that remains
percent-encoded, it means it's not a valid hostname anyway.
For IPv6, we just need to decode the colon.
Change-Id: If8083d47f6e5375f760e7a6c59631c89e4da8378
Reviewed-by: David Faure (KDE) <faure@kde.org>
It's not necessary to check at every point if we know the minimum file
size: it must contain at least the header, one segment (__TEXT) and one
section (qtmetadata). Most files have more than one segment and more
than one loader command, so this check does not mean we can eliminate
the checks further down.
Also be more resilient against corruptions in the header data: check not
only the additions, but the values themselves. For example, an offset +
size addition could be smaller than the file size when the addition
overflows in 32-bit. Another thing is that the cmdsize fields could be
corrupt too.
Change-Id: I7968a769c1cbe9150270c91823cafc4f8f833876
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We already had an ELF decoder, which helped us greatly to find the
metadata and that catches most Unix systems (Solaris, QNX, HP-UXi, and
all of the free Unixes). On other Unix systems, aside from Mac OS X,
we simply scanned the entire file for the signature. On Windows, even
without a COFF-PE decoder, we use a LoadLibrary trick to load the
plugin without loading the dependent libraries. In most cases, that
works.
Unfortunately, on Mac OS X we didn't have a decoder and nor could we
do the file scan: because Mac OS X binaries could be fat binaries, we
wouldn't know which architecture's signature we had found.
No more. This adds a full Mach-O decoder to QtCore. It is also capable
of finding the boundaries of the architecture's binary, but that
functionality is disabled since all Qt 5 plugins have plugin metadata
sections.
Change-Id: I2d5c04c5ecf024864b8a43f31ab6b7e6c5eae9ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The one in tst_QLocalSocket::writeToClientAndDisconnect just needed
proper ordering: that's what waitForDisconnect is for. At the same time,
we need to make sure we get the same message from all three
implementations of QLocalSocket::waitForDisconnect (and without the
useless space at the end).
Change-Id: I21364263cf908df022df814a6a39fcb5783e84e6
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The rule for a new override is that it must still work if the old
implementation is called. The catch is that any class that derives from
QProcess and isn't recompiled will still have QIODevice::open in its
virtual table. That is equivalent to overriding open() and calling
QIODevice::open() (like the tests).
In Qt 5.0, QProcess::start() called QIODevice::open directly, not the
virtual open(), so there's no expectation that a user-overridden open()
be called. With that in mind, simply fix QProcess::start to not call the
virtual open at all.
Similarly with QLocalSocket, the calls to open were always non-virtual.
Task-number: QTBUG-32284
Change-Id: I88925f0ba08bc23c849658b54582744997e69a4c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This should have been done in the commit that introduced open
(953255abab), but was missing.
Change-Id: I1c2de4ad5fa42aa5b90646e7d4d7d1b1570a0f87
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Currently, calling
QGraphicsScene::items(QPointF(0, 0), Qt::IntersectsItemBoundingRect) or
QGraphicsScene::items(QPointF(0, 0), Qt::ContainsItemBoundingRect)
will exclude items whose shape does not contain QPointF(0, 0). This is
because QGraphicsSceneIndexPointIntersector::intersect() also checks if
the point is contained within the shape, instead of just checking
if it is contained within the bounding rect.
Task-number: QTBUG-19036
Change-Id: Ie701af2a5694d40cf9b3c9c19adbb09a53a4e398
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Do not attempt to lookup the service owner on peer connections (it will
fail).
Make QDBusAbstractInterface::isValid() return a sensible result on peer
connections, instead of always returning false.
Task-number: QTBUG-32374
Change-Id: I1b02feaffb3b255188f8d63306f89f5034a32f22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unexport free function qt_registerAliasToFontFamily() and
Make it a static member of QPlatformFontDatabase instead.
Change-Id: I1df49a8e37a24b3961f92288d67b6f1108a7d520
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Copy some needed files into a local folder when QtWidgets is not
available.
Task-number: QTBUG-31993
Change-Id: I93b65bda198c22a60e979c119de8de683a78bb53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
- Don't run this test in parallel
- Remove redundant QT=-gui
- Place the insignificant_test marks together
Change-Id: I078fa29a4dccef9af8798792d06d51835b4b8934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This is a bit like QDir::cleanPath(), but for URL paths.
The code is shared with QDir::cleanPath(), by extracting the common parts
it into a helper, qt_normalizePathSegments().
Change-Id: I7133c5e4aa2bf17fba98af13eb5371afba64197a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce QScopedPointer for windows or instantiate them on the
stack to prevent leaks. Tile all windows within virtual
screen to ensure they don't influence each other and are not
in the taskbar area.
Move cursor away from windows in modalWindow-test.
Change-Id: I40343e9f72263e22bdf2560448d7efcc915d17cb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
It was doing tricks with URLs that it shouldn't be doing... including
running QDir::toNativeSeparators on a URL.
Task-number: QTBUG-32311
Change-Id: I5b6f640919956998c00dcf507f931045f21a9e53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It seems like the left-side menu bar on Ubuntu 12.04 causes some
problems when it is not automatically hidden, which is the case
in the CI machines.
Task-number: QTBUG-31995
Change-Id: I01ff3fe4c09d720b2dd53037c42e59679d8570dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The deadlock is caused because the QEvent is destroyed while holding the
event list mutex. And the QEvent may have a custom destructor that will
re-enter the event handlng code.
The QScopedPointer that should destroy the event must be created after
the MutexUnlocker.
Regression introduced by commit f9035587b9
Task-number: QTBUG-31606
Change-Id: I6b2cbc2656eacdec61b641886953f00bf5b3ff36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is better to mark a test as XFAIL so we get an error whenever
it gets fixed.
Task-number: QTBUG-23059
Change-Id: I0f2f491645c261bf0e735dde6a16d8e90e0b17a0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Sometimes it is nice that hiding a widget does not affect the
layout. This patch makes that possible by allowing hidden
widgets to take up space.
Change-Id: Ifbc1cdee0e112950acc025919b98199ea9558db7
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Makes for more informative debug output when the tests fail.
Change-Id: Ib07dd79452a56413c711394dd72aa37dbb4a70d7
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows to find the parent directory url using
url.adjusted(QUrl::RemoveFilename).
Change-Id: I1ca433ac67e4f93080de54a9b7ab2e538509ed04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise the output is too intertwined.
Change-Id: I6729727b3afcdcbec58e3fa560587dd1fa08f38e
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qt_ACE_do(".co.uk") was returning an empty string because of the
leading dot. Allow leading dots from topLevelDomain, but not from
other calls.
Change-Id: I757d9960708e205d30554cd2bbcf618c8624792b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling waitForNotified on an uninitialized notifier will print a
warning and return false. The autotest has been adjusted.
Change-Id: I85e18d6d0a8a5462e1a5d451613add941d89b5fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instantiate widgets on the stack to ensure they are destroyed
when the QApplication instance goes out of scope.
Introduce waitForWindowExposed() to make sure events are in sync.
Task-number: QTBUG-32125
Change-Id: Ia54e2fa9a7c2e279353c4514a6735e326edf35ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Need to store 17 decimal digits for binary64, IEEE 754 double formats.
Autotest is included. Test cases from TC39 test suite for ECMAScript.
Task-number: QTBUG-31926
Change-Id: I546398f21ea7ff5e40e89fc9de8703f628f55df9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Do not lower case file names to generate hash keys since
QString::toLower() converts some characters with context
which the Windows file system will not.
Task-number: QTBUG-31341
Change-Id: I285bfedef3c1ca9d59083229e61974dd378c72ae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Since configure no longer puts this in $QTDIR/lib, we need to
copy it from the NDK and into the device ourselves.
Task-number: QTBUG-32079
Change-Id: I75ee5f8a00de9a1ba536bcfd857e6b2e7a0e1f6e
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
If we don't call finish() before crashing the activity, then
the Activity Manager will just restart it.
Task-number: QTBUG-32079
Change-Id: I09623afe545c3f4e8b9be801ccfbe244059b270e
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We need to also load the binary for the application itself.
Task-number: QTBUG-32079
Change-Id: Ic26d5e6d950d6d18aaa54392c3c84b6deaa56c75
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We just pass 1.0 as the scaled density for now, since it shouldn't
make much different to the code being tested.
Task-number: QTBUG-32079
Change-Id: I888c4640e4627f47a2c128d2ce2a41adf4ca3132
Reviewed-by: BogDan Vatra <bogdan@kde.org>
contrary to what one may expect, it's actually *not* supposed to remove
the meta-characters it interprets.
luckily, this function is not used much any more ...
Task-number: QTBUG-31877
Change-Id: I2b60f9b173140da78db2b07b596cc2e5f6e6d555
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Qt CI system runs the unit tests after installation, but
with the qmake in the build directory. This means that the
installed content is not unit tested. Add an additional cmake
unit test to test the files in the install location.
The new test is marked insignificant for now until the true
effect on the CI system is known.
Task-number: QTBUG-27315
Change-Id: If9f12e88cfc741946cfabc25dbf789a11a2af4b8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of calling different wait functions on different platforms,
we use QTRY_COMPARE to check the process state.
Change-Id: I6489cabce9e63f9c8b1036f3cccbf35b52df72e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
This reverts commit e3fa266623b08e837cb4ccc7fe59da243d03dd27
That commit applied a change at the wrong place in the code.
Change-Id: I21e3045a3af14ad2f90c5fe338815c35a2d27ae6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Leading and double dots are bad, but trailing dots are fine. The ASCII
part of a hostname is supposed to be LDH (letters, digits, hyphen) only,
but we accept '_' (underscore) as an exception too.
Change-Id: I79957ddec4da78a0e2357fe50c8687db03e1c99e
Reviewed-by: David Faure (KDE) <faure@kde.org>
qt_ACE_do(".co.uk") was returning an empty string because of the
leading dot. This has always caused issues in KDE code too, where ACE
normalization needs the dot removed, and re-added afterwards.
Change-Id: Id9fcea0333cf55c14d755a86d4bf33a50f194429
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Unactivating a window is not really supported, nor has it ever really
been, so activate another window instead. This incidentally
also makes the test work cross platform.
Change-Id: I6e593e9b7972dd5c5038c8d18a42be90bf19248c
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
The test currently leaks 2 directories QFileDialogTestDir,
QFileDialogTestDir4SelectFiles in /tmp.
Change-Id: I396f0b069572a680d81206dd0f1ddf606cbbe9e4
Reviewed-by: David Faure (KDE) <faure@kde.org>
Number literals are always interpreted as double. This lead to errors
on platforms that define qreal as float.
Change-Id: I838f690c33bb97e39a2cca2cfd3bdfb9482bc2b2
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Removed the QCursor entry from the list of types
if QT_NO_CURSOR is set.
Change-Id: I6b8e925acedec75ed6e46b2e3fe34d0011667c91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Flip !Q_OS_IOS conditions to Q_OS_MACX where it seems appropriate,
remove a redundant condition in qtextcodec_p.h.
Change-Id: I21c8c0c490f1eb4a9337a7f2f3e907c125489438
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Only run this test case when the widgets module is present, skip it
otherwise.
Change-Id: I84f48b670b967af3bf0701ceba5a192f33989034
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Setting the buttons in the constructor is a use-case that happens
more often than setting the orientation. Yet, there was a
(Qt::Orientation,QWidget*) constructor, but no
(StandardButtons,QWidget*) one.
This patch adds it.
Change-Id: If6a5c9f7450a388cd77bd93c8dd144b2fdc11847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Unit test by Friedemann Kleint <Friedemann.Kleint@digia.com>
Task-number: QTBUG-31569
Change-Id: I526d33d4f88a41f6ac349098476bc45af6c841b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The issue is already fixed in 5.0 but let's be nice and ensure the issue
won't be reintroduced later.
Task-number: QTBUG-30931
Change-Id: Ia6944acaf6e7217f8d0f1fa75d0e9977db11d892
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Because fonts are bigger on BlackBerry than those assumed when the test was
written, explicitly adjust the font size on this platform.
Change-Id: I6a23c28c2d32edf744dd5de09ea0a97fd5f9b6d6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Some test cases rely on the fact that show() is not fullscreen, which may not
be true for some platforms. Explicitly make use of showNormal() to avoid
full-screen show on these platforms.
Change-Id: Ie62fe21bf0f466c561a27cffda99d0201b4a45af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Some tests assume that QWindow::show() behaves like
QWindow::showNormal(), which is not true for platforms in which the show is
fullscreen, forcing QWindow::showNormal() to be explicitly called.
Change-Id: Ib5f23a4d01bc6a3a2973f57488996c8c198c45f3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QDateTime.toString() is writing out milliseconds since change
15da0a5af2. Unfortunately this breaks
QDateTime::fromString() with Qt::TextDate which can't handle the new
format.
Fix by making QDateTime::fromString split up seconds and milliseconds
on a period, if any. Now
QDateTime dt = ...;
assert(QDateTime::fromString(dt.toString(), Qt::TextDate) == dt)
works again.
Change-Id: Ibfe9032e357ceaf894e33f3e33affe94f56dbf5c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
During a call to QDir::mkpath(), the same path could be created
by another process, in which case the OS mkdir will fail with EEXIST.
But the docs for mkpath() state that it's not an error if it
already exists, whereas for mkdir() it is an error. So
QFileSystemEngine::createDirectory should accept the EEXIST error
silently if it occurs while creating the sequence of parent directories
and the final leaf directory, but should fail if EEXIST happens when
it was called from QDir::mkdir(), which is when the createParents
parameter is false. We assume the operating system mkdir() and
CreateDirectory() are atomic, so there should be no race condition
in QDir::mkdir(). It's not necessary for mkpath() to call stat()
at each level, only to check whether an existing entry is a directory
or a file. Also added to the autotest to verify that if the
path is an existing file, creating a dir with the same name will
fail in either mkdir or mkpath.
Task-number: QTBUG-30046
Change-Id: I926352f10654fdf3b322c8685bb85ad8b8844874
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is a mismatch how QML and C++ converts QJsonValue. This patch
unifies conversions by adding QJsonValue support in QVariant::convert().
Change-Id: I8a1db3d77c517945ef48064b4b66ba03aa4f2fd0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Initialize undockedGeometry to roughly the current position.
Task-number: QTBUG-31044
Change-Id: I03cbe280d1215bb58ab721b60e29b45359cde76d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
this works with -no-gui, and doesn't interfere with our upcoming ANGLE
hackery.
Change-Id: I2985cc0acd1fbf185b8967ffe58606b1b7dd9d1e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
BlackBerry OS does not allow for explicitly controlling the locale through the
"LANG" environment variable. Locale is controlled by the underlying PPS
Service instead.
Change-Id: I22154e39f81a9467ad7fdb90a042396390398b1b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
In Qt 5, we declared that throwing from event handlers is undefined
behavior. So stop testing this.
We will try our best to capture and pass along std::bad_alloc, but even
that might not work, depending on compiler settings. In particular,
after the upgrade to MinGW/GCC 4.8 with DW2, this test stopped working.
Task-number: QTBUG-31615
Change-Id: Ibf5fb2ce0c48b983549096bf7aac434b6ed3ac2e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
qt_nameprep is tested by tst_qurlinternal. We just need to be sure that
QUrl handles them correctly.
Change-Id: Ic563004870d2cf2fa7a31ce49fff7280d5ffb5f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
warning C4804: '<=' : unsafe use of type 'bool' in operation
Remove outer loop and replace ugly ROW_NAME macro by
inline function.
Change-Id: Id7e4ef047adaf8017b8c21621d19c151993cc6dd
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Edge case: a > that should have been >=. Without it, we never ran the
rest of the IDN nameprepping.
Change-Id: I2276d660de3a70d0c561bb18816820d9a0f47e77
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
RFC 3454 says about prohibited characters (section 2, "Preparation
Overview"):
3) Prohibit -- Check for any characters that are not allowed in the
output. If any are found, return an error. This is described in
section 5.
In other words, we mustn't simply strip the output of prohibited
characters. We must generate an error if they are present. We do that by
clearing the data.
We already had tests for prohibited output, but they were
indistinguishable from being stripped. So instead add some extra
characters so that we can tell whether the label was cleared.
Change-Id: I2d95217c27be5e2d54deed0036cb009e3b7f4886
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Because tests are usually run as root on some setups, it does not
make sense to test for the right permissions of a readonly file.
Change-Id: I484f88722d3a9ce7123edc0fb57acae528fa194e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update the test code to match the current Qt idiom for finding test data (and
fix it on QNX).
Change-Id: I63e7c97b717722e4e6859a12f329d56b26584ce6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This only marks tst_qopengl as insignificant on Windows 7 32bit
with the Angle configuration.
Task-number: QTBUG-31611
Change-Id: I1876b6fdc32fef93edf34c2bd61d03cc9ba11135
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
In QML it is common to connect signals to slots that are implemented as
JavaScript functions. QML used to maintain separate data structures that
mirrored the QObject connection list and kept references to the JavaScript
objects necessary to perform the call on signal activation.
The recent addition of functor based QObject::connect makes it possible
to store this information in QSlotObjectBase sub-class instead, which
eliminates any extra bookkeeping.
This patch adds internal connect and disconnect overloads to QObjectPrivate
that allow for connecting QObject *sender, int signalIndex to a given
QSlotObjectBase and similar for disconnect.
Change-Id: I90f43d13eb95bd884d752484cf4faacc446f4d6a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On Mac it's expected that some elements are
filtered out of the a11y hierarchy.
We do this with the shouldBeIgnored function.
The problem is that we would ignore some objects
and then return them in the child attribute function.
This is inconsistent and leads to voice over not working.
For example having a plain QWidget with other widgets as
children would cut off all of these widgets, since the
plain QWidget would be ignored.
Change-Id: I5f6c26b272e5ca57d59c1ed1ef47e9a2b1181295
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Add font combo to top level via layout and position top level
instead of the (child) font combo.
Change-Id: I0f754c37c009d1ed83615b800d6f2467e858c047
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The TXT record is particular because each RR can contain multiple text
strings. So we need to join each RR's texts too.
To make it easy, I've made everything be QStrings.
Change-Id: Ia0506544b913585e7be860c81077cff8e0dab547
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The DNS protocol changes the order of the RRs in each reply it sends,
in an effort to balance the load in servers. For most tests, to ensure
that we get always the same result, we simply sort it back.
For MX and SRV, we can't sort because we also need to test that
QDnsLookup sorted correctly according to priority. So instead allow
that test to have multiple alternatives.
Change-Id: I5c119f907b31789de5c9cf2471cc82ecd140d06f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Section 4.2.2.4 of ISO 8601 allows for decimal fraction representations
of dates and times. Currently, when calling
QDateTime::toString(Qt::TextDate) or QDateTime::toString(Qt::ISODate),
the milliseconds will be omitted. However,
QDateTime::fromString(str, Qt::TextDate) and
QDateTime::fromString(str, Qt::ISODate) already support decimal
fraction representations, so this patch just adds this support to
QTime::toString, and hence QDateTime::toString().
Task-number: QTBUG-30250
Change-Id: If58e4b3d3105322c51d11a76b832e5e634d8991f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds a way to enable operator<, operator== and operator<<
into QDebug for QVariants with custom types.
Change-Id: I3d12d891bd7252ad2b8f1de69bced354800a1f29
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The test now passes on Ubuntu, Lucid, too.
Task-number: QTBUG-20778
Change-Id: Id7ddc4b34d03f8fb9af977c0f40615d544934f13
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Convenience function that returns user data for the current item,
analogous to currentText().
This avoids to having to write the cumbersome
QVariant variant = comboBox->itemData(comboBox->currentIndex());
(It's quite common to put strings as text and the corresponding
enum values as user data.)
Change-Id: I8c7632c647c5583d18e4e22703aeb4447d73162d
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If no stretch factors were specified, we used the preferred size as a
stretch factor. Obviously, that didn't work if the preferred size was
actually 0.
This patch works around this by actually setting the stretch factor to
1.0 if this is the case.
This should work fine in most cases, except for the case where there
are also other items with a preferred size close to 0.
In this case, the item with preferred size 0 will just grow
faster than an item with e.g. preferred size 0.1.
Task-number: QTBUG-31217
Change-Id: I966455da0bdd00308591c7f7cfbc4e134d423e57
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The winapi call used to load the icon does not
support the arguments on windows ce
Change-Id: Ia600eb9b05d5eb40778d8c281e6ce8278bfd7177
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
"QTest" is the C++ namespace; "QtTest" is the library name
- Edited the logger output in qplaintestlogger.cpp
- Updated documentation
- Updated expected outputs for self-tests
Change-Id: I43c525c43221a8d4e843a00d6d55b0f06ef55fd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Latin1 strings are usually stored as 8 bit data in the json binary
format. But that data structure has a size limitation of 16bit, so
we need to fall back to storing the string as 16 bit data if it is
too long.
Task-number: QTBUG-30946
Change-Id: I0069b1367030b0b2f819fd1f04e34c9e2534a2a3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Return the codec if one was found by QTextCodec::codecForUtfText,
instead of returning the default (UTF-8).
Task-number: QTBUG-31293
Change-Id: I95e3260376c00537006b7fbfdc3df5850e1ba657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Required to prevent qmlscene flicker on startup.
Also brings back that qWait() in tst_QGL::graphicsViewClipping()
that seems necessary after all.
Amended-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Change-Id: I14ba6e18ac98e5df1ce8ecbc263b30176b67d111
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The optimisation done in cbaf52b099 for Qt
5.0 got the order wrong of the comparison. The queue must be sorted in
decreasing priority order. But since higher numbers mean higher
priority, that means the queue must be sorted in decreasing priority
number order.
Task-number: QTBUG-29163
Change-Id: Iaf3424b9bb445bf5c71518927f37253cead454f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
In JSON, any number is stored in double. We need to make sure we
keep the maximum possible number precision for integer number. In
IEEE 754 double format, the significand precision is 53 bits(52
explicityly stored).
Autotest is included. qint64 and double work fine.
Task-number: QTBUG-28467
Change-Id: I7f857671c50e4334e9329c778f9b4f090f490540
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
when the type is a pointer to a registerable 1 argument template type.
Task-number: QTBUG-31002
Change-Id: Iac0d6b71b2b805a1876110a0781d02188083c4e5
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When encountering code such as:
X<a<b>
moc does not have the mean to know if 'a' is a type or a variable, so the
type parser currently assume that '<' always open a template parameter.
(instead of being the operator<)
The type parser do not care about the actual type, it just need to strip
the string out. The problem is that then the whole rest of the file will
be considered as the type.
With this patch, we also stop the parsing at semicolon. The type will
be wrong, but this allow the parser to recover and it will continue to
look for more classes after this.
(In other words, moc will no longer break if it encounter such construct
in a header. But it will still not parse such types correctly if used
within a Q_OBJECT class)
Task-number: QTBUG-31218
Change-Id: I1fef6bc58493d7c00df72401c9ad55463b24eaa7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Although it is possible to construct those containers, they are not
usable, as qHash(float) and qHash(double) are ambiguous.
Also don't use CustomMovable as a container key.
It is not equality or lessthan comparable.
Change-Id: I8c7ee068250e2e2b3427769153e3017721c13c50
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
With scrollbars enabled we would get two resize events when tiling the windows.
First one with the expected viewport size, and then a second one with a bigger
viewport when the QMdiArea calculated that the space it set off for scrollbars
was not needed after all. Depending on whether or not the geometry propagation
of the platform plugin was synchronous or not, we would get one or both of the
events before evaluating the viewport size against the expected size, resulting
in flakeyness, and an expected fail on OS X.
We now explicitly disable the scrollbars during the test, and restore them for
the latter test that verifies that scrollbars show up when the area is resized
below the minimum size of the combined child widgets. This allows us to unskip
the expected failure on OS X, and should make the test less flakey.
Change-Id: Ief767456cfd79f5cd0bb0e220c40e5995674ff71
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
XPASS : tst_QWidget::update() QCOMPARE(w.numPaintEvents, 1) returned TRUE unexpectedly.
Loc: [tst_qwidget.cpp(4017)]
Change-Id: Ib7664871ed218f4c88fd2430491fa65443651927
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
There has been frequent failures with CI, especially with OSX 10.7.
These seems to work ok in CI node when ran alone but CI is running
those in parallel with some other tests, and this is causing errors,
most likely due to lost focus.
Change-Id: Ic4151099c27a4b5d91778c9b13e88d2d661e8a0d
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Session tickets can be cached on the client side for hours (e.g.
graph.facebook.com: ~ 24 hours, api.twitter.com: 4 hours), because the
server does not need to maintain state.
We need public API for it so an application can cache the session (e.g.
to disk) and resume a session already with the 1st handshake, saving
one network round trip.
Task-number: QTBUG-20668
Change-Id: I10255932dcd528ee1231538cb72b52b97f9f4a3c
Reviewed-by: Richard J. Moore <rich@kde.org>
Numpad is unnecessarily long.
Change-Id: I19a6ce129e26a4f6f8344f514317214c48abde6e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
QVariantMap would work too; I presume this is why the annotation is needed,
rather than QtDBus automatically figuring out which type to use.
This even checks that QHash<QString,QVariant> works in the annotation,
although QVariantHash would be simpler to write, obviously.
Change-Id: I7a339ca90f10e5ec97dcea1bb4dbba3c515e6b23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
in order to test for regressions in qdbusxml2cpp too.
Change-Id: Icd2a6f319c5fabf0b0f2a1fe8c70afcd2c84263e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
The test showed frequent failures with XCB in
initialShow2() (line 3200) after
01bc34088e (QTBUG-30923) which
can be fixed by ensuring the widget from the HFW-test is deleted.
Use QScopedPointer to ensure widgets are always deleted in case
of test failures, too.
Task-number: QTBUG-20778
Task-number: QTBUG-30923
Change-Id: I2af7737b604820463f760d6b6787dd5a5a93d602
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Fix connection to pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
The current code only use the QMetaObject of the type coming from the
function type to look up the signal id. But if the signal was casted
to a pointer to member function of a derived type, then we also need to
look in the base classes
Change-Id: Ib98fc38f63942946acb34d9f83c100991d58e4e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, I managed to break the guarantee that a deserialised local
datetime is the same time of day (potentially different UTC time),
regardless of which timezone it was serialised in. This happened after
I fixed QTBUG-4057 with If650e7960dca7b6ab44b8233410a6369c41df73a,
which serialised datetimes as UTC.
This patch reverts QDateTime serialisation to pre-Qt 5 behaviour to
restore the guarantee and consequently re-opens QTBUG-4057.
Change-Id: Iea877f7ed886f530b928067789b53534e89fe8cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If tabFocusFirst is not cleared or set to another valid item,
there will be crash later if the removed item is deleted after
removal.
Task-number: QTBUG-30923
Change-Id: Iba9a6ce9334c52f8e552b0accda95ebb5fcfcdb1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
