Extend the support of pointing at the right test from batch from WASM
to all supported platforms.
Change-Id: I9b6342ed0954f0fdc2f08c76f6b3f24f44f0388a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is useful in some cases where extra parameters have to be set on
the test target.
Change-Id: Ic727fdaf0bc9c2e1c684d1a86352d31c0f974477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The batch test target name is a useful thing to obtain in various
target-generating scripts.
Change-Id: I9605cf860fe1485e48108eba7e93f9064209d8fb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The key only applies to macOS bundles. Also, qmake doesn't have it.
Pick-to: 6.4
Task-number: QTBUG-95838
Change-Id: I438f0079cc7b74672dfbe956769138a8bb006669
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Having the build directory encoded in installed files impedes
reproducible builds.
QMAKE_PRL_BUILD_DIR is exclusively used by qmake if 'depend_prl' or
'fast_depend_prl' is active. This is useful for tracking the
interdependencies of libraries within a project but not for Qt's installed
libraries. Even the qmake-based Qt build never used this feature.
Fixes: QTBUG-97386
Change-Id: Icd0801edc1ad92a99fff3a1e92b5f660914813b2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
An approach of test batching (joining multiple tests into a single
binary) has been taken, due to long linking times/binary size on certain
platforms, including WASM. This change adds a new feature
'batch_test_support' in Qt testlib. Based on the value of the feature,
test batching may become enabled with the -batch-tests switch.
Batching works for every target added via qt_internal_add_test. When
first such target is being processed, a new combined target for all of
the future test sources is created under the name of 'test_batch'.
CMake attempts to merge the parameters of each of the tests, and some
basic checks are run for parameter differences that are impossible to
reconcile.
On the C++ level, convenience macros instantiating the tests are
redefined when batch_tests is on. The new, changed behavior triggered
by the changes in the macros registers the tests in a central test
registry, where they are available for execution based solely on their
test name. The test name is interoperable with the names CMake is aware
of, so CTest is able to run the tests one by one in the combined binary.
Task-number: QTBUG-105273
Change-Id: I2b6071d58be16979bd967eab2d405249f5a4e658
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Add source files to the _qt_internal_target_sources property, when
running qt_internal_extend_target on interface libraries instead of
ignoring sources for CMake versions that don't support non-interface
properties. The property is not full-functional, but still allows to
execute internal routines on target sources.
Also add qt_internal_get_target_sources_property function that helps
to destinguish which property stores target sources.
Task-number: QTBUG-103196
Change-Id: I435c558090a24a7988f1a1c49f924dc195e72480
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And also teach CMake to treat it properly instead of hardcoding the
version number.
[ChangeLog][Build System] The configure script now accepts a new
parameter -disable-deprecated-up-to which is used to remove all
deprecated code from API and ABI while building the libraries.
The version number must be specified in a hex format.
For example, it can be used like this:
/path/to/qt/configure -disable-deprecated-up-to 0x060500
to remove all code deprecated in Qt 6.5.0 or earlier releases.
Task-number: QTBUG-101510
Change-Id: I557cf83e29b867fa1052bb097985e144b5eaf34d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DEPRECATED_WARNINGS_SINCE macro is
renamed to QT_WARN_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the
new name is not defined.
Fixes: QTBUG-104944
Change-Id: I320c033010dfab120db6922598454f95169657f7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's needed for creating qmake build tests.
CMake / CTest has a limitation of not allowing to create single-config
tests when using a multi-config generator using the add_test(NAME)
signature.
Using add_test(NAME) forcefully creates per-config tests, which means
that it's not possible to just run ctest to execute tests, without
specifying a -C parameter, which we do in the CI.
qmake tests need to use the add_test(NAME) signature
to specify the WORKING_DIRECTORY option.
Because of the above limitation, a work around is to not use the
add_test(NAME) signature, but instead delegate the working directory
assignment to a generated cmake script, which
_qt_internal_create_command_script can already do.
Pick-to: 6.4
Task-number: QTBUG-96058
Change-Id: I6f439165994671724157f0edb7a71e351271e329
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Emscripten's option for enabling asyncify (-sASYNCIFY) is a link-time
option, which means there is no requirement to have a separate asyncify
build, at least for static builds.
Replace the current QT_HAVE_EMSCRIPTEN_ASYNCIFY compile-time option
with a run-time option which checks if the asyncify API is available.
Keep support for configuring with "-device-option QT_EMSCRIPTEN_ASYNCIFY=1"
for backwards compatibility and for the use case where want asyncify
support to be on by default for a given Qt build.
Enable asyncify for the asyncify_exec example.
Pick-to: 6.4
Change-Id: I301fd7e2d3c0367532c886f4e34b23e1093646ad
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The wasm helpers file is not included in QtBuild and is thus not visible
when standalone tests or other repos are being built. This fixes it.
Amends 1f9c1f032c
Pick-to: 6.4
Fixes: QTBUG-105615
Change-Id: I6c9229e1f259fa5043d7d11b8ee0293e26077f3e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This ensures that tests can be executed on the simulator or device, by
doing the necessary steps like setting a bundle identifier, Info.plist
file, launch screen, etc.
This is done by calling _qt_internal_finalize_executable in the
implementation of all internal test adding functions.
The finalizers are limited only to iOS for now, as an incremental
step, and to ensure we don't accidentally break tests on other
platforms.
At least WebAssembly uses its own finalizers which would likely cause
duplicate calls if the _qt_internal_finalize_executable was
unconditional.
Pick-to: 6.4
Fixes: QTBUG-104754
Change-Id: I729d56385dd206b22c975fc2ce4e2c683e6e4e2c
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Variables starting with 'arg_' usually are the result of the
cmake_parse_arguments call. It's better to not use them for the regular
variables for readability.
Change-Id: I4054c63d3e48b2a27d8a632cd8908a59302afa47
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
HEADER_MODULE argument is passed to qt_generate_module_pri_file from
the qt_internal_add_module function, but the property means that the
module is an interface library. So it makes sense to replace this
argument with the reading of the target TYPE.
Change-Id: I1d8cd2ff732f526975cde6bdd4783fee44c8bd98
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Developers can add to Emscripten's EXPORT_RUNTIME_METHODS
by defining their own using:
QT_WASM_EXTRA_EXPORTED_METHODS
Which will add on to Qt's default exported runtime methods
of UTF16ToString,stringToUTF16
for cmake:
set_target_properties(<target> PROPERTIES QT_WASM_EXTRA_EXPORTED_METHODS "ccall,cwrap")
or
set(QT_WASM_EXTRA_EXPORTED_METHODS "ccall,cwrap")
for qmake:
QT_WASM_EXTRA_EXPORTED_METHODS = ccall,cwrap
Done-with: Mikolaj Boc
Fixes: QTBUG-104882
Pick-to: 6.4
Change-Id: I9678bdb7b077aaa8527057212ea4e161c0be0b60
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When loading a Qt CMake project in an IDE like Visual Studio, many
Qt-internal targets are visible, right next to the user's targets. This
is inconvenient and confusing.
Use CMake's FOLDER concept, and put Qt-internal targets into a dedicated
FOLDER.
For that we introduce the new global property QT_TARGETS_FOLDER that,
analoguous to AUTOGEN_TARGETS_FOLDER, is the folder name for Qt-internal
targets. By default, it's not set, nor is folder support enabled.
Change qt_standard_project_setup() to
- enable folder support
- initialize QT_TARGETS_FOLDER if unset
- initialize AUTOGEN_TARGETS_FOLDER to the same value if unset
Set the FOLDER property of qtbase's internal targets for user projects
to the value of QT_TARGETS_FOLDER.
Task-number: QTBUG-99808
Change-Id: I880ac7731f88faa83a384dcdec98b1b88ac6cc2e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The current qt_internal_extend_target interface expects that the caller
will pass the HEADER_MODULE argument on each call. This is not correct,
since the argument doesn't affect the target internals, but only help to
decide how to modify the target according to its type. The target type
meanwhile can be always read from target properties. So this solution is
more consistent.
Change-Id: Ie84a2226ceb71cb5272670e5d43bdfc7a101360a
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The qlalr outputs need to be added to the consuming target.
Change-Id: I9600729103298cf7e0a712d5f3dc49c5f4c729f5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...if the double-conversion CMake package cannot be loaded.
The find_path call must specify the header exactly as it is included.
The select_library_configurations call always failed, because the
command expects the presence of DOUBLE_CONVERSIONS_LIBRARY_DEBUG,
DOUBLE_CONVERSIONS_LIBRARY_RELEASE, or both.
Upstream double-conversion's MSVC build system does not specify a naming
scheme for the debug build, and there are no debug/release binaries to
download that suggest a naming scheme. Therefore we assume the usual
'd' suffix for the debug library like we do everywhere else.
Lastly, we need to set DOUBLE_CONVERSION_INCLUDE_DIRS.
Fixes: QTBUG-105501
Pick-to: 6.2 6.3 6.4
Change-Id: I71ff5238f353541b8bf5ac6792b86134deba20d1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the support of pre-cooked content for the LD version script. The
content can be generated without using the perl script at configure
or build time.
Change-Id: I1316e114a1d5550b2fdcf3482a51f336fb311a29
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add headersclean_check that allows to run all module-specific
'_headersclean_check' targets in single command. Also add
dependency on input header files for the headers clean custom
commands.
Also adjust the '_headersclean_check' target names to match
the naming of module targets - the 'Qt' prefix is removed.
Change-Id: I17c3442c3c51ce99cd9b38c85d606e9ababbb013
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously configuration would not error out if you configured Qt
with -DCMAKE_CONFIGURATION_TYPES=RelWithDebInfo;Debug -GNinja
instead you would get an error like
CMake Error at cmake/QtBaseConfigureTests.cmake:51 (message):
Failed to find compiled architecture detection executable at
qtbase/build/config.tests/arch/RelWithDebInfo/architecture_test.exe
Note that Qt code tries to find the arch test in a RelWithDebInfo
directory but due to using single-config Ninja,
CMAKE_CONFIGURATION_TYPES is ignored, and the executable is placed
in a non-config specific folder.
Error out early in such a case, and mention that for multi-config
builds, the Ninja Multi-Config generator should be used.
Pick-to: 6.4
Change-Id: I0192185123be563671cbe154f968a03b7458e327
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
All supported CMake versions provide this file, and we did not modify
it.
Pick-to: 6.4
Change-Id: I4b21a99159ba8315491dc64ab737b7e5a28a6966
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Matches qt_generate_module_pri_file and allows using genexes in the
content of the file.
Change-Id: I5ee7a973d3e27a721e31315d3ebe2c88ffa1db42
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The same way qt_generate_module_pri_file does it.
Change-Id: I42047ce7d23e8a289535041ccace8b0f0140ea12
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allows adding additional properties to the target after the initial
call to qt_internal_add_plugin.
Change-Id: I7998c906e53699ec41b44b51aabbe480ae698b21
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_copy_framework_headers now can accept all the headers in one call.
This is useful for upcoming changes when it will accept generator
expressions as the input instead of actual files.
Change-Id: I110b6d9e6de976b2a7581902e051e38571716c5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We forwarded the compiler path to the EP but not the flags that might
have been set via the CXX environment variable.
Make sure to also forward the flags.
Pick-to: 6.2 6.3 6.4
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I0fbf9b595f7885014b1f09d158db52e56a3d5243
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
When building qtsvg examples as external projects on Windows
with Ninja Multi-Config in a prefix build on the CI, the build would
fail with an error message like:
ninja: error:
'C:/Users/qt/work/qt/qtsvg/lib/Qt6SvgWidgets.lib', needed by
'RelWithDebInfo/svgviewer.exe', missing and no known rule to make it
This can be reproduced locally on Windows if one calls
'ninja svgviewer' instead of just 'ninja'. I wasn't able to reproduce
it on macOS, although I have seen some peculiarities in the
dependencies there as well.
External project examples depend on the ${repo_name}_src custom
target to ensure all Qt modules are built, so one would expect that
dependency to be sufficient.
While trying to figure out what's going wrong, I noticed that running
'ninja -t query qtsvg_src:Debug' showed dependencies on Release
libraries, which should not happen. The :Release target looked fine
though.
I'm still not quite sure why the Release libraries are not built
on the first ninja run, despite the example having a proper dependency
on qtsvg:Release.
Running 'ninja svgviewer' a few more times ends up succeeding at one
point, because the SvgWidgets Release library does get built in
parallel with the failing example, and the next rebuild would
succeed.
While trying to fix the :Debug target to have proper dependencies, I
noticed that we add dependencies to the ${repo_name}_src custom target
via the DEPENDS option of add_custom_target(). That is incorrect,
that option should only be used for file level dependencies.
For target dependencies, add_dependencies should be used.
Doing that fixed both the :Debug dependencies as well as the Windows
issue, which is good enough for me.
Amends 08f46bb400
Pick-to: 6.2 6.3 6.4
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: I1888681e2e9362d3237acbdacc83222d6a60b48e
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The simulator build of Qt for iOS is currently x86_64 only, instead
of universal builds with an arm64 slice as well, since we don't
support xcframeworks. This means we can't rely on Xcode's default
simulator arch settings, which on an Apple Silicon Mac will be
arm64.
Instead we override the simulator arch, like we do for qmake.
Pick-to: 6.4 6.3 6.2
Change-Id: I8b52389db1b83f4f9679c724bcde53b44dbc76f1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When using qt-cmake-standalone-test, we didn't tell CMake to use the
same C++ language standard that Qt used when it was configured.
We did tell CMake to do that when configuring tests with
qt-internal-configure-tests via the qt_build_tests macro.
To ensure the proper standard is set, we also need to
find_package(Qt6Core), because the std flag is derived from the
QT_FEATURE_cxxyz flag which is set by Core.
Change-Id: Ia41f2a24983ddab0107a6446743f7b054df8c033
Pick-to: 6.2 6.3 6.4
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Previously if qtbase was built with feature A set to ON, then building
qtsvg, then rebuilding qtbase with feature A set to OFF, trying to
build qtsvg would fail with an error message at configure time saying
that the feature value has changed.
This check was added quite early in the Qt CMake port, presumably to
catch accidental reconfigures that might cause long rebuilds.
This has dubious benefit though. We constantly had people telling us
they get the error without knowing what to do. The usual advice was to
remove CMakeCache.txt and reconfigure.
Instead of forcing people to suffer this dance, relax the constraint
by issuing a warning instead of an error, and make it more clear why
a rebuild might happen (a changed feature value might change
the generated module C++ header file which in turn might be included
by various project sources).
Amends 20633d97ab
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-95834
Change-Id: I992bd61024958869f3b995471b4c7ff75e3a33a0
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
All references to these variables have been removed from Qt
repositories.
Change-Id: Icca4668ec183ff543d04097600f8a8869066f8cc
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Add an option to limit the number of tests for building and testing
Android multi-ABI configurations in CI. Currently only Core tests
supposed to run.
Change-Id: Ibb8a41d60d108259ef2675ec54bde2482f87c8b2
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Warn projects not to use it because PUBLIC_LIBRARIES don't make
sense for executable targets and it also led to some issues in the
internal functions where some of them did not expect to receive
PUBLIC_LIBRARIES.
To ensure builds don't needlessly break, treat PUBLIC_LIBRARIES values
as regular LIBRARIES. In the future we might add an error instead.
Using PUBLIC_LIBRARIES in qt_internal_add_app, etc, accidentally
worked because the option name and the values following it were
parsed as values of the "previous" option, like SOURCES or
INCLUDE_DIRECTORIES or LIBRARIES, and when those got
passed through to qt_internal_extend_target, things magically worked.
We have a lot of projects using PUBLIC_LIBRARIES, mostly due to the
way qmake pro files were written and how pro2cmake converted them.
We'll have to clean up each repo.
Change-Id: I69e09d34afdf98f0d47c08d324643fc986f8131c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Needed to get rid of warnings like
CMake Warning at cmake/QtFindPackageHelpers.cmake:406
(message): Could not find target Qt6::BundledLibYaml to query
its package name. Defaulting to package name Qt6BundledLibYaml.
Consider re-arranging the project structure to ensure
the target exists by this point.
which were introduced with the integration
of dffcc2370e in qtbase.
This happened because we never set and exported the package names
for 3rd party bundled libs.
So export the package name as well as "is 3rd party lib" value.
Amends 6235f7fa62
Pick-to: 6.4
Task-number: QTBUG-104998
Change-Id: I25fc1ffef766198974025e0097bced1cca4dd28d
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
