close stdin and let the process finish right away instead of first
waiting for a reaction (which is not supposed to come) and then
finishing.
Change-Id: Ifcf200eead5ed95217843e105f9d2dbb5398d646
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
§24.4.1 [iterator.traits] of N3337 makes it *mandatory* to define the
various types
std::iterator_traits<Iterator>::{value,pointer,...}
for any given iterator.
§24.4.1.2 makes it enough to define them within our iterator class.
Change-Id: I1305c8392d224889b09395e30ecc77b194020a15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 5b9006bbdb.
Also revert "Doc: Enable documentation for QScopedPointer's rvalue ref functions"
This reverts commit 5f8416ec65.
Adding a move contructor to QScopedPointer makes no sense, because moving
means 'escaping the scope', which breaks the fundamental point of
QScopedPointer.
Change-Id: I4ac1b108bf199af6e436fa1629aa2d3b93c27724
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To ease interruption of long running tasks, a new method
QThread::setInterruptionRequested() can be called.
The task can check QThread::isInterruptionRequested()
and act upon it by stopping itself.
These methods are designed to replace the use of a global variable
and other hacky ways to stop a task running in another thread.
Change-Id: I17622dd60d2262078210e7e4294ad6c53a6dc179
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a new method to return the time zone abbreviation for the current
time spec. For LocalTime this is the abbreviation returned by mktime.
This new method will later be used in changes to the date formatter
and QTimeZone.
Note this change does not implement WinCE support.
[ChangeLog][QtCore][QDateTime] Add method timeZoneAbbreviation() to
return effective time zone abbreviation.
Change-Id: I265a5e96c72eb7236974f80f053f1fb341e3c816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QTEST_NOOP_MAIN was removed in Qt 5, but was still in the source of the
QProcessEnvironment auto test.
Change-Id: I0048c330c9d4e99c46192cc05ffd3b77d404fb6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
(dacf9961da)
In order to see 2 active threads, we must check activeThreadCount() before
the runnable finishes.
Change-Id: I1a48b41e0c1fd81a65d915b9bd1e741ff267ed2b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This extends the QLinkedList auto test. This is copy paste
with small edits from the QList auto test.
Change-Id: I5bce7ee304998d1c7258f11b2f31a7fb87706936
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The QCommandLineParser class provides a means for handling the command line options.
QCoreApplication provides the command-line arguments as a simple list of strings.
QCommandLineParser provides the ability to define a set of options, parse the
command-line arguments, and store which options have actually been used, as
well as option values.
Done-with: Laszlo Papp <lpapp@kde.org>
Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was inserted into the shared data (i.e all instances)
Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures correct detach when insert with an iterator is
called on a shared instance (i.e same behavior as QVector)
Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before calls to erase on a shared instance would in release mode
imply that items were removed from the shared data (i.e all instances).
In debug mode it would assert.
This patch improves the behavior to detach and erase items
specified by the iterator(s) (i.e same behavior as QVector)
Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUrl("http%3A%2F%2Fexample.com") has only a path of
"http%3A%2F%2Fexample.com". In Qt 5.0 and 5.1, the %3A would get decoded
to ':', which in turn makes the URL invalid (colon before first slash).
Found via discussion on the interest mailing list.
Change-Id: I7f4f242b330df280e635eb97cce123e742aa1b10
Reviewed-by: David Faure <david.faure@kdab.com>
This fixes the wrong value for path() and fileName() when a
path or file name actually contains a '%'.
userInfo() and authority() are not individual getters, they combine
two or more fields, so full decoding isn't possible (e.g. username
containing a ':').
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
defaults to decoded mode in the getters and setters for userName,
password, host, topLevelDomain, path and fileName. This means a '%'
in one of those fields is now returned (or set) as '%' rather than "%25".
In the unlikely case where the former behavior was expected, pass PrettyDecoded
to the getter and TolerantMode to the setter.
Change-Id: Iaeecbde9c269882e79f08b29ff8c661157c41743
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The unit tests were caching the original TZ value to restore later
after testing with different TZ values. The problem is reading TZ will
return a null value if no override TZ value is set, and if you then set
the TZ to null the system assumes UTC and not the system time zone.
Instead we need to unset TZ if it was null to start with.
Change-Id: Ib0625b1712e565f9fdfa99e2ffe1e5d74f059354
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
Invoking waitForStarted() on a QProcess before or after an unsuccessful
call to start() (e.g., with an empty command), would execute FD_SET with
an invalid file descriptor and cause the process to abort.
The bug can be reliably reproduced on OSX.
Task-number: QTBUG-32958
Change-Id: Id25b7781168489281645e21571361ca1a71d43e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follows a similar include-pattern as the qguieventdispatcher test.
Change-Id: Ie8669a5bc155abd6687e81526f2b95d0d19b009e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
A QCoreApplication may run a different event dispatcher, such as the
QEventDispatcherBlackberry, and QGuiApplications will have the GUI
dispatcher provided by the QPA plugin, such as QCocoaEventDispatcher.
Neither support X11ExcludeTimers.
Change-Id: Id5ea1c7dd74a127e13fa4d2eaa9a1bd2715a9dbb
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is a flaky test on Windows 8 64-bit, so marking it as
XFAIL if it is expected to fail.
Task-number: QTBUG-30943
Change-Id: Idd276f80b54fcd5cf295a7e1adebcf0020eaa8ca
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
QStandardPaths::enableTestMode has a verb in the imperative ("enable")
as the core word in the name. That indicates an action. The function
should not have had a parameter.
Instead, add a Qt-style setXXXEnabled function.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths::enableTestMode is
deprecated and is replaced by QStandardPaths::setTestModeEnabled.
Change-Id: Ib26ad72d7c635890d2cb22ae9d44cbda08a6f17c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Mark some tests as expected failures on OS X 10.8
- tst_QSettings::ctor(native)
- tst_QSettings::ctor(ini)
- tst_QSettings::ctor(custom1)
- tst_QSettings::ctor(custom2)
- tst_QSettings::rainersSyncBugOnMac(native)
Task-number: QTBUG-32655
Change-Id: I54928d991a8ccf300b40747feaa6fda9d124781b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
As Qt still thinks that all UNIX filesystems are case sensitive, which
is not the case for eg Mac, where they might be both, as well as for
mounts of other filesystems.
Change-Id: I07b8550685bfa17ac407c20ac991dc54df040942
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This prevents deadlocks in case the destructor re-enters.
(Example: a functor containing a QSharedPointer of a QObject)
This also fixes a leaked slot object in disconnectHelper.
Change-Id: Ia939790e3b54e64067b99540974306b4808a77f2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: Icd6a09402c3cf14286f4ba1f8f4c99ac483ec1a3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Added the compiler options, we need the info of sdk.
Task-number: QTBUG-32715
Change-Id: I70612f36a16e0ab5025194a10ce399822e159c7c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By not assuming that the file system is case insensitive. OSX supports
both.
Change-Id: I11a4ac4cdff97b97b183dd319757a42ae14bb52d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Make qabstractproxymodel and qidentityproxymodel build and run
even if -no-widgets is used since they don't depend on Qt Widgets.
Change-Id: I48bc2f6a78812b1bf0083f76c6a4e106f4e38650
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For some time, we've assumed that the URL specification had a mistake in
that it didn't allow the "#" character to appear decoded in the
fragment. We've gotten away with it so far.
However, turns out that the CoreFoundation NSURL class doesn't like it.
So we have to be stricter.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %23 found in the fragment to "#" in the output of
toString(QUrl::FullyEncoded) or toEncoded()
Task-number: QTBUG-31945
Change-Id: If5e0fb37bae84710986c9ca89bd69ec98437cd63
Reviewed-by: David Faure (KDE) <faure@kde.org>
It's a good practice to always replace bad UTF-8 sequences with the
replacement character. It could be considered a security issue too.
Change-Id: I9e7d72e4c4102cdb8334449b5e7f882228a9048f
Reviewed-by: David Faure (KDE) <faure@kde.org>
