Being a test, I'm going to abuse operator-> on end() to check
that we get what we want (a pointer past the end).
Change-Id: I7ab8d017b0fe320018820eff336d496328ade481
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The signal is emitted from QGuiApplication these days.
Pick-to: 6.2
Change-Id: I7423cd4808e8df86960f225fd6e4a12a1a4f11f3
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QAbstractScrollAreaPrivate::layoutChildren() positions the viewport, but
did not take the overshoot from scrolling with a scroller into account.
If the scroll area was resized during a scroll, then this resulted in the
roll back overcompensating for the overshoot, placing the viewport outside
the visible area.
Fix this by taking the overshoot into account when positioning the
viewport.
Add a test case. We have to use QWindow-based mouse event simulation, as
the QWidget based move events use QCursor::setPos, which doesn't reliably
go through the gesture framework.
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Zhang Hao <zhanghao@uniontech.com>
Fixes: QTBUG-94769
Pick-to: 5.15 6.2
Change-Id: Idf650c91e5a9cffa996e23e743939243b1d4fcc0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This define used to be set for the entirety of the Qt build but
was lost during the qmake->CMake transition. Re-enable it.
Change-Id: Idc4cb6ada485158559485b60f62f76439550b255
Pick-to: 6.2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This was handled correctly when the backend supplies transitions
bracketing the time in question, but the fallback code tried to use
the DST offset at the time with larger offset from UTC; this did not
work when the gap was due to a change in standard time. Discovered by
ANS1 parsing of a date-time with two-digit year, for which the
date-time parser tried to use 1921-05-01T00:00 local time when filling
in the fields it had parsed; but, when run in Europe/Helsinki, there
is no such time due to the 20m 11s skipped when joining EET from the
prior local solar mean time.
Correct the calculation to use the actual change in offset from UTC,
as used in the (far better tested) between-transitions branch of the
code, rather than the DST offset after the transition.
Add a test-case based on the ASN.1 certificate date whose parsing
revealed the issue. Although it seems nothing in Coin can reproduce
the issue, the reporter has verified that the test does indeed fail on
the system where the bug was found and the fix does fix it.
Fixes: QTBUG-96861
Pick-to: 6.2
Change-Id: I12b02bad01daca2073d1a356452cd573684aa688
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When parsing CSS, a border-color value is parsed as four brushes, as css
allows assigning up to four values, one for each side.
When applying the CSS to the HTML, we accessed it as a color value,
which overwrote the parsed value with a QColor. So while we had a valid
parsed value (and didn't re-parse), the code accessing that value still
expected it to be a list, and thus failed to retrieve the data.
There are several ways to fix that, but the cleanest way without
introducing any performance penalty from repeatedly parsing (and in fact
removing a parse of the string into a color) is to enable colorValue to
interpret an already parsed value that is a list without overwriting the
parsed value again. To avoid similar issues in the future, add assert
that the parsed value has the right type in brushValues.
As a drive-by, speed things up further by making use of qMetaTypeId
being constexpr, which allows for it to be used in a switch statement.
Add a test case.
Fixes: QTBUG-96603
Pick-to: 6.2 5.15
Change-Id: Icdbff874daedc91bff497cd0cd1d99e4c713217c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because of the addition of the operator T*(), the expression "it + N"
where N was not exactly qsizetype but any other integer type was a
compilation failure because of ambiguous overload resolution.
With GCC it's apparently a warning:
warning: ISO C++ says that these are ambiguous, even though the worst conversion for the first is better than the worst conversion for the second:
note: candidate 1: ‘QList<T>::iterator QList<T>::iterator::operator+(qsizetype) const [with T = char; qsizetype = long long int]’
note: candidate 2: ‘operator+(char*, ptrdiff_t {aka long int})’ (built-in)
With Clang, it's an error:
error: use of overloaded operator '+' is ambiguous (with operand types 'QList<int>::const_iterator' and 'ptrdiff_t' (aka 'long'))
note: candidate function
inline const_iterator operator+(qsizetype j) const { return const_iterator(i+j); }
note: built-in candidate operator+(const int *, long)
Pick-to: 6.2
Fixes: QTBUG-96128
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a06f23dd56b060
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The test passes, the functionality is implemented in QCocoaWindow.
Task-number: QTBUG-8857
Pick-to: 6.2
Change-Id: I2f4b3a39cec1aaaf4351753b590f35e280503461
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- when there is no intersection between the current selection and the
spans collection, get ranges for all cells, just as if no span exists
- when there is an intersection between the current selection and the
spans collection, get separate ranges for each cell (as before)
This fixes the regular case of selecting multiple non-spanned cells
after some cells are merged (get a single range for all cells instead of
separate range for each cell). However, when selecting together a group
of spanned and non-spanned cells, you still get a separate range for
each cell. But this is normal behavior in similar applications; for
example in LibreOffice, you cannot select and merge spanned and
non-spanned cells: an error dialog tells you that it's not allowed.
Done-with: Christos Kokkinidis
Pick-to: 6.2
Fixes: QTBUG-255
Change-Id: Ic38f9a064a1f499825e7f750668013fc2dc564ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add operators as hidden friends, add test case to make sure that
basic value-type operations are possible with this type.
Task-number: QTBUG-255
Change-Id: I7fbf453aa16084c0b2a0079487cacb4e092ff664
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Less clunky due to having better constexpr support, plus fold
expressions.
Change-Id: I3eb1bd30e0124f89a052fffd16a6bc73ba79ec19
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
They return a pointer to the actual header, skipping the magic string.
This is done in preparation for the header located in an ELF note, which
won't have the magic.
Change-Id: I3eb1bd30e0124f89a052fffd16a8229bec2ad588
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The .qtmetadata section is already suppressed for static plugins, but we
carried this unnecessary magic string. For library file formats where we
don't have a scanner (Windows COFF PE), a library that linked multiple
static plugins could end up with multiple metadata found.
We can't suppress the header because the version of moc could be
different to the version of Qt, so we need to read the header version
too. Right now, the version isn't output by moc (all the logic is in
qplugin.h), but this could change again in the future. In any case, 4
extra bytes are not a big deal, so the header stays.
Change-Id: I3eb1bd30e0124f89a052fffd16a82088d8303081
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The skip-reason only cites Qt/X11. Convert the #ifdef into a platform
name check instead. The test also fails with the offscreen plugin, so
skip it for that as well.
Pick-to: 6.2
Change-Id: I49607b89f4b32359e81e1d9aadff2c3e03035c53
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDialog overrides setVisible to set focus on the default push button, or
(if there is no such button), make the first autoDefault push button the
default button. QDialog also explicitly sends a FocusIn event to the
focus widget in the dialog.
All this should not be done if the dialog does not become active after
getting shown, which will be prevented if the WA_ShowWithoutActivating
attribute is set.
Add a test case.
Fixes: QTBUG-8857
Pick-to: 6.2
Change-Id: If47021a4721a280ba45e95b43d0424cdacd9b4ea
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For a widget that implements height-for-width, the vertical scrollbar
becoming visible might be just enough to make the scrollbar unnecessary.
In that situation, the scrollbar flips on and off continuously.
To avoid that situation, make the width of the widget smaller until the
height fits without scrollbar, up to the point where we have space for
the scrollbar anyway.
The calcuation here is assumed to be cheap, but depends on the
heightForWidth implementation in the widget. Running the while-loop a
few dozen times should have no performance impact during resizing
and laying out the scroll area contents.
Add a test that confirms that within a brief period of time we only get
the one hide-event we expect.
Done-with: Zou Ya <zouya@uniontech.com>
Fixes: QTBUG-92958
Pick-to: 6.2 5.15
Change-Id: I0faeb5f9b1a226aada958c18333d9c2ac8203dd1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previously, when deciding where the actual data is, Frame was calling
padding() to test if offset is needed. A curious case with a DATA frame
containing compressed body and having 'PADDED' flag set with a padding
equal to ... 0, ended in a decompression error (and assert in 6.2 code).
Pick-to: 6.2 5.15
Fixes: QTBUG-97179
Change-Id: I9341a4d68510aa4c26f4972afdcd09a530d5a367
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When setCurrentIndex is called by removeTab, the old current index
might no longer be valid. Only update the lastTab value of the new
current tab if the old current index is still valid.
As a drive-by, use the validIndex helper function.
Fixes: QTBUG-94352
Pick-to: 6.2
Change-Id: I945e2093a90a1fccbba86d32b1113f83fedd41de
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unify cancel and finish in QPromise destructor in a single call. This
saves us one extra mutex lock and atomic state change.
Task-number: QTBUG-84977
Change-Id: Iac06302c39a2863008b27325fcf6792d4f58c8ae
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
On a mobile device, selecting text in a line edit brings up the text
action popup for select/copy/cut. In a spinbox where the user changes the
value using the buttons, this can be very irritating, without providing
any usability - the user is unlikely to start typing, at least not
without first transferring focus into the lineedit first to bring up the
keyboard.
This style hint allows styles to override the default behavior of
QAbstractSpinBox. Implement the customization for the Android style, and
add a test case for QSpinBox.
[ChangeLog][QtWidgets][QStyle] A new style hint, SH_SpinBox_SelectOnStep,
specifies whether pressing the up/down buttons or keys in a spinbox will
automatically select the text.
Fixes: QTBUG-93366
Change-Id: If06365a7c62087a2213145e13119f56544ac33b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
I staged the manual test a little too soon, forgetting it's not compiled
in CI
Change-Id: Iaae8b8caaf8433c45e66ff662bb9bb7b25a3b8bd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The new public API returns and notifies changes to the currently active
transport medium for the application. And there's a new private API to
report it, with backends to follow.
Task-number: QTBUG-91023
Change-Id: I527985f9dabcd7bc4a32f36597e21bc4ab664c4e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On macOS, when showing a window, we decide if it should be made
key and therefore active, if the app has no active modal session
or if the window's worksWhenModal returns true.
However, the window needs to be made key also when a modal window
is present, but not visible. Add this condition when checking if
the window needs to be made key.
This makes the behavior consistent with what happens when a modal
is minimized on macOS. The input focus is passed to the next window,
and the window appears active, even if it can not be interacted with.
Fixes: QTBUG-85574
Pick-to: 5.15 6.2
Change-Id: I204d4f912128f4a46840789fc2ee08e1b2716bfc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
For now it only has a trivial test (empty) and an all-surrogate test
(Chakma digits) - but at least now all conversions to and from UTF-16
are tested. In particular, there were previously no UTF-32 tests.
Pick-to: 6.2
Change-Id: I9317928a88b9990530126db80e4756b880a364df
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Closing a window with a native child results in the native child's
QWidgetWindow being closed. That explicitly calls setVisible(false)
on the child, which will still have the ExplicitShowHide attribute
set from the initial (explicit) show. Even though we then reset
the ExplicitShowHide, the WState_Hidden attribute will still be
set, so Qt considers the window to have been hidden, and not show
it again when the parent becomes visible.
Add a test case.
Fixes: QTBUG-96286
Fixes: QTBUG-79012
Fixes: QTBUG-71519
Change-Id: I482e6d5236c959d82ce66798176b259a3176972c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Remove dead code
Make logic to position test widgets more consistent across test functions
Consistent cursor positioning logic
Get rid of unnecessary event processing
Reduce calls to qWait with hard coded values
Use qWaitFor to establish asynchronous preconditions
Ignore expected warning messages
Expect-fail (instead of blacklist or skip) some tests that always fail
Ignore unpredictable events in childEvents test
Split large "render" test in multiple test functions
Task-number: QTBUG-52974
Task-number: QTBUG-26424
Change-Id: I206e114c2c1d9801e08600d3341c2738dc881f17
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There already was an attempt, but the wrong variable name was used.
Pick-to: 6.2
Change-Id: I4bdd73f86ff6aa5151e4427024b83daa57b54a39
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
This rewrite uses the actual structures supplied by the system's C
library, so it should be easier to read. It removes hardcoded constants
with little evident meaning in favor of sizeof() and the macros from
that header. It also removes advancing the data pointer in favor of
having absolute offsets.
The resulting implementation is stricter than the original, checking
more fields in the header. Because the QPluginLoader and QFactoryLoader
users may make decisions based on availability of plugins before
attempting to load them, it's better to be stricter here than to fail
later when trying to dlopen() them.
Debugging and testing are much improved. Instead of stored artifacts, I
added a routine to modify a valid plugin to make it invalid, given the
conditions we've found so far.
If you turn debugging on for this category, you'll see things like:
not-elf.fcqdMq.so : Not an ELF file (invalid signature)
wrong-word-size.QrnSAx.so : ELF 32-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
invalid-word-size.bOkXvp.so : Invalid ELF file (class 0), LSB (GNU/Linux)
unknown-word-size.ogYKeF.so : Invalid ELF file (class 66), LSB (GNU/Linux)
wrong-endian.owiElX.so : ELF 64-bit MSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
invalid-endian.FRxClR.so : ELF 64-bit invalid endianness (0) (GNU/Linux)
unknown-endian.FfvRrP.so : ELF 64-bit invalid endianness (65) (GNU/Linux)
elf-version-0.gPTdpQ.so : ELF 64-bit LSB (GNU/Linux), file version 0
elf-version-2.jlIUUg.so : ELF 64-bit LSB (GNU/Linux), file version 2
executable.LlXiFp.so : ELF 64-bit LSB (GNU/Linux), version 1, executable, x86-64
relocatable.UsOYuy.so : ELF 64-bit LSB (GNU/Linux), version 1, relocatable, x86-64
core-file.hqvNRz.so : ELF 64-bit LSB (GNU/Linux), version 1, core dump, x86-64
invalid-type.CIJgfS.so : ELF 64-bit LSB (GNU/Linux), version 1, unknown type 259, x86-64
wrong-arch.UcNmgz.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, AArch64
file-version-0.lZYuda.so : ELF 64-bit LSB (GNU/Linux), version 0, shared library or PIC executable, x86-64
file-version-2.ucfdwL.so : ELF 64-bit LSB (GNU/Linux), version 2, shared library or PIC executable, x86-64
no-sections.rSjsHh.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
no-sections.rSjsHh.so : contains 0 sections of 64 bytes at offset 0 ; section header string table (shstrtab) is entry 0
no-sections.rSjsHh.so : no section table present, not able to find Qt metadata
qtmetadata-executable.vrxcIf.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
qtmetadata-executable.vrxcIf.so : contains 42 sections of 64 bytes at offset 997256 ; section header string table (shstrtab) is entry 41
qtmetadata-executable.vrxcIf.so : shstrtab section is located at offset 996831 size 423
qtmetadata-executable.vrxcIf.so : section 0 name "" type NULL flags X offset 0x0 size 0x0
qtmetadata-executable.vrxcIf.so : section 1 name ".note.gnu.property" type NOTE flags AX offset 0x2a8 size 0x30
qtmetadata-executable.vrxcIf.so : section 2 name ".note.gnu.build-id" type NOTE flags AX offset 0x2d8 size 0x24
qtmetadata-executable.vrxcIf.so : section 3 name ".hash" type HASH flags AX offset 0x300 size 0x44c
qtmetadata-executable.vrxcIf.so : section 4 name ".gnu.hash" type 0x6ffffff6 flags AX offset 0x750 size 0x3b8
qtmetadata-executable.vrxcIf.so : section 5 name ".dynsym" type DYNSYM flags AX offset 0xb08 size 0xd50
qtmetadata-executable.vrxcIf.so : section 6 name ".dynstr" type STRTAB flags AX offset 0x1858 size 0x15d8
qtmetadata-executable.vrxcIf.so : section 7 name ".gnu.version" type 0x6fffffff flags AX offset 0x2e30 size 0x11c
qtmetadata-executable.vrxcIf.so : section 8 name ".gnu.version_r" type 0x6ffffffe flags AX offset 0x2f50 size 0xb0
qtmetadata-executable.vrxcIf.so : section 9 name ".rela.dyn" type RELA flags AX offset 0x3000 size 0x480
qtmetadata-executable.vrxcIf.so : section 10 name ".rela.plt" type RELA flags AX offset 0x3480 size 0x7e0
qtmetadata-executable.vrxcIf.so : section 11 name ".init" type PROGBITS flags AX offset 0x4000 size 0x1b
qtmetadata-executable.vrxcIf.so : section 12 name ".plt" type PROGBITS flags AX offset 0x4020 size 0x550
qtmetadata-executable.vrxcIf.so : section 13 name ".plt.got" type PROGBITS flags AX offset 0x4570 size 0x8
qtmetadata-executable.vrxcIf.so : section 14 name ".text" type PROGBITS flags AX offset 0x4580 size 0x110e
qtmetadata-executable.vrxcIf.so : section 15 name ".fini" type PROGBITS flags AX offset 0x5690 size 0xd
qtmetadata-executable.vrxcIf.so : section 16 name ".rodata" type PROGBITS flags AX offset 0x6000 size 0x473
qtmetadata-executable.vrxcIf.so : section 17 name ".qtversion" type PROGBITS flags AX offset 0x6478 size 0x10
qtmetadata-executable.vrxcIf.so : section 18 name ".qtmetadata" type PROGBITS flags AX offset 0x64a0 size 0x19b
qtmetadata-executable.vrxcIf.so : found .qtmetadata section
qtmetadata-writable.stzwrk.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
Change-Id: I42eb903a916645db9900fffd16a4437af9728eea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
clang warns that: local variable 'big' will be copied despite being
returned by name [-Wreturn-std-move]
So force the intended move using std::move.
Change-Id: If5ff557c1b577789e6659783d8106295fafb3485
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add startOnReservedThread that specifically releases a reserved thread
and uses it atomically for a given task. This can make a positive
number of reserved threads work.
Change-Id: I4bd1dced24bb46fcb365f12cbc9c7905dc66cdf1
Reviewed-by: David Faure <david.faure@kdab.com>
Given on most CI configurations we run tests only on debug builds, this
means that effectively we don't test JIT paths (JIT is kept disabled in
debug builds). To keep it enabled in a test, we have a few options:
* export a developer-build-only variable from QtCore, to force JIT
usage, and set it in the test. This is still suboptimal as many
configurations aren't using developer builds in the first place;
* use the already existing QT_REGEXP_USE_JIT environment variable,
setting it from CMake/CTest. The problem here is that although add_test
does support it, we don't expose it through our wrapper functions;
* just set that env variable from within the test itself. I went for
this option.
Change-Id: I73abfb7fc0d76ec77e881f24c5daf5be304ab948
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After calling close(), the socket can enter 'Closing' state, in which
we try to write buffered data before disconnecting. As the device is
already closed, we must disable any pipe reader activity and clear the
read buffer.
Change-Id: I8994df32bf324325d54dd36cbe1a1ee3f08022d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
- getgrgid/getpwuid are not supported
- the default constructor of "ObserverOrUninit" must be referenced for GHS compiler
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I24093da76e116aba4b87a8f5c5763b03d082a2cd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Those files were moved as part of Qt3D as its the sole
user of these
- Also removed associated unit tests
Pick-to: 6.2 5.15
Change-Id: I302bc219218a58071c86d2447cb4449601fca32c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Both functions took a QString for the input file name, but while the ELF
parser had an optional QLibrary pointer (which was never null) where to
store the error string, the Mach-O parser received a pointer to a
QString. So make both of them take a single in/out QString pointer,
which has the file name on input and is cheap for us because of COW.
Drive-by fix the name of the static function in qmachparser.cpp from
"ns" (which stood for "not suitable") to "notfound".
Change-Id: I3eb1bd30e0124f89a052fffd16a8182f4f8541c3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When we created the functionality, the levels were not yet standardized.
Now they are and you can use -march=x86-64-v3 (for example) to get to
them. We're making a split between "v1" and "baseline" here for the
benefit of 32-bit, which is not included in the ISA levels.
Change-Id: I2de1b4dfacd443148279fffd16a397a700b9a15a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This will allow us to make changes in QtCore itself, without having to
worry about moc compatibility.
The output uses an #ifdef so this version of moc can still be used to
compile earlier versions of Qt (usually, in cross-compilation
environments). See discussion in the mailing list[1].
[1] https://lists.qt-project.org/pipermail/development/2021-September/041732.html
Change-Id: I2de1b4dfacd443148279fffd16a39784c80c5f3b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch removes most of the checks that are made using C++20
__cpp_* macros for features available in C++17 and earlier.
Library feature check macros (__cpp_lib_*) are unaffected.
Change-Id: I557b2bd0d4ff09b13837555e9880eb28e0355f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The --skip-benchlib option was misnamed: there are several benchlib
tests, of which it only skipped the callgrind one. As there is no
other test involving callgrind, rename to --skip-callgrind.
Change-Id: I0179fd35dd79c525f79e4a28a626e964323409bf
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With the QRegExp variant removed, it was weird to have all QSFPM
tests in "tst_qsortfilterproxymodel_regularexpression", even those
completely unrelated to regexps. Instead of reuniting into a single
executable as before, I simply split it out in separate executables:
* tst_qsortfilterproxymodel has the "standard" QSFPM tests
* tst_qsortfilterproxymodel_regularexpression has the regexp-related tests
* tst_qsortfilterproxymodel_recursive is separate as before
Change-Id: I345530b4352671164008bba4805af7b12ac90247
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can only start timers in threads started via QThread, and even then
we cannot assume that the thread runs an event loop. So only start the
timer when we are in the main thread.
Add a test that verifies that we don't get the warning message.
Pick-to: 6.2
Change-Id: I40d7d9ff115720f9ecd3eedaebbade2643daf843
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Don't bother overwaiting in waitForDone(), if it was done at one point
after it was called we can return true. And do not stop threads recently
awakened by a startThread call as they have tasks to do.
Make allowing at least one thread regardless of reservation more
standard instead of hacked in certain places.
Pick-to: 6.2
Change-Id: I304bcdc5822f440d5e72fc33ba2aa1678c9ba0d0
Reviewed-by: David Faure <david.faure@kdab.com>
This header is a C++17 feature that is already used unconditionally
in qtypeinfo.h.
Change-Id: I26330d298e95102f3e94c0c69fc95c1025666eb4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Testlib is not thread safe. Store the status into variable and check
it in the main thread instead.
Pick-to: 6.2
Change-Id: I840c8a3dceb1115a1b81ffeaa0fab96f9d2f1ff0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt requires a compiler that support C++17 thus __cplusplus
is always 201703L or higher. This patch removes checks
for __cplusplus value that always succeed.
Change-Id: I4b830683ecefab8f913d8b09604086d53209d2e3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Item views can open an editor widget on the first key press, and need to
take special care not to break input methods. The initial key press
starts compositing by the system input method, which is then interrupted
by the focus transfer to the editor.
To solve this problem, the widget needs to keep focus while the initial
composition is ongoing, and only transfer focus to the editor once the
composition is either accepted or cancelled by the user. Add a state flag
that is set during this initial preedit phase.
During this initial composition, the item view will receive all input
method events, and needs to forward these to the open, but not yet focused
editor for the user to get the correct visual feedback during the preedit
phase. The item view also needs to report to input method queries on
behalf of the editor to make sure that the IM UI is correctly positioned
without covering the user input.
Implement a test that simulates the sequences through synthesized
QInputMethodEvents; we can't simulate the entire system input stack.
Fixes: QTBUG-54848
Change-Id: Ief3fe349f9d7542949032905c7f9ca2beb197611
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In addition to checking the .lnk extension, check that the
the specified path is not a path to a directory.
Pick-to: 6.2
Fixes: QTBUG-85058
Change-Id: I83cef3d94c6ffa82a88f374c5b41779e88fe40b8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
At the current state, Qt::WA_StaticContents is not respected on any
platform, and optimizations for opaque widgets is not implemented on
Cocoa.
Task-number: QTBUG-73117
Change-Id: I48b7b0c4436da5a609fdbe51bb1c9789a2a059bd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is a manual test of QWindow::requestActivate() and how it
interacts with implicit activation from the window system. Written in
order to test QtWayland, but hopefully also useful for testing on other
platforms.
Task-number: QTBUG-91542
Change-Id: Id18dc6d146d213a7c730cff343d9fc25f6c42514
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To make it a little cleaner
Task-number: QTBUG-91023
Change-Id: Ib99cc722b47835d13707beeeea35573729e4b032
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Unix QThread implementation stores pthread_t as a system thread ID
when the thread is created, but never resets the system ID when
those threads are destroyed. Some implementations may reuse the
same thread IDs for new threads, and this may cause QThread::wait()
to erroneously complain that "Thread tried to wait on itself".
This patch sets the system thread ID to nullptr when the thread is
about to exit and be destroyed by the system.
A regression test is added to tst_qthread.
Fixes: QTBUG-96846
Pick-to: 5.15 6.2
Change-Id: I0850425dd0e09af50e59c9038e7e662a2a624beb
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWidget::setParent might be called to change the window flags, without
changing the parent. For those cases, we don't have to clear the focus.
Decouple the newParent state from the wasCreated flag. In most places
where newParent was tested, wasCreated was either tested previously and
can't be false anyway, or the code executed is irrelevant for widgets
that are not yet created (there can't be a paint manager). In the
remaining case, test wasCreated explicitly to maintain existing logic.
Add test for the cases where the previous code broke the focus, both
for QWidget and QDialog.
Fixes: QTBUG-93005
Pick-to: 6.2
Change-Id: I39dc179c2d348054de3927aa8b69eecef4935511
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
Utilizes the native pdf renderer of macOS, so the test is only enabled
on that platform. As the PDF generation should be platform independent
anyway, this should not matter.
Pick-to: 6.2 5.15
Change-Id: I8b6b70562d1f24fdb77795aa7eb5843279aaae85
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Unlike the other conversion functions, convertWithPalette() did not
call copyMetadata().
Fixes: QTBUG-96926
Pick-to: 6.2 5.15
Change-Id: I2b171cec16bc5a90d33e80d6fe178c650ed3fe36
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The multi-state return code was a legacy of how Arvid wrote the ELF
parser code back in the day, the fact that it scanned for two different
types of plugins in Qt 4 and that the metadata could exist in different
places. None of that matters nowadays: who cares if the file is a
corrupt binary, not a valid binary, does not have the right
architecture, or has no suitable section? It's not a plugin, period.
The Qt 4 plugin mechanism was removed for Qt 5.0 in commit
7443895857 ("Remove support for Qt 4 style
plugins").
Change-Id: I42eb903a916645db9900fffd16a442d800399b98
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The Cocoa QPA plugin no longer tracks popups, but dispatches enter/leave
events when popups show and hide. So the special handling in tests and
QWidgetWindow can go away now.
Change-Id: Ib6ef00689de231996e5e57ecdd8fd0d4c861d68b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Debug builds were broken.
WARNING: tst_QPluginLoader::errorString() testdata bin/libtst_qpluginloaderlib.dylib could not be located!
$ ls -l bin
total 112
-rwxr-xr-x 1 tjmaciei staff 77296 Sep 14 08:46 libtheplugin_debug.dylib
-rwxr-xr-x 1 tjmaciei staff 33408 Sep 14 08:46 libtst_qpluginloaderlib_debug.dylib
Pick-to: 6.2
Change-Id: I42eb903a916645db9900fffd16a4bb0a51ef967c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since macOS doesn't give us any event when a modal window opens,
we need to do so ourselves explicitly so that the current mouse
window gets a leave event when e.g. a popup opens, and an enter
event when the popup closes again. The case for modal dialogs is
partially handled by QGuiApplication already.
Note: We cannot rely on the transientParent of the opening/closing
window, as it's nullptr for QMenu windows even if the QMenu has
a widget parent.
Add a test for enter/leave events when a secondary window opens,
covering both the dialog and the popup case. For the dialog case,
we sometimes get two Enter events when the dailog closes, which
we have to tolerate for now.
To make the test pass on b2qt platforms, fix the offscreen plugin
to explicitly send enter/leave events in the same way as Cocoa
now does.
Fixes: QTBUG-78970
Pick-to: 6.2
Change-Id: If45e43e625e8362c3502c740154f6a6a8962b9e9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit efb90f6e7e.
Reason for revert: behavior change for signal listeners
Change-Id: Ibe3c5d496cd61a9fccab17a10cc9fda8334fc9d4
Reviewed-by: Björn Schäpers <qt-codereview@hazardy.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QT_VERSION is now at least QT_VERSION_CHECK(6, 3, 0), so remove all
checks against Qt 6.0.0 or earlier. They are superfluous. Tidied up in
some places in the process, particularly #include order.
Change-Id: I2636b2fd13be5b976f5b043ef2f8cddc038a72a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Needed for subsequent change that will check and error out if the
version is lower than 3.16. We do that to ensure all policies
introduced by CMake up to version 3.16 have their behavior set to
NEW.
Pick-to: 6.2
Task-number: QTBUG-95018
Change-Id: Ieaf82c10987dd797d86a3fd4a986a67e72de486a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
To allow reading from a slot connected to the aboutToClose() signal,
we should call QIODevice::close() just before closing the inner device.
This patch amends 21f3ff65b8.
Pick-to: 6.2
Change-Id: Ic8cd00497e1bdf923b980c26e9ca874b77e82f89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
- It does however use the Unix backend for system locale, so don't entirely
skip setting environment variable, only leave out LC_MEASUREMENTS.
Pick-to: 6.2
Change-Id: If292f1077851b29da2a21af7c46f4db9c0e4ed19
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Amends ca54b741d6.
operator< is not constrained in MSVC's standard library, either.
Pick-to: 6.2
Fixes: QTBUG-96690
Change-Id: Ibcbb9e53a1f9e8b13786f6d8c01489c61d8d2d7f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The docs (10 lines above) say it will find the backend case
insensitively. Thus the comparison should also be case-insensitive.
Pick-to: 6.2
Change-Id: I65901ed81b7d8bdfcf76f5b6c7b40efe63245503
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Showing, hiding, and showing a window can result in the Xcb QPA plugin
warning about
qt.qpa.xcb: internal error: void QXcbWindow::setNetWmStateOnUnmappedWindow()
called on mapped window
The point of the test is to verify that we get a paint event on a window
that is shown again after having been hidden, not to verify that async
windowing systems can handle a show/hide/show sequence. So wait for the
window being exposed before we hide it.
Pick-to: 6.2 5.15
Change-Id: If91a9926613645e78e332dacff34bd57e4034b6f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
After the recent refactoring in 28b14b966f
this test should run stable on all platforms. However, the way the test
was written made it quite flaky. Simplify it to verify that closing one
window doesn't prevent a second timer to fire (which it would if closing
the first window already quit the application).
Change-Id: I0306792cd7573ebd3418d1aabffe2b78700ec2d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Verifies that we get the messages we want, and makes it easier to see
relevant debug output.
Pick-to: 6.2
Change-Id: Ide92959b120f325badbf200236cdc85f72226e1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This amends commit 68f19fb630 to only
consume one 't' from the format string, to match qlocale.cpp's
serialization of time-zone specifiers, which only consumes one, so
will repeat the time-zone specifier as many times as unquoted t
appears in the format. It's hard to imagine why anyone would want this
behavior, but it's what our serialization has always done and parsing
should match serialization.
Add test-cases for double time-zone specifier.
Delete a lie in the process.
Task-number: QTBUG-95966
Change-Id: I574896040a74085dee89a4fefd8384be44ad827b
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QVLA itself is non-relocatable due to self references. (ptr pointing
to array[Prealloc] as long as capacity < Prealloc)
Seems we shot ourselves in the foot in multiple places with this.
Pick-to: 6.2 6.2.0
Fixes: QTBUG-96619
Change-Id: I57a2ce539b671326cd352dbe57a1f3d4c46a6456
Reviewed-by: Tobias Koenig <tobias.koenig@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QDoubleValidator::setRange() used to have 3 parameters, with
the third one (the number of decimals) having a default value of 0.
Such default value does not make much sense for a *double* validator.
Also, since a default value was used, omitting the decimals was
silently overwriting the previous decimals value, discarding the
value that could be previously explicitly specified by user.
[ChangeLog][QtCore][QDoubleValidator][Important Behavior Changes] The
QDoubleValidator::setRange() method now has two overloads.
The first overload takes 3 parameters, but does not support a
default value for decimals.
The second overload takes only two parameters, not changing the
number of decimals at all.
Hence, the number of decimals will only be changed if the user
explicitly specifies it.
To maintain the old behavior of setRange(), pass 0 as the 3rd
argument explicitly.
Note that it is a source-incompatible change. But it should be fine,
because using QDoubleValidator with 0 digits after decimal point does
not make much sense and so, hopefully, is not that common.
At the same time, change the default-constructed QDoubleValidator
to use -1 for decimals, which allows arbitrarily many digits in
the fractional part. The value was previously 1000, which allowed
more than anyone would reasonably use, so this should make no
practical difference.
Some more unit tests to cover the behavior of the setRange()
overloads are also added.
As a dirve-by: remove unnecessary QValidator::State to int conversions
in the unit tests. QCOMPARE is capable of comparing these enums and
provides a better output in case of failure for enums.
Task-number: QTBUG-90719
Change-Id: I523d6086231912e4c07555a89cacd45854136978
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This signal is emitted by the QIODevice itself, so we don't have to
emit it from QProcess::close().
Pick-to: 6.1 6.2
Change-Id: I9165b3eebadc17a66cc834d5ef54441d13f23d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To match the Unix behavior, we should emit errorOccurred() signal and
close the channel if the write operation fails.
Change-Id: Iac3acb18dbbfe6e7e8afb2555d9adaff1fe98d0f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In a blocking application, receiving the results of write operations
must be synchronized with the waitFor...() functions. But, clearing
the buffer in another thread can cause the code
localsocket.write(...);
QVERIFY(localsocket.bytesToWrite() > 0);
to fail unexpectedly, if the socket has been disconnected between
the calls.
So, defer resetting the buffer until checkForWrite() is called.
Change-Id: I8c21036aab6a4c56d02c0d9a18d4bbce52d724f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The test passes consistently in local test runs on macOS 10.15.
Change-Id: I6f05b27d3cbf930475a435c41db267a00b1726b0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
...when starting a render/compute pass.
This matches most other backends in fact, the Vulkan backend has
just certain historical differences, and is complicated due to the
fact that it has the option of using secondary command buffers for
passes that specify ExternalContents (to support the case of wanting
to issue direct Vulkan commands in a code block surrounded by calls
to beginExternal and endExternal).
Not resetting state such as the currently bound index buffer when
starting a pass quickly blows up when two consecutive render passes
use different settings, one targeting the primary while the other
the secondary command buffer. Instead of further complicating the
logic, just reset the relevant state in every begin(Compute)Pass.
Comes with an autotest that is crafted so that it manages to
downright crash when run with Vulkan without the fix to the backend.
Fixes: QTBUG-89765
Pick-to: 6.2
Change-Id: I8dc47bd179c17d45a0556ec31200dc90c4b67ca5
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The test used to hang on waitForRead(), sometimes, which underneath
involve a poll()+read() syscall pair.
When this happened, the IMAP data came together with the proxy data on a
previous poll()+read() call and the proxy code had already consumed it.
We now wait for data only if data is not already available.
Fixes: QTBUG-96345
Pick-to: 6.2
Change-Id: I084f5d1268a5091ea614fcec91c8d356dcb90d9f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The unversioned libcrypto.dylib that's shipped with macOS 10.15 will
result in a crash if loaded, with a message saying that the unversioned
library should not be loaded, as it doesn't provide a stable ABI.
Task-number: QTBUG-95249
Pick-to: 6.2 5.15
Change-Id: I49325e5d675155e90840cc93623549f725bc77b4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The provided implementation tries to fix positions for the group
separator.
In case of scientific notation it can also converts the value to
normalized form.
It uses QLocale::FloatingPointShortest internally to convert the
double value back to string, so the number of decimals may change
after calling this method.
Change-Id: I963bc5f97b653e2bb912f4b95b09a4d1ee201e7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Follow what has been done for QRhiShaderResourceBindings. Have a way
to retrieve an opaque blob (that just happens to be a list of integers)
so that a simple == comparison can be used to determine compatibility
even when the objects from which the blob was retrieved are no longer
alive.
The contract is the following:
bool a = rp1->isCompatible(rp2);
bool b = rp1->serializedFormat() == rp2->serializedFormat();
assert(a == b);
Pick-to: 6.2
Change-Id: I45e7d05eeb6dfa2b2de474da0a0644912aaf174a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
tests/auto/tools/moc/CMakeFiles/tst_moc.dir/tst_moc.cpp.o: in function `tst_Moc::os9Newline()':
qtbase/tests/auto/tools/moc/tst_moc.cpp:1225: undefined reference to `Os9Newlines::staticMetaObject'
tests/auto/tools/moc/CMakeFiles/tst_moc.dir/tst_moc.cpp.o: in function `tst_Moc::winNewline()':
qtbase/tests/auto/tools/moc/tst_moc.cpp:1239: undefined reference to `WinNewlines::staticMetaObject'
Pick-to: 6.2
Change-Id: I629d67c1190e09b26dc09e41cb7170cb0eadf1cb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
By going via QWidget::close() we ensure that if there's a QWidgetWindow
backing the dialog (which is almost always the case), we will plumb down
to QWindow::close(), resulting in QEvent::Close events to the QWindow.
Since we don't want QDialog subclasses to receive a call to a closeEvent
override that they didn't receive before (and which they might interpret
as rejection or cancellation), install a temporary event filter that
eats the QCloseEvent resulting from the call to close().
Task-number: QTBUG-53286
Change-Id: Ie8f6f0cb3160acfd5865dc74f0a7b6d87f838724
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Move the status setting and resetting back into handleClose so that we
don't end up with it being set if handleClose is never called in response
to a close attempt. This can happen when QWindow's platform window has
already been destroyed.
Since QWindow::close handles that case gracefully and returns true,
we can safely call it multiple times.
Add test coverage to verify that we get exactly those close event
calls that we want.
Change-Id: Ica77bf17c26d923c3b79b1e5a688addbc88a6277
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Having logging in the test's log widget is nice, but we don't want
to silence the normal logging, as that might confuse someone who
expects to see normal log messages, not knowing there's a dedicated
log widget in the test.
Pick-to: 6.2
Change-Id: I7828f740cfb8cc2eae8da98b9b8facd4a57fa37b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Ensure that expired threads have actually finished before attempting
to restart them. Calling start() on a thread that is not yet finished
does nothing.
Add a regression test into tst_qthreadpool that attempts to trigger
reuse of expired threads and verifies that all submitted tasks
execute.
Fixes: QTBUG-72872
Pick-to: 6.2
Change-Id: I2109b628b8a4e91491115dc56aebf3eb249646b5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QLocale::system() was not making use of QLocaleFormat::Narrow, always
treating it in the same way as QLocaleFormat::Short.
This patch fixes the issue for day and month names.
The implementation falls back to CLDR if system locale fails to
provide some data.
Pick-to: 6.2
Task-number: QTBUG-84877
Change-Id: Ia37e59dbf02d7a5e230f2767d294b9ab7de37f33
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- Exclude Green Hills compiler from Catch2's POSIX signal handling.
GHS, at least on INTEGRITY, doesn't support full POSIX signals.
Task-number: QTBUG-96176
Pick-to: 6.2 6.2.0
Change-Id: Ifec06dca43ed766cb7335e40fc357d0d7bc463a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
System headers were jumbled in with Qt headers. Separate those out and
use standard names for Qt headers. Tidied some #if-ery.
Change-Id: Ic8c61797303567eeaef48e2560e91924ddb380f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLocale and QString tests had copies of a TransientLocale; we've
recently improved the QLocale one. Rather than duplicating those
rather complicated improvements, finally share a common version.
In the process, I noticed that setlocale() only returns the prior
value when passed nullptr as the new value; so rework the
implementation to get that right, so that it now correctly restores
the prior locale. That, in turn, means there's now a later call to
setlocale(), when we actually set the changed setting, which may
invalidate the earlier return; so copy it to a QByteArray before the
second call.
Included Ivan Solovev's improved version of how to reset the locale,
since TransientLocale needs it.
Pick-to: 6.2
Change-Id: I4cb1efbda42f0e2cdd934e04b3b3732ce0f45a06
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Qt 6.x does not need to be able to read the old Qt 5-based binary JSON
metadata. The QT_WARNING_DISABLE_DEPRECATED was needed in 5.15 while we
used the then-deprecated functions to decode.
Pick-to: 6.2
Change-Id: I2de1b4dfacd443148279fffd16a39ee074da3ef4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It was disabled during the CMake port, but appears to work now.
Change-Id: I2de1b4dfacd443148279fffd16a3a166a3e10671
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
a332f3fabc disabled resolving all fonts
on the system for every font lookup, which was a significant startup
time improvement. But it also caused a regression: When a font has
an alias which shares the name of a proper font, then this would
not be resolved correctly.
This is fairly typical on Windows/GDI due to backwards-compatibility.
Instead of being collected under a shared typographical family, fonts
are disambiguated by adding the style name to the family name. The
proper typographical name is still available, but this is not
enumerated by the system.
So "Segoe UI" for instance, will be available as "Segoe UI",
"Segoe UI Light", "Segoe UI Bold" etc.
When we populate family aliases, we register that "Segoe UI Light"
is actually "Segoe UI" with Light weight, and prior to
a332f3fabc this would be done implicitly.
But after the optimization, we would only populate family aliases once
we stumbled over a font request for a non-existent font. For "Segoe UI",
we would simply return the regular weight font as the best imperfect
match.
The fix is to populate font family aliases not only when the family is
non-existent, but when the match is imperfect, e.g. if we are asking
for a Light weight font and only finding a regular one. User code can
still avoid this somewhat expensive operation by using the full
family names on Windows.
This also requires a fix to a test. When removeApplicationFont() is
called, we invalidate the font database, so it will be reset to a state
that does not contain the family aliases. Therefore we cannot guarantee
that it is identical to what it was before the test started, since this
depends on what has happened previously in the application.
[ChangeLog][QtGui][Text] Fixed an issue where some font styles and weights
would not be selectable. This was especially noticeable on Windows.
Pick-to: 5.15 6.1 6.2
Fixes: QTBUG-94835
Change-Id: I892855edd1c8e3d3734aace396f6000d897d2ec4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The h2 server is running in a separate thread, so while the previous
test was finished and the server was deleted, it could still emit
and have a queued emission in-flight which would be picked up by
the next running test.
Pick-to: 6.2 6.1 5.15
Change-Id: I26b1bc711df7473032d6078f35f8aca37c40137e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test was failing because it didn't account for the platform behavior.
Task-number: QTBUG-30040
Pick-to: 6.2
Change-Id: I7c523c06f0bfa459c1532cee721718bebc1858c4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The test is randomly failing in the CI on QEMU. Couldn't reproduce it on
the actual armv7 hardware, so most likely it's not a Qt bug.
Fixes: QTBUG-96103
Pick-to: 6.1 6.2
Change-Id: I60b7264c6ce44b3b327fdd0dbcede006717c65a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Minor clean-up.
Split two long lines and added braces, called for by Qt coding style.
Turned some QDebug("this line should never be reached...") into QFAIL();
that should make the effor a bit more prominent if it ever happens.
Likewise for a qDebug() << "ERROR: ..." for code not meant to run.
Change-Id: I1d34fe202f269eb3ad8f58feaabed809e4fec99c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
The system behavior is to not show these kinds of dialogs as modal,
and we've documented that for QMessageBox.
However, calling show() instead of exec() is not enough, as the
default constructor of QMessageBox will set the modality of the
widget to application-modal. We need to explicitly override this.
[ChangLog][macOS] QMessageBox::about(Qt) now shows dialog non-modal,
as documented.
Pick-to: 6.2
Change-Id: I6bb59efb81feb23122276a9eede71b2f20c9d7c6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The name of is_utf8_encoded type seems to imply that QByteArray and
const char * contain UTF-8 encoded data. This is not always the case.
When used with QByteArray API, those types are handled as containing
ASCII-only. It's only when used with APIs of other classes (QString,
QLatin1String) they are handled as UTF-8. This renames the check to
is_bytearray_like_v and clarifies its usage. No need to handle
QUtf8StringView this way because it works just fine with the current
testcases.
While at it, also remove unused is_latin1_encoded trait.
Task-number: QTBUG-92021
Change-Id: I44e40cf3c0dd07e5b3cf1e47ff7a04f1c548aa97
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing a, ap, A and AP specifiers all force the case of the
formatted am/pm indicator. The indicators returned by QLocale's
amText() and pmText() methods are those given in CLDR, with no case
coercion. Application writers may reasonably want these strings used
verbatim, rather than having to chose a case and impose it on the
locale's indicators, in defiance of national custom. For example,
while en_US uses upper-case indicators by default, cs_CZ uses
lower-case ones. An application author writing a time format has been
forced to chose which of these locales to be wrong in.
Add support for aP and Ap specifiers, whose mixed case indicates that
the locale's case is to be respected. Amend an existing test-case of
tst_QLocale's formatDateTime() that used Ap (expecting, of course, an
upper-case indicator followed by a stray p) to now expect the
locale-appropriate-cased indicator. Extend formatTime() to test cases
using aP and Ap, to illustrate the difference between en_US and cs_CZ.
Rework QDateTimeParser to also support the new format specifier. This
required expanding its Case enum, used by the getAmPmText() method,
which was formerly shared with QDateTimeEditPrivate; however, as that
class no longer makes any reference to this method, it and the enum
can be made private, allowing a systematic clean-up of their use.
Added test-cases for both serialization and parsing; and amended some
existing parsing tests to verify am/pm indicators are matched
case-insensitively.
[ChangeLog][QtCore][Important Behavior Changes] Time formats used by
QLocale, QTime and QDateTime's parsing and serialization now recognize
'aP' and 'Ap' format specifiers to obtain an AM/PM indicator, using
the locale-appropriate case for the indicator, where previously the
author of a time format had to pick a case that might conflict with
the user's locale. For QTime and QDateTime the locale is always C,
whose indicators are uppercase. For QLocale, the case will now match
that of amText() or pmText(). Previously, 'aP' would have been read as
a lower-case indicator followed by a 'P' and 'Ap' as an upper-case
indicator followed by a 'p'. The 'P' or 'p' will now be treated as
part of the format specifier: if the prior behavior is desired, either
use 'APp' or 'apP' as format specifier or quote the 'p' or 'P' in the
format. The prior 'a', 'ap', 'A' and 'AP' specifiers are otherwise
unaffected.
Fixes: QTBUG-95790
Change-Id: I26603f70f068e132b5c6aa63214ac8c1774ec913
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Export configuration() and setConfiguration() from the offscreen
platform plugin using QPlatformNativeInterface. tst_qighdpi can
then resolve and make use of them since it always uses the offscreen
platform plugin.
Add screenDpiChange() auto test.
Change-Id: I459b4df5d94ec4991234a346e3a94618cb3485e9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Noticed the missing tests while implementing fixup() for
QDoubleValidator.
Change-Id: Ic0e053a6385e311e4a491c8bff8ec7fbb83c3944
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The code for deducing the type of output sequence was assuming that the
input sequence is always a template class and was trying to use the
corresponding container type for the output sequence. Fixed the
deduction code, to assume that the output sequence has the same type as
the input sequence, when it's not a template class. Also added tests to
verify that all QtConcurrent functions support non-template input
sequences.
Fixes: QTBUG-30617
Pick-to: 6.2 6.1
Change-Id: I486fe99f3207cfff5dcceb3712cc7de863067edb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Be idiomatic and return the output iterator one past the last element.
Otherwise passing in a plain pointer (as exercised by the autotest now)
fails to function because we write over the same 4 elements again and
again for each binding.
Pick-to: 6.2
Change-Id: If74463fa5140ffa2b1d5be97b71868848ad46614
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Instead of making it return a non-useful nullptr.
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a245cce5ea65f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The operator checks cause compilation errors when trying to check for
their existence for recursive containers. This happens because of trying
to check for the operators on the template parameter type(s), that
inherit from the container itself, which leads to compilation errors.
Introduced alternative versions of the operator checks (with _container
suffix), that first check if the container is recursive, i.e. any of its
template parameter types inherits from the given container, and skips
the operator check, if that's the case.
The fix is done for all Qt container types that had the problem, except
for QVarLengthArray and QContiguousCache, which don't compile with
recursive parameter types for unrelated reasons.
Fixes: QTBUG-91707
Pick-to: 6.2 6.1
Change-Id: Ia1e7240b4ce240c1c44f00ca680717d182df7550
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
...by the Qt Quick renderer, for example.
A typical Qt Quick material binding set serializes to 8 uints. This
would not demand a container like QVector. However, being implicitly
shared is essential here due to the intended usage (query the
serialized blob, put it into a cache key, hash it, compare it, all
without any copying and new allocs; we can afford an extra alloc
upon each srb construction, but don't want more afterwards in the
rendering engines)
Also make it clear in the pipeline docs that the optimization Qt Quick
is (soon going to be) doing is legal. (the srb ref in the pipeline can
be dead and dangling as long as every call to setShaderResources()
specifies a layout-compatible alternative)
Pick-to: 6.2
Change-Id: I97efbea1fa3516b10c9832adbab0a21b7bc0845d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The parser was lenient in accepting backslashes followed by invalid
characters, but accidentally sign-extended everything above 0x7f causing
broken outputs that weren't valid UTF-16 either.
For example, the sequence "\\\xff" (backslash followed by 0xff) produced
sequence "\ud7bf\udfff" (U+D7BF is not a surogate pair).
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a113c703a7696f
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reapplies the fix from 1ecf2212fa,
using QApplication::translateRawTouchEvent to dispatch the touch event
received by the QGraphicsProxyWidget to the relevant child widgets
under each touch point.
In addition, limit the implicit grabbing of each touch point before
sending the event to those cases where we have to: touch pads, and
if the target widget comes from a closest-widget matching. And don't
call the QTouchEvent override of QEvent::setAccepted() on QTouchEvent
instances in QGraphicsView classes, as this will override each event
point's acceptance state.
This way, we can identify which touch points have been accepted after
event delivery, any only implicitly grab those points that were.
Otherwise, touch points not accepted by a proxied widget hierarchy
will still be part of an accepted event, and be grabbed by the
viewport of the QGraphicsView. This would then lead to infinite
recursion when the QGraphicsProxyWidget passes the TouchUpdate event
on to each touch point's grabber.
Re-activate the test case, and extend it with more combinations.
Refactor touch-event recording to make it easier to test multi-touch
scenarios.
Task-number: QTBUG-45737
Fixes: QTBUG-67819
Pick-to: 6.2
Change-Id: Id5611f4feecb43b9367d9c2c71ad863b117efbcb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some backends were missing support for standalone days and months,
also the standaloneDayName() implementation was always using the
same codepath as dayName().
This patch fixes the issues.
Support for narrow format will be added in the following patch.
Task-number: QTBUG-84877
Pick-to: 6.2
Change-Id: I38ee06342cafab544e3c69097bd0e6ae68e85645
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Counting repaints is unreliable on macOS.
Pick-to: 6.2
Change-Id: Ifa1cf516a2cab94540bea005354d8311a2651d64
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also when closed by destruction, which as of today doesn't call
QWidget::close and therefore also not QWindow::close.
Pick-to: 6.2
Change-Id: I426255e2274eae9262243c769df2264fbaa915b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QDialog today only hides itself during reject and accept, it doesn't
close itself properly. This is problematic, as it doesn't close the
QWindow.
However, fixing this behavior must not result in duplicate calls to
virtual function, or additional calls to virtual functions (such as
closeEvent) without explicitly flagging the change in the changelog.
Add more tests to document existing behavior so that we can identify
such changes and verify the desired side effects.
Pick-to: 6.2
Change-Id: I1f30701cd766eb3c7957751b51e8579d4542dd16
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When showing a messagebox that has already been show we don't want to
keep around the clicked button of the previous invocation.
Pick-to: 6.2
Change-Id: Ib6f6293d40ab338c550ea344094db871ccf45c46
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It was previously calling setlocale(), which makes no difference to
the Unix backend for the system locale, since that's based on
environment variables (that would normally be used to get default
values for the various setlocale() categories, but only the first time
each is asked for). So, on Unix, set the environment variable, too.
It's also necessary to instantiate a QSystemLocale instance
transiently to trigger a refresh of the system locale data.
Pick-to: 6.2
Change-Id: If92e44053f9021e96c814f4b289f4fadaa7027e0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This amends 9a4c98e556.
Change-Id: Ief86d141efa8f87d624c6ba935cb4d9c0b2ead0f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Verify that closing a QWindow using either the close()
API or a close event works as expected, and that the window
can be re-created. Also test QWindows with child windows.
Task-number: QTBUG-46701
Change-Id: I4c12452ff58e1233536c2d6932e72cf924d8ed74
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We want to close the window, end full screen mode on macOS, and free
platform resources. This is all done by QWindow::close. QWindow::close
closes the platform window, triggering a closeEvent to QWidgetWindow,
which then calls QWidgetPrivate::close_helper.
This way, closing a window via QWidget::close, QWindow::close, or
interactively by the user are all equivalent.
The QCloseEvent generated by the widget needs to be spontaneous for
window-system generated events (i.e. the user clicked the close button),
and non-spontaneous if the window closes because of a call to
QWindow::close. To keep track of whether the event originated in an
explicit call to QWindow::close, add a boolean to the QWindowPrivate.
Add a test case that verifies that the window resources is destroyed,
and that events are delivered as they should.
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Fixes: QTBUG-46701
Pick-to: 6.2
Change-Id: Iacb6a2c8d5e880b16b0c8f0c9257ed94bed36f5b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There were several issues with the socket state checking when the pipe
reader is not running:
- the number of object handles in the WaitForMultipleObjectsEx()
call might have been zero;
- a call to the waitForDisconnected(-1) might have hung;
- we did not perform a loop iteration for the waitFor...(0) calls,
so disconnect detection was unreliable.
These issues are related to the same code, so they don't seem to be
addressable separately.
Change-Id: I3bca872bb4191e6a7d38a693d81f7981af7fe145
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
More information about monitor in xrandr 1.5, see
https://keithp.com/blogs/MST-monitors/
Since this change, screen is logical instead of physical.
If xrandr 1.5 and later is installed, Qt screen info will get
from xrandr monitor object instead of xrandr output if only have
1.2 to 1.4.
Users can manipulate monitor as they want, for example, a
combination for two physical screens, half of one screen and etc.
Didn't have chance to access MST monitors, but it should work
if xrandr monitor object was created automatically.
[ChangeLog][xcb] Qt screen info will get from xrandr monitor
object if 1.5 is installed.
Fixes: QTBUG-65457
Change-Id: Iad339cc0d4293b2403b4ef6bf6eb770feb3e685f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This is the kind of loop that the autovectorizer is pretty good
at, but this is really just a type of memchr, so help dumber
compilers and build modes without vectorization.
Drive-up fix the style of the test code.
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a022a35fa24c17
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There's not much context to the URLs being printed, so remove the
message. And suppress the message coming from the MiniHttpServer
Change-Id: Ie2025ac717657ed0f2f0163bd0af22e12a49b30f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The insertions are sorted by when they expire. So, we test the various
orders to insert entries.
Fixes: QTBUG-95959
Change-Id: I1e8d7f4c77dce5eae3d4bfa5101f296c3eea1961
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
After the last row is moved, 0 will be returned when obtaining
row and column data. At this time, QListView::doitemslayout will
not call d->doitemslayout, so the QBspTree data structure will
not be cleaned up, leaving a stale tree structure behind. This
will trigger an assert during paintEvent handling if QListView is
set to IconMode
In QListView::ListMode the test for a valid model index doesn't
use an assert.
Call QListViewPrivate::clear explicitly if the column count is 0
so that the QBspTree and other data structures are cleared.
Add a test case that simulates this scenario by implementing a
model that returns a 0 column count for an index after the model
structure was changed through a move of rows.
Done-with: Volker Hilsheimer
Fixes: QTBUG-95463
Pick-to: 5.15 6.1 6.2
Change-Id: I36419be5459b8ced930c619f538482ea1db4ad03
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We have previously been using the standalong (nominative) month names
both when asked for that and when asked for the plain (genitive) month
name, probably because there was no LCTYPE value for the
latter. However, MS's docs for the standalone values do contain a
comment telling us how to get the genitive names.
Rename the old monthName() to standaloneMonthName() and add a
monthName() that calls GetDateFormat() suitably, as described by the
MS doc.
Pick-to: 6.2 5.15
Fixes: QTBUG-92018
Fixes: QTBUG-86279
Change-Id: I27f63198c3a15b792683f476d2019078b0860f99
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This mimics the effects of test-code delegating checks to other
functions, which can lead to repeated failures. The failing test
should only contribute one to the total of failed tsts. Drive-by:
correct an existing test's reporting of its own name.
Task-number: QTBUG-95661
Change-Id: I370fd2aee378d9fdd35826f0d11677483c60423d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We can't really compare two NaN's. Should use qIsNaN() for that.
Pick-to: 6.2
Change-Id: Ia514cabe65cfcdeafb39cab91ecdb66f8fae725c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace the “size() / devicePixelRatio()” pattern with
a call to deviceIndependentSize().
Change-Id: I9d9359e80b9e6643e7395028cd43e3261d449ae7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The new test is called tst_qurluts46. It verifies QUrl::{to,from}Ace()
functionality using the data from IdnaTestV2.txt supplied by Unicode.
The file was downloaded from
https://www.unicode.org/Public/idna/13.0.0/IdnaTestV2.txt
Task-Id: QTBUG-85371
Change-Id: I4c6a4942ef6018dafc90cb84ef73f6b2614566d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The testcase was disabled with no explanation in
2766322de3 but seems to work fine.
Change-Id: Ibc22a4ffb756604e22c1f2cf1165919c1d7f1212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When linked to OpenSSL, qt.tlsbackend.ossl will log.
Change-Id: I6f0e3c3e6af73b29cff93b8efe39933e5b36d493
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
