Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QFontEngine::cloneWithSize() is used by QRawFont internally when switching
a raw-font from one size to another using setPixelSize. For CoreText, we
use a subclass of QCoreTextFontEngine to keep track of the QByteArray data
of a raw-font, but failed to overload cloneWithSize, so we would lose the
data whenever setPixelSize was called, resulting in missing text rendering
in QtWebKit. We now retain the data as we should.
Task-number: QTBUG-65923
Change-Id: I7d4186a3c32a61d48d1e9388e43f2792e8e46081
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The size of the QStaticText was always adjusted, even if setTextWidth()
was used. Now size of the QStaticText is calculated according to
the set width of the text, and if no width was set, then the
automatically adjusted size is used.
[ChangeLog][QtGui][QStaticText] Fixed explicitly set width not being
respected.
Task-number: QTBUG-65836
Change-Id: If2f9f6952fb168f4bcb6d8fabfdc7360f8a36485
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
After we stopped sanitizing the fallback font list (with change
6ca48a847a), we now need to make
sure it is ordered so that the fonts that support the writing
system in question are always tested first, otherwise we can end up
loading a lot of fonts that will never be used.
Task-number: QTBUG-65605
Change-Id: Id2a65bbff3e64e6d6e6b4f72500778ee3e811e84
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When we request fallback fonts, we cannot discriminate the fonts
based on the writing system support. This is especially important
since common script is now merged with other scripts, meaning that
a common script character will always go through the fallback
mechanism when not supported by the main font. When drawing
for instance a string of Devanagari characters on macOS, we would
get a list of 33 fallback fonts, but almost all of them would be
the default Devanagari font, since none of the other fallbacks
would support that script. Meaning that we would just check the
same font over and over, which makes no sense. The fallback list
has been retrieved specifically for the given script, so we do
not need to consider that when fetching the fonts.
For most of the common set, we will not have noticed the bug,
because at least one of the writing system-specific fallbacks will
have had support for latin characters as well. But when trying to
mix emojis and some non-common script, we would get a box in
place of the emoji, which had been adopted to the main script and
would only be looked for in the fonts supporting this.
Note that this exposed an issue with the QRawFont test on some
systems. When the sample text contained a space, it would
be possible to get a fallback font for this character, since
we now effectively support fallbacks. This is not the correct
behavior, but it is unrelated to this fix, and it was not what
the QRawFont::unsupportedWritingSystem() test was written to
check. I have therefore removed the space from the sample text
to make the test pass, and will make a separate task of fixing
the issue of merging fonts for whitespace characters.
[ChangeLog][QtGui][Text] Fixed a bug where mixing different
writing systems with emojis could lead to missing glyphs.
Task-number: QTBUG-61882
Change-Id: I00f6043bb01af1f2277723ccf643034aebf3e18f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The QTextFormat::FontLetterSpacingType property was added outside
the span of the FirstFontProperty and LastFontProperty, so
the fontDirty flag would not be set when it was changed. There is
no binary compatible way to fix this before Qt 6, so for now, we
add a special case for it.
[ChangeLog][QtGui][Text] Fixed an issue where changing the letter
spacing type of a QTextCharFormat would not cause its font to
update.
Task-number: QTBUG-65345
Change-Id: I5ab53d7f82d529b57edceacfc3fa688c6741cd17
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: C. Boemann <cbo@boemann.dk>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A source of constant confusion is the QFontMetrics::width() function,
which does not return the bounding width of the text, but the advance
width. We deprecate this and add horizontalAdvance() instead, to avoid the
confusion in the future.
Note that there was an internal width() overload which was only there
for the purpose of supporting the Qt::TextBypassShaping flag. This
flag has already been replaced by public API, so no such
overload is added. Instead, we deprecate the TextBypassShaping flag
as well, which makes sense, since a replacement has been made.
Also note that there was a consistency problem with QFontMetrics and
QFontMetricsF, which are supposed to be interchangeable. The
QFontMetrics::width() functions for strings took an optional int length
argument, while the floating point version did not. This error is
corrected in the advance() functions.
[ChangeLog][QtGui][Text] Added QFontMetrics::horizontalAdvance() and
QFontMetricsF::horizontalAdvance() to replace the confusingly named
width() function. The latter has now been deprecated.
Change-Id: I0dfda43aa65c8235be32c62fade82cae05b29c79
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
The blacklisting is not needed anymore as we now use -qt-harfbuzz.
This reverts commit b36e5faad4.
Task-number: QTQAINFRA-1363
Change-Id: I3ae50588204b27e6880416ae2cbc28dda53bb292
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In Qt, we have QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth.
Neither are very good names, since the tab stop is neither a
numerical value as in the former, nor does it have any dimensions
that can be measured, as in the latter. Vertical text advances
may also be supported by Qt at some point in the future, at
which point the name would make even less sense.
At the same time, we expose the actual type of the tab stop
distance as floating point in the QTextEdit and QPlainTextEdit
API instead of always rounding it to an int.
To avoid duplicating either of these APIs in Qt Quick, we
introduce tabStopDistance as the common term instead and deprecate
the old names.
[ChangeLog][Text] Introduced tabStopDistance property in
QTextOption, QTextEdit and QPlainTextEdit as replacement for
the inconsistently named tabStop and tabStopWidth properties.
QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth have subsequently been deprecated.
Change-Id: Ib7e01387910cddb58adaaaadcd56c0e69edc4bc2
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In the past, we had an undocumented text flag that worked with
one of the QPainter::drawText() overloads. This was never intended
as public API and served a specific cause in Qt WebKit at one point.
But there is a general need for such API, as disabling shaping features
easily gives 25% performance improvement on text rendering even for
fairly short strings.
This patch adds a new style strategy flag to disable shaping and
will just uses the CMAP and HDMX tables to get glyph indices and advances
for the characters. In Qt 6, the TextBypassShaping flag can be removed
completely and be replaced by the style strategy.
[ChangeLog][QtGui][Text] Added QFont::PreferNoShaping style strategy to support
improvements to performance at the expense of some cosmetic font features.
Task-number: QTBUG-56728
Change-Id: I48e025dcc06afe02824bf5b5011702a7e0036f6d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Similar on how it is done for Windows desktop we also use the given
style hint when building the list of fallbacks a font family.
Change-Id: I71378581d07f20ebe5bf0bc757bba919cc70e118
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
CSS style such as "line-height: 1.5;" should be used as a multiplier,
but Qt uses it as percentage which makes line spacing way too small. To
workaround this, convert it to percent and use as
QTextBlockFormat::ProportionalHeight instead.
[ChangeLog][QtGui][Important Behvior Changes] Changed CSS line-height
property with multiplier to follow CSS spec
Task-number: QTBUG-56848
Task-number: QTCREATORBUG-17683
Change-Id: Icc98f7c0d4d07542a220702c287f23fa450ef875
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
<div>1<br/></div>2 was inserting two newlines between 1 and 2, while all
tested web browsers only insert one newline - as long as there is nothing
between the <br/> and the </div>.
This was the cause for extra newlines being inserted in KMail when
replying to HTML emails, such as those generated by gmail.
Change-Id: I5145d977701e68913264357bba22780e7cdd3f7d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
operator=, which was only used for clearing, wasn't clearing the hash.
This led to a mismatch between the vector and the hash (given that the hash
points into the vector).
Spotted by interrupting kmail in gdb, and it was in this code
iterating over a 2000 entries hash (the first vector entries not matching
the hash, this code keep appending new entries for the same formats).
This fixes QTBUG-8862 again, the initial fix having been accidentally
reverted in 467b15a.
Change-Id: Ia34b3d002a0199e1930431a4bbdb2ec981ed4ffc
Task-number: QTBUG-8862
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When calculating the width of a text for drawing decorations on top,
we use the effective advance of the whole text after it has been
through the shaper.
However, in the case of QStaticText and QGlyphRun, there is shortcut:
Since we only have the glyph indexes and position of each glyph,
we use the position + advance of the right-most glyph to find the
right-most edge of the decoration. For this, however, we use the
advance of the glyph *out of context* of the rest of the string,
because the whole idea is to avoid doing the shaping of the string
with every draw call. In some rare cases, the advance of the
right-most character, in the context of the string, is different
from the advance of the standalone glyph.
Now, one way of fixing this would be to store the width of the
text in QStaticText and QGlyphRun, but since it is a very rare
artifact which is barely visible, I have opted to just work around
it in the test instead, the workaround being to force integer
metrics so that we don't get the small 0.2 pixel error.
Task-number: QTBUG-55217
Change-Id: I8d16d52f2ef27275cabb7d3865aeeaa31617ba3d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Recent HB changed the way of handling ZWJ/ZWNJ to be more in par
with other engines.
Change-Id: I8abacd195e4b247c8fa6d91ef1086e74da0a1efb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The QFontMetricsF version of the test should not truncate the
returned values, as the results may then be wrong.
Change-Id: I17f97f846bb723709e695e8866e437d6888d275b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OpenSUSE has a bitmap font called "Waree" while the test
is created for the TrueType font which is available on Ubuntu.
The style names are different, so we can use that to check
that we have the right one.
Change-Id: I808d0d1ecde9f10ed7730dc76ab3818490002ba9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Amends 7896ae052a. The previous change
focused only on ZWJ and ZWNJ, but there are many other formatting characters
that we need to support and that may be rejected by the German keyboard-hack.
This opens up for all characters in the Other_Format category.
Task-number: QTBUG-58364
Change-Id: Idd967a9ae5b12060c851f6030b7e019508561696
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The style name needs to be cleared if not present in the string,
otherwise the style name from qApp->font() (which propagates to
any default-constructed QFont) remains.
Change-Id: I9b6522a39a38526cced8a11ed02ae32582026480
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
The test failed if qApp->font() had a styleName() set,
when testing old serialization formats which didn't serialize it.
Change-Id: If0236d354be144b3a990e074a22f796fffb1ed18
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Private Use Area characters are quite valid input characters when used
in combination with a custom font. Joiners also serve an important language
purpose in semitic writing systems.
Note that there is a hack where we disregard any character produced
using CTRL or CTRL+SHIFT specifically because of German keyboards. I have chosen to
keep the hack in this patch to limit the change (though I have made an exception
for ZWJ and ZWNJ since both are produced using Ctrl+Shift on Windows), but it
will probably have to be reverted.
[ChangeLog][QtWidgets][Input] Accept characters in Private Use Area, as well as
zero-width joiners and zero-width non-joiners in input in QLineEdit and QTextEdit.
Task-number: QTBUG-42074
Task-number: QTBUG-57003
Change-Id: I73f3b7d587a8670de24e902dc52a51f7721dba5a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Commit 2bc7a40048 taught the CoreText font database to populate the
families lazily, and in the process added a guard to ensure that we
didn't populate internal fonts (prefixed with a '.'), as these fonts
would then show up in font selection dialogs.
Commit 909d3f5c7 then added support for private fonts, by making it
possible to filter out any private fonts from font selection daialogs.
But the guard was not removed, so we were still not populating these
fonts. This guard has been removed, and the filtering function has
been updated to include the conditions of the guard.
Next, commit e5e93345c5 used [UIFont fontNamesForFamilyName:] to verify
that each family that we registered with the font database would also
have matching fonts when finally populated. This is not the right approach,
as [UIFont fontNamesForFamilyName:] does not handle internal fonts.
Instead we trust what CTFontDescriptorCreateMatchingFontDescriptors()
gives us, but make sure to register the resulting font descriptors
with the original/originating font family, instead of the one we pull
out of the font descriptor.
Finally, as of iOS 10, we can use CTFontManagerCopyAvailableFontFamilyNames
instead of [UIFont familyNames], which gives us all of the internal font
families like on macOS, instead of just the user-visible families. For
earlier iOS versions we manually add '.PhoneFallback', as we know it
will be available even if not listed in [UIFont familyNames].
The end result is that we register and populate families like '.PhoneFallback',
which is critical to supporting more esoteric writing systems.
The check in tst_QFont that styles for a given family is not empty has
been removed, as we can't guarantee that on all platforms, which is
also documented for QFontDatabase::styles().
Task-number: QTBUG-45746
Task-number: QTBUG-50624
Change-Id: I04674dcb2bb36b4cdf5646d540c35727ff3daaad
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
