Some QtQuick autotests, that apparently generate incomplete touch
sequences and delete windows without finishing them, triggered a crash
when handling the TouchCancel event in QGuiApplication.
Change-Id: Ie725d5a16f55acc40bdc8e2c38f93daac9477f2a
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Do not try to load any input method when QT_IM_MODULE is set to "none".
Change-Id: I695cb76d616bb2ce5021979bae2790b2f286122d
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Qt requires this since 482d96a0c5
Change-Id: Iba783e283b17654abf46f11b81cc1641c3ce7d83
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Earlier, if we asked for say 16 and the implementation only handled 4,
we defaulted to 0 (no antialiasing). Now, we instead try a
progressively lower number until we find a match.
Task-number: QTBUG-22669
Change-Id: I3d89f2a302f9c6195e2d43827006fd015d981ce7
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Earlier, if we asked for say 16 and the implementation only handled 4,
we defaulted to 0 (no antialiasing). Now, we instead try a progressively
lower number until we find a match.
Task-number: QTBUG-22669
Change-Id: I63f4b8aadf8e06713d19fdc9b9d73672162c816a
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Simply include the generic arm-gnueabi configuration. This should work
from within and outside sbox, but at the same time keeping this mkspec
allows us to enable Harmattan specific features such as the xinput2/touch
support in the xcb back-end.
Change-Id: I5cc0cdc3e222deb6374580392c3e3aadfc3a4bd9
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Do that by keeping the QWeakPointer that track QObject independent of
the ones that track QSharedPointer.
QSharedPointer do not touch the sharedRefCount in QObjectPrivate anymore
When converting a QWeakPointer constructed from a QObject to a
QSharedPointer, it will display a warning saying one should not do that.
Task-number: QTBUG-22622
Change-Id: I3595e3e7401702410776c458687ab357ad9366ab
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes the compilation for Windows CE.
Include Windock2.h before Windows.h.
Change-Id: Iae1ab98239bb75b59c78460e0c0e48dfa1326032
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
-O2 triggers an optimizer bug where compiling unixmake*.cpp would take
several minutes each. -O1 is not measurably slower, so use that instead.
Change-Id: Ibf8abbecdd69e35cef800841f781543121168f76
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Add QEventLoop::ProcessEventsFlags test data for
tst_QEventDispatcher::sendPostedEvents() to test that posted events are
sent when waiting for events and when not waiting.
Change-Id: I99f9eb121d0b1ded725e19c5233922fc0a6b81e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This will test the event dispatcher in corelib for proper timer and
posted event handling. The test makes sure all of the necessary virtual
functions are implemented and working as expected.
This test doesn't test socket notifiers or Win32 event notifiers, as
these are already covered in existing tests.
Change-Id: I5540ffc4e6d7f97bcd6c3725d7e74c0ab9c97015
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Next step is to remove navigate(), but that has to be done in
qtdeclarative first.
Change-Id: I01ea1386c092446be04cc19d0f70adf53f094adc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is now an implementation to qt_pixmapFromWinHICON.
So use it for Windows CE too.
Change-Id: Ie2f3cacd4be9209e33d49e53703c5abc95d98d09
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qt_pixmapFromWinHICON is used by qfileiconprovider
and qwindowsstyle. So use this one from Qt 4.8.
Also put functions of qguifunctions_wince in here,
because this was splitted.
Change-Id: I00ffb9d66a84884f7338648982e516ca016b9bd6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
There are leftovers from Qt 4.8 in regards of the
qguifunctions_wince. The parts which where needed
in widgets have been taken over into qwidgetsfunctions_wince.
Change-Id: I737684a7f56ba356df89c1be77ab776bca034ae9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
SVG support is now handled in QtSvg. Previously this test code would
normally be skipped when testing qtbase. This code is only executed
when testing qt5 with QtSvg enabled. This code will be moved to QtSvg.
Task-number: QTBUG-22360
Change-Id: I7372012469f9c0f9b7d3851a0ae696f8f935ba10
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed unload_after_implicit_load() to use full path
- Turned off app_bundle
Change-Id: Ibdf3ae0dc833d97eba64298715eb88c70408fff6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Only run invalidConstructs() tests if not cross compiled
Change-Id: If99fccdf9bca339507ca60c49aa89dc35c535d3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
This class completely changed,
the old docs were still around.
Change-Id: Ice7b106b33ffc60f45f7af1b4f44dc01462ee0da
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This patch do the following things:
1) Call QFontDatabasePrivate::free() to clean up font database before
destroying the platform integration object. This is to prevent object leak
which is allocated by platform plugin.
2) Allocate FontFile structure for each font registered in windows
platform to prevent double free of FontFile structure.
3) qt_registerFont() will release the old handle of the registered font
and replace it with the new handle. This is to prevent FontFont structure
leak.
Change-Id: Ib5ca20c695e1e365689fd8554f7caff6ee77a0b1
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This fixes a minor bug in VisualIndex triggered when calling
resizeSection with size 0 (but not hideSection).
It is mostly cosmetics - however hopefully there will soon
be a minor refactoring and there is really no need to make
strange code to keep a semantic bug.
However it is also doubtful to make a semantic change
while refactoring.
Change-Id: Ide153e421fd7a634062cb74867f4a49da4bf9cd6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Windows CE has no printing support, so we
can disable this.
Change-Id: I0ec83dff2d045de56d613cd676e9eb290145bf41
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
it doesn't serve any puropse (any more?) and it breaks the mingw build.
Change-Id: I02a5e7502586e7e9f5956991498ff602eff66e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this brings some clarity which combinations are actually possible, which
allows for some optimization later on.
Change-Id: I930027e426c5f9abea8d21eb1ebaa39bd29787b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
This was spotted by RIM static code checking team. seqDumpPos is a dummy
variable which is only used on sequential mode. It is used as a
simultaneous storage area of both pPos and pDevicePos when in sequential mode,
to keep both in sync. They just suggested that it would be a good practice to
initialize the variable, since it does not have any side effect, and there's
not much value on not doing it.
Change-Id: I8138729eb31df5779c91b368c2cfaecd39788f29
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
So that fallback fonts can pickup the weight/style requested instead
of using the weight and style of the primary font.
Change-Id: Ia592e079cad61334f21e0453412b198a900bb6b6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
It can happen that there is a window covering all the screen but it is shaped
to only take part of the screen. If that happens, besides the condition of
QRect(attr.x,attr.y,attr.width,attr.height).contains(pos)
we also need to query the server for its region rectangles and make
sure the cursor is inside one of those rectangles. If that does not happen
we have to return 0 so the hierarchical xcb_query_tree_children xcb_query_tree_childrenntinues
Change-Id: I67327672e3d854d064190b55a07bd56ade4dfddb
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
