This reverts commit aa1b4c0943.
It turns out that the bug is caused by a different mask constant
in Windows 8 which should not take effect in pre-Windows 8.
Change-Id: I1ad502262dae42856c07d48ee3bc9dc032ab379b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The first word of the .name variable of each extra compiler is
used as a key in a container that keeps track of them. See also:
qmake/generators/win32/msvc_objectmodel.cpp: VCProjectSingleConfig::filterForExtraCompiler
qmake/generators/win32/msvc_vcproj.cpp: VcprojGenerators::initExtraCompilerOutputs
Task-number: QTBUG-32912
Change-Id: I7ea5c58884db559621f50740075b7f2e4e3ef7f8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since it's possible to call the function on an
empty model, return failure in that case.
Change-Id: I0a0eabe917da3e6294bdd616a85579f6dc894ec8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
XI2 sends events for individual touch points, but QTouchEvent
sends all of them with a stationary state if they didn't change.
If a touch pressed event is received, and the next XI2 event
is about a different touch point, we wouldn't update the state
of the previously pressed touch point.
Change-Id: I1ebcbea1cea54872064ef7710e2aac7b0b41cd70
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
C99 defines the "I" macro in complex.h. qobjectdefs_impl.h can be
indirectly included in user code, which raises the possibility of a name
clash if the user's compiler supports C99 and the user includes
complex.h
Change-Id: Ie79ec7baf2d49a34b66a01556c7e57324303dc04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests use local coordinates, but window->geometry() gives the
global position on the window, i.e. offset by the size of the
decoration.
Change-Id: Id63ffd7e160b77ddb0f5563d8c3c65c36ad45e89
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
After change 4dbf574b7a touch worked
only if XI2_DEBUG is turned on. That is because it creates the
QTouchDevice and calls QWindowSystemInterface::registerTouchDevice,
which must be done at startup so we can receive events.
Change-Id: I9446d72bc702fbd819bf26bcdc2a3d657180f642
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We don't use exceptions anyway, so we can safely ignore this warning.
Task-number: QTBUG-32833
Change-Id: Id78cb99770f37a076de3a95721ba40795a8a7b57
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
With a _NET_WM_PING message, a window manager can check if an
application still works or if it froze. The WM sends such a message to
the application window and the application sends the message back to the
root window.
Since change Ia04268b0 / commit d8090022f "Move the X11 system tray code
from widgets into XCB-plugin.", Qt selects StructureNotifyMask on the
root window. Due to this, we now also receive replies to _NET_WM_PING
and treat them like a _NET_WM_PING request.
This caused an endless loop as soon as any _NET_WM_PING was seen where
Qt would send a _NET_WM_PING to itself and handle it again and again.
Fix this by ignoring _NET_WM_PING messages that are sent to the root
window. According to EWMH, such messages can only be replies to
_NET_WM_PING and GTK does this, too.
Task-number: QTBUG-32957
Change-Id: I1b0aa682f99b17d633baacc14b18b3adca7a1aba
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
In our benchmarks this makes removeLast more than twice as fast.
(That is on my core I7 laptop with gcc on linux).
It changes the alloc test to be an assert rather than an if.
Change-Id: Id55195b9b7880e54a89be4dd9d6228d94aff23c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We kept using qInstallMsgHandler in testlib to not break test cases using
it too. However, this breaks tests using qInstallMessageHandler ...
ChangeLog: QTestLib: Test cases have to use qInstallMessageHandler instead
of the (deprecated) qInstallMsgHandler
Task-number: QTBUG-32391
Change-Id: I3bd95d9b0a48749243a5dd3e074df8ebcbc07dce
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This patch fixes the warning uncoverd by the -Xlint:unchecked option
by parametrising the generics with wildcards.
src/org/qtproject/qt5/android/QtActivityDelegate.java:315:
warning: [unchecked] unchecked call to getMethod(String,Class<?>...) as a member of the raw type Class
Method m = initClass.getMethod("setActivity", Activity.class, Object.class);
Change-Id: I665e9dfd6d64c92a491d68c838ad02bde275d604
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Though the worst case memory usage was improved in
b800d8b94a the best case usage changed.
Since best case is the same as worst case in Qt5, we should
use as little as possible, which this patch ensures.
We reduce the memory usage from 3 to 2 ints per section - which is
half of worst case in Qt4. There seems to be no bigger cost in
performance doing that. The recalcSectionStartPos is still very fast.
This patch limits the maximum section size to (2^20) ~ 1.000.000 pixels.
This alleviates
Task-number: QTBUG-32325
Change-Id: I9b7530030a31b4e35cf1ca9e32c6b936f5ea9790
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QFontEngineMulti::stringToCMap() stores the fallback engine index
in a glyph index'es high byte, which means the maximum fallback engine index
it can store is 255, so limit the number of tries we're doing to this value.
Otherwise we could end up with `fontEngineMulti->engine(glyph >> 24) == 0`
after successful stringToCMap() call.
Task-number: QTBUG-30412
Change-Id: I06907a39186fd207f3ce4b732a1a54e615744082
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Windows configure does not have -device-option yet.
A hack for android already generated the
qdevice.pri. But it did this even if no android
was build, so merged the device-option with the
android generation of qdevice.pri. The qdevice.pri
is generated earlier in the configure steps than
before to match the linux configure and allow
to set device options before the config.tests
are run.
Change-Id: I753cf0d5eba1479792a685d6e1f5acb38b970893
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in scanning any of it.
qdoc already excludes itself (and will hopefully move out of qtbase
soon), so not adding it here.
Change-Id: I84356c0988be386de331bb7879b3ebd2108526a2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
under normal circumstances, any errors will be noticed already by the
pkg-config --exists call, which is silent anyway. therefore this doesn't
change anything in normal qmake usage.
however, lupdate's and creator's evaluators skip the --exists calls and
subsequently invoke the normal query, which then prints useless noise to
the terminal.
Task-number: QTBUG-28159
Change-Id: I536412060f3830aafeb0587f855cd6af11227bca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
whatever it was used for is long gone.
Change-Id: Ifab7ae7968b1ab65982b1a6414274b3502bbc3d0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Optimize the parser of the X11 compose tables. Parsing these was
responsible for over 90% of the startup time in Qt 5.1.
Change-Id: Ifddc3f30828791e51a755f92791c26ffe43a9cd3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Windows CE 5 and the depending Windows Mobile
is not supported.
Change-Id: I81b9599f837590a1375b6340e58c47b478c079ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Sections may be hidden => QStyleOptionHeader::position must reflect the
state seen on the screen. Otherwise styles will give wrong visual
results.
Task-number: QTBUG-32203
Change-Id: I7ef86496be092bf6f52ec45f757b501f38c3a431
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
To avoid using modifier keys when releasing a two-finger
mouse wheel flick on a trackpad, we listen to event
phases. But for a normal mouse, a separate phase
NSEventPhaseNone is given. Ensure that we still send
modifier keys when that state is reported.
Task-number: QTBUG-32098
Change-Id: Ib840dd661b7842ae49127e5a8d42e3666ae2da4e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Change QNSView convertFromEvent: toWindowPoint: andScreenPoint:
arguments from QPoint to QPointF.
QWindowSystemInterface event handlers already use QPointF and
QPointF is needed for tablet support
(https://codereview.qt-project.org/#change,62740).
Change-Id: I6e5b2f19777fe24ae34e9e85028772e4be0a94f6
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A QWindow should keep its title after removing and restoring the
frame, so set it if we are setting window flags that include a frame.
Task-number: QTBUG-32978
Change-Id: I0fe1b651eac05a210b06ec4f7f6fb78f2536834d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
