The check to disable the test was the one for QRegExp. This patch fixes
that.
Change-Id: I8783f582998cdd6ffe5dc5dafb3d53d56cd91213
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ibbd161700bf9e75736652b99dfa1ffd47e584249
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ie89641601763ff41eee5356a4b5ddee7ef810fbc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This patch adds the missing tests for the QRegularExpression class to
the QDataStream tests. Only QRegExp was tested until now.
Task-number: QTBUG-72587
Change-Id: I68ad1500ecbb041bbc6fbdff04b99171530cc0fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not removing QT_EMULATED_ALIGNOF logic from qglobal.h at this point, as
it might be used elsewhere.
Change-Id: Ie78922bb604a54aed03ab5b88e31a7f29a3a4de0
Fixes: QTBUG-73561
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without this, a local build of this test on macOS fails.
Change-Id: Ie03fa47ff0a54db752af47f223fbe5724cd9c976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code made two incorrect assumptions: that the strings used are "AM"
or "PM", or would be translated. Instead, the locale provides the
correct strings, and there is no need to translate. However, in order
not to break existing translations, we give those preference.
And that the AM/PM string is not longer than 4 characters, while in
e.g Spanish/Columbia locale the strings are "A. M." and "P. M.", ie 5
characters long. Also, the use of qMin in a function that is asked to
provide the maximum section length is wrong.
[ChangeLog][QWidgets][QDateTimeEdit] Use the information provided by
the locale to determine the AM/PM strings, unless they are already
translated.
Change-Id: I6d1b05376e5ac62fc58da2cdea2e6cb732ec6747
Fixes: QTBUG-72833
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit e79b1dcdf5)
Reviewed-by: Simo Fält <simo.falt@qt.io>
(cherry picked from commit d53b8b77bc)
Change-Id: I2f6ffb8e0a9b4d591edb6925e48baffcefc14511
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If this callback is not set then OpenSSL will call the callback
used for <= TLS 1.2 unconditionally when connecting. If using PSK it
will call it again later once the preshared key is needed.
We don't currently handle the TLSv1.3 PSK, but we definitely should.
But for now we can work around it - when psk_use_session_callback is
called we simply change the PSK callback to a dummy function whose only
purpose is to restore the old callback.
This is mostly done to keep behavior the same as it is now for users
(and to keep our tests running).
Later we can add a new signal and handle this new feature properly.
Reviewed-by: Simo Fält <simo.falt@qt.io>
(cherry picked from commit d8efc8d718)
Task-number: QTBUG-67463
Change-Id: I4aca4ae73ec4be7c4f82a85e8864de103f35a834
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to re-write our verification callback so that
it does not need locking/does not block the main and 'http'
threads as a result. But such change is too dangerous for
5.13.0 so we instead have a somewhat handicapped/reduced
test on Windows.
The fixed QSSlSocket will go into 5.13.
Task-number: QTBUG-76157
Change-Id: Ia54701bcb3f6f079a69e52c8904ac3efcee4a787
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtCore][QTextBoundaryFinder] Sentence breaking now
no longer breaks between uppercase letters and comma.
This is a deviation from the Unicode specification,
but produces less surprising behavior.
Fixes: QTBUG-75857
Change-Id: If1e78b3be3f20250d01100353ea7da6110985f82
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QT_DEPRECATED_X() was not added with
d6d33f0b80 for the deprecated
QComboBox functions - Add them now.
Change-Id: I8d4ea08766ae6ff052dfccac6c3f35ecf34affb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Never for global inputs
- Otherwise only if the temporary is referenced more than once
-> meaning it's actually caching the result of some operation
Tests updated accordingly.
Change-Id: Ic76615370d23dee3965ca6350d5257a8be5a3e22
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The file system appears to cache too aggressively, so if the reported
storage size doesn't change after flushing to disk, ignore the failure.
Change-Id: Iba7dce79591447fac296bfe92c2dc993d36d0c2a
Fixes: QTBUG-69868
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't go into an infinite loop breaking pages, when an image is about
as large as the page. Correctly take top and bottom margins into account
when calculating whether the image could fit on one page.
Amends change 416b4cf685.
Fixes: QTBUG-73730
Change-Id: Id311ddf05510be3b1d131702f4e17025a9861e58
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The full stroker does not produce good results for aliased lines
thinner than 1 pixel. Avoid it by making sure that such thin lines
are painted by the cosmetic stroker, even when they have
non-uniform transformation.
Fixes: QTBUG-73866
Change-Id: I7b5f0fa555903246e0c3fd92cd435cc8c0b15a24
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QDateTime's short names setUtcOffset() and utcOffset() have been
deprecated since 5.2, in favor of setOffsetFromUtc() and
offsetFromUtc().
QDate's shortDayName() and shortMOnthName() have been deprecated since
5.10, in favor of QLocale's dayName() and monthName(). Also, the
tests that were using them are testing methods only present when the
datestring feature is enabled; so condition them on that feature.
Change-Id: Ibfd4b132523ca8fbc1cb163353a44e0500877fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression introduced by 63967313f5 which blocked signals
on the view, but not on the model.
Change-Id: Ib2f93fe6ef842264aaba200c98ee4a19065ca220
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Laurent Montel <laurent.montel@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
If columns are removed and we get notified via layoutChanged, the code
tries to restore old section sizes, and went out of bounds, leading to
an assert in QVector. Simply add an if() to skip restoring out-of-bounds columns.
This comes from https://bugs.kde.org/show_bug.cgi?id=395181,
which translates into the unittest that is part of this commit.
Change-Id: Ide42176a758f87b21957c40508127d67f1d5a2d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
[ChangeLog][QtCore][QMetaObject] Non-copyable lambdas can now be used
with invokeMethod(). For consistency reasons, the functor object is
now always moved.
Fixes: QTBUG-69683
Change-Id: I66ff5e21d6d1926f0f7c5f8c304bed1a90b69917
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When re-parenting, some widgets change their children. For example
QLabel, when set to rich text, will not update, until receiving a polish
call, at which time getting a list of all children recursively and then
trying to call functions on them will crash, since the children change
in the middle of this operation.
Fixes: QTBUG-69204
Fixes: QTBUG-74667
Change-Id: I95dd83ebeed14c017e22552ddd47658ae8a09353
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
If the start position of a backward string search was the at the start
of a paragraph, the code would start searching at an illegal position
(at the eol character) in the preceding paragraph. That caused
that whole paragraph to be skipped, so any matches there
would not be found. Fix by making sure the search starts at legal
position.
Fixes: QTBUG-48035
Change-Id: Id6c0159b6613ec75ec617a0a57096ceef2b4cbd0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
- Use nullptr
- Fix warning about inconsistent parameter naming in CsvCompleter::pathFromIndex()
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Use initializer lists
- Fix the class declarations, use override, member initializations
- Remove goto, streamline code
- Use auto to avoid repeating the type
- Introduce std::unique_ptr
Task-number: QTBUG-38014
Change-Id: Ia8ecd799064d630648b385b606848d7474c51363
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is needed for cases where we use e.g. "file:///test.html?query#Fragment".
The fragment and query were already preserved for the qrc scheme. This
fixes it for the file scheme.
Change-Id: I5713e4a25372fdd55ac255b1c6228b4dea419244
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use the comparison helpers to do fuzzy checking of geometries.
Change-Id: I00f4403f3bca2e8a3996e938a85ba799e083058c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use QTRY_COMPARE to fix recent fails like
FAIL! : tst_QGraphicsView::cursor2() Compared values are not the same
Actual (view.viewport()->cursor().shape()): IBeamCursor
Expected (Qt::SizeAllCursor) : SizeAllCursor
Task-number: QTBUG-76259
Change-Id: Ie9d4bbe45a3be6064ec88ee237360beb92a61481
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It's really failing only on Windows 10 it seems.
Task-number: QTBUG-76259
Change-Id: Ieb541dc994a17e82478a5cc2643e0a89fd5aa97d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
NoDefaultConstructorRef1 was taking a reference of the input, which
meant in the first test it would get a reference to the temporary
created by the 1 literal. A temporary that would be out of scope by
the time we check its value.
Instead add a test with unique_ptr to test we can pass movable
temporaries.
Change-Id: I6b02377dfe30c82b6e71bfb3353a81ad81558ed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt5_add_big_resources is only available if using CMake 3.9 and later.
This amends cdccd0222b.
Task-number: QTBUG-55680
Task-number: QTBUG-75806
Change-Id: Ibba7af6ee7edfb226368937d543b7ec5cc93eb16
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
- Move the fuzz check introduced by
6309062722 to a shared header for
reuse. Use it in in more places to account for rounding errors
introduced by odd window frame sizes when scaling is active.
- Use the test widget size to ensure windows do not violate the
minimum decorated window size on Windows when scaling is inactive
on large monitors.
Task-number: QTBUG-46615
Change-Id: Icf803a4bc2c275eadb8f98e60b08e39b2ebebedd
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It should have been qfloat16(1)/qfloat16(infinity) in any case.
Sadly, that behaves no better than qfloat16(1.f/qfloat16(infinity)),
which was promoting the infinity back to float. So retain the check
for over-optimization (but make the comment more accurate).
This is a follow-up to d441f6bba7.
Change-Id: Iec4afe4b04081b0ebfbf98058da606dc3ade07f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... spotted with the brand-new checks for that in QCharRef.
The rx[i] == ~~~ check is clearly wrong, as rx is the regexp
we're building and `i` was not supposed to index into it.
The intended meaning was wc[i] == ~~~, testing if we were seeing
the closing bracket of a character set. We need to check for
that immediately for dealing with the special syntax of []...] where
the ] belongs to the character set (it can't be the closing one
as character sets cannot be empty).
Fix and add a regression test. Bonus: this code was almost
unchanged since 2009.
Change-Id: I958cd87fc25558e9d202d18b3dd4a35d0db16d8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <hjk@qt.io>
The value of NColorRoles got changed since 5.11. It introduced one more
role called "PlaceholderText" in the ColorRole enumeration.
When using QDataStream (5.12) to read QPalette objects from a file
written by 5.9 (<5.11), the processing results are inconsistent.
Fixes: QTBUG-74885
Change-Id: I14d57f9603a26e5890b4fd57c7e464c5b38eb3f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Fix some ui glitches for QAbstractSpinBox:
- update geometry when buttons are toggled on/off
- calc button size with subControlRect instead hardcoded 20px
- when buttons are not shown, don't add the button size in
sizeFromContents for common and macOS style
Fixes: QTBUG-39713
Fixes: QTBUG-75303
Task-number: QTBUG-67126
Change-Id: Ibf330c76deb16358a481bba6bd429fff6a5d57ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QScopedPointer uses normal delete, but we need delete[].
Change-Id: Id62a2c55f75ef4aa60580f5e04c4bf306a6dd3c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such files do not exist (as per QFileInfo::exists), but on some
platforms that rely on realpath(), QFileInfo::canonicalFilePath did
not return the empty string.
Use the same logic on macOS as we already did on Android, and include
a test case. Remove the unnecessary dynamic memory allocation and
use a stack-allocated array instead, unless we use modern POSIX in
which case realpath() will alloc the memory for the result for us.
Change-Id: Ide987c68ebf00cbb7b1a66c2e9245a12c7807128
Fixes: QTBUG-44242
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's not clear why this test fails - and only does so sometimes - but
fail it does, so we ned to skip it to let development keep going. As
it happens, the same platform over-optimizes various computations
using qfloat16; which can at least be used to test for this platform,
since it wrongly distinguishes two qfloat16 values that theory and all
other platfomrs agree should coincide.
Fixes: QTBUG-75812
Change-Id: Ie9463d7dc21bca679337b475d13417b9f42bbf9b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add support for surrogate code points U+D800 through U+DFFF,
represent them with JSON escape sequences.
https://github.com/tc39/proposal-well-formed-stringify
Change-Id: I84fea53a8ef400beebefdba10ea82dc510fe7dda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is failing in 5.13 for unknown reasons.
Task-number: QTBUG-72296
Task-number: QTBUG-72344
Change-Id: I24c1ad1b6def3096de99caeeebeee6e204cc75ca
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
If the deadline is far in the future, the conversions to nanoseconds
or internal arithmetic may overflow and give an invalid object, thus
the deadline may end up in the past. Added a test to the testlib
selftest for sleep.
[ChangeLog][QtCore][QDeadlineTimer] Fixed integer overflows
leading to immediate timeouts.
Task-number: QTBUG-69750
Change-Id: I9814eccdf9f9b3add9ca66ec3e27e10cd5ad54a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The window tends to grow to span screens in multi-screen setups; force it to
be on the primary screen by showing it maximized in that case.
Change-Id: I984ba7a4cd4abd1f862c59c8dca0e2275f44c724
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Use nullptr
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax where possible
- Ensure top level widget list is empty after each test, delete left-over
menu bars and disable menu animations
Change-Id: Ieeb943ea669cd139f1835088b816802e777a9676
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use a fuzz check (cf 6309062722) and a minimum
size similar to tst_qwidget to make the test pass on large monitors with or
without active scaling.
Change-Id: I5a9e28e38e1d007057894c349c94f0e6fe12009c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Use nullptr
- Fix C-style casts
- Fix redundant bool expressions
- Fix else after return
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax
- Remove unused variables
- Streamline code in some cases
Change-Id: I1350b382b0b7d0f3198039fdc78892cfa1dd498d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Use nullptr
- Fix C-style casts
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Streamline code in some cases
Change-Id: I4c9b99126cff02136def0e03accdf1129fe6d72b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Use nullptr
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax; use lambdas where applicable
to remove helper slots
- Streamline code in some cases
- Replace helper function to convert touch points by the one in
QWindowSystemInterfacePrivate
- Use a logging category for the debug outpt, silencing some output
Change-Id: Ia46c7ad7c08f3afc8e5869ea99b66e406de97781
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Note that the test is still disabled, but this is needed in any case.
Change-Id: Ib7523ba800b94c32690c1bd09b23fc2078c71d4e
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have been rather sloppy in how read-only versus editable is handled.
According to the definition, editable signifies that in principle a
widget allows the user to change its text. Read-only means that this
ability is (currently) disabled.
Task-number: QTBUG-75002
Change-Id: I5d71843abcdaac52f4a60a1abcac2604341f6c96
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The formatting of times in Norwegian has reverted to using dots in
place of colons, as it did before v31 (commit 82deb0ad1), so reverted
the tests to their state before that.
Change-Id: I8a09ce253731bb0f0f3caca117f06ad568940a81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also de-duplicate the "monospace" string in qgenericunixthemes.cpp,
and add tst_QFontDatabase::systemFixedFont() to verify that
QFontDatabase::systemFont(QFontDatabase::FixedFont) really returns
a monospace font across platforms. Replace commented-out qDebug()s
with qt.text.font.match and qt.text.font.db logging categories to
troubleshoot when the test fails (among other uses). Add qt.qpa.fonts
logging category to unix themes to show default system and fixed fonts
(font engines on other platforms are already using this category).
Fixes: QTBUG-54623
Change-Id: I2aa62b8c783d9ddb591a5e06e8df85c4af5bcb0c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Up until now, the QShaderGenerator would create temporary variables
for uniform, attributes, const. This change makes it use the global
inputs directly rather than relying on the intermediate properties.
Change-Id: Ia9497367d61e536969fe87536606f309c286dbb2
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
GL2/ES2 expect it to be attribute and not in like later versions of OpenGL.
Task-number: QTBUG-74829
Change-Id: Iddd22386ed315d6e6843d8225e49a4b73b6ad9ba
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Without this change, the target of a symbolic link that points to a UNC
share would include UNC in the target path, and not be correctly made
absolute.
Add a relevant test case, and use the opportunity to factor out the
helper code that creates NTFS symlinks into a function that takes
care of error handling.
The file created with the new test case only gets cleaned up correctly
when passing the file path into QDir::rmdir, which is either way the
right thing to do.
[ChangeLog][QtCore][QFileInfo] Fixed resolving of symbolic links to UNC
shares on NTFS file systems.
Change-Id: I9ba75d627aedf7c4cc289f0cb71088d795d30d8a
Fixes: QTBUG-73688
Task-number: QTBUG-63970
Task-number: QTBUG-30401
Task-number: QTBUG-20791
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaObject::newInstance returns a QObject, thus it's not possible to
create a new instance of a Q_GADGET using this function. Previously, we
returned a non-null QObject pointer for such scenarios, which then
leads to crashes when one tries to use it. Now, we check whether the
meta object inherits QObject's meta object, and error out early
otherwise.
Change-Id: I7b1fb6c8d48b3e98161894be2f281a491963345e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
to test different h2 modes: "h2c" (clear text with protocol upgrade),
"h2" (encrypted, negotiating via ALPN extension), "h2-direct" (encrypted,
no ALPN), "h2c-direct" (plain text, no protocol upgrade). This patch-set
is an amendment to the recent fix in the protocol handler where we were
crashing in "h2c-direct" mode.
Change-Id: I3ff5ed1396a59b72b59a95f927d404ccd202d0b8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test changes the current directory to the test directory
in fromUserInputWithCwd(), but did not restore it, causing:
Totals 898 passed, 0 failed, 1 skipped, 0 blacklisted, 368ms
********* Finished testing of tst_QUrl *********
QTemporaryDir Unable to remove "C:\\TEMP\\tst_qurl-ryVxqu" most likely due to the presence of read-only files.
Restore the old directory at the end to fix this.
Change-Id: I62669868f3c6d97dd38ebac76515428c14b7e1e7
Reviewed-by: David Faure <david.faure@kdab.com>
Includes a fixup for 03fadc26e7, which
removed the check on empty transition list, needed when no data are
available. Ensured that such a data-free zone would in fact be
noticed as invalid during init().
Fixed handling of times before the epoch (we still want to consult a
POSIX rule, if that's all that's available) while ensuring we (as
documented) ignore DST for such times.
Fixed handling of large times (milliseconds since epoch outside int
range) when looking up POSIX rules. Gave QTimeZonePrivate a YearRange
enum (to be moved to QTimeZone once this merges up to dev) so as to
eliminate a magic number (and avoid adding another). Moved
year-munging in POSIX rules after the one early return, which doesn't
need the year range.
Added test-cases for the distant past/future (just checking UTC's
offsets; SLES has a minimal version of the UTC data-file that triggers
the bugs fixed here for them).
Fixes: QTBUG-74666
Fixes: QTBUG-74550
Change-Id: Ief7b7e55c62cf11064700934f404b2fc283614e1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Hardcoding IP addresses and their respective DNS records is fragile.
We care about Qt producing the same result as other DNS querying tools,
so testing that instead.
Running a python script for this is easiest, and assumed to be quite
reliable.
In case where python fails/is not present, fall back to nslookup.
That tool is available on Linux, macOS, and Windows, although the
output it produces varies. This change implements very basic
line-parsing that can interpret the various results encountered
during testing on those platforms.
This also reverts commit bbaceff253fae13d8e56691bc9de7e1981db5118,
which blacklisted the tests that failed due to changes in DNS
records.
Use the opportunity to replace usage of gitorious.org.
Change-Id: I967de226bd603c805df7fe3ed4e871d92d2d0750
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Remove unused dummyWidget and thus empty slots initTestCase(),
cleanupTestCase().
- Add slot cleanup() checking for an empty top level widgets list
and introduce QScopedPointer to ensure it passes.
- Use QTRY_VERIFY in hideAndShowOnWindowStateChange().
Flakyness has been observed on openSUSE:
FAIL! : tst_QSizeGrip::hideAndShowOnWindowStateChange(Qt::Window) '!sizeGrip->isVisible()' returned FALSE. ()
Loc: [tst_qsizegrip.cpp(126)]
Change-Id: I340fc1892dc00bcff1985e5a8a1e535975736484
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
More specifically, for masks and rotated images.
Add tests for it, also add tests that image metadata is
forwarded for converted and copied images.
Fixes: QTBUG-49259
Change-Id: I05d4a468b17f53a2625500b871c01b2c53b981a1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Also add a test checking that devicePixelRatio is forwarded to
derivatives of QPixmap.
Change-Id: Idb2b3f033ccc0fd49bf54b11f5dffbce5a19b006
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A string can parse as a non-zero double that's smaller than the
smallest float yet be a faithful representation of the smallest float.
So rather than testing for non-zero doubles less than the smallest
float, test for non-zero doubles that cast to float zero; these
underflow. This means small values close below the smallest float
shall round up to it, rather than down to zero, requiring a tweak to
an existing test. Added a test for the boundary case (and tidied the
test data).
Fixes: QTBUG-74833
Change-Id: I4cb30b3c0e54683574b98253505607caaf88fbfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QBrush constructor taking a QGradient would assert or crash if
passed a null (NoGradient) gradient. But it is not necessary for the
API to be as brittle as that: instead the result can simply be a null
QBrush object, i.e. the same as the default QBrush() constructor
creates (style == NoBrush).
This issue comes up now since with the recent introduction of
QGradient presets, the API opens for using QGradient directly, whereas
earlier, only the subclasses QLinearGradient etc. were to be used.
Fixes: QTBUG-74648
Change-Id: I1a9b1c4654e4375aa6684700a262cc0946851448
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For applications that set VERSION the installation targets of pdb
files were wrong in qmake's nmake Makefile generator.
Replace code that tries to reconstruct that target's versioned
extension with TARGET_EXT which already contains the fully resolved
target extension.
Fixes: QTBUG-74265
Change-Id: I9553a5f70170e077a59c866079ae51647ae80bef
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The DNS entry for the host has changed, dig answers with dns.google,
not with google-public-dns-a.google.com. While developing a proper
fix to the test, blacklisting this particular lookup allows
integrations to pass in the meantime.
Change-Id: Id37da6b24554803bf4e2c84be5b949ded40566e8
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It is constantly passing according to grafana.
Change-Id: I4953cd54e27adde8dad79e9a0f025960802e6c7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
DragEnter events always should start with the default state, which
is accepted = false. This was a copy-and-paste error introduced by
f8944a7f07.
Fixes: QTBUG-73977
Change-Id: I34b3ea97c9b4f4fc040a9e6f1befd6124533361d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QDoubleSpinBox did not resize when setPrefix() was called because the
cached size hint was not reset.
Fix it by resetting the cached size hints and update the geometry the
same way it's done for QSpinBox::setPrefix().
Fixes: QTBUG-74520
Change-Id: I6f42a24ab0a4ce987ecbe1505a634d929474436b
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In the QNetworkAccessManager machinery we would treat "no-cache" as if
it meant "don't cache" while in reality it means "don't return these
cached elements without making sure they're up-to-date"
At the same time as this change is made let's add test data for
"no-store", which replaces the "no-cache" test data.
Fixes: QTBUG-71896
Change-Id: Ieda98f3982884ccc839cac2420c777968c786f6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
It can happen that QDataStream is fed a QVariant that contains a QPixmap
representation, that will make the application crash when trying to
restore it
This is specially important for cases in which applications expose dbus
interfaces with QVariantMaps
Change-Id: Ife4feaef30f30e7e27d88464bd6b2a247f743123
Reported-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Recurse down the sibling at column 0 of the index instead down the
index.
Change-Id: Ie78d8b28eab7438ca3f83ee0df177115ca82806e
Fixes: QTBUG-73864
Reviewed-by: David Faure <david.faure@kdab.com>
While an invalid time-zone shall have no transitions, so may various
constant zones, like UTC. The TZ data may include only the POSIX rule
for such a zone, in which case we should use it, even if there are no
transitions.
Broke out a piece of repeated code as a common method, in the process,
since I was complicating it further.
Added test for the case that revealed this; and made sure we see a
warning if any of the checkOffset() tests gets skipped because its
zone is unsupported.
Fixes: QTBUG-74614
Change-Id: Ic8e039a2a9b3f4e0f567585682a94f4b494b558d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Set object names on the widgets in restoreState(), fixing:
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QDockWidget 0x7ffcb45e5e00 ';
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QToolBar 0x7ffcb45e5dd0 ''
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QDockWidget 0x7ffcb45e5e00 ';
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QToolBar 0x7ffcb45e5dd0 ''
Task-number: QTBUG-74242
Change-Id: I19f19e93de9df00d001b820a31836ce0b3cd2877
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Introduce a logging category for the qDebug()-output.
Add a meta type registration for QList<QPersistentModelIndex>, fixing
numerous warnings like:
WARN : tst_QItemModel::remove(QStandardItemModel:invalid start, valid count 5) QSignalSpy: Unable to handle parameter 'parents' of type 'QList<QPersistentModelIndex>' of method 'layoutChanged', use qRegisterMetaType to register it.
Fix a Clang warning about potential misuse of operator ,
Task-number: QTBUG-73864
Change-Id: I60998403a44f5df8767926951ee13d1ed1e93c37
Reviewed-by: David Faure <david.faure@kdab.com>
If this callback is not set then OpenSSL will call the callback
used for <= TLS 1.2 unconditionally when connecting. If using PSK it
will call it again later once the preshared key is needed.
We don't currently handle the TLSv1.3 PSK, but we definitely should.
But for now we can work around it - when psk_use_session_callback is
called we simply change the PSK callback to a dummy function whose only
purpose is to restore the old callback.
This is mostly done to keep behavior the same as it is now for users
(and to keep our tests running).
Later we can add a new signal and handle this new feature properly.
Task-number: QTBUG-67463
Change-Id: I4aca4ae73ec4be7c4f82a85e8864de103f35a834
Reviewed-by: Simo Fält <simo.falt@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit e79b1dcdf5)
Reviewed-by: Simo Fält <simo.falt@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 91ab70d17f)
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The code for generating round line joins is optimized with a shortcut
for the inner, normally invisible joins. For certain joins of a
tightly turning bezier, this optimization would lead to visible
painting error. Fix by avoiding the optimization if the next control
point is so close as to allow such tight turns.
As a driveby, make the angle > 90 test cheaper, since absolute
precision is not required in the optimization choice.
Fixes: QTBUG-75008
Change-Id: I293e0776003310dc36fa7f43fbcd9c25f1f8fa5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
@3x is in use on iOS already, so extend the handling in QImageReader
to all single-digit factors, like QIcon does.
Fixes: QTBUG-76273
Change-Id: Ic9442731c0549dbe8f797e1ddb1a09d8447e8441
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Fix test for systems that do not resolve their hostname to localhost.
Not using name resolution also makes the test more robust.
Change-Id: I558b9a975b9021536709db87fbf6a3b314f7ca79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Copy the test data into a temporary directory and do all the work there
without tainting the source directory. More importantly, do not pull in
any settings from the Qt build to test what actual users will encounter.
Change-Id: I793b86bfadb7597efb47c8f2d3fc863384c78a79
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When set to ExclusiveOptional, the new exclusionPolicy property let the
user uncheck the active checkable action in an exclusive group.
[ChangeLog][QtWidgets][QActionGroup] Added new exclusionPolicy
property. Set it to ExclusiveOptional to allow unchecking the active
checkable action in an exclusive group.
Change-Id: I61a9885cfd076d631cddf8c08313e4b488e5dc38
Fixes: QTBUG-71160
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
androidtestrunner is a tool needed to run qt tests on Android.
Now you can run tests as simple as you run them on Linux, macOS,
Windows.
"$ make check" it's all you need to run tests on the default android
device.
ANDROID_DEVICE_SERIAL env variable can be used to use a specific android
serial.
Use cases:
$ make -j1 check
-j1 is needed to make sure we don't run multiple tests in parallel.
$ ANDROID_DEVICE_SERIAL="emulator-5554" make check
Run the test on "emulator-5554"
$ make TESTARGS="-- -xml" check
Switch to xml output. All params after -- are passed to test
application.
$ make TESTARGS="-- -o out.xml,xml -o out.txt,txt -o -,tap -vs" check
Create two files out.xml and out.txt in the current folder and print
"tap" format to stdout and enable logging of every signal emission.
[ChangeLog][Android] Make it easy to run Qt tests on Android.
"$ make check" is all it's needed to run a test on an Android device.
Change-Id: I1a7f64b62608f7367b5a6aabf5d6c6e7e50242e6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Wait for the result at the target index if the future
is running and the iterator index is past the current
result count.
Determine if there is a result at the target index
after waitForResult() returns, and return -1/end if
not.
Also support decrementing the end iterator. In this
case wait for the future to finish in order to get
the final result count.
Task-number: QTBUG-59811
Change-Id: I8fcc711bab2e72c3c5196a55b794d25e18bb324d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Comes with backends for Vulkan, Metal, Direct3D 11.1, and OpenGL (ES).
All APIs are private for now.
Shader conditioning (i.e. generating a QRhiShader in memory or on disk
from some shader source code) is done via the tools and APIs provided
by qt-labs/qtshadertools.
The OpenGL support follows the cross-platform tradition of requiring
ES 2.0 only, while optionally using some (ES) 3.x features. It can
operate in core profile contexts as well.
Task-number: QTBUG-70287
Change-Id: I246f2e36d562e404012c05db2aa72487108aa7cc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... except where they are actually the component under test.
Java-style iterators are scheduled for deprecation.
Change-Id: If4399f7f74c5ffc0f7e65205e422edfa1d908ee8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previous blacklisting 5c4e5032b5 only
covered RHEL 6.6 and RHEL 7.4. The problem however exists in all
6.x and 7.x distros as they have the same openssl.
This however leaves us the problem with future RHEL 8. This will
keep blacklisting these tests there as well. We need a way to blacklist
versions with a wildcard so that we could say RHEL-7.*
Task-number: QTBUG-46203
Change-Id: I2cc52ba2eac949214ecaa02e19d9e623d5befc49
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use setPath() instead, as advised in the deprecation warning.
Change-Id: I2f22220885938808c8efb85720ad10f7e05801ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
'accept' breaks the order, making the static table unsorted and thus
std::lower_bound cannot find it and we always index it in a dynamic
table. Also, make this static table accessible to auto-test.
Plus fix some warnings quite annoyingly visible in qt-creator.
Fixes: QTBUG-74161
Change-Id: I47410f2ef974ac92797c9804aa55cb5c36a436c4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Some directories that depend on QtGui were being included without the
appropriate check for qtHaveModule(gui).
Change-Id: I7c348c74464d44cbd35a027f188f8a23bb2021d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Our implementation of compose table parser was added on Mar, 2013.
libxkbcommon added APIs for the same thing in Oct, 2014 (ver: 0.5.0).
After removing RHEL 6.6 from the list of supported platforms we were
able to move the minimal required libxkbcommon version to 0.5.0. Now
we can use the xkbcommon-compose APIs on all supported platforms.
With this patch we can drop nearly 1000 lines of maintenance burden.
This patch fixes user reported issues with our implementation.
Known issues:
- Testing revealed that xkbcommon-compose does not support non-utf8 locales,
and that is by design - https://github.com/xkbcommon/libxkbcommon/issues/76
Our implementation did work for those locales too, but it is unclear
if anyone actually uses non-utf8 locales. It is a corner case (work-arounds
existing) and likely a configuration error on the users' system.
- Looking at the release notes for versions above 0.6.1, only one issue
that stands out. Compose input does not work on system with tr_TR.UTF-8
locale, fixed in 0.7.1. Compose input works fine when using e.g. en_US.UTF-8
locale with Turkish keyboard layout.
Note:
With Qt 5.13 we have removed Ubuntu 16.04 and openSUSE 42.3 from CI:
Ubuntu 16.04 - 0.5.0
openSUSE 42.3 - 0.6.1
CI for Qt 5.13 has:
Ubuntu 18.04 - 0.8.0
RHEL-7.4 - 0.7.1
openSUSE 15.0 - 0.8.1
Currently the minimal required libxkbcommon version in src/gui/configure.json
is set to 0.5.0, but we could bump it to 0.7.1 to avoid known issues from above,
but that is a decision for a separate patch.
[ChangeLog][plugins][platforminputcontexts] Now using libxkbcommon-compose
APIs for compose key input, instead of Qt's own implementation.
Fixes: QTBUG-42181
Fixes: QTBUG-53663
Fixes: QTBUG-48657
Change-Id: I79aafe2bc601293844066e7e5f5eddd3719c6bba
Reviewed-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit d3eb9e944a)
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QListView::setSelection() algorithm is designed for items to
occupy their cells completely, which is not the case when
itemAlignment is used. The middle part of the selection rect
goes beyond the column borders and extra items are selected.
Use the introduced cellRectForIndex() instead of rectForIndex()
to calculate the middle part correctly.
Fixes: QTBUG-73684
Change-Id: I4a1e42a056d56e85a16d8ae0ffe18b78d1d6deb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The standard astc encoder has its own file format.
Change-Id: I9a2f7b1fa20ba344b79637bafb50ff2bd0596747
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Regular update in preparation for 5.13, adding tests for additions
since 5.9.4/5.10.1/5.11.0's update 7e946030 (the last to record its
upstream version sha1). Corrected the license header: it's now
published under MPL 2.0 (not 1.1); and our secondary licensing of it
is as LGPL3. Deferred full header over-haul until we've worked one
out in detail.
[ChangeLog][Third-Party Code] Updated DNS public suffix list
Task-number: QTBUG-72623
Change-Id: Iabdbbbfd79624830396c2a6fe0a73389bd6ce5b7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new test tst_QTouchEvent::touchOnMultipleTouchscreens()
needs the touchpoint IDs to be predictable, but another test currently
has a QEXPECT_FAIL; without release events, g_pointIdMap continued to
hold the touchpoints that were there when the test failed. So it's
necessary to add QWindowSystemInterfacePrivate::clearPointIdMap()
to be able to call it in the test cleanup function.
Fixes: QTBUG-73830
Change-Id: Ia6a70d028be95cd2b6676db6363ec408c0b116bc
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
With a QTreeView it is possible that collapsing an item can cause the
item under the mouse to be a new one and over the checkbox area for the
new item. As a result, a release can cause it to change the check state
even though it did not get the press for that item. This ensures that
it only allows the edit if it got the press as well.
Fixes: QTBUG-61476
Change-Id: I9a0821466afc84c97c9819755ccbacd729f7fbd7
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Due to removal of insignificant flag in
tst_qfilesystemmode.pro a bunch of tests will
either fail or crash in different operating systems.
Task-number: QTBUG-70572
Task-number: QTBUG-70573
Task-number: QTBUG-29403
Change-Id: I44925187acd72e600d2fec4f2604b67c66ecdd6b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Blacklisting did not work as blacklist should have contained osx
instead macos
Change-Id: Ifd76a38d371ccce545eb5df030aaa819b00a5b48
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
1. Fix erroneous logic, which was triggered in 'h2' mode (non-TLS connection)
- after the initial protocol upgrade/POST request was handled, the server
(on Windows specifically) was erroneously handling upcoming DATA frames by replying
with another redirect response.
2. Make the test less heavy by sending 1 MB of Qt::Uninitialize instead of 10 MB
- theoretically this could cause a timeout before the redirected request finished
successfully.
Task-number: QTBUG-73873
Change-Id: I961e0a5f50252988edd46d0e73baf96ee22eef3f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
One of the tests was not added to the parent subdirectory pro so this
is also rectified.
Change-Id: I270f1c2882260e3e3fac83d074ed6444c5dece19
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In 3ccdeb4b58, we removed the
specialized multi font engine on Windows, causing us to go
through the same code path when loading fallbacks as on
other platforms.
When combined with 97f73e9577,
this caused an error, because the code in
QFontEngineMulti::loadEngine() only overrode the families
list, but not the singular family in the request. In the
QRawFont test, this would cause the requested fallback font
to correctly have "MS Shell Dlg2" as the only font in the
families list, but the request.family would still be
"QtBidiTestFont", the name of the main font. The singular family
in the request was preferred by the windows font database when
creating the LOGFONT. We would therefore load the latter for
the fallback as well and since it still does not support the
characters in question, we would continue searching.
Fixes: QTBUG-72836
Change-Id: I1787b57febcf6030d5c5b09bc2ef2c9558f05beb
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The QImage API can not handle images with more bytes per line than what
an integer can hold.
Fixes: QTBUG-73731
Fixes: QTBUG-73732
Change-Id: Ieed6fec7645661fd58d8d25335f806faaa1bb3e9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As winrt does not have native windows, exposure check was just done by
checking, whether the window is the active window. If a window is shown
fullscreen though, winrtscreen will be resized. This resize triggers a
resize of every maximized or fullscreen window that is shown.
If we enter or leave full screen mode, we have to wait until the screen
resize and the subsequent window resizes are done and only then we can
consider the windows properly exposed.
This patch reverts 54bcb9d42f and thus
unblacklists tst_QGraphicsItem::cursor on WinRT.
Fixes: QTBUG-73545
Change-Id: If469fce319ed6b3a5d56b7bf3cbc11929b72bb11
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Prevent automatic insertion of line-breaks in blocks formatted with 'white-space:nowrap'.
This follows the example of white-space:pre.
Fixes: QTBUG-54787
Change-Id: If26f6a54106a02fe0e388947f6368ae4e86acf63
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some QSpinBox tests start failing after reverting to using legacy mouse
messages to handle mouse input in the Windows QPA. It seems to be caused
by a test that runs before it and moves the mouse cursor. Then when the
QSpinBox tests run, they create widgets that appear below the mouse
cursor, causing some mouse events to be generating and messing with the
events synthesized by the test itself. With the pointer messages being
used for mouse input, the legacy mouse messages that are generated under
this condition were being ignored. But by reverting to the old
implementation, the legacy messages are handled again, causing the test
to fail. This change moves the mouse pointer to a safe position during
the test initialization, so it does not depend on the state left by
previous tests. This change needs to be integrated together or before
the change in the windows QPA.
Change-Id: I91f7e9376dc495ee61250e0a7d908c1c2b685bc8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QFileDialog::setConfirmOverwrite()/confirmOverwrite()
- QFileDialog::setReadOnly()/isReadOnly()
Change-Id: I3cc1df76c8e40e95b8e9893ae06ef488fad26fb6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Now that MSVC (presumably) supports templates, we can merge the QRect
and QRegion versions of the functions into one.
The function has been renamed to invalidateBackingStore to better
reflect what it's doing.
Change-Id: I0e94a0cabd286cf97f2ba718a42ee0425f59d3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test fails on minimal and offscreen platforms.
Task-number: QTBUG-73522
Task-number: QTQAINFRA-2630
Change-Id: I6260454be35a8bbac1ab683d89fb7b262d3b69ab
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The coin agent starts to crash after the docker-compose call.
Need to have qt5 5.13 integrated first, then fix the real issue later.
Task-number: QTQAINFRA-2717
Task-number: QTQAINFRA-2750
Change-Id: I3dcd963b1c5cea0b2197f1589398d8a9ed18f46f
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Search the previous item or the next item in a model instead
of searching them on visual layout. This way the cursor will
not stop at the beginning or at the end of a row or a column.
Fixes: QTBUG-14444
Change-Id: I0ef203a4dcd876e4c50559fb87e61585f07434d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It is the flaky test causing most failures in qtbase at the moment.
Task-number: QTBUG-73545
Change-Id: Id9c5db27ebd08a4cf3c119d2fada12fdf1a5d2a0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We translate all pure gray colors into cmyk having c,m,y=0 and only
the k value expressing the darkness. But a fix introduced to avoid
division by 0 caused rgb(0, 0, 0) to be an exception to this; it ended
up being translated as c,m,y,k=1 instead.
Fix by catching the potential div-by-0 situation earlier and directly
set the orthodox cmyk translation: c,m,y=0,k=1.
Fixes: QTBUG-73171
Change-Id: I3774eaf9d96e096ac5c47c55d28881bea2bd1309
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
After the system reboots, the docker machine is created, but in a
stopped state. As stated in the docker docs, you might get errors when
attempting to connect to a machine or pull an image from Docker Hub.
For instance, Error checking TLS connection: ...
The solution is to regenerate TLS certificates of docker machine after
machine resums.
Change-Id: I8781ac0f0790aeda6cc778aee9c44d03c2b788d3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][SSL] The Schannel backend now supports ALPN and
thus HTTP/2.
Change-Id: I1819a936ec3c9e0118b9dad12681f791262d4db2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QTextFormat::setAnchorName()/anchorName()
- QTextList::isEmpty()
Change-Id: Ic1f5317980d116c846def3645d2a6cd61ba8679d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
