By depending on a simple variable instead of a more complex expression, we
can more easily use this file from other contexts.
Change-Id: Ib6ce1e2537f3e7ac19d25ad33454f25e85f71040
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Just like 'make docs' is used to build documentation, you will now have
to run 'make install_docs' to install it.
Change-Id: I57db53160ca91618784f4e39da0a47322c070208
Task-number: QTBUG-27590
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The qmake function prepareRecursiveTarget can now be used both by the
existing logic in default_post, as well as future recursive targets that
will be needed as part of the modularization of documentation builds.
Change-Id: Ibc72c3e224cb57c9f1796de3b04fda9de663dbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
that way we don't have to auto-generate code for that in the configures.
note that we now load qt_build_config.prf instead of just qmodule.pri,
which means that exceptions_off is set everywhere. we forcibly re-enable
them for testcases to minimize the deviation from default 3rd party usage.
testlib selftests are not qt testcases, so the one that needs exceptions
needs to enable them explicitly.
Change-Id: I1b9360bb11f2e80c92a2b63a7c45991ad17fda1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make sure that both debug and release versions of QML plugins are built
if Qt is configured accordingly. Also pass on the other QT_CONFIG configurations.
Change-Id: I4aaaf002068dd66277235bef7d1e3da3366d6d12
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default symlink is not available on Windows, so the qplatformdefs.h
header is not available there. Instead we can bypass the symlink and
use the actual mkspec name directly.
Change-Id: I1d7e05f35c1ff56befab5bed307cb1755ade8377
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It was only needed by qt_module.pri anyways, to handle index lookup
paths for qdoc when building documentation that depends on other modules.
Change-Id: Ibf60e2504f388b1aed7231eee04d89d3ba31c6eb
Hand-held-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The library name changed back from quick1 to declarative, so the
debug option should be renamed accordingly.
Change-Id: I192520a0a4de4764cf93da8cdbb14e24ba7de093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The wrong variable was used when reading the module settings
Change-Id: If35dc9694240a68393b24d7dba72520108cb9ac3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The module rpath should be the raw QT_INSTALL_LIBS, without the sysroot
Change-Id: I4140929b38a589134872593e4ce35eaf7d1cd5b7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
All bugs in the testing scripts are now fixed.
Task-number: QTBUG-27087
Change-Id: I764257a9bbee7efeb9265449f6fa6a15bdeba883
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
We need to make sure to put the .lib file into the LOCATION property,
not the .dll file, when building a static library.
Change-Id: I8912abfd172d0939cd07ba02901ab58093ccefa1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As was done in ae6d4c77eb, but that commit
missed the mingw branch.
Change-Id: I1d76ed2f8070dced2749aabe889fee48c4086744
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It looks like the qmake process failed if cmake is not installed.
Change-Id: I721796a602d8c572144e9d21be5d62b737698b73
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
on the way to eliminate scoping based on the spec.
gcc and msvc go as such into CONFIG, the other ones get the vendor
prefixed, as most are mostly unknown and thus likely to clash with
users' flags.
Change-Id: Ie622f53d90e96dbf05ce7d8c638cd355f04fa20c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
webkit actually tries to set it, and after the syncqt invocation changes
we were breaking it.
Change-Id: I1ec740b7e96c972ca173f384529dde1fc7e7cc13
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
for one, the syncqt invocation is qt module magic and thus simply does
not belong into the generic default_pre file.
second, this way the forwarding header generation is now linked to the
rest of the build magic for a particular module, which is way less
confusing for the unsuspecting developer.
Change-Id: Idc8e420d3faf173d7fff4a41e6e1c59af15c3023
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the surrounding TEMPLATE == vc* scope already implies vcproj, as dsp is
not supported any more.
Change-Id: I68363aca62e21135f42572040ccc7b189dcf32c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the variable can contain a complex command which would make a mess of
the makefile.
also, the tool doesn't change all that often, so it's not particularly
useful to depend on the binary.
Change-Id: I965d6555cb22bd6d5306b324f5cad0d747128e99
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake's new parser can deal with this much more readable code.
Change-Id: I772c9da4c9d049e2b332305f41496ed1196f60eb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
so it's available for other users as well
Change-Id: I2d5a14ae427575c07321ac532b13ee03308b837f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's been superseded by the QTTOOL.* module stuff.
Change-Id: I01c9fc3ebbb22111bfb03f82693c7cf08b5fc9d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This means user applications will default to Qt 5.0's API. Higher
versions or Qt 4 compatibility are opt-in.
Also set the default for Qt's own build to be 5.0 on all platforms
except Windows. On Windows, we need to set it to 4.9.
Task-number: QTBUG-25053
Change-Id: I603e0fda4785e64e1413cd82153a89e48005aa40
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
"CONFIG += qt warn_on release link_prl" is in every single spec (though
for link_prl there is one genuine exception and two apparent omissions).
Change-Id: I72e1e315586af828eefa3b0b70998ab892ec3c1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no reason whatsoever to duplicate this so many times, and even
less reason to have specs with a deviating default.
Change-Id: Ia25836c079580adebc373697b8bd03598f79c69b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
in modules which conditionally add dependencies it is hard to keep $$QT
free of duplicates at definition time, so clean it up when we use it.
Change-Id: Ia711e23bec3683525dfca80df4834e20b007ba1f
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
foo.name = VAR
foo.value = baz bar
foo.CONFIG = prepend
QT_TOOL_ENV += foo
will add the respective environment assignment to the generated command
line.
if value is a list, the elements are joined with the shell's path list
separator.
the value must be in the final form (correct path separators and
shell-escaped).
if .CONFIG prepend is set, the generated command will prepend the
new value to a pre-existing one.
Change-Id: I62c6dfb3ec50ce73d3a85a2099275f92b57a52dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The MODULE_DEFINES is also used by create_cmake.prf, whether there is an existing
pri file or not. In the case of QtWebKit at least, there is still a handwritten
pri file present.
Change-Id: I566c32a36aa6b84a455c2785c0da2bae57ea9091
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The deployment of cmake onto Windows test machines caused test failures
with no changes to the code under test. Mark all the ctest tests as
insignificant until the failures can be fixed.
Change-Id: If0cd4001ae6ec49fd38b9e0f97dd5326fddae433
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I36ba61bd4690de0bfe4a44e579eb554c82b53bb4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: Iad0161969e3632862102703fcc239358387e2181
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
