[ChangeLog][Important Behavior Changes] QDebug output for QStrings
changed compared to Qt 5.5.0 to more closely match the output of
previous Qt versions. Like Qt 5.5.0, QDebug will escape non-printable
characters, the backslash and quote characters, but will no longer
escape the printable characters.
Task-number: QTBUG-47316
Change-Id: I52dd43c12685407bb9a6ffff13f62ef68cbc80c5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, on some systems (Windows), we'll always create the same dirs.
Change-Id: Id3d5c7bf4d4c45069621ffff13f79ba91e0f974b
Reviewed-by: Christopher Adams <chris.adams@jollamobile.com>
[ChangeLog][QtCore][QLoggingCategory] Fixed behavior of default
severity passed to constructor or Q_LOGGING_CATEGORY with regards to
QtInfoMsg, which was previously treated as being more severe than
QtFatalMsg.
This is because the code was using the numeric value of QtMsgType as a
proxy for severity (via the <= operator), but the value of QtInfoMsg is
greater than QtFatalMsg. Instead, the severity ordering must be dealt
with explicitly.
Change-Id: I5f178afc735221b00cb67c2cea4fa964bd9079ce
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
All overloads of QProcess::start will now check whether the program
string is empty and in that case
- set error to FailedToStart,
- set errorString to "No program defined",
- emit error.
Until now only one of the three overloads behaved like this.
As a side effect, start(QString(), QStringList()) will not crash on
Windows anymore.
Task-number: QTBUG-47404
Change-Id: I2f93657204fe3643b1d74a74817843c05fc4a96b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Set QFileDevice::WriteUser on all files extracted from resources. These
are read-only, which is preserved by QFile::copy(). This caused the
deletion of the temporary directory to fail on Windows.
Change-Id: Id99de9160471c38bcec68025c89cfabbe209bdbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
On Windows, having read-only files in a directory can cause removal
to fail. When file deletion fails, check on the permissions, set
write permissions and retry.
Split apart code paths by OS in tst_QDir::removeRecursivelyFailure();
deletion of the read-only directory on UNIX should still fail.
Change-Id: I36e54be5229a7b552e90fd5f42722b868fa0b6ee
Reviewed-by: David Faure <david.faure@kdab.com>
An object that throws in its constructor cannot be reentered. This
violates both C++11 and C++98. It's also a regression from MSVC 2013.
The unit test is renamed to indicate what it really does, as opposed to
a misleading name that was probably a "thinko" on my part.
Task-number: QTBUG-47224
Change-Id: Ib306f8f647014b399b87ffff13f132436d0578ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QTemporaryFileEngine does not store the pattern, so it needs to get it
again from QTemporaryFilePrivate prior to reopening the file. It's
possible to lose the pattern when remove() is called on the object.
Task-number: QTBUG-46156
Change-Id: I66a35ce5f88941f29aa6ffff13dfc7f83d4fa3a2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
On Windows, t->timeout was updated only once, at creation time, so the
timer would always show as "overdue" after the first activation.
The timer is updated to indicate the full remaining time during the slot
activation, which is the behavior of the Unix and Glib dispatchers.
Task-number: QTBUG-46940
Change-Id: I255870833a024a36adf6ffff13ecadb021c4358c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
The rationale being that the empty string is not a valid path component.
[ChangeLog][QtCore][QDir] QDir::relativeFilePath() now returns "."
instead of an empty string if the given path is the same as the
directory.
Change-Id: Ibcf31904b2ae5edf5639d4c2e5ba234365d347fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since of Windows (Phone) 8.1 most of the desktop's thread functionality
is also available, so we might be able to share the code and get rid of
the extra implementation for WinRT.
Task-number: QTBUG-43837
Change-Id: I0ce907cd94899834527f88c70e1e395bafdb14b3
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
The Intel compiler defaults to "fast math" mode, which is why those
tests had been failing. So for the test that is trying to check whether
we conform to IEEE strict requirements, turn on strict requirements.
Change-Id: I02f8426b1c8e4241ac10ffff13e8efa224f313b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since Connection can be copied, one copy could be used for
disconnecting, but the other's d_ptr wouldn't get updated and would
continue to report as still connected.
This patch fixes that by making it check the internal state. That is
only done after d_ptr is already known to be non-null. Unfortunately,
that is the common path:
if (connect(sender, &Sender::signal, [] {}))
will call an out-of-line function. I don't see a way out.
Task-number: QTBUG-46213
Change-Id: I66a35ce5f88941f29aa6ffff13dfb45dca68a350
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Global (application-level) event filters are supposed to be run only in
the main thread, so ensure that it is the case.
Change-Id: I27eaacb532114dd188c4ffff13d5a17d991b8bd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... and enable auto-deletion on it.
This allows users of the function to get rid of their own
cleanup code. They just need to keep the shared pointer alive
for as long as they need it.
Drive-by changes:
- replaced QStringLiterals that were only used as the rhs of op+
- replaced an instance of mid() used as the rhs of op+ with midRef()
- enabled NRVO
Change-Id: I161d39461e020c9e8d473c0810dea2109fe0d62d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Zero is a legitimate size to be returned by bytesFree/bytesAvailable
functions, so change those functions to return some 'invalid' size
in case of an invalid drive.
This is also consistent with the original version from the Qt Systems
framework.
[ChangeLog][QtCore][QStorageInfo] Fixed sizes returned for invalid drives.
Task-number: QTBUG-45724
Change-Id: I312fba521fdf8d52d7a0ac0e46cacca625775e80
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, QStandardItem::operator<() returned true when both
items had invalid data. With MSVC in debug mode (checked
iterators/STL), this triggered an assert in
tst_QStandardItem::sortChildren() since that verifies
that !(b < a) when a < b:
Debug Assertion Failed!
Line: 3006
Expression: invalid operator<
Introduce a stable sort order for invalid items such that
other items are always less than invalid items and comparing
invalid items returns false (indicating equivalence).
Change-Id: Ica0f0d9f001c86973b1941dbcc1faf282e4c47df
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Give the link a name containing time stamp and ensure
it is deleted.
Change-Id: I846c58095acbcd92e7daccfd43a69dd97e95e7b0
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, the path was removed from list returned (indicating failure
to remove) only when the thread's list was empty
(last file in directory). Move the statement up so that removal
happens when it is found in thread's list.
Task-number: QTBUG-46449
Change-Id: Ib79199c731f79357b0e5c17636254fbeb3a754a0
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
As discussed on the development mailing list, the new overload is ambiguous
and breaks source compatibility. Therefore this function that is new in 5.5
shall be called readLineInto.
Change-Id: I2aecb8441af4edb72f16d0bc6dabf10cdabf32e2
Reviewed-by: Jan Kundrát <jkt@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not try to automatically register the meta type for Q_GADGET that
are not default constructible.
This fixes a source incompatibility in the function pointer syntax
of QObject::connect when such types are used as an argument of a signal.
Task-number: QTBUG-45721
Change-Id: I3065f6d57bc1f37e16988d2dee99118de250ca56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To cover the situation that the process ID got reused, the current
process name is compared to the name of the process that corresponds
to the process ID from the lock file.
If the process names differ, the lock file is considered stale.
[ChangeLog][QtCore][QLockFile] Detection of stale lock files got more
robust and takes the name of the process that belongs to the stored
PID into account.
Task-number: QTBUG-45497
Change-Id: Ic3c0d7e066435451203e77b9b9ce2d70bfb9c570
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Otherwise the type is registered with the wrong name
Change-Id: I68ec3a05e2528816626e648b46ccc9d70b004866
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Include class name, object name and file name when available.
For the bug in question:
QIODevice::read: device not open
becomes
QIODevice::read (QTcpSocket, "QFtpDTP Passive state socket"): device not open
Adding a static function also makes it easier to set a breakpoint
and find the culprit.
Task-number: QTBUG-46112
Change-Id: Ic181d8ab292912d1acbcc3cb84d9679fe4842ca0
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, make check does nothing, always succeeding.
Change-Id: I0fe04697e02ab0f33cd9aebb550777e200c70804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
freeData() takes a Data*, not a QContiguousCacheData*.
Task-number: QTBUG-45783
Change-Id: I96d7ac38dac24b418138ffff13d7fdf09b1d6b07
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
If the internal queue contained multiple events, but the first one did
not select any transitions, the external event queue would be checked
before the remaining events in the internal queue.
Change-Id: I1a7f49afdefaaf2b4330bf13b079b61344385ea0
Task-number: QTBUG-46059
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
My commit 6c973dee2c broke the case where setApplicationName
is called before the QCoreApplication constructor.
Fixed and added autotest.
Task-number: QTBUG-45283
Change-Id: If7bdb0d82be50b50a95a04027f5f9d7143c1a7ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When there are conflicting transitions, a transition that is nested
deeper (i.e. more specific) has priority. If two transitions have the
same nesting level, the one that comes first in the document order gets
priority.
Before this patch, only the document order was considered.
Change-Id: I58f188c270cabe2c386a783ceef7a0a955105425
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The behavior of "external" and "internal" transitions is identical,
except in the case of a transition whose source state is a compound
state and whose target(s) is a descendant of the source. In such a case,
an internal transition will not exit and re-enter its source state,
while an external one will.
[ChangeLog][State machine] Added support for internal transitions.
Change-Id: I9efb1e7368ee52aa2544eb84709a00ae3d5350d3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
As nothing changes in the state machine when selecting transitions for
events and then calculating the exit- and entry-sets, some calculations
can be cached.
The exit set for a transition was calculated multiple times. First in
removeConflictingTransitions, where the two loops would each calculate
them multiple times. Then secondly in microstep(), which would calculate
the exit set for all transitions.
Transition selection, exit set calculation, and entry set calculation
all calculate the transition domain and effective target states for
transitions.
Change-Id: I217328a73db2f71e371eb5f60a0c7b222303f0ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Doing a build on OS X without -developer-build fails.
Change-Id: I49c178ab2428177d9dd94f84620595a4bc132244
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Fixed issue that text/uri-list mimedata got from QMimeData::data()
was corrupted after setting it back via QMimeData::setData()
Change-Id: I2377523a9286519402ab9127ed7f3fa66e39a679
Task-number: QTBUG-45486
Reviewed-by: David Faure <david.faure@kdab.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I34374ed7269f941c330c65d97fe083c83d3df461
Task-number: QTBUG-33574
Task-number: QTBUG-30943
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Return QLockFile::PermissionError when file does not exist, preventing
the stale file detection logic from triggering.
Add Windows-only autotest trying to create a lock file in
a system folder guarded with checks for elevated processes
and UAC virtualization.
Task-number: QTBUG-45631
Change-Id: I1790f8f925660f6bf1df94c2ced901e6ec57cbb0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Add a special signal spy that records the time and path received
to obtain information on what triggered it for the flaky
cases where more than the expected signals were emitted.
Task-number: QTBUG-30943
Change-Id: I67510ce5e8e19b49c0ca41457f8357b720cade76
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This caused reverse order of session items in qt creator. Introduced
in ba287c55ef.
Change-Id: I5c37ca6a1ef4753b6449eb9e87b4def5ea858677
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtCore][QLockFile] Fixed a deadlock when the lock file
is corrupted.
Task-number: QTBUG-44771
Change-Id: Ic490b09d70ff1cc1733b64949889a73720b2d0f3
Reviewed-by: David Faure <david.faure@kdab.com>
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
