So we know what we're looking at if there's a test failure. This is like
QNetworkInterface.
Change-Id: Id75834dab9ed466e94c7ffff1444bf51f615e944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QXmlStreamReader also has QLatin1String overloads, which
greatly benefits parsers, since the vast majority of keys
in both JSON and XML are US-ASCII. This patch adds such an
overload to the JSON parser.
The value() function is all typical parsers need, so even
though many more QJsonObject functions taking QString could
benefit from the same treatment, value() is the single most
important one for read-only JSON access.
Add some more overloads, too, for functions that don't need
more internal scaffolding than value(). Requires adding a
dummy op[](QL1S) (forwarding to the QString overload) so as
not to make
QJsonObject json;
json[QLatin1String("key")]; // mutable
ambiguous between const op[](QL1S) and mutable op[](QString).
[ChangeLog][QtCore][QJsonObject] Added value(), op[] const,
find(), constFind(), contains() overloads taking QLatin1String.
Change-Id: I00883028956ad949ba5ba2b18dd8a6a25ad5085b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The path "/usrfoo" starts with "/usr", so if you tried to get
QStorageInfo("/usrfoo") when "/usr" is a mount point, you'd get the
wrong filesystem.
[ChangeLog][QtCore][QStorageInfo] Fixed a bug that caused QStorageInfo
to report information for the wrong filesystem if there is a mounted
filesystem at a path that is a prefix of the requested path (e.g., it
would report "/usr" filesystem for "/usrfoo").
Task-number: QTBUG-49498
Change-Id: I3e15a26e0e424169ac2bffff1417b7a27cd0132d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The C and C++ standards say it's undefined whether the preprocessor
supports macros that expand to defined() will operate as an ifdef.
Clang 3.9 started complaining about that fact.
One solution was to change QT_SUPPORTS to check for zero or one, which
means we need to change the #defines QT_NO_xxx to #define QT_NO_xxx 1.
The C standard says we don't need to #define to 0, as an unknown token
is interpreted as zero. However, that might produce a warning (GCC with
-Wundef), so changing the macro this way is not recommended.
Instead, we deprecate the macro and replace the uses with #ifdef/ndef.
Change-Id: Id75834dab9ed466e94c7ffff1444874d5680b96a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test should not depend on qWait explicitly
Change-Id: I13c01c47c9f7bae8b0c30afa2ac8550dc0fbf028
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On some operating systems, tzdata files carry the Local Mean Time (LMT)
for the city in question, which better represents how time was tracked
before standard, hourly timezones were introduced in the early 20th
century. The test was asking for the data for 1653-02-09 and assumed
that it would find the first Central European Time (CET) rule, which
Germany didn't start using until 1893-04-01.
This fix allows us to remove the blacklist that had been applied to this
test without investigation. It wasn't related to OpenSUSE, aside from
the fact that OpenSUSE tzdata carries the LMT data.
Change-Id: Id5480807d25e49e78b79ffff1449bdaf46901367
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Since they are non-characters and should not be used for text
interchange, it stands to reason that they should not appear in
unencoded for in a URL. To change the behavior, we just need to toggle
a simple flag for QUtf8Functions.
This behavior also matches the recommendation from RFC 3987. We do not
usually follow recommendations from that RFC (as it is generally
believed to be a bad RFC), but this one seems like a good idea.
Change-Id: Ifea6e497f11a461db432ffff1447486c623c12bd
Reviewed-by: David Faure <david.faure@kdab.com>
The "path" of a mailto URL isn't a file, so we shouldn't try to do
glob-based matching. I was getting application/x-ms-dos-executable
for a .com domain and application/x-perl for a .pl domain...
Change-Id: Ifc346c3bba83ba1a8476db3202492f4c2e4d52bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the formatting parameter wasn't exactly QUrl::EncodeUnicode, it
wouldn't encode, despite having to.
Change-Id: Id75834dab9ed466e94c7ffff1444bacc08dd109b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
The RFC does allow it. It even has examples showing them as valid. In
section 6.2.3, it shows:
http://example.comhttp://example.com/http://example.com:/http://example.com:80/
Change-Id: Id75834dab9ed466e94c7ffff1444b7195ad21cab
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The behavior was different in the variadic template code and in the C++98
code. The code without variadic template support was not copying the functor
object (e.g. a lambda) before calling it.
However, in the variadic template section, QtPrivate::FunctorCall::call
took the functor by value instead of by reference resulting in a copy.
QtPrivate::FunctorCall::call is a helper function for
QtPrivate::FunctionPointer::call which is only needed for variadic template
expension.
[ChangeLog][QtCore][QObject] If the compiler supports variadic templates,
no longer copy functor connected to a signal each time the signal is
emitted. Restoring the C++98 behavior.
Task-number: QTBUG-52542
Change-Id: I3ca20ef6910893b8a288e70af7de4c7b69502173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this change QFile::errorString function was returning an
"Unknown error". Now it will return the typical ENOENT string.
Task-number: QTBUG-45259
Change-Id: Ib7634f1aa5d91f77151cf92c58d3956e20a4cc6b
Reviewed-by: hjk <hjk@theqtcompany.com>
(for instance any global object which writes out to a config file in the
destructor). If the global cache isn't available anymore, don't use it.
Change-Id: I851a6e394d0b073aebf3ffd88b1966d424bfb92e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add some extra checks to the parser to make sure that addresses
like "300-05" aren't interpreted as valid IPv4 addresses.
Change-Id: I12475eebc9452e060779bb05e2b4ad9512a28281
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* A bunch of fixes and additions to the locale data
* Add new scripts from Unicode 8.0 and 9.0
* Map some potentially useful languages and territories
[ChangeLog][QtCore] QLocale data updated to CLDR v29
Change-Id: I759ccb27fe19be2722be913c5c2e6aa5f36e5c14
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Most containers have them in Qt 5.7, so add them
to QStringRef, too.
Brush up the docs, use the const_iterator typedef
in the API, for consistency with QString's docs.
[ChangeLog][QtCore][QStringRef] Added reverse iterators,
rbegin(), rend(), crbegin(), crend().
Change-Id: I3d2884a1b2faae02c610ab3871552b65bc6e2521
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The flags here are passed to a private QVariant constructor, and they
really represent a boolean - IsPointer or not.
Because the flag for the key_type was incorrectly populated with the
flag for the value_type, memory would be corrupted when using a mapping
type whose value_type is a pointer, but whose key type was not, such as
QMap<QString, int*>
This typo has been there since the concept was introduced in commit
v5.2.0-alpha1~807 (Add container access functionality for associative
containers in QVariant., 2013-04-05).
Task-number: QTBUG-52246
Change-Id: I9ecb13c603015eed2dc2ca43947fa0ecd6be8b5a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
People use this, so make sure there's a test for it.
I don't expect this test to fail, but static and
dynamic checkers should be presented with this
use-case, so they have a chance of warning, because
certain implementation strategies of QPointer may
make this code undefined.
Change-Id: I334bd73204ba4e186c4098fc6b7188917407e020
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The previous implementation overwrote multiple 'time' parts in the
qSetMessagePattern with the last setting in the pattern line.
%{time}%{time process}%{time boot} ended up to be output as if
%{time boot}%{time boot}%{time boot} was set.
This fix keeps the arguments of each individual 'time' part.
The same holds for multiple 'backtrace' parts. The previouse
implementation overwrote multiple 'backtrace' arguments with the
arguments of the last occurrence.
This fix keeps the individual arguments for the 'process' parts.
The individual arguments are applied in qFormatLogMessage.
A new test to verify the individual 'time' arguments application
is added, too.
Task-number: QTBUG-51944
Change-Id: Ib757614a482c5f31ed0a61b550daa2eea4b907b4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Drop addSub() test. It executes exactly the union of fetchAndAdd()
and fetchAndSub(), which have already had their UBs fixed.
No need to do fixes in duplicated code.
Change-Id: Ib72caab0310fce3ff9a40c261d8a38518f91ecaf
Reviewed-by: David Faure <david.faure@kdab.com>
The spawn code was only used to make QProcess work on QNX 6.5.0. Fork
works on QNX 6.6.0. The QNX spawn implementation has a flaw that causes
a deadlock in certain situations. When a working directory is specified
for the process, the QNX spawn implementation stops all threads except
the one doing the spawn so that it can temporarily change the process'
working directory. This can lead to a deadlock if the thread does
anything that conficts with something being done in a stopped thread.
QNX 6.5.0 is no longer supported in Qt 5.6.0 so we can just switch QNX
to the fork implementation and get rid of the spawn implementation.
Made a QNX specific adjustment to the hardExit test. There's a bug
in the OS that the test can run into because it does something that
normal applications wouldn't.
Task-number: QTBUG-47250
Change-Id: Ib32567d2c15ce651815858000035ac5aa6f35224
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Math functions are linked in by default on INTEGRITY.
Change-Id: I737ae87c02b2321caca3975f69525731e839d1a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Previously WinRT was using the UTC backend which fails on all platforms
for some QDateTime autotests related to timezone items. Hence switch to
the Windows implementation for WinRT as well.
However, the windows backend does query the registry heavily, which is
not supported on WinRT. Instead use the API version provided by the SDK.
Long-term we might want to switch to this version on desktop windows as
well, as direct registry access would not be required and we could
harmonize the codepaths for both platforms.
Change-Id: I620b614e9994aa77b531e5c34c9be1da7e272a30
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
A test should not write to its directory.
Change-Id: I34dfc36387cf5a637b325be29c8a19ff51d9b9c3
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
For platforms with builtin testdata/sandboxed platforms we need to
change the current directory to be able to create files.
Change-Id: I440205c95dd6df1308c6bf24b1b0f67fd697feab
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is analogous to QObject::inherits() but only requires the
metaobjects rather than pointers to a QObject instances. This is needed
for type checking on the backend of Qt 3D where we do not have access
to QObject pointers.
Change-Id: I14d26c4cbb5cc3fbecb57725f2c14ee0ffda4a11
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QRect::center() should be defined for any
QRect(x1,y1,x2,x2), INT_MIN <= x1, x2, y1, y2 <= INT_MAX
because the average of two signed integers is always
representable as a signed integer.
But not when it's calculated as (x1+x2)/2, since that
expression overflows when x1 > INT_MAX - x2.
Instead of playing games with Hacker's Delight-style
expressions, or use Google's patented algorithm, which
requires two divisions, take advantage of the fact that
int is not intmax_t and perform the calculation in the
qint64 domain. The cast back to int is always well-
defined since, as mentioned, the result is always
representable in an int.
Fix a test-case that expected a nonsensical result due
to overflow.
[ChangeLog][QtCore][QRect] Fixed integer overflow in
center(). This fixes the result for some corner-cases
like a 1x1 rectangle at (INT_MIN, INT_MIN), for which
the previous implementation could return anything
(due to invoking undefined behavior), but commonly
returned (0, 0).
Change-Id: I1a885ca6dff770327dd31655c3eb473fcfeb8878
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The compiler can statically check that this is undefined
behavior:
tst_qrect.cpp:3173:52: warning: integer overflow in expression [-Woverflow]
<< QRect(QPoint(0,0), QPoint(INT_MAX+(0-INT_MIN),INT_MAX+(0-INT_MIN)));
~^~
tst_qrect.cpp:3173:72: warning: integer overflow in expression [-Woverflow]
<< QRect(QPoint(0,0), QPoint(INT_MAX+(0-INT_MIN),INT_MAX+(0-INT_MIN)));
~^~
Fix by skipping the test (like most of the others are
in the block).
Change-Id: I359a5e16db6c660c9f11d7dd8fbb40730bd63887
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
A test should not write to its directory. Amends change
d0b54cede8.
Task-number: QTBUG-47176
Change-Id: If15258b4aed199792fab422b7ac1d74e22a9e322
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Signed integer overflows and underflows are undefined
behavior. A test that invokes UB tests nothing, because
the standard permits any outcome.
Fix by guarding the respective operations so
they are not executed if they would overflow
or underflow.
Change-Id: I40354ee88f40e4b47b70eac7790dc3a79ac70a57
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As found by GCC 6:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1476:9: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
tn += ">";
^~
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1474:5: note: ...this ‘if’ clause, but it is not
if (tn.endsWith('>'))
^~
Fix += argument from char[2] to char as a drive-by.
Change-Id: I814dc58830934cac7fcf81eb7fd7564b2abeb631
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
An empty read or a failed write on the underlying QIODevice of the text
stream would lead to an early return where we wouldn't correctly restore
the QIODevice::Text flag of the io device.
Change-Id: I5b632f45dea6ede3f408113556c3dad1b96574e2
Task-number: QTBUG-47176
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Suppose the user connects QProcess::readyReadStandardOutput with a
slot that calls QCoreApplication::processEvents.
Assume the event loop did not handle events between QProcess::start
and QProcess::waitForFinished. The process writes to stdout and exits.
QProcessPrivate::waitForFinished calls drainOutputPipes which calls
QWindowsPipeWriter::waitForReadyRead. This in turn will trigger
_q_processDied via the readyRead signal and processEvents.
_q_processDied will delete the pid object and set pid to null.
After drainOutputPipes returns, _q_processDied is called again but it
must not be called if pid is already destroyed.
Prevent calling _q_processDied if pid is null.
Task-number: QTBUG-48697
Change-Id: Iee047938ee1529057a1a43d71f4e882750903c7e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use default timeouts for wait functions. The increased timeouts will
only have an effect if the tests fail.
Print process errors if the process could not be started, while we're at
it.
Contract consecutive "#ifndef Q_OS_WINCE" blocks.
Change-Id: I6324e4c5b91b89ebb2580635b88705bbda922907
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is what std::vector implementations usually do,
because it minimizes memory fragmentation and useless
allocations since no user will call clear() unless
she intends to append new data afterwards.
Fix calls to resize(0) that show how existing code
tried to work around the issue.
Adjust test. Port from QVERIFY(==) to QCOMPARE as a
drive-by.
[ChangeLog][QtCore][QVector] clear() now preserves
capacity. To shed capacity, call squeeze() or swap
with a default-constructed QVector object, see the
documentation for an example.
Change-Id: I9cebe611a97e027a89e821e64408a4741b31f1f6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It made us skip the rest of the test, not just the small set of
sub-tests that were conditioned by the if () in whose else it sat.
Change-Id: I5e914e0aeb9d5ba44b21966d071aaccbc590365d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The windows.h include is not needed, the enums are properly known to
the metaobject system nowadays, and qprocess_p.h already has a
QT_NO_PROCESS guard.
Change-Id: I6bbdce19f097feb8260c51a29425279049aa0192
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Do not use a loop to execute similar but separate tests in
tst_QProcess::softExitInSlots. Use separate test rows with
distinguishable data tags instead.
This way we can deduce from CI output which part of this test failed.
Change-Id: Ic9bc996f2ced11b2bb1c33c1970e64937d860976
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Some entries were not updated and tests failed to succeed on platforms
which need to deploy content/testdata.
Change-Id: Ieb2b44c375b04cbaaecc1fb2303cc2478b86a100
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
testdata needs to be deployed to temp and current directory
needs to be set to that directory for the test to succeed.
Change-Id: I2dd023af9073d90afbb4ad60fcfb50bb1af4e159
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
WinRT does not allow do connect to the localhost due to security
constraints and sandboxing. Hence we need to disable those
currently.
Change-Id: Idb8c71397a41e5fa5bad9d618dba1bb389e71b9c
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
I had a doubt about what it would be, turns out it's ReadWrite.
Turns out it's documented, too :-)
Change-Id: I87c2ffc81aa240ffa88c495fe250b022d7fb3c21
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Similar to QMap::equal_range().
Will allow to easily fix inefficient code such as:
foreach (auto value, hash.values(key)) { ... }
[ChangeLog][QtCore][QHash] Added QHash::equal_range()
Change-Id: I6e19e25de632e897ad83d3141d9d07f0313f7200
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I didn't add a transpose(), because r = r.transposed() is
perfectly capable of filling that role, and just as
efficient. Existing API mistakes are no excuse to create
more of them.
[ChangeLog][QtCore][QRect/QRectF] Added transposed().
Change-Id: Ic38721e9028496fc9b50f4d4cef2e7a60532eed8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This patch makes sure that all events posted using Qt on top of the
GLib event loop have the loopLevel counter incremented.
This is done since Qt depends on the fact that all deleteLater() calls
are issued within the scope of some signal handler (in other words,
triggered by the chain sendEvent() -> notifyInternal2()).
There is a side effect though: in the conditions affected by this
patch, that is deleteLater()s issued within a glib event handler for
example, manually calling processEvents() or sendPostedEvents() with
or without the QEvent::DeferredDelete flag has the same effect, and
deferred deleted events are always processed.
While this is not a currently working feature which the patch breaks,
this side effect seems to be difficult to avoid without separating
sendPostedEvents() and processEvents() into a public and a private
method, in order to detect when they are manually called.
Such change could perhaps be done for Qt6.
An autotest for QTBUG-36434 is also included.
Autotesting for QTBUG-32859 seems to be more challenging in this
respect, due to its dependency on GLib.
Task-number: QTBUG-18434
Task-number: QTBUG-32859
Task-number: QTBUG-36434
Change-Id: Ib89175aa27c9e38bca68ae254d182b2cd21cf7e9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It must clear the previously cached sharedData->staticSelectors,
or else QFileSelectorPrivate::updateSelectors() does nothing and
the newly added static selectors end up being ignored.
Change-Id: If6997664629199be9f00de64c5dd01de2bf0a044
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
This makes implementing class methods that enable or disable a feature
stored in a QFlags<> member easier.
[ChangeLog][QtCore][QFlags] Added setFlag method to set or unset a flag
Task-number: QTBUG-27100
Change-Id: Ic602abbbf3100df78f21b7918573744d1bbd18c1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
After the commit 7ff655360f, case 4 in SoftExitProcess class relates
to a channelReadyRead() signal instead of stateChanged(). Accordingly,
terminateSlot() is fixed to handle a special case when process is not
running.
Change-Id: Ie0d3284f5d264037d00e4ad6d927c0766be562b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We have to make sure that the plugins to be tested are located inside
the virtual sandbox / relative to the application binary. Launching via
winrtrunner, a test can find those plugins then. It is not possible to
those via TESTDATA and extract them to temp, as LoadPackagedLibrary only
loads inside the sandbox.
Unfortunately this also implies that running those tests inside Visual
Studio will fail, as Visual Studio copies the virtual sandbox to another
location missing the plugins. For automated testing this should not
matter though.
Change-Id: I70f5ef2d56b3cf526b731fd885f12583c8f6e103
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Setting conflicts to isSet & DaySection cleared it if we hadn't seen
the day stipulated, even if there had been a conflict (e.g. over year)
before we hit the day-of-week that didn't match the (unset, so
defaulting to) 1st of the month. Explicitly test for conflict and
only set conflicts (to true) if there is a conflict. Added regression
test.
Change-Id: I7363eb66a8bb808d341738d14969039834f50db8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
As a result, this patch eliminates double-buffering in QProcess.
Change-Id: I436faa4a5ffc28ce77f959dd6089bef400ac39f6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some sequential devices allow data to be partitioned into several
channels that have the property of independently sequenced delivery.
Supporting such devices uniformly requires a unified API which provides
the user with a uniform concept of multistreaming.
This patch is based on QProcess's multiplexing model and introduces
the following features:
- ability to get the number of channels;
- multiple internal read/write buffers;
- channel selection functions;
- notification signals on channel activity.
To keep the source code compatible with single-channel implementations,
introduce a private class that references the current read buffer and
hides multistreaming internals from the user.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added multistreaming to QIODevice.
Change-Id: Idcaa6a618927c101c4c7284d2a633913be6a6ee2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Uses a time derived via .toUTC() to ensure the .toLocalTime() comes
out at the time we expect.
Task-number: QTBUG-49008
Change-Id: I2005127929c7eab1b7a3cbaba8d21df8c9585d17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime::toString for Qt::TextDate unconditionally uses the system
locale (because QDate::shortDayName and QDate::shortMonthName do).
Setting the default QLocale has no effect. If you ask me, those two
QDate methods are buggy, but they are documented that way.
Change-Id: I408dcb81ba654c929f25ffff1427366b04da5a43
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
msvc2015 reintroduced a couple of functions from the win32 API
towards WinRT.
Enable usage of those and simplify the file system engine.
Furthermore update the autotests.
Change-Id: I9eafffba0ddfd05917c184c4a6b9e166f86d71d9
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The important one is EET, for the benefit of our CI system; but other
European zones and the USA's coastal zones likely have enough hackers
in them to make this worth checking.
Change-Id: Idcc703bce29808e1a0a6279680cc8d3cbed38dac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Time zones change on the whim of politicians. Consequently, we can
seem to be in CET/CEST or on UTC (because we tested sample dates when
our zone coincided) when we aren't (i.e. we're in a materially
different zone at the time probed by some particular test). Make the
initialization of the globals that test this more robust against
governmental meddling and document the unfixable problem with Algeria:
a DST transition *on the epoch*.
Change-Id: I17c5c81d339b80af12f4ffab367e28052dd6c2fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are several European time zones; the only one relevant to the
tests here is CET. They won't work with WET, GMT or EET. So name
them and related variables for CET, not for Europe.
CET's summer-time isn't called CST; and the (existing) spring forward
test works only in CET/CEST, not elsewhere in Europe.
Change-Id: I55c7544bf792de7495700b749b935ec534831d8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using QUrl::PreferLocalFile we do want to strip the leading slash,
as toLocalFile() would do as well.
Behavior change by means of an example:
QUrl url(QUrl::fromLocalFile("C:/file.txt")
url.toLocalFile() --> "C:/file.txt"
Before:
url.toDisplayString(QUrl::PreferLocalFile) --> "/C:/file.txt"
After:
url.toDisplayString(QUrl::PreferLocalFile) --> "C:/file.txt"
Task-number: QTBUG-41729
Change-Id: I7d425541f6077ebcf3fcf46feeb7e0f03a0d7fe2
Reviewed-by: Dominik Haumann <dhaumann@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes] Starting with Qt 5.7, Qt
requires a C++11 compiler with support for C++11 atomics. This affects
user code too: Qt headers no longer compile with a C++98 compiler. The
minimum compiler versions for this release are:
* Clang 3.4 (found in XCode 5.1)
* GCC 4.7
* Microsoft Visual Studio 2012
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f496ea9363f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
This adds a way to resume reading from a stream after a ReadPastEnd error.
This is done by introducing a stream read transaction mechanism that keeps
read data in an internal buffer and rolls it back on failure.
[ChangeLog][QtCore] Added QDataStream startTransaction(),
commitTransaction(), rollbackTransaction(), abortTransaction()
functions to support read transactions.
Task-number: QTBUG-44418
Change-Id: Ibf946e1939a5573c4182fea7e26608947218c2d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There are three deprecated language codes that Java still uses for the
locale so we need to account for these inside QLocale by mapping them to
the right language.
Task-number: QTBUG-49632
Change-Id: Ib66b3f2763e085f7384228f2490b048bb56be259
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
