QMetaEnum::key(n) returns the n-th key, which is not necessarily the one
of value n. For the key of value n, we want QMetaEnum::valueToKey(n).
Change-Id: Ic90fe6b1cbe84978a02fffff141bf4a06074917a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When a QCOMPARE of values of type QColor fails, their
name will now be printed.
Task-number: QTBUG-51124
Change-Id: I76565daa338f038ea4f452e47705e638d94eaeee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
As these are strongly typed, they won't implicitly convert to int, so make sure
to cast explicitly.
Change-Id: Ic8daa31c528bbd8f399ab401d0963e13db191312
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
We need to have a finer grained control over the tests
we skip in our CI system. This adds a blacklisting
mechanism that allows blacklisting individual test
functions (or even test data) using a set of predefined
matching keys for the operating system and some other
relevant variables.
QTestlib will search for a file called BLACKLIST in the test
directory and parse it if found. The file contains a simple
ini style list of functions to blacklist. For details see
qtestblacklist.cpp.
Change-Id: Id3fae4b264ca99970cbf9f45bfb85fa75c1fd823
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This also has the advantage of not requiring the use of the locale
codec. Quite an advantage if you're debugging the locale codec. But it's
mostly so that we don't get question marks that hide the difference we
were trying to locate.
[ChangeLog][QtTest] QtTest now prints an escaped version of QStrings
that failed to compare with QCOMPARE. That is, instead of converting
non-printable characters to question marks, QtTest will print the
Unicode representation of the character in question.
Change-Id: I44c1ef3246b188c913dacd3ca4df02581356ea41
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The newly added generate_expected_output.py was used to get the expected
output into a more reproducible state.
Change-Id: I1ca75c8e0c5778d25c1df531bd298007aac0ff4a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before:
FAIL! tst_testcase::testcase: Compared values are not the same
Actual (actual): F0O
Expected (expected): FOO
Now:
FAIL! tst_testcase::testcase: Compared values are not the same
Actual (actual) : F0O
Expected (expected): FOO
Change-Id: I6f0768e4ef53e065b85a56879cecbad06fa34aef
Reviewed-by: Jason McDonald <macadder1@gmail.com>
"QTest" is the C++ namespace; "QtTest" is the library name
- Edited the logger output in qplaintestlogger.cpp
- Updated documentation
- Updated expected outputs for self-tests
Change-Id: I43c525c43221a8d4e843a00d6d55b0f06ef55fd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only QStringList was handled before, now any QList is handled.
A specialization for QStringList is still needed though, due to the way
template matching works.
Example with QList<int>. Before:
FAIL! : tst_QTextCodec::threadSafety() Compared values are not the same
Loc: [../tst_qtextcodec.cpp(2057)]
After:
FAIL! : tst_QTextCodec::threadSafety() Compared lists differ at index 0.
Actual (res2.toList()): '0'
Expected (mibList): '3'
Loc: [../tst_qtextcodec.cpp(2057)]
Change-Id: If0fdec3236ddb78a679ee549aba569ef5571c395
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Make the various versions of the failure message align consistently so
that it's a little easier to compare the actual and expected values. Of
course, the value won't align nicely unless the "actual" and "expected"
strings are the same length, but at least this commit makes that
consistent across all versions of the message.
Change-Id: If9ce231df3b5d279a06f6458fdb5da0aa4586068
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For data-driven tests, testlib previously counted one fail or skip for
each data row that failed or skipped, while it counted only one pass
for a test function where all rows passed and counted no passes for a
test function where some rows passed and some rows failed. A similar
problem also existed for benchmark tests, which could run multiple
iterations of the same test, with each fail and skip being counted but
only a single pass being counted for the entire series of iterations.
This commit makes testlib count one pass, fail or skip for each data
row. Test functions that are not data-driven count one result for the
test function, as before. Benchmark tests count one pass, fail or skip
per iteration.
A side-effect of this change is that the test output in plain text, xml
and light xml formats now shows a result for every data row and
benchmark iteration executed, allowing post-processors to correctly
calculate the total number of tests executed. Previously, individual
rows were not shown in the test output if they passed, making such
calculations impossible.
The only change to the xunitxml output format is to correct a bug where
no test result was recorded for a test function if the last data row
was skipped and all other rows passed -- in which case the overall
result should be a pass. Note that there is also a pre-existing bug
in the xunit logger, where no result is reported if all rows are
skipped; that bug is unaffected by this commit.
Task-number: QTBUG-21848
Task-number: QTBUG-22124
Change-Id: I7e17177e10d6e89e55b9684c159bd506f21d002b
Reviewed-by: Ed Baak <ed.baak@nokia.com>
Introduce a specialization for qCompare(QImage,QImage) that
checks isNull, size and format and outputs verbose messages.
Check isNull, size similarly for QPixmap.
Add an autotest:
- Add test to cmptest and make it a GUI application since
QImage requires QGuiApplication.
- Make testlib/selftests capable of running X11-GUI applications
by passing DISPLAY.
- Ignore stderr output for cmptest
- Add test data
Change-Id: I2b29c7822fbeedf2b22c90889739ed7ff859ce92
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The (disabled) alive selftest contained a test for the QStringList
specialization of the QTest::qCompare template. This test is unrelated
to the rest of the alive selftest, so move it to the cmptest selftest,
where QCOMPARE is tested.
Change-Id: Ic6f0e491dd3b3ce8b4ca1d49666a099815575eaa
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use a standard path for filenames that appear in the selftest's expected
test data. This will make future patches smaller.
Change-Id: I04b2e739d261f80d20b834e5b33c5b6e88d26379
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The selftests already used the @INSERT_QT_VERSION_HERE@ placeholder
in place of the real Qt and QTestlib versions in the expected test
output of the subtests. For unknown reasons, the same was not true for
the expected plain text output. In the past, this has caused Release
Managers to waste time incrementing the version numbers in these files.
Change-Id: I52f7870486fce128c04d53ff06978afa947474fd
Reviewed-on: http://codereview.qt-project.org/5375
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
