Use recursive descent to handle parentheses in config condition
expressions. This fixes cases like 'NOT (A AND B)'.
Fixes: QTBUG-117053
Change-Id: Iab1b6173abe00d763808bb972a9a5443ffa0938d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
By using a while loop instead of a foreach(RANGE), we can simplify the
code and remove the skipNext variable.
Also, we need to access the last used iteration index in a future
commit. This is not possible with a foreach loop without saving the
index in another variable.
Change-Id: I39306a0105fb31a6a8f39e9d4c47ee3424599a2b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
All of the continue() statements are not needed. There is no code after
the if-else chain.
Change-Id: I16188d14b4f05cb1e5f29bac4657149c4fce60a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
In a previous change, we ensured that all INPUT_foo cache variables are
unset at the end of configuration, so they don't influence feature
re-evaluation in case if a command line flag like -no-gui is not
specified upon second reconfiguration and a FEATURE_foo is manually
toggled in the CMakeCache.txt, effectively getting rid of
stale INPUT_foo values.
Unfortunately that causes an issue when configuring with -no-opengl
and then trying to reconfigure with 'cmake .'
Specifically various feature options like ENABLE / DISABLE use
INPUT_foo variables in their expressions.
qt_configure_add_report_entry CONDITIONs also use them.
These expect the INPUT_foo variables to be persisted, and if they are
removed, the expressions might be re-evaluated to a different value,
and cause re-configuration to fail or unexpectedly toggle features.
To support both cases described above, instead of removing all INPUT
variables when configuration ends, only unset those INPUT variables
whose corresponding FEATURE_foo variable has been manually toggled in
CMakeCache.txt or via an IDE.
Toggling a FEATURE_foo manually is intentional, which means the
INPUT_foo value should be discarded. Whereas pre-existing INPUT_bar
variables will persist, thus not breaking cases like the -no-opengl
report CONDITION.
Amends 2799391703
Pick-to: 6.6
Fixes: QTBUG-116973
Task-number: QTBUG-112957
Change-Id: I5851255bfa41a9a1d116630a5d9f7b9a74aa93ed
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Before this change, the dirty feature code only checked for
differences between FEATURE_foo and QT_FEATURE_foo, without taking
into account modified INPUT_foo values that might passed via the
configure script.
This led to issues in certain scenarios when reconfiguring with the
configure script.
For example configuring with -gui / -DINPUT_gui=ON and then with
-no-gui / -DINPUT_gui=OFF would fail saying
'Feature "widgets": Forcing to "ON" breaks its condition'
This happens because the widgets feature depends on gui being
available, but because INPUT_gui modifications don't trigger the dirty
feature re-eval code, we don't recompute the value of widgets.
Extract the code that takes into account the INPUT_foo variables into
a separate function, and use it both when computing feature values and
also when detecting dirty features.
This means any non-matching INPUT_foo variables will now also trigger
dirty feature checking.
Use the same function to replace the duplicate code we have to early
initialize the developer-build, no-prefix and pkg-config features.
Pick-to: 6.6
Task-number: QTBUG-112957
Change-Id: I775cf70b48291a659b0fecf7cb9570ec12735bca
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
To be able to reconfigure Qt with modified feature values using the
configure script, and take into account INPUT_foo values, we need to
ignore FEATURE_foo values. But we can't always ignore FEATURE_foo
values, because users might want to toggle them by editing
CMakeCache.txt or using an IDE.
What we can do is tell CMake we are configuring via the configure
script, in which case we can mostly be sure that any passed
INPUT_foo values should have higher priority than pre-cached
FEATURE_foo values.
We also need to remove all the cached INPUT_foo variables after they
have been used for feature computation, so that subsequent
reconfigurations where an INPUT_foo is not passed anymore, doesn't
cause a feature to accidentally reuse the previous (stale) value.
Pass -DQT_INTERNAL_CALLED_FROM_CONFIGURE=TRUE to CMake when configuring
via the configure script, and use that as a marker to make INPUT_foo
values have a higher priority.
This needs to be done centrally in qt_evaluate_feature and also in a
few more locations where we check INPUT_ values, like the developer
build and pkgconfig features.
Because QT_INTERNAL_CALLED_FROM_CONFIGURE would become a cached
variable, we want to remove it at the end of the configuration phase,
so that future 'cmake .' reconfigurations are not considered to be done
via configure.
To do that, we unset it right at the end of
qt_build_repo_end in a per-repo build, and in the final
qt_print_build_instructions call in a top-level build.
The latter needs a cleaner fix in follow up commits in qt5.git and
qtbase.
Pick-to: 6.6
Task-number: QTBUG-112957
Change-Id: I3fd338092041ef09e3f5a4dfbaf61da5deea0514
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Before this change, if a user toggled a FEATURE_foo variable, we only
recomputed the value for dependent features who's CONDITION would break
with the new value. If the CONDITION was not broken, the dependent
feature value would remain unchanged.
For example if FEATURE_developer_build was OFF, and the user
toggled it to ON, the FEATURE_private_tests value would remain OFF,
because OFF is a valid value for private_tests' CONDITION.
But we would like FEATURE_private_tests to become ON if we toggled
FEATURE_developer_build to ON.
To address this case, we need to recompute features who's dependent
feature values have changed.
The algorithm introduced by this change is:
- keep track of initial dirty features, aka track when FEATURE_foo is
different from QT_FEATURE_foo. We expect FEATURE_foo to be the
variable that a user toggles in the cache file or an IDE.
- when evaluating feature values, collect feature dependencies from
the various expressions given to options like CONDITION, AUTODETECT
- if any feature dependency is marked dirty, reset the feature value
to its auto-computed value and mark the reset feature as dirty
- repeat for all feature evaluations
Because feature evaluation is eagerly recursive, we will successfully
reset all features that need resetting.
To ensure against unforeseen breakages, allow disabling this behavior
by configuring with -DQT_NO_FEATURE_AUTO_RESET=ON
Adjust some of the messages to contain more details.
Note that the pre-existing behavior of resetting feature values when
the condition can't be satisfied, stays. For example if
FEATURE_developer_build is OFF and FEATURE_private_tests is manually
toggled to ON, it will reset to OFF
because its condition can't be satisfied (developer_build is still
OFF).
Amends 61943aefd6
[ChangeLog][Build System] The build system will now try to recompute
configure features when dependent feature values are toggled by the
user.
Pick-to: 6.6
Fixes: QTBUG-96936
Task-number: QTBUG-85962
Task-number: QTBUG-112957
Task-number: QTBUG-116209
Change-Id: Ib627f3675df8a3b08f4936cdc9c51f2d6e15f58c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
It makes more sense for it to live next to the other feature code.
Pick-to: 6.6
Task-number: QTBUG-96936
Task-number: QTBUG-85962
Task-number: QTBUG-112957
Task-number: QTBUG-116209
Change-Id: I8438e6fce9deaa5e709e4b0e2e1ea4eb0600a89a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
CMake does it for non-project-based try_compile calls if the
CMP0056 policy is set to NEW. That was introduced in CMake 3.2,
thus set it unconditionally.
The use case is to pick up custom -rpath-link paths when
cross-compiling.
Pick-to: 6.4 6.5
Change-Id: I726b90267dd46de116052b5b7f19b9354a568200
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This alone isn't enough:
Feature "xcb": Forcing to "ON" breaks its condition:
QT_FEATURE_thread AND TARGET XCB::XCB AND TEST_xcb_syslibs AND QT_FEATURE_xkbcommon_x11
Condition values dump:
QT_FEATURE_thread = "ON"
TARGET XCB::XCB found
TEST_xcb_syslibs = "FALSE"
QT_FEATURE_xkbcommon_x11 not evaluated
But when it says:
-- Performing Test XCB (extensions) - Failed because XCB::CURSOR not found
The user can know what to do.
Pick-to: 6.4
Change-Id: I810d70e579eb4e2c8e45fffd1719c0abf608ed30
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This replaces the qt_parse_all_arguments macro with the built-in
`cmake_parse_arguments(PARSE_ARGV`. In addition, a new function,
_qt_internal_validate_all_args_are_parsed, can be used to check whether
any _UNPARSED_ARGUMENTS have been passed to the function.
Fixes: QTBUG-99238
Change-Id: I8cee83dc92dc6acdaaf747ea6ff9084c11dc649b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid using perl in CMake scripts. Remove the syncqt.pl specific
code.
Task-number: QTBUG-87480
Change-Id: I7fcd5cc83d173ec463c275b5b50b84f25044a118
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Previously if qtbase was built with feature A set to ON, then building
qtsvg, then rebuilding qtbase with feature A set to OFF, trying to
build qtsvg would fail with an error message at configure time saying
that the feature value has changed.
This check was added quite early in the Qt CMake port, presumably to
catch accidental reconfigures that might cause long rebuilds.
This has dubious benefit though. We constantly had people telling us
they get the error without knowing what to do. The usual advice was to
remove CMakeCache.txt and reconfigure.
Instead of forcing people to suffer this dance, relax the constraint
by issuing a warning instead of an error, and make it more clear why
a rebuild might happen (a changed feature value might change
the generated module C++ header file which in turn might be included
by various project sources).
Amends 20633d97ab
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-95834
Change-Id: I992bd61024958869f3b995471b4c7ff75e3a33a0
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We have VAES code in qhash.cpp that isn't getting compiled right now.
Change-Id: Ibf4acec0f166495998f7fffd16d6961261dec361
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
On the Hurd there is the standard GCC toolchain, so it is possible to
query GCC for -dumpmachine.
Change-Id: Idc8e80c0937147a8ea656bc0320a83d647278455
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The mold linker is a new linker for Linux that provides faster link
times compared to BFD ld, ld.gold and lld.
It can be found at https://github.com/rui314/mold
To build Qt with mold, ensure that the binary in your PATH and then
configure Qt with with either
cmake /path/to/qtbase -DINPUT_linker=mold
or
/path/to/qtbase/configure --linker mold
The change was tested with gcc 9, clang 10, clang 12, mold
1.0.0. Only qtbase and qtdeclarative (and dependencies) were tested.
Pick-to: 6.2 6.3
Task-number: QTBUG-99270
Change-Id: I2e64a1f4257c37ff5b64a9326e548b9b46e07c80
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Previously we passed flags like -ld-fuse=lld only to compile
calls, but not to the link call of a compile test project.
Make sure to pass it to the link call instead by using
check_cxx_source_compiles + CMAKE_REQUIRED_LINK_OPTIONS
instead of
check_cxx_compiler_flag.
Note the flag that is passed is still via passed via the
compiler launcher and not directly to the linker.
Remove duplicate flag handling code.
Pick-to: 6.2 6.3
Change-Id: I1bf90573904a9df83240b6debfee3cc9e425c6bb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This amends commit 165e01d5d5.
Above commit broke the code that adds "${PROJECT_SOURCE_DIR}/cmake" to
CMAKE_MODULE_PATH. The semicolon that separates entries of
CMAKE_MODULE_PATH must be escaped. Otherwise, the semicolon separates
elements of the flags list.
Additionally, fix the QT_AVOID_CUSTOM_PLATFORM_MODULES code path which
lacked the addition of "${PROJECT_SOURCE_DIR}/cmake".
Pick-to: 6.2
Change-Id: I72f78cf066cabe6b0002dce1aa0294aa0dc9cbf0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since commit f3c7d22dd0 we do not use
libraries from /usr/local and other non-system locations on macOS. But
our configure tests still did. This led to discrepancies between
find_package calls in configure tests and the Qt project itself.
Mentioned commit removed /usr/local and friends from
CMAKE_SYSTEM_PREFIX_PATH. But we can't pass this variable to the
configure tests, because CMake sets it up and overwrites our value.
Pass CMAKE_SYSTEM_PREFIX_PATH and CMAKE_SYSTEM_FRAMEWORK_PATH as
QT_CONFIGURE_TEST_CMAKE_SYSTEM_{PREFIX|FRAMEWORK}_PATH variables to
tests.
Tests with separate project files that call find_package() must add code
like this after the project() command:
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH)
set(CMAKE_SYSTEM_PREFIX_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH}")
endif()
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH)
set(CMAKE_SYSTEM_FRAMEWORK_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH}")
endif()
Adjust pro2cmake accordingly.
Task-number: QTBUG-97076
Change-Id: Iac1622768d1200e6ea63be569eef12b7eada6c76
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Certain platform-related variables, in this case UNIX, must be set in a
platform module, because they get cleared after the toolchain file is
loaded. Such platform modules live in upstream CMake, but there is none
yet for INTEGRITY. This manifests in an undefined UNIX variable and
"System is unknown to CMake" warnings for the project and every
configure test.
Add the CMake module "Platform/Integrity" in the cmake/platforms
directory. Add this directory to CMAKE_MODULE_PATH to let CMake load
Platform/Integrity when the toolchain file set CMAKE_SYSTEM_NAME to
"Integrity".
CMake's module directory takes precedence, when loading platform
modules. This is special for platform modules and different from the
documented behavior of CMAKE_MODULE_PATH and include().
In case the user wants to provide their own platform modules via
CMAKE_MODULE_PATH, they can instruct Qt to not add its path by setting
QT_AVOID_CUSTOM_PLATFORM_MODULES to ON.
Make sure that configure tests with project files also load the custom
platform module.
Pick-to: 6.2
Fixes: QTBUG-96998
Change-Id: I9855d620d24dc66353cec5e847a2675b464ace26
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The separate_debug_info configure test uses the CMake variable
CMAKE_OBJCOPY. CMakeFindBinUtils in the test project finds the host's
objcopy despite CMAKE_TOOLCHAIN_FILE being correctly set.
We now add CMAKE_OBJCOPY to the list of variables that are passed to
configure test projects and remove the CMakeFindBinUtils include, which
looks rather internal anyways.
Pick-to: 6.2
Fixes: QTBUG-96798
Change-Id: I164c6bd1771e8789e9dd19b50573b33b8866bd3b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When setting QT_FEATURE_ values we need to convert the user-provided
FEATURE_ values to the one that is supported by QT_FEATURE_.
Pick-to: 6.2
Fixes: QTBUG-96300
Change-Id: Idd19fbf7f23f351a6c1cfdcedccfaaf6b0aa6e44
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This fixes the detection of always available architecture based on
user set CMAKE flags.
Change-Id: I541ac9569766a0fe05f4395c06f2ee3bcd77b035
Fixes: QTBUG-91090
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Don't export the MODULE_PLUGIN_TYPES property only when a module has
an associated configure.cmake file with features. Instead, always
export it if a module defines a plugin type.
This fixes qttools DesignerTargets.cmake file to contain the plugin
types it defines, given that the Designer lib does not declare any
features via a configure.cmake file.
Pick-to: 6.2
Task-number: QTBUG-95668
Change-Id: Ic036c31768e03b51d3bce9c2afe48e04f69f435b
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Passing -DFEATURE_developer_build=TRUE did not add the define
QT_BUILD_INTERNAL to src/corelib/global/qconfig.h like
-DFEATURE_developer_build=ON would.
This happened, because the feature evaluation in
qt_evaluate_feature_definition did a string comparison against "ON".
Normalize both sides of the string comparison, and thus support all
booly values for features.
Pick-to: 6.2
Fixes: QTBUG-95732
Change-Id: Ibf03579c05919b35219438361fc93676b7cca7cc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building Qt for Android on Windows, the precompile_headers test
failed if the source directory was passed as absolute path without drive
letter. See CMake upstream issue #22534.
Work around the CMake issue by ensuring that the path is properly
prefixed with a drive letter.
Pick-to: 6.2
Fixes: QTBUG-95652
Change-Id: I3154b6c0bb2f53533306227074b24fbbf5973b05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_config_linker_supports() repeated the conditions of all use_*_linker
features, because the features are not evaluated yet when this function
is called, and the function needs to know what linker is used to build Qt.
Move the required tests and features before any
qt_config_linker_supports() call and evaluate the use_*_linker features
early.
Change-Id: I306f032356682a0e82e4d7c4234e5bbc820ab143
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously, if a feature was marked as not to be emitted and there was
no user provided value for that feature, the build system would still
save the user provided value in FEATURE_foo with a value of ON (if the
conditions were met).
After a reconfiguration, the build system would hit the code path that
checks if the user provided a value for the non-emitted feature, and
would then warn about it and reset the feature value to OFF.
This would cause errors when reconfiguring a user project, complaining
that a feature value has changed.
Make sure to not save the user provided value for a non-emitted
feature and to always set its internal feature value to OFF.
Amends c4f5762b20
Pick-to: 6.2
Fixes: QTBUG-94921
Change-Id: I257c7fd795c8a6aeba3348cb72522e4f0b006dc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Rename various functions and variables to hopefully make the behavior
of feature evaluation clearer.
The previous names like 'set_value' or 'set_cache_value' or 'cache'
were too generic and unclear. One would have to carefully read the
code to understand what was actually set.
Add some doc comments about what FEATURE_foo and QT_FEATURE_foo
represent.
Amends c4f5762b20
Pick-to: 6.2
Task-number: QTBUG-94921
Change-Id: Ie6a7b83a4d54a83976b2706d4af82b39832d79f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
'ld' only capable to resolve circular dependencies by wrapping the
suspected static libraries and objects using --start/end-group
arguments. We want to detect if linker is 'ld' at configure time to
decide how to link the resource objects if finalizers are not enabled.
The qt_config_compile_test function is extended with an extra argument
since it's required to pass custom cmake flags to the ld-related test.
Pick-to: 6.2
Change-Id: I484fcc99e2886952d8b0232f37e4e6a35d072931
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the future it might be useful to print the config summary entries
of a Qt module configure.cmake file even if the associated module
is not built and thus qt_feature_module_begin is not called.
The repo src/CMakeLists.txt could then use a combination of
qt_feature_evaluate_features and a conditional
qt_feature_record_summary_entries to ensure the that summary entries
are still shown.
Change-Id: I124efc82163ddae48d9e72c70a677ec4c6588fac
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Features that are not emitted in the current
configuration (e.g. plugin-manifests on Linux) should not yield an
error. Instead, print a warning message like Qt5's configure did.
Set insignificant feature to OFF.
Remove the now unneeded emit_if parameter from
qt_feature_set_cache_value.
Pick-to: 6.1
Fixes: QTBUG-88305
Change-Id: I0f2ce152fca5f08417038c9bd2c07639ff6a3df4
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a feature is set in qtbase and is later set to another value,
an error occurs and an error message is given. This patch
changes the error message to contain both the preexisting and the
new value
Change-Id: Ifa9fc1f06bfde40e8fd5dfdf30165d4393abbd28
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This property is dynamically determined and set in the
Qt6${module-name}PluginsConfig.cmake files now.
There is no need anymore to export this property.
Change-Id: I2d164864c4099034b88f9ad852eae8b9f9e55f8b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add an optional argument to store the report command while feature
evaluation-only stage. This is necessary, because according to the
actual feature evaluation process, evaluation happens only once and it's
impossible to record any command during the evaluation-only stage.
Fixes: QTBUG-90319
Change-Id: I215fbe0a28a2661cd2d97d253b2e2c787d295cbd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Add output of feature condition error at the end of configuration
summary. Introduce qt_configure_add_report_error that may be used
to add error to end-point configure report without actual
configure interruption.
Fixes: QTBUG-88282
Change-Id: Idcf478da863ae6507438eb3370927d7d1f01e071
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Unset all QT_FEATURE_foo values for every build.
If any of FEATURE_foo is different of QT_FEATURE_foo, mark whole Qt
build as dirty. Reset FEATURE_foo for dirty builds to the calculated
value if it doesn't meet its condition.
Set Qt module as NOT FOUND if its target was not created during
configuration.
Main issue with this approach are generated files, that became trash
once the related features are disabled. This especially affects features
that enable/disable Qt modules. FooConfig.cmake files are created and
generate lots of warnings if feature was disabled. We may introduce a
module cleanup procedure at some point.
Fixes: QTBUG-85962
Pick-to: 6.0
Change-Id: Id71c1edb4027b24c6793063e40cc9d612c24ebce
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add '_qt_internal_dump_expression_values' function that dumps all
values evaluated by 'qt_evaluate_config_expression'.
'_qt_internal_dump_expression_values' doesn't evaluate undefined
features, only collect actual values.
Fixes: QTBUG-88476
Pick-to: 6.0
Change-Id: I9d09ffbd9f9fa91bc4f36536c58e7f118b06f9b9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move 'INPUT_' variable detection logic out of
'qt_feature_set_cache_value' function. Use 'INPUT_'
variable to enable/disable related 'FEATURE_' in case if
'FEATURE_' is not defined.
Fixes: QTBUG-88501
Pick-to: 6.0 6.0.0
Change-Id: I1162ac0fb562036898a37b52c3f80229ec8a0970
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
INPUT_ variables enable FEATURE_ variable only in case if valid
"true"-like value is assigned from command line.
Amends dc43061e9a
Fixes: QTBUG-87755
Task-number: QTBUG-88142
Change-Id: I65e85c7548981fdec94366b531f6df6396be71b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
"configure" script translates feature-related parameters to INPUT_
variables instead of FEATURE_.
Both INPUT_ and FEATURE_ variables passed to cmake script are
equivalent. FEATURE_ has higher priority in case if both are defined.
Fixes: QTBUG-87755
Change-Id: If697a0d62ab839877a3196ea74e631582a570dda
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake considers ON/OFF as booly string values regardless of the case.
Make the value comparison in QtFeature.cmake case-independent.
It's now possible to build Qt with '-DFEATURE_gui=off'.
Fixes: QTBUG-87948
Change-Id: I3d948e8219ad9728414803c8c4cd756034073b46
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Very simple AUTODETECT expressions worked fine, but expressions with
parentheses, for example, were not correctly evaluated.
Change-Id: Ibec4fa55474e149a701f861838fdea41d31beca0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
