Create a QPA abstraction for native menus, derived from the
Cocoa support in 4.8, but with the expectation to support
other platforms too. Update the QtWidget QMenu and QMenuBar
code to maintain their QPA equivalents if they exist.
Change-Id: Id605de3da8811dc832bf48b35f9107778ad320ff
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Starting off simple with fonts that follow the Playbook guidelines.
Change-Id: If772f9a20c5e7566543be6bba47b49cdf3bf1524
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The assumption that window creation order implies correct initial
z-ordering is broken when dealing with certain window types. In this
commit we special case the QDesktopWidget's window which maybe created
after normal application windows yet still need to be layered below
them.
Without this fix we may accidentaly activate the Desktop window when the
blackberry navigator service sends an event to activate the window
group. That results in broken focus handling.
Change-Id: I42dfde2efb4a0011e37e7bd2e7c5442590606a24
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Kevin Ottens <kevin.ottens.qnx@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since its hard to detect if __cpuidex() is actually available at
compile time, we'll add a function overload that will be chosen if the
intrinsic __cpuidex() is not available.
Note that the QtXgetbvHack that was used for _xgetbv did not really
work (MS compiler will bail out because of ambiguous overloads if the
intrinsic _xgetbv existed).
Therefore, we apply the same workaround for _xgetbv.
Change-Id: Iee3bf8bc6352ba0861b05d779f1f001d4eb013ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Specifying -device linux-amlogic-8726M-g++ is error prone. With this
change, one can specify any substring of the mkspec names under
devices/ and the first one will be picked.
Change-Id: I7c4522fdaefe4a11e9292f7831075aa766a62c0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
commit d60d98450a adds the support for
unix configure. This commit adds the same for Windows configure.
Change-Id: Ibcc604154fd7d0d9c6112ae5459d9bb842daf180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A (probable) typo was causing the code dealing with anchors
to use uninitialized values. This used to work by chance, but was
indeed detected by Valgrind f.i. when running tst_qregexp --
the indexIn test on anc11 data reported:
==3015== Conditional jump or move depends on uninitialised value(s)
==3015== at 0x514B4EA: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1813)
[...]
==3015== Uninitialised value was created by a stack allocation
==3015== at 0x514B3EB: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1803)
Fixing the code also makes the aforementioned test to succeed.
Change-Id: If7b3e518c1bbfcf12573d2637c33ef2eca27c4d5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The Encoding argument of QCoreApplication::translate()
is deprecated and source code is always assumed to be
encoded in Utf8. Simply remove the encoding argument
from the generated .ui.h files.
Change-Id: If6c40f6df13abd45a0303c863077972c3d1fb685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QIcon has been moved back from QWidget to QtGui, so the QIcon QVariant
and QMetaType handler can now be moved back to QtGui.
Also we can give back QIcon its old number, allowing to get rid of some
compatibility hack when unstreaming QVariant
Change-Id: I439d5c2987c06ecd619f394407850f678164afb8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
- Move the files and tests
git mv src/widgets/kernel/qicon* qrc/gui/image/
git mv tests/auto/widgets/kernel/qicon/ tests/auto/gui/image/
- update the include of QIcon
git grep -O"sed -i s,QtWidgets/qicon,QtGui/qicon," "QtWidgets/qicon"
git grep -O"sed -i s,QtWidgets/QIcon,QtGui/QIcon," "QtWidgets/QIcon"
- Adapt QIcon \ingroup documentation
sed -i s/QtWidgets/QtGui/ src/gui/images/qicon*
- Adapt export macro
sed -i s/Q_WIDGETS_EXPORT/Q_GUI_EXPORT/g src/gui/image/qicon*
- Update .pri and .pro files
- Remove the use of QStyle::alignedRect by copying its content (and
adapt slightly
- Use QGuiApplication::palette() instead of QApplication::palette()
- Add a hook in QGuiApplicationPrivate to call the
QStyle::generatedIconPixmap() from QtWidgets
Another commit follows to adjust QMetaType::Icon and move the QVariant
and QMetaType icon handler back in QtGui
Change-Id: I1b63759f892ebc02dfc30f41bb6e76e0b7451182
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Deprecate the Encoding enum in QCoreApplication and the
trUtf8() methods. Qt now assumes that source code is
always encoded in UTF-8 to be consistent with QString.
Change-Id: Ic62d6947046dee9be0cbd37f2d2f6976b9e572a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I418ccca7cb6e2aa1ba678e24dd36b39ebecadcbe
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The crash was caused by the fact that backingStore parameter is always
null (there seems to be no call in codebase that uses anything else but
the default values for this function).
Using "store" member variable instead of "backingStore" parameter gets
rid of the crash, and it is how it was in Qt4 - probably the bug crept
in when the paremeter and member variables were renamed in Qt5.
Task-number: QTBUG-25803
Change-Id: I4b1ccf540fddd6baa1dffa7f8165272b54caf238
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
e60ca0de60 reworked the hooks design.
hooks is initialized with a stub pointer if we don't have a platform
hook.
Change-Id: Ia60facfebd9e4d9c08d237c6d49793efb598130f
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Cursor information is now loaded from cursor.json.
Done-with: Johannes Zellner
Change-Id: I093cf8e944d495269973e777d0b444ae4ececee1
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Documentation authors sometimes make the mistake of
documenting a QML property more than once. Here, we
refer to cases where a C++ class is documented in a
.cpp file as a QML type. In this context one QML
property might be documented in two qdoc comments,
because the author of the second comment does not
search the file for an existing qdoc comment for
the property before adding the second one. When DITA
XML is generated for this case, the QML type element
will contain two <qmlproperty> elements with identical
id attributes, which is invalid XML. id attributes
must be unique within an XML document.
qdoc now reports an error for this case, indicating
that the QMLN property has been documented multiple
times.
This problem can't occur when documenting QML in a
.qml file because in .qml files, each comment must
appear directly above the thing it applies to.
Change-Id: I3a22650a58371fbda2ac7a5429fc036f41750423
Reviewed-by: Martin Smith <martin.smith@nokia.com>
the commit 53a420a4d1 merged translate()
functions. The simple versions need to be merged too.
Change-Id: Ie873483beb8ed0b911ae0568e97b427f4c6b74e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is for behaviour consistency with Qt on unix, as well as the
socket close issues described in the task.
Task-number: QTBUG-4465
Change-Id: Ida95650d8a9bd7b5bc3d3926d22e20a6d7eeb30b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
For high resolution or extremely large font sizes, the advance
cached here is likely to overflow, since FreeType returns 26.6
fixed point value and we only take signed char here for advance.
In those cases we should skip caching because there won't be
that many big glyphs after all.
Also move the metrics caching block a bit down to take glyph
embolden and oblique into account.
As a result we also don't need to increase the linearAdvance
size because any linearAdvance less than 128 should fit in
the old 10.6 fixed format.
Change-Id: Ic4920ada49954ce1e0a8673c9f33f30e385e3046
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This allows QML to emit signals without having to built lazily created
metaobjects.
Change-Id: If8068fb3cb35d79dc8f3ef79253d9c2eb7c93205
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This is slightly faster, and also avoids accessing the object's meta
object that would cause any lazily created meta objects from being built.
Change-Id: I0a78e09511c120bdbe707a1efc91ba480ab7680c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This change allows us to delay creating the actual meta object
until it is actually required.
Change-Id: I1c4a4226bd82fa606b206dd60322f49b49c32463
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
We no longer have code doing MMX or 3dNow! on Qt 5, so nothing defines
those macros. If nothing defines them, we don't need to undef
them. Note that the SSE case is a mislabel: the old "SSE" code on Qt 4
wasn't real SSE, it was MMX with some instructions added at the same
time as SSE was added. It's MMX that Windows 64 doesn't support.
As for QT_HAVE_ARMV6, this macro is replaced by the sub-arch detection
in qprocessordetection.h.
Change-Id: Ic3b00e1533e6b4cea32ba7824233de0a5c0fb32b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
In at least one case found in our testfarm, the compiler runs into an
ICE (Internal Compiler Error) compiling the new AVX code. The error it
reported was:
fatal error: error in backend: Cannot select: 0x7fbf1aa42210: f64 = sint_to_fp 0x7fbf1aa88a10 [ORD=1936] [ID=37]
0x7fbf1aa88a10: i32,ch = CopyFromReg 0x7fbf19538768, 0x7fbf1a9f2610 [ORD=1936] [ID=27]
0x7fbf1a9f2610: i32 = Register %vreg38 [ORD=1936] [ID=9]
As is the nature of ICEs, juggling the code around will probably make
it pass. But since I have plenty more AVX changes pending, which make
the code even more complex, it's also very likely that this issue will
happen in other places. For that reason, I choose to blacklist the
compiler instead.
Change-Id: Ide3201f0cc49c7ceb63e966f6de65a8315cbea4b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The CI system is now using the parallel_test flag to run tests in
parallel. This test has become flaky, or at least more flaky than it
was previously. Mark it to no longer run in parallel.
Change-Id: I47bca3be620a8f648a0eb9c9b9f26d2d925efc01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-O2 is already the default optimization level for release builds,
as defined in gcc-base.conf. In addition, it shouldn't be set for
debug builds.
Change-Id: Idd7406b0d135d9579676b389050fd6e5776e722c
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Compiler flags like CPU architecture and FPU should be set on
QMAKE_CFLAGS instead of QMAKE_CFLAGS_RELEASE, as the latter only
applies to release builds
Change-Id: I2e729a9e413934e904fc2810394e118940b8557f
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The atlas it assumed to have 8 cursors per row. All cursors have
to be square.
Change-Id: I7ffbad4662be450b146f84032bb26187894d528f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Presumably, this was set for QSound, which has since moved to QtMultimedia (and
no longer uses nas, anyway).
Configure also no longer seems to have logic for setting nas, as of
4535913c4f.
Change-Id: Ie5b351844bd169ad0548b0d29513adbf6f5d9a12
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextLine::cursorToX returned the line width for cursor positions
outside the width of a wrapped right to left line because the
leading space width was always calculated as 0.
Returning a non-zero width for the leading space does cause
problems for other uses of QTextEngine::alignLine() though
as the textAdvance already doesn't include the leading/trailing
space so subtracting it there double accounts for it.
Task-number: QTBUG-24801
Change-Id: I56cbb139814c32813bebb49de8c045b29154a958
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This change will generate working links between all modules in qtbase.
Some testing needs to be done on the other modules.
Change-Id: Ic65a9c753f891ac51427ca7c1cdcab13611d2f5b
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Maintain the consistency of QWizardPrivate's two members:
QVector<QWizardField> fields;
QMap<QString, int> fieldIndexMap;
during and after calls to QWizardPrivate's
void _q_handleFieldObjectDestroyed(QObject *)
member function. The failure to maintain this consistency
caused an out of bounds access and core dump in
QWizard's field(const QString &name) member function.
QWizard's field(const QString &name) member function expects
the values in the QMap fieldIndexMap to be indexes into the
QVector fields. Prior to this change
_q_handleFieldObjectDestroyed only removed the appropriate
entry from the map and erased it from the vector. It did
not decrement by one all the indexes greater than the index
that was removed from the map and erased from the vector
in the rest of the map.
For example ...
So if initially have the following mapping ...
"field0" -> 0,
"field1" -> 1, and
"field2" -> 2
with fields of size 3. After destruction of "field1" have ...
"field0" -> 0, and
"field2" -> 2
with fields of size 2.
Now attempts to look up "field2" using QWizard::field will
have an out of bounds error and possibly core dump or trigger
an internal Qt assert because an attempt to access
this->fields[2] will be made. It should be accessing
this->fields[1], but does not because the map is no longer
consistent with the vector.
This change adds a decrement by one for all the indexes
greater than the index that was removed from the map and
erased from the vector.
Task-number: QTBUG-25691
Change-Id: Ia2a41027628a65faec4ecdd5da235ddd19746a57
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
e.g. in QStaticText, the data is used just to get the line's y-position
and re-calculates just after the loop to determine the bounding rect and to draw the text;
in QWidgetLineControl, the data re-calculated over and over while the result
is seems to remain the same; probably the caching is needed here too
Change-Id: I0f7eb291532f63eccb9c5f749daebb73ff90632f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
A case was found where a method inherited from a
QML type marked abstract had the same name as a
method in the inheriting class, and these two
methods received the same quid. This was fixed
by including the QML type name in the guid for
QML methods.
Change-Id: I110eb254b3c6be014cb67fdc5b57b5aa2f575220
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
The current alternative is to define QT_WIDGETS_LIB before including
qtest.h, but this is not convenient/intuitive when using other build
systems than qmake. If one forgets the define, crashes happen when
using QApplication-related code.
Use <QTestWidgets> in one of the widgets autotests, for testing.
Change-Id: Id96be4976723aea3e8a28c9d0d594daab25a6d90
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The Mac platform requires populating the font database to build the
fallback list for font families.
Change-Id: I5bd63cd3c5fa6216c312d439390681f160a716fb
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Required for Cocoa platform menus support, we need a
way to update state after focusWindow() result changes.
Change-Id: Idc573888c3d75bcbff2252e243c4b57b15fc2fcd
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
cursor-atlas.png was generated from existing cursor images
(qttools/src/shared/qtpropertybrowser/images/)
Change-Id: Ic4b396590eaec93e14a4b0915b15f735f5b1a5f5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
On Windows, Unicode command line arguments are re-created from
the original command line filtering out the known arguments.
To avoid having to hard-code all arguments of derived application
classes, keep the original argv-array and use that to verify if
an argument is still present.
Task-number: QTBUG-25724
Change-Id: I5d7bbd9530b1b74e1dcd22a0edc4f323ef687d23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
