This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It was added for Symbian almost 10 years ago (d7057e7c1f1a), for a somewhat
dubious use-case. The Symbian code is since long gone (ae30d7141), so the
remaining pieces are just adding complexity to the already intricate workings
of the QtWidgets backingstore/painting logic.
Task-number: QTBUG-8697
Change-Id: I82af610a8ac26719c588ac63f06b4501f59b400d
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Qt has traditionally considered Windows shortcut files equivalent to
symlinks on Unix file systems. Because of NTFS symlinks, the
interpretation of shotcut files as symlinks is confusing.
In this change, QFileInfo treats shortcut (.lnk) files as regular files
but can follow the pointed object.
In addition, QFileInfo introduces a more comprehensive file type. So
that applications can make well-informed decisions about how to treat a
file system entry.
Based on the implementation of QFileInfo::type(), two inline helper
functions are introduced to QFileInfo.
1. isSymbolicLink, returns true if it points to a symbolic link.
2. isShortcut, returns true if it points to a shortcut.
[ChangeLog][QtCore][QFileInfo] Introduce QFileInfo::type() to replace
the isSymLink method.
Task-number: QTBUG-75869
Change-Id: Icc0dd52f9ad0ea50b0265d77ee0d0a3d25054e39
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
...with a failing test case for QTBUG-77299.
Task-number: QTBUG-77299
Change-Id: I42c4fc4bb96f8660f8ff9bea97e6096ca6cec972
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QTreeView allowed to set the sort column to -1 which shows the data in
it's natural order (when the model supports it). This functionality was
removed during the porting away from the deprecated sortByColumn(int)
functionality done in d0f909f8db
Readd the functionality and also allow it for QTableView.
Fixes: QTBUG-77419
Change-Id: I96b0c09ab9da36ca0a9de58fe0f37e2c56b1d51b
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
This functionality is especially convenient if meta-object system is
heavily used in a test. For example, if you need to test a bunch of
signals based on their names and/or argument types.
Change-Id: I09a4ecbbd3d0859b5fd466d9dde7679804eb7614
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After comparing colorspaces was remove from QImage equality, the test
was no longer testing what it was supposed to.
Change-Id: Ie7ee8ac2f488ea4254086cbb91a2662dc729e80b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
... in case of a test failure. QAutoPointer is private API, but here we can use it.
Change-Id: I45b734385cd13fdea95d0100f2d8152f969612f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Windows resource files support a subset of C preprocessor directives.
Among others they can have #include directives.
Use QMake's own scanner to retrieve the files that are included by a
Windows resource file and add them to its dependencies.
For the test case the TestCompiler class had to be extended:
runCommand is now public, and commandOutput is less peculiar.
Fixes: QTBUG-3859
Change-Id: I138703352c37c98297c0574a9a440510c1c494b8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This happened to work by chance, as QList::insert() would
gracefully handle out of bounds insertions.
Change-Id: I7ee1e645ed9a538946a509957ce5155641ffea1d
Reviewed-by: David Faure <david.faure@kdab.com>
This commit adds transitive dependencies to the plugins, so that a
sane set of default plugins get auto-imported when linking against a
module. It also provides a new function, qt5_import_plugins(), which
allows you to override the set of plugins that get imported. The decision
of whether or not to import a specific plugin is based on several custom
target properties and a very clever generator expression.
Note that this change only imports plugins on static Qt builds. It
does nothing on shared Qt builds, as the shared libraries already have
their own plugin import mechanism.
[ChangeLog][CMake] Added ability to auto-import non-qml plugins on
CMake builds
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: I2d6c8908b521cf6ba1ebbbc33a87cb7ddd9935cf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sendMouseMove() function calls QTest::mouseMove(),
which again calls QCursor::setPos() to move the cursor.
It then creates and sends a MouseMove event, using
the constructor which picks up the global position
by calling QCursor::pos().
On macOS 10.14, QCursor::setPos() may silently fail
if the user does not grant the application permission
to move the cursor (via a dialog). As result of this
the mouse move event gets an incorrect global position.
Provide the global position directly when creating
the event to make sure it gets the correct value.
Task-number: QTBUG-75786
Change-Id: I3e8df450fea802783a3d1dbe471753f502b42de3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We were loading “Background.png” from the KeyboardSetupAssistant
app bundle. As of macOS 10.14 that image is no longer
there.
Adjust auto tests and document the behavior.
Change-Id: Icb4dd73b3fa88927e87bb86db2bc9f7b4a8094f7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Commit b6ded193 added an unconditional dereference
of the platformScreen pointer, for calls where nativePostion
is non-nullptr.
Change-Id: I4a6fbbd0337f91d4fcb76c17b4dc60e1b9ad10ed
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As a macro, we can't directly deprecate it, but need to make it call
something deprecated. That is a new ctor with a new enum type
added. The type might be useful for other such ventures, so put it
into qglobal.h
Remove the QT_NO_UNICODE_LITERAL protection, as it's always false
these days, and QT_UNICODE_LITERAL is unconditionally #defined a 20
lines above.
[ChangeLog][QtCore][QStringView] Deprecated the (undocumented)
QStringViewLiteral macro. Just use u"" or QStringView(u"") instead.
Change-Id: I9141320225037e1bc6b7f920bf01a9d0144fdac2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are two cases:
In a BlockingQueuedConnection, QMetaCallEvent doesn't allocate memory
and instead passes already existing pointers through. A QSemaphore
is used to serialize data access between threads. So the constructor
taking a QSemaphore can be simplified to only accept an existing arg
array.
In a QueuedConnection, QMetaCallEvent needs to make deep copies of
the arguments, and memory needs to be allocated based on the number
of arguments. The previous code put the burden of memory allocation
on the code generating the event, while the memory was free'd by
~QMetaCallEvent. Instead, make it QMetaCallEvent's responsibility
to allocate and free the memory as needed, and adjust the code
generating QMetaCallEvents.
We can allocate the memory for types and pointers to arguments in a
single block, starting with the space for the array of void*, followed
by the space for the array of integers to avoid byte alignment issues.
By pre-allocating the space that's needed by three arguments, we can
avoid all mallocs for the majority of QMetaCallEvents.
Until this change has propagated through qt5.git, we need to keep the
old API that is still used by QtDeclarative around. Once QtDeclarative
has migrated to the new API, it can be removed.
Change-Id: Id7359ffc14897237ea9672dabae9ef199a821907
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If a project has DESTDIR and TARGET set to fixed values, then the
target paths conflict when doing debug_and_release builds.
With this change we're detecting this situation and yield a warning.
Fixes: QTBUG-2736
Change-Id: Ib163db3463322792ab9fa5b997285ac9fc9819ab
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This adds a manual test for the QTextTable border logic.
Two HTML files are bundled as resources:
table-border-test.html: Contains various test cases for the border
logic.
table-border-test-header.html: Contains a test case for printing a table
with a repeated header.
The test application allows:
- editing
- previewing
- printing
- opening the HTML in the system browser (via temp. file)
It is possible to edit the HTML with "live preview" so new test cases
can easily be implemented.
Change-Id: Ic88488bc8b7dd74d5c03c3363f55840423462325
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When I initially added it, it was ony for QCborValue, but I never added
the tests. Turns out there were two bugs:
[ChangeLog][QtCore][QBitArray] Fixed two bugs that caused QBitArrays
created using fromBits() not to compare equal to the equivalent
QBitArray created using other methods if the size was zero or not a
multiple of 4. If the size modulus 8 was 5, 6, or 7, the data was
actually incorrect.
Fixes: QTBUG-77285
Change-Id: Ife213d861bb14c1787e1fffd15b70573d162042c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When calling QTextDocument::clearUndoRedoStacks() with UndoStack,
there were two bugs: The first was that we were retrieving
the item at "undoState" and deleting this. This is actually the
upper limit of the for loop. If the stack does not contain any
redos, then it would be == undoStack.size() and we would assert.
If there were redos, then we would delete the item at undoState
multiple times (actually undoState times).
In addition, when the loop exited, we first removed the dangling
pointers using remove() and then there was a weird resize() to
the new size minus the old undoState.
This would either assert because we tried to resize to a negative
number, or it would arbitrarily remove items from the stack.
[ChangeLog][QtGui][Text] Fixed a crash bug in
QTextDocument::clearUndoRedoStacks(QTextDocument::UndoStack).
Task-number: QTBUG-69546
Change-Id: I8a93e828ec27970763a2756071fa0b01678d2dcd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Don't manage the ref-count yourself, as this requires the code to use
the QAtomic copy ctor, which we want to remove going forward. Using
QSharedData, we can let the compiler write the code for us.
Since 'ref' this way moves to the first spot in the list of effective
members, creating a 4B hole between itself and 'msecs', swap 'status'
and 'msecs' to fill the hole:
offset: 0 8 16 24
| | | |
without v v v v
adj.mnt: |*R*| | msecs | S | U | TZ....
before: | msecs | S | U |*R*| | TZ...
after: |*R*| S | msecs | U | | TZ....
This keeps the padding out of the critical first word, which improves
latency. That said, for accessing the members the old layout surely was
optimal. This layout optimizes copies and pessimizes access to 'msecs'
on 32-bit platforms without the Critical Word First optimization.
Requires adjustments to tst_toolsupport and the qhooks version.
Also default members using NSDMI, consequently drop the manual default
ctor.
Change-Id: I3c48e68694ad29b28a13aa47ea0f283fae52edd7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For symmetry with QSize and QRect and because there were some users in Qt.
Port those users.
[ChangeLog][QtCore][QPoint/QPointF] Added transposed().
Change-Id: If4f23dbcf7d67983a6b1885e0d1d538115b49e2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends 2e1763d83a.
The new range ctors need deduction guides, since the compiler can't
deduce the value_type from a pair of iterators.
Change-Id: I3ec1e5f91305b317c443b6a70246be416b55bad9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
some assumptions were incorrect: our test server immediately sends
its SETTINGS frame, as a result we have to reply with client preface +
SETTINGS(ACK). So QVERIFY(!prefaceOK) was wrong from the beginning and
was only passing by pure luck.
Change-Id: Ie43f0d4ac41deb0e5339badaae6149a9b2f9d9b3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Adds setters for transfer-functions and primaries.
This allows us to remove use of private QColorSpace API from the PNG
handler.
Change-Id: Ieeff81c813c253649500acd1e53f35247b872325
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Replace our use of 'gamut' with 'primaries'. One is the axes of the
color space, the other the volume of representable values. For the
currently supported color spaces those are mostly equivalent, but when
we later add support for scRgb, this would be misleading as it has the
same primaries as sRGB but a much wider gamut, and we would like to use
the same primaries/"gamut" id for it.
Also few people would know what "the sRGB gamut" is, but
"the sRGB primaries" is easily googable.
Change-Id: I3348ccaae27a071ec77a4356331b9bbbf92e0d19
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Replace the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Build docs for deprecated APIs conditionally, based on deprecation
version. Remove the docs of methods deprecated since 5.0.0, these
methods are not compiled anymore.
- Modify the tests to make them build when deprecated APIs disabled:
* Make the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods
are enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, add tests for the replacement
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Task-number: QTBUG-76541
Change-Id: I6aaf0a1369c479fb880369a38f2b8e1e86b46934
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- No need to use QSignalMapper here, replace its uses with lambdas.
- Replace index 'for' loop with iterator loop, to simplify the code.
Change-Id: Ide3d2db99a074c0233eb5c2fd7a9b217d804973f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
One of the tests above was unsetting a variable that enforces
the use of a temporary keychain. We have to set it back, otherwise
the test is failing. What surprises me though - why I had this
problem only locally and not on CI? Apparently, SecureTransport
is not covered by our configurations ...
Change-Id: I0ff1e3e304632869391ed61213c245b949d8c778
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Sona Kurazyan <sona.kurazyan@qt.io>
Change-Id: I5b584cbe468429c53c2d661a0d7957d74e7ad691
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
