The code used to fall back to anonymous login independently for username
and password; however, it should only use a fall-back password if the
username is missing or (case-insensitive) "anonymous". When a
non-anonymous username is given without password, we should simply skip
he PASS message to FTP.
If the FTP server requests a password, in the latter case, QFtp will
signal authenticationRequired; in all cases, if the server rejects the
given credentials, QFtp signals authenticationFailed. Either way, the
client code can then query the user for credentials as usual.
Task-number: QTBUG-25033
Change-Id: I2a4a3b2725819ab19c8a7e4baa431af539edcd8d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Unlike higher scopes (like scope 4, admin-local, which the last commit
used), scopes 1 and 2 require a scope in order to bind, even if some
operating systems are lenient. So test that we are able to bind to them
and do bind properly.
Change-Id: Ifb5969bf206e4cd7b14efffd14fba153eab965b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Binding without an interface and expecting the OS to select something is
not supported in all OSes. On FreeBSD, I keep getting EADDRNOTAVAIL. So
modify our test to only join, leave and send to multicast groups with an
interface selection.
With this, all tests either pass or are skipped for me on Linux,
FreeBSD, and macOS. On Windows, this revealed an inconsistency in
behavior, which this commit adds a workaround for.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb6815456494d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
tst_QUdpSocket::broadcasting and tst_QUdpSocket::pendingDatagramSize
fail on the new Ubuntu 16.04 clean template.
Task-number: QTBUG-65440
Change-Id: I0e973b9c90b7c5827406bac8138370b61992a115
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The FreeBSD kernel treats them specially, just like link-local (that's
probably why it calls them "interface-local" instead of "node-local").
So instead let's use a random address, which will avoid multiple
tst_qudpsocket, when run on the same network at the same time,
receiving each other's datagrams. It could happen, considering this test
has an 800-second timeout limit.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb592a3166547e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is not an official feature of the networking stacks and does not
work portably across operating systems. So just stop trying to do that.
This was failing reliably (not flaky!) with IPv6 on FreeBSD and
Windows. For IPv4, Windows apparently accepts 239.255.0.0/16 but not
other addresses, so remove IPv4 too.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb682c2839e95d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Test fails to start on FreeBSD:
FAIL! : tst_QUdpSocket::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
Loc: [/usr/home/tjmaciei/src/qt/qt5/qtbase/tests/auto/network/socket/qudpsocket/tst_qudpsocket.cpp(234)]
This commit is basically a revert of the Qt 4.8 commit
a951fb79139498774d021759d0466b4b2ff50e68. FORCE_SESSION was only used by
manual testing, as the commit message said
> 8. For manual testing, added the FORCE_SESSION macro to test behaviour
> of UDP sockets when they have an explicit network session associated
So I doubt it has been tested recently.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb569ebf53497b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
I broke it in commit 4da2dda2aa. It wasn't
flaky or anything: it was plain broken and would never pass. That
indicates no node in the CI has an IPv4 link-local address (and
apparently neither did I at the time).
Change-Id: Ifb5969bf206e4cd7b14efffd14fb62176546916e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
FreeBSD, for example, does not have SO_NREAD and its FIONREAD returns
the full socket buffer size, including IP and UDP headers.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb5d8ca778d16a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We have had test.qt-project.org for close to 3 years now.
Change-Id: I71488efd29b645f7b228fffd14fadf4627288243
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
... and unblacklist it on Windows.
From what I can tell there is no particular reason why this test fails
other than that it is a little too slow sometimes (these things happen).
So, to fix the test I bumped the timeout, but to avoid the test running
for longer on every test-run it now also ends when the socket enters
the "Unconnected" state.
Previously it failed 171/500 times, and after this patch it failed
0/1000 times.
Change-Id: I4266bff6b91aaaf502ee66265d01c3a177706402
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
... and unblacklist it.
It was blacklisted some years ago because it was failing too often.
It was failing because the ssl socket had already received and decrypted
all the data it was going to get, meaning the waitForReadyRead call was
just going to block forever.
Change-Id: Ia540735177d4e1be8696f2d752f1d7813faecfe5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test became a real pain recently. A close look at the test shows
several problems (strangely enough, the failure can never be
reproduced on real machines, only on VM - Ubuntu and RHEL 6.6).
There are several asserts that are firing from time to time here and
there. They show that the logic in test is broken/incorrect. QNAM can
open several connections to a host, our test then incorrectly resets
its 'client' data-member and bad things can later happen after
'bytesWrittenSlot' executed (and deleted a socket). For example,
I can reproduce this scenario in every second run:
1. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s1)
2. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s2)
QNAM sends a request on s1. We reply on s2 (which is already wrong)
and call client->deleteLater(), which resets client to nullptr.
If QNAM sends something else on s1, we hit assert(!client.isNull()).
To avoid this, whenever 'sender' in any slot is different from the
'client', we use the actual 'sender' to reply. Another problem is this
weird and rather cryptic waitForFinish which is not needed in this
particular test since we wait for reply error, not 'finished'.
As it happened before - it's not clear if these two problems
were the cause of guaranteed fails on CI - an integration failed
~10 times in a row in the same test (not happening anymore though).
Task-number: QTBUG-64569
Change-Id: Id9aa091290350c61fadf1c3c001e7c2e1b5ac8f4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also blacklist tst_QNetworkReply::ioHttpRedirectErrors(too-many-redirects)
on RHEL 6.6 in CI.
Conflicts:
tests/auto/network/access/qnetworkreply/BLACKLIST
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Task-number: QTBUG-64569
Change-Id: I7514fc0660c18fd3a3e1d0d0af3f15d879e3c6f4
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Backport from 5.10 to 5.9 (LTS).
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 9c765522d1)
Change-Id: I58c53bdf43e0f19b4506f3696d793f657eb4dc6f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Looking at the failures in grafana it appears this test is also failing
on Windows 64. The same fix applies then, and we use Q_OS_WIN now.
Change-Id: Iafcfd6d1e747f3c816878cad072fbfae3aee19ca
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch works around Windows X86 on QEMU antics.
It appears on this platform the test behaves in some unpredictable manner:
- WSAConnect with 255.255.255.255 does not always immediately fail with
some error, so socket engine waits for a connection timeout (30 s.),
but the test itself
- only waits for 5 seconds and then tests that a request has finished with
error, which is not true (we are still connecting).
To make it work - whenever we have bearermanager feature enabled, set
a connection timeout to something reasonable, not 30 s.
Since we try to connect to each address twice, make timeout 1.5 s
(so it's 3 s. in total and still is < 5 s.).
Task-number: QTBUG-64264
Change-Id: I1d40c140667fca8402ec9344e66d313b6df54256
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Blacklist ioHttpRedirectPostPut for Windows
- Amend 84396a3f93:
Keys need to be on subsequent lines
Task-number: QTBUG-62583
Change-Id: I6360ec7bd87de65a3294a0d22148f13579fcd292
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Similar to the problem found in QTcpSocket auto-test recently.
While the failure on CI looks differently (apparently, server process
starts but does not print anything), fixing the dependency does not
hurt and at least fixes the 'make check' scenario.
Change-Id: I8f29f3e492d22410533407a527f5fc8f664e7f5c
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
While removing insignificant flag in commit
38a0909d4e and blacklisting
autotests that still failed, qtbase builds didn't
verify VS2017. That broke qt5 builds which do build VS2017.
Task-number: QTBUG-64264
Change-Id: I5fdfa5dac6192f449a05146a9a422e428a710c84
Reviewed-by: Liang Qi <liang.qi@qt.io>
Looks like I never even tested this. There were two problems:
1) when we asked for the recvmsg and sendmsg functions, we used the
wrong variable (socketDescriptor was still -1)
2) we extracted the destination addresses, but never set them in the
QIpPacketHeader object
The added tests confirm that this works on Windows, Linux, Darwin,
FreeBSD. There also seems to be a problem, obtaining the destination
address on an IPv4 socket with a dual-stack sender (I can reproduce that
on FreeBSD, macOS and Windows, plus an old version of Linux).
Task-number: QTBUG-63605
Change-Id: I638cf58bfa7b4e5fb386fffd14ea732bddbc0c42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This test fails often and seems to be flaky.
Task-number: QTBUG-62583
Change-Id: Id3af283c89e392634a7af6e11bd05775a4295798
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This test starts two processes - server and client - and requires
an external executable ('stressTest'). In .pro file we have SUBDIRS
containing both 'test' (test itself) and 'stressTest' (client/server app),
but there is no explicit dependency and as result we run the test before
we build 'stressTest' thus failing to start those processes. This patch makes
'test' dependent on 'stressTest'.
Task-number: QTBUG-36629
Change-Id: I286b08bcff86b9afc4bbee87a75e887527eaf5f2
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Neither the exit crash of QTBUG-21102 nor the Windows failure of
QTBUG-24226 appear to be reproduceable.
Add verbose error reporting to getErrors() and blacklist
getErrors:ftp-host which has been found to fail with timeouts
on Linux and ioHttpRedirectMultipartPost.
Task-number: QTBUG-21102
Task-number: QTBUG-24226
Task-number: QTBUG-62860
Change-Id: I6b29f6184e83de8ffebf6ff0d80606512dca6419
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It fails for me on Windows 10. Therefore, this is wrong.
FAIL! : tst_QHostInfo::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
S:\qt\qt5-msvc2017-x64\qtbase\tests\auto\network\kernel\qhostinfo\tst_qhostinfo.cpp(194) : failure location
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed5691472a4760
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Recently we have updated our receive window size to a larger value.
Unfortunately, this also results in auto-test pumping through
more data, which probably takes more time on CI.
At the moment we do not have any public API on QNAM's level to
customize HTTP/2 parameters (aka 5.10/FF and so on). So we use the fact
that QNAM is QObject and we can set a property on it. This property
is our Http2::ProtocolParameters object that allows us to configure:
- HPACK parameters (in 5.10 - noop)
- session receive window size
- different SETTINGS as described by RFC 7540, 6.5.2.
2. Undocumented environment variable to set ENABLE_PUSH is not needed
anymore.
3. In 5.11 Http2::ProtocolParameter will become a public API
and we'll introduce a new setter in QNAM.
Change-Id: If08fd5e09e7c0b61cf9700b426b60b5837b6b2e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
c4cf90b1f7 made POST requests be
redirected properly, but this wasn't enough and should have included
every method/verb.
Change-Id: I37b12dc9fdffcbf2aadbd2360d4fc2584c024939
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The path wouldn't match if the cookie's path was root ('/') and the
URLs path was empty.
Change-Id: I6dcd10f1fdf4f48f14e50f1b169cbdfda7005849
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All POST requests that were redirected would previously turn into GET
requests. This does not follow the standard for HTTP codes 307 and 308.
Task-number: QTBUG-63142
Change-Id: Ibd25a9566066e589670a9bc34e5dc5111f8139d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In some cases when a session isn't needed (i.e. for localhost), the
session is not opened at all. If a program (e.g. our tests) redirects
from localhost to a different system (e.g. the qt network test
servers, or the internet) it will wait for a session forever. So, we
need to check if a session is needed for the redirect-target and then
open one. It is usually opened in
QNetworkReplyHttpImplPrivate::_q_startOperation
Change-Id: Id3b78182a3fb3f63f0235ecb1fb665df8bd0c4ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We already cleared 'cookedHeaders', which is a QHash for 'known headers'
(enumerators as keys instead of strings), now do the same for 'rawHeaders'-
not to end up with some weird mix of headers from all possible redirect
responses and the final response.
Task-number: QTBUG-61300
Change-Id: Ifd6655c4167840bb00d29446d36ce65ba2d5491a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
