This file provides common feature-functionality is supposed to be
included by QtFeature.cmake and QtProcessConfigureArgs.cmake.
Change-Id: Ifb483c2a9c4014d240c2a4d6ff07b5c0ceee9c3a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There was an inconsistency where configuring qtbase on Apple Silicon
with the following command line produced different results rom the
second variant.
$ cmake ../qtbase -DCMAKE_OSX_ARCHITECTURES=arm64
vs
$ CMAKE_OSX_ARCHITECTURES=arm64 cmake ../qtbase
That happened because the CMAKE_OSX_ARCHITECTURES variables was not
passed to project-based try_compile calls. This resulted in compile
tests like SIMD avx to succeeded on Apple silicon, which shouldn't.
To address that, always pass the architecture on macOS if it's
specified.
Change-Id: Ia12e86230cc6e5e11f387e3cbb273d90646ef2e3
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
qdevice.pri should embed info about the Android SDK, NDK, host,
platform api level and ABI.
The machine tuple test should not be run for uikit and Android
platforms.
Sysroot should also not be prepended for uikit and Android
platforms, otherwise it breaks Qt module include paths.
Task-number: QTBUG-85399
Task-number: QTBUG-82581
Change-Id: Ic48c88f6ab15d75c2ebc323c8d7a3b7e5596f3c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Show a status message when we run syncqt for a module (gives a bit
more insight into why the configuration seems to stall for a moment).
Remove some uninformative messages about generating config.h files
and Depends headers, etc.
Change-Id: I5ff2774b9cf5d92ddde564dc09f4197c2835ee4a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This adds the CMake equivalent to the classical -device-option key=value
configure argument:
-DQT_QMAKE_DEVICE_OPTIONS=key1=value1[;keyN=valueN]
The keys and values get dumped verbatim into qdevice.pri.
This patch also ports the machineTuple configure test. Its result is
written into qdevice.pri as value for the GCC_MACHINE_DUMP variable.
Change-Id: I29f2323fd87639fafaed99ec7446c7ee75504705
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The plugin-manifests feature has the "negative" CONFIG value
"no_plugin_manifest". On negation, we're supposed to strip off the
leading "no_" instead of adding another one.
Change-Id: Id2c66da41f22881272d5b923f12b85d9fcc2c9d0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously we checked the LINK_LIBRARIES property of the main module
target, but we should instead use the values of
INTERFACE_LINK_LIBRARIES set on the FooPrivate module.
Because both versionless targets and private targets are interface
libraries, we need to properly differentiate between them when
following versionless targets to their main associated target.
To do that, instead of using string comparison, export an additional
private _qt_is_versionless_target property, and query that.
Also make sure to set and export the _qt_config_module_name property
on the FooPrivate targets.
Also make sure to APPEND to EXPORT_PROPERTIES rather than override
(looking at you QtFeature.cmake).
Task-number: QTBUG-75666
Change-Id: Ia3261e218840e9f5217ab49755e8c876560e294d
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Consider a negated feature config value like the following:
qt_feature_config("foo" QMAKE_PUBLIC_QT_CONFIG NEGATE)
If this feature was disabled, it would turn up in both,
enabled_features and disabled_features of module .pri files.
Also, QT_CONFIG would contain foo.
Expected however is that QT_CONFIG contains no-foo, and only
disabled_features contains foo.
Fix this by prepending a "no_" prefix to the value, similar to the
"no-" prefix in the qmake build. The qt_correct_config function was
adjusted to recognize "no_foo" and translate it to the qmakeish
"no-foo" config value.
Config values that start with "no_" but do not correspond to a feature
are left untouched. You can still have values like
"no_valley_too_deep" or "no_mountain_too_high".
Change-Id: I23d8b18c84e04ea6dfa25cc6ccd8f7e86211b144
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a find_package() in a try_compile project doesn't find a package,
and we then link against a non-existent target, the configuration
failure of the compile test also fails the configuration of the
project.
To avoid that, separate library targets from non-targets, and make sure
to only link against the targets if they exist.
pro2cmake now outputs modified compile test project code which iterates
over targets and non-target libraries, and links against them when
needed.
Change-Id: Ib0f4b5f07af13929c42d01a661df2cabdf9b926b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
list(JOIN) removes a layer of escaping, which force doubling up
on the backslashes. Instead use string(REPLACE) thus making the
escaping a bit saner.
Change-Id: Ie3daf0112dd09fbcbaf8798552949470952611c9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some library entries in configure.json have a test entry.
An example is assimp in qtquick3d.
qmake tries to find the library via the sources section, and then tries
to compile the test found in config.tests/assimp/assimp.pro while
automagically passing it the include and link flags it found for assimp.
We didn't handle that in CMake, and now we kind of do.
configurejson2cmake will now create a corresponding
qt_config_compile_test call where it will pass a list of packages and
libraries to find and link against.
pro2cmake will in turn generate new code for the standalone
config.test project. This code will iterate over packages that need to
be found (like WrapAssimp) and then link against a list of passed-in
targets.
In this way the config.test/assimp/main.cpp file can successfully
use assimp code (due to propagated include headers).
qt_config_compile_test is augmented to take a new PACKAGES argument,
with an example as follows
PACKAGES PACKAGE Foo 6 COMPONENTS Bar
PACKAGE Baz REQUIRED
The arguments will be parsed and passed to the try_compile project,
to call find_package() on them.
We also need to pass the C/C++ standard values to the try_compile
project, as well as other try_compile specific flags, like the
toolchain, as given by qt_get_platform_try_compile_vars().
Change-Id: I4a3f76c75309c70c78e580b80114b33870b2cf79
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_STATIC must be defined for static builds to have the right
import/export symbol macros defined. Originally, this macro is wrapped
in a condition. That's why we extend qt_feature_definition to be able
to write a prerequisite to qconfig.h.
Change-Id: I610e60acc7f5bdc031eff6d53a76e0b229a5c8c2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Teaches configurejson2cmake about summaries / reports, so things
like enabled features, configure sections, notes, etc.
Add relevant CMake API for adding summary sections and entries,
as well as configure reports. The commands record the passed data,
and the data is later evaluated when the summary needs to be printed.
This is needed, to ensure that all features are evaluated by the
time the summary is printed.
Some report and summary entries are not generated if they mention a
feature that is explicitly exclduded by configurejson2cmake's feature
mapping dictionary. This is to prevent CMake from failing at configure
time when trying to evaluate an unknown feature. We should re-enable
these in the future.
A few custom report types are skipped by configurejson2cmake (like
values of qmake CONFIG or buildParts).
These will have to be addressed a case-by-case basis if still needed.
Change-Id: I95d74ce34734d347681905f15a781f64b5bd5edc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
And in order to do this we must teach qt_config_compile_test a
COMPILE_OPTIONS argument.
Change-Id: I66fa45142b544e3a2fc599af1c1a4c69b442b318
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce an internal qt_feature_evaluate_features() function
which takes a list of configure.cmake paths, and evaluates the
features declared in those files, thus setting a bunch of cache
variables.
This is required to implement the equivalent of what qtbase/src.pro
does, which includes the feature .pri files to decide whether
bundled 3rd party libraries need to be built.
Change-Id: I5552f488671c001eb3f204245b905ab981017a9f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Need to pass additional -Zc:__cplusplus flag when using
MSVC, so that the __cplusplus define has correct values.
Additionally make the option be propagated to consumers of Qt
via the public Platform target, which QtCore links against.
Change-Id: Ie1283c25334b93f993529beb7fb32bdb001627f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Before we only exported features that had outputType PUBLIC or PRIVATE
on the various "QT_ENABLED_PUBLIC_FEATURES" target properties.
Now we also export features that have output type privateConfig,
publicConfig and publicQtConfig.
The new properties names are:
- QT_QMAKE_PUBLIC_CONFIG for outputType == publicConfig
- QT_QMAKE_PRIVATE_CONFIG for outputType == privateConfig
- QT_QMAKE_PUBLIC_QT_CONFIG for outputType == publicQtConfig
These need to be exported for 2 reasons:
- other modules that need to check the config values
- in preparation for generating proper qmake .prl and .pri
information for each module
Note that the config values are now considered actual features
when doing condition evaluation. So if there exists a feature "ssse3"
with outputType privateConfig, its enabled state can be checked via
QT_FEATURE_ssse3 in consuming modules (but not in the declaring
module).
These config values are also placed in the respective
QT_ENABLED_PUBLIC_FEATURES, QT_ENABLED_PRIVATE_FEATURES properties
when exporting a target, so the properties will now contain both
features and config values.
In order to make this work, feature name normalization has to happen
at CMake time, rather than done by the python script.
This means that features like "developer-build" need to retain the
dash in the qt_feature(), qt_feature_definition() and
qt_feature_config() calls, rather than generating "developer_build"
as the script did before.
The normalization is done at CMake time. Feature conditions,
CMake code, and -DFEATURE_foo=bar options passed on the command line
should still use the underscore version, but the original name is used
for the QT_QMAKE_PUBLIC_CONFIG properties.
Note that "c++11" like features are normalized to "cxx11".
Implementation wise, the configurejson2cmake script is adjusted to
parse these new output types.
Also QtBuild and QtFeature are adjusted to save the config values
in properties, and re-export them from GlobalConfig to Core.
Task-number: QTBUG-75666
Task-number: QTBUG-78178
Change-Id: Ibd4b152e372bdf2d09ed117644f2f2ac53ec5e75
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Inside qt_config_compile_test we use two different calls:
check_cxx_source_compiles when given code, and try_compile when
given a project.
The former caches its results, while the latter does not, which means
that the try_compile calls are re-executed on each reconfigure.
Do what check_cxx_source_compiles does internally, and don't rerun
the try_compile calls if the results were computed once.
Change-Id: I2691ff08b7bb46c3fa60bbf5ed6278731c9b8e21
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We cannot use a generator expression in an if statement, it does not
work. Instead, we could inspect the CMAKE_C/CXX_COMPILE_FEATURES list,
but unfortunately that's not reliable. For example it detects that ICPC
supports C++17 when in fact that depends on the installed libstdc++.
Therefore this patch revives our own configure tests.
Change-Id: Ic3bc5762fbe81837722523e3881ac16e84628519
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow setting feature defines to ON, YES, TRUE, Y, OFF, NO, FALSE, N and
non-negative numbers like it's possible for other defines.
We'll not allow IGNORE and NOTFOUND, because they're a bit strange in
the context of features.
Change-Id: I7f6cd6dff4c68972921b499b28916c9ad789d510
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
As well as SIMD tests.
Change-Id: I43318418f90a6b9736eb89f008459c7d6adac8f9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generate appropriate qt_config_compile_test() calls for config tests
that have CMake projects. These are protected by an if(EXISTS) check
so that configuration doesn't fail for repos where the config tests
have not been ported yet.
Adjust the qt_config_compile_test() function to use try_compile for
projects specified via new PROJECT_PATH argument.
Change-Id: I83c061e384f68688a654b782fd7a9bede282d1e3
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This clarifies the weird pause when configuring, right after
the HAVE_reduce_relocations test.
Change-Id: I0edcbbd085286c20c4eaea8d8e15a509ec93d85f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some features check for module / target existence. Adapt conversion
script to handle that.
Reland after fixing it.
Change-Id: If4fb942c2e0d16e76a0b9b767bf478527851b0f7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In particular, Qt targets extended with other qt targets
(eg. Qt::VulkanSupport or Qt::LinuxAccessibilitySupport)
after the first add_qt_module were not taken into account when generating
Depends files.
Note that this patch updates the minimum required version
to CMake 3.15
Change-Id: I747deedd4d59e385876bc1a834ef9bdb6078911b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It breaks some conditions, and then the build fails not finding
some private header files in qpa, etc.
This reverts commit 35dc8f496d.
Change-Id: I1b51eac06fe9186181d3f0a7c78f22da7be534e2
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some features check for module existence. Adapt conversion script
and QtBuild feature condition parser to handle that.
Change-Id: I063e49a6fe9f8e9cf3aec985fd78ed4430398586
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This commit introduces infrastructure work to allow static builds of Qt
to handle importing of plug-ins.
Change-Id: Ife0ca3ca7276ea8ec96fe0eb6adf934fad7620ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Current lates CMake has a limitation that it does not allow exporting
custom properties from INTERFACE libraries. GlobalConfig is such a
library, which means that so far all the global features were not
actually exported.
Copy the feature property values from GlobalConfig to Core. Because
Core is an actual shared library, it keeps the custom properties
when exported, and thus Core feature properties will contain the sum
of Core and GlobalConfig feature values.
Change-Id: Idde305cbaf9ab85ecfbe29522dcbac1c44022b17
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The GlobalConfig target is not an actual module, so there's no point
in trying to create forwarding headers for GlobalConfig's qconfig.h
within qt_feature_module_end.
qconfig.h's forwarding header will be created implicitly while
processing QtCore target's SYNCQT.INJECTIONS value, which is read
from the headers.pri file generated by syncqt.
This also fixes trying to create forwarding headers when processing
the sqldrivers project.
Amends 02a015375a.
Change-Id: Ifd70d8c3ebf881ffdcf90db8d5d3b23309bc8fed
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This amends 4f1a155909 and
37b154858f which caused the regeneration
of some json features to be internal. Some of those features were
not evaluated any more unless they were referenced in another feature.
Make sure to explicitly evaluate all internal features as well.
Change-Id: I4367f309585fe29dc89d8a6b793de381956ae51d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Instead of generating defines guarded by feature ifdefs,
record the define information (condition, name, value, etc),
and generate the final define statement only if the feature
condition evaluated to true.
This removes the need to generate feature defines
(QT_FEATURE_foo) for features that have neither public nor
private outputs in the configure.json file.
Also note that all qt_feature_definition() calls
(which correspond to type:"define" outputs in json files)
now generate defines only in the public header, which seems
to be consistent with how qmake evaluates json files.
Change-Id: I5210b405d5735dd9df5f7a55d1ea9547bb7b1159
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Certain features like opengles2 can be enabled or disabled based
on the conditions that are specified in the ENABLE and DISABLE
parameters.
Because some of those conditions use STREQUAL with
a single quoted argument, we have to use
qt_evaluate_config_expression to circumvent the CMake bug
regarding single quotes, which is described in the function
implementation.
Only then will enabling / disabling work correctly.
Change-Id: I3b68ef611c985f0d8416fd089055fd862da1e542
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Added to QtFeature.cmake a way to be able to run feature_module begin
and end without having an actual module by passing NO_MODULE
Change-Id: Ib708bd3878e2591da193d18563c8932cc4b75e7f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When we do
qt_config_compile_test(egl_x11
LABEL "EGL on X11"
LIBRARIES X11::X11
...
)
then check_cxx_source_compiles() aborts if the provided targets do not
exist (we map LIBRARIES to CMAKE_REQUIRED_LIBRARIES). However we just
want the test to fail. Therefore this patch verifies the presence of the
targets.
Change-Id: Ibd7c1b50d585339af0ca0de58bc5c9cd64d65d6d
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
For now create targets a la "Qt5::Core" to stay compatible with the
current Qt5 naming scheme. The name is controllable via a CMake option.
Change-Id: If43c058221949b1900c2093f39ccc9d0f38028f1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Persist the target name in the CMake cache description
Change-Id: I124a8b89e5845d12301993b0546c8d5c91b8d8bb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is less self-contained than what we have, but significantly speeds
up cmake configure/generate runs.
This patch also warns when a feature is already defined.
Change-Id: I8cab63e208ba98756b47d362a39b462f5ec55e20
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Remove some unnecessary sorting, speeding up cmake by about 10s on my machine
Change-Id: Ieafbd16f6dd8cfe6d1af3c739bfe58e8bf724441
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make it a bit harder to mis-use qt_pull_features_into_current_scope.
Change-Id: I2a6be28d7c0e6207217cb1908ec22cc757acd01a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This simplifies the handling of features a bit as it removes the special
code to store two sets of features in Qt::Core.
Change-Id: I536d41cfc76a02af054e3cfbad6bda50b1e9e49a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
During qt_feature_begin_module no features are changed, so there is
no need to push features.
Change-Id: Id7ebcfad373caa284e790b7eb0a178eaa72216e5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Features are now always defined (to OFF) when they are not emitted.
Adapt the test for that.
Change-Id: Id5f662f07fea15c22027b9b00d1b53a288b4a0dc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Simplify the scope handling of features by providing a function that
just pushes all QT_FEATURES into the parent scope. Use it.
Change-Id: Ic6552fe495394d73fcec6becf6852745ec2d6d59
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(Re-)evaluate QT_FEATURE_* based on the corresponding cache values
named FEATURE_*.
Change-Id: I57e76af90221937e45979a6d0c366923983ca7d5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This gets makes it easier to see the QT_FEATURE_foo variables;-)
Change-Id: Ide9354d90eecdb15d6d5cec7c2bfb9cee348fb29
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Store QT_FEATUREs that are not emitted, but do not show them in the UI. Also separate
out the UI (FEATURE_foo) from the internal CMake value (QT_FEATURE_foo). This does
break the overriding of settings, but that did not work well before either. This
will be fixed in follow-up patches.
Remove fallout: xkbcommon_system was now evaluated where it was not before. Remove
it as that is always the case now.
Change-Id: I2d303827a1cc9afeef93ad73285a2043ddaa9766
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
