It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When the default format has letter and word spacing set then these
should be exported in the HTML's body tag. This also adds support
for the reading of letter-spacing and word-spacing set too, so that
the same html outputted can be read back in.
Fixes: QTBUG-83718
Change-Id: Ic4afca21eb05efb779dbf99c6b3c13373e851f15
Pick-to: 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The default font on Windows 10 (Segoe UI) will return the
wrong minimum right bearing at some sizes, which will cause
us to skip the textWidthVsWIdth() test at some scale factors,
since we cannot trust the layout to be perfect in this case.
Based on experiment, Arial is more accurate, so in order to
avoid skipping the test, we default to this on Windows instead.
(Note: The problem has not been observed with the default fonts
on Linux or macOS, so we only do this for Windows specifically.)
Task-number: QTBUG-84415
Pick-to: 5.15
Change-Id: I8cdb5d0d9922915a6ed1574d62a561dda0e1dc5d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There are some slight differences between normal drawText()
and QGlyphRuns/QStaticText for decoration widths in certain
fonts. We decided to accept this and tried working around it
in the test by using ForceIntegerMetrics (since the difference
is < 0.5 pixel). This enum has been deprecated, so we move
the tests into Lancelot instead, since the idea here is to
test for regressions, not to compare the two painter commands.
Note that there is something off about decorations with
drawGlyphRuns() and drawStaticText() which is exposed
(not caused) by this, perhaps related to using a matrix
for positioning, since that was untested before.
This also takes the liberty of moving the emoji test string
from text.qps, since this was not in the statictext.qps yet.
Change-Id: Ib2d697095cbd11829cdd50b3c0268c85e9607c78
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't want to have untested qtbase.
This reverts commit 3598ffcc26.
This change also skips two network tests on b2qt.
Change-Id: I5c6f5e19487775f0a1c0feafa5e085208cbf7e9a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Some fonts misreport the minimum right bearing, and in those cases
we may not be able to do a perfect text layout inside the bounds
set. This is a limitation we have chosen to accept.
To avoid random failure when testing this, we detect the case and
skip the test if we see that it may fail.
Fixes: QTBUG-84415
Pick-to: 5.15
Change-Id: I6b53ea2631c5c6e476e2902b5514829a2141796f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The bold+italic combination indicated by ***triple stars*** requires
this; but it enables combinations of italics, bold, strikeout, anchor
text (and associated link formatting), image alternate text, and inline
code formatting (monospace). A code span overrides the formatting from
surrounding spans (which might be a bug to fix in another patch, if we
compare to how md2html formats code nested in bold-italics for example),
but the format stack restores state when any char format span ends.
Task-number: QTBUG-81306
Pick-to: 5.15
Change-Id: I289556fa53de400eb50a4d159b9b344eafc517da
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In that specific wrapping mode, it will first try a normal word wrap. If
it doesn't fit within the specified line width it will discard the
result of that and try WrapAnywhere by calling layout_helper()
recursively. The problem was that at the point it called itself again it
had already adjusted eng->maxWidth:
eng->maxWidth += line.textWidth;
This was not restored, but carried on to the recursive call to
layout_helper(), so the end result was that the maximumWidth would
accumulate text widths from parts of the same line twice.
Due to the same recursive behavior the minimumWidth also had a problem:
It always returned the width of the widest word because it took the
qMax() of the minimum widths of the two passes, (WordWrap and then
WrapAnywhere) effectively making the minimum width always be the width
of the widest word (even though it could wrap at finer granularity).
Pick-to: 5.15
Task-number: QTBUG-77337
Change-Id: Ie7e9c17b157506352c2da38cc7f4a8dfa1283966
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If there is a negative right bearing on the last character of the string,
it will stretch past the tab position (which aligns the advance position,
and not the right edge of the glyph). For certain fonts, this would cause
the actual ideal width to be calculated as 301 instead of 300 (which is
the right alignment edge set in the code).
Pick-to: 5.15
Fixes: QTBUG-46206
Change-Id: I03e8b8fb86e9ebe5337d3ba3384ade73d2ccdd69
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When converting a text document to HTML, always convert it to utf-8,
as required by the HTML standard. This also means that we remove
the optional encoding parameter.
Change-Id: I0bd2fc9df2d06734e1c5b8053b964fbfbb6881e1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The CommonMark spec shows that it's not necessary to have a space
between the code fence and the language string:
https://spec.commonmark.org/0.29/#example-112
This also avoids a needless trailing space after a code fence that
does not include a language string.
Change-Id: I2addd38a196045a7442150760b73269bfe4ffb22
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The end of a code block nested in a list item is now detected;
and if the text of the list item continues after the code block,
it continues to be indented.
Code blocks should never be word-wrapped.
Fixes: QTBUG-80603
Change-Id: I4427f8b1d4807d819616f5cb971e2d006170d9be
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The effect of the soft-hyphen needs to be updated once the final the
break point has been found.
This change cleans the logic by using two variables keeping track of
soft-hyphen at current evaluated position and at last confirmed break
point. Also adds tests for supression of soft-hyphens in the tight
WrapAnywhere case.
Fixes: QTBUG-35940
Fixes: QTBUG-44257
Change-Id: I7a89a8ef991b87691879bb7ce40cec4a3605fdd5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The area reserved for font properties was too small for
the properties we needed, and as a result font properties
were added outside of the area and special-cased (in the case
of FontLetterSpacingType) or ignored (in the case of
FontStretch) by conditions that check if the property is
within the designated area.
We reorganize the enum values now that we can, and allocate
some more space for the font properties area.
Fixes: QTBUG-65345
Change-Id: I8121ff7f72102d8022c6a6d2f8ed9c35dcdbb321
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Quite a big change since it has been several years since
the last update. This drops the Harfbuzz source on top
of the existing code in Qt, and does the following
additional changes:
1. Deletes old source files that have been removed upstream
(everything named foo-private.hh is now renamed to just
foo.hh for instance).
2. Added a header guard to config.h because it may be
double-included.
3. Implement a memory barrier needed by hb-atomic.hh.
4. Changed the signature of hb_atomic_int_impl_add()
to take a pointer to match new upstream.
5. Updated .pro file to include new files and removed
old.
6. Updated qt_attribution.json
7. No longer disable deprecated APIs since
hb_ot_tags_from_script() is now deprecated and is used
from Qt code.
8. Updated and applied the patch in patches/ for CoreText.
9. Updated tst_qtextscriptengine::thaiWithZWJ() according to
changes in Harfbuzz and disabled it for system-harfbuzz,
since this may be an older version of harfbuzz depending on
the system.
Fixes: QTBUG-79606
Change-Id: I3f057a43ff44ee416628b75ef12fb1a221f31910
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The private object of QTextDocument has been exposed through
public APIs marked internal, which we should avoid as much as
possible, since it clutters the headers.
For accessing private data without adding friends, we have
a nice pattern of adding a static get() function to the
private class itself.
Fixes: QTBUG-55059
Change-Id: I03e949a677e03487e95f24e3608a06aa0a3511ab
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It was possible to end up with a dangling pointer in m_listStack.
This is now avoided by using QPointer and doing nullptr checks before
accessing any QTextList pointer stored there.
We have 2 specimens of garbage that caused crashes before; now they don't.
But only fuzz20450 triggered the dangling pointer in the list stack.
The crash caused by fuzz20580 was fixed by updating md4c from upstream:
4b0fc03077
Change-Id: I8e1eca23b281256a03aea0f55e9ae20f1bdd2a38
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Freetype can give us non empty bounds for zero-width characters,
this change just makes us skip metrics of characters already found to
not contribute to text advance. The coretext and windows
font-engines already uses the already calculated advance.
Change-Id: I82b3521a4fb92614be509be5982cd5ab9c1eb7de
Fixes: QTBUG-58854
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Widgets have a default palette and font that is influenced by several
factors: theme, style, QApplication-wide overrides, and the parent's.
If an application sets a font or palette on a parent, then widgets
inherit those settings, no matter when they are added to the parent.
The bug is that this is not true for widgets that have an application-
wide override defined by the platform theme. For those, we need to merge
parent palette and font attributes with the theme, and this is currently
not done correctly, as the respective masks are not merged and inherited.
This change fixes this for fonts and palettes. Children are inheriting
their parent's inheritance masks, combined with the mask for the
attributes set explicitly on the parent. This makes the font and palette
resolving code correctly adopt those attributes that are set explicily,
while leaving everything else as per the theme override.
The test verifies that this works for children and grand children added
to a widget that has a palette or font set, both when themed and
unthemed. Children with own entries don't inherit from parent.
The QFont::resetFont test had to be changed, as it was testing the
wrong behavior. If the child would be added to the parent before the
font property was set, then the test would have failed. Since this
change makes sure that children inherit fonts in the same way, no
matter on when they are added to their parent, the test is now
modified to cover both cases, and ensures that they return identical
results.
[ChangeLog][QtWidgets][QWidget] Fonts and palette settings are inherited
by children from their parents even if the children have application-
wide platform theme overrides.
Change-Id: I179a652b735e85bba3fafc30098d08d61684f488
Fixes: QTBUG-82125
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
We added a work-around to disable the test when the Waree Book
font was not available, but this also excludes perfectly valid
versions of the font, so it is a bit unfortunate.
Change-Id: Ibeeff78d87acc384c1aa1b01e988edd524c60575
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The "title" in markdown is the tooltip, not the name attribute of
a link. Also, tell the char format that it's an anchor.
Change-Id: I2978848ec6705fe16376d6fe17f31007cce4b801
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
