we pull this feat off by booting configure with a dummy spec. the proper
spec gets loaded subsequently.
note that it was necessary to move the cache loading after processing
the early checks (from which the spec handling is triggered). this is
just fine, as the cache is needed only by tests, which are forbidden at
this stage by definition.
Change-Id: I5120e25a8bf05fb8cc5485fd93cf6387301089aa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the qmake bootstrap uses some of the options, so the configures still
read config.opt for their own purposes, but the general handling is
entirely in the new system now.
Change-Id: I2c6c657d4da01c8d520ac74795454747bb224bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... instead of having (duplicated) code in the configures to create it.
Change-Id: Ia86b44021a024a969f5a49b7fb18d3d414869f93
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it was rather unexpected that this was done, entirely inconsistently
with how the rest of the configure parameters are handled.
Task-number: QTBUG-52266
Change-Id: I6e1d7a4fe1c85d6d64d465517b6be3f3cdda3359
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Show the tech preview license for commercial users if -confirm-license
is not set. This matches what the configure shell script is doing, too.
Task-number: QTBUG-55676
Change-Id: I69f5553ab53dfcdc14c200e682c024a6cebee8fe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the response is lowercased, so an uppercase L would never match.
amends c7c7cf636.
Change-Id: Idc796ec9a43bfd23452cd758100cbf1fb6fb252b
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The previously used regular expression failed for messages
in local languages, particularly for the French message containing
a non-breaking space.
Task-number: QTBUG-56388
Change-Id: Ie757617f1b3a31820d0ed274c4b157d544ac1ea6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
5971b88ecd introduced a regular expression
to parse the Visual C++ compiler version that failed to match non-English
output (e.g. German), which is produced by default on many systems.
Task-number: QTBUG-56388
Change-Id: Id0408ce31e827e7aa087d8e3dd83024cf09dac23
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add a qconfig-bootstrap.h, which contains all the defines required
to build the bootstrapped tools. This will be required anyway when
moving more code over to use QT_CONFIG(foo) instead of QT_NO_FOO.
Change-Id: I783d0aa0100b9190fe2d422bee4a95b05720aebe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
now that the bat file is responsible for displaying the help in addition
to bootstrapping configure, the exe file should not shadow it any more.
amends c027cffbe.
Change-Id: I5c8a52f59ff455575e646fae55cd214db98a3736
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This class provides a "type safe" way to compare and access operating
system version numbers.
[ChangeLog][Deprecation Notice] QSysInfo::windowsVersion() and
QSysInfo::macVersion() are deprecated and are replaced by the newly
introduced QOperatingSystemVersion.
Change-Id: I52b532de2e068ccf90faaa8342eee90c0a4145de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Backport a feature of the new configure system setting the
variables QT_CL_MAJOR_VERSION, QT_CL_MINOR_VERSION,
QT_CL_PATCH_VERSION similarly to the existing variables for gcc.
This allows for disabling optimizations depending on the compiler
version.
Task-number: QTBUG-55238
Change-Id: If2349b008c1049e2ab98a5c1160b244a6e8937a8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
implement it in configure.exe and fix it in configure.sh.
Change-Id: I30764f4cba4bad0f23bfb40ce7a2ca614e1afd71
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the function is (nowadays) only called when the condition is true.
Change-Id: I014f736c28c37b066a3f62e22f9002c025734386
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
write them to the top-level build dir, not the qtbase build dir.
the old files will be still used for a smooth migration.
Task-number: QTBUG-46974
Change-Id: I6eae678ffc7dfb921ecd9e9012e79e3b915ad3fa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of saving the files away and restoring them afterwards, use the
new and shiny discard_from() function to throw away everything the files
might contain.
strictly speaking, this is not precise, as the pris may also use *=, -=,
and possibly other operations which cannot be trivially undone, but the
purpose is essentially to discard the special outputs of some features
which may affect subsequent tests, for which this is sufficient.
as a side effect, the failure to load qmodule.pri is not fatal any more
(like for qconfig.pri), to save the pointless effort of ensuring that it
exists.
Change-Id: I07625b60c4f2e27b21206b2c16d24ab111737395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adapt configure.exe to use qmake to do most of the work of configuring
Qt. This unifies a large part of our configuration system between Unix
and Windows. configure.exe is now still doing the license check,
creating qconfig.cpp, building qmake, and not much more.
On the way, re-implement the still missing Windows-specific tests with
the new system.
The opengles2 vs. opengl-desktop conditions got a bit convoluted, as
Unix prefers desktop GL, while Windows GLES2 (via ANGLE). Superficially,
there is a circular dependency, but the platform scopes are supposed to
break it.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia1941f2c34b7f5bd4990a7673cd737361381c2e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
specifically, make configure.bat dump the text file (which got some
windows-specific adjustments).
incidentally, this change removes the need for including a pre-built
configure.exe into our source packages.
Change-Id: Ib3515c113f3602767554fe1493df226551a7bf10
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add [-no]-style-foo command line options for all widget styles, bringing
this closer in line with configure.exe. Add proper platform dependencies
and a configure test for the required uxtheme.h header on Windows. Clean
up and simplify styles.pri. Don't let configure.exe define QT_NO_STYLE_*
any more, as styles.pri does that locally anyway.
Change-Id: I81341f887a65b4e45e77380974eb79743acfad77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the code which they control is dead (due to not having been adjusted to
Q_WS_WIN disappearing).
Change-Id: I4b939e10d33b9da3a5642f303a84f297549ba522
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Qt will not build with -no-qmake.
Change-Id: I0fb5995d53fd3d6e4e5bd956929ce43432fb526d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
configure.cache is really kinda misleading.
the old name is still recognized for backwards compat.
Change-Id: I5ca461e99a0f9336ad70adfa5b8f6bb81ad73bbb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
it's entirely reasonable to extend the saved command line by new
arguments. note that these are not saved in turn.
Change-Id: I02c1a2b33e93c85b3a29c50de00c2e5334f6ef51
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
these options don't seem particularly useful (they were added in 2001
without any indication of the intended usage). maintaining multiple
static configurations can be best achieved with a script (outside the
build directory, which these options didn't permit to start with).
this obsoletes QTBUG-46690, which refers to these options.
Change-Id: I994c18481cd63d256bb7a6d1948c57f7bd480614
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
