configure already does it for qt itself, so it's pointless to ever invoke
in default_pre.prf.
to make the exclusion work during the makespec reload during early setup,
we pull ahead the restoration of CONFIG, hoping it won't cause too many
side effects.
another change in qt5 will ensure that top-level builds are also covered.
finally, configure tests also need an explicit exclusion.
that way, attempts to re-configure build trees of commercial builds
after the day of the first configuration do not fail anymore.
Task-number: QTBUG-63452
Change-Id: I42264f64d7621784d4d67bde885a8e501f5ca413
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
9fde78269 fixed overrides for library definitions, but failed to fix
direct overrides of variables from mkspecs, like QMAKE_LIBS_OPENGL_ES2.
Task-number: QTBUG-69176
Change-Id: I818acf25f581903c323847382ec6baab38b64330
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the sysroot flags need to be established even before setting up the
spec, because as soon as that happens, toolchain.prf will try to
determine the default paths and cache them.
this also fixes sysroot use in toolchain flag support tests, which run
(somewhat) independently from the toolchain setup.
Task-number: QTBUG-63483
Change-Id: I7be1540e766dac58fb16f63176aa8d2879b51ae0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the callback is specific to qtbase/configure.json, so it belongs into
qtbase/configure.pri.
amends d90db0f136.
Change-Id: I905f985e2d3d2e42c4587cbacdea8dc3eb09a5be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Do allow people to build from git using the Qt License Agreement 4.0.
The license agreement text is the same as in the installers, except
that some Unicode characters got normalized to their ASCII variants,
and things have been properly wrapped.
[ChangeLog][Licensing] The commercial preview license in the git
checkout has been replaced by the Qt License Agreement 4.0 text.
This makes it explicit that commercial customers of The Qt Company
can use the git version under commercial terms. However, support
is (still) only provided for builds from released branches of Qt.
Task-number: QTBUG-52222
Change-Id: I9e99b68e236a09610b798ba7a841e5a9d1ce6898
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this de-noises the code somewhat, and makes it possible to eval() the
code generated by $$qtConfLibraryArgs(), which we want to do later.
Change-Id: Ib6101c6745101801e34f8fab1ad6651e624130c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The configure unification accidentally changed it to /usr/local as used on
unix. Use C:/Qt again.
Task-number: QTBUG-61373
Change-Id: I758c639bdb07c97b55f990821e73a5135038f4a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... and make use of it.
it's a logical continuation of the 'arch' term, and will be used also in
qt3d's configure.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I940917d6763842499b18fffd1514c96889a0cc63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is necessary for WebEngine at configure time, to be able to query
which of the sanitizers was enabled in order to report unsupported
combinations.
Task-number: QTBUG-64726
Change-Id: I72f8efe4bed3e14114f885bdae16650f1f23b24b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The qtConfAddNotice was a typo, so this note was missing from
config.log and the build would fail with no explanation.
Change-Id: Iae22f92c1ba6bdf96d41a7cc608b9aedd6863b1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since the x86_simd/main.cpp file already has all the source for each and
every test anyway, just reuse it.
Change-Id: I938b024e38bf4aac9154fffd14f779f450827fb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This has two main benefits:
1) introduces a qmake CONFIG we can use in .pro/.pri/.prf files
2) removes the need to keep an up-to-date list of which compilers
support the feature
The test is implemented as trying to compile every single SIMD test we
currently have, but without passing the -mXXX option. The reason for
trying all of them is that some people may have modified their mkspecs
to add -mXXX options or -march=XXX, which could enable the particular
feature we tried, resulting in a false positive outcome.
Change-Id: I938b024e38bf4aac9154fffd14f7784dc8d1f020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When QMAKE_* variable assignments were passed to the configure line
they would cause the current contents of the private pro output to be
overwritten. This would cause anything added to it before the QMAKE_*
variable assignments to be parsed to be lost.
Change-Id: Idcb8cad5f07cbb96b4da204384f5618b95b375b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
there isn't really a point in doing strict shadow builds of them, and
it complicates stand-alone building of sub-projects (because it points
below the build root).
Task-number: QTBUG-58372
Change-Id: Ia3bde3826baac44749b27452fd4aeb9491ecb94e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... and rename those determined by toolchain.prf to QMAKE_* (this was
already the case for the newly introduced msvc and icc variables).
this restores the ability for user projects to query the toolchain qt
itself was built with, which is necessary for compatibility checks.
in fact, we may do such validation in toolchain.prf itself at a later
point.
Change-Id: I35f4c393c5e4e0fe987c0844714b7a8f8687c24e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
$$QMAKE_HOST.arch isn't very well defined for ia32 - on windows it's
x86, on linux it may be anything from i386 to i686. test for != x86_64
instead.
Task-number: QTBUG-61044
Change-Id: I8f3267b404fffbf479d87bee2e8ee8c6cd404b50
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it can be (and usually is) empty (if the option was not used), which
would make it disappear from the command line.
Change-Id: Ic682e92a0d20cf849fade8449ebd79a5aa424d21
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Amend commit e6bf237669 to correctly
cache the abi in config.cache and set QT_BUILDABI to the correct target
ABI when cross-compiling.
Task-number: QTBUG-60441
Change-Id: I4ebfce9d6266be2a3225034fbf3aff08e7fdc5d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
instead of calling eval() on the entire output, loop over it line by
line, because:
- the first line is a message, not a variable assignment
- eval() can process only one statement at a time
Task-number: QTBUG-60255
Change-Id: Idca652910c8f2c852372d486c51c8554bc708dcf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is needed to encode the correct ABI into the generated qml caches.
It is identical with the return value of QSysInfo::buildAbi().
Change-Id: I2d581b22326da4220f412ab4f517156f4ba31897
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
writing $$PWD (via $$QT_SOURCE_TREE) into the new bin/qt.conf would
potentially change the path compared to the value originally written by
the configure script, as $$PWD is canonicalized. this in turn would
break the magic for delaying the loading of toolchain.prf.
so instead just write out the perfectly fine current value of
$$[QT_INSTALL_PREFIX/src].
amends 169a40d51, thereby fixing 6834d0eec on windows.
Task-number: QTBUG-58816
Change-Id: Ibbd44df8f3c825a97d9f4acb869e44c93acb835b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The minimum version of Xcode that we support is 5.1 (based on Clang 3.4)
Change-Id: I536c32a88bff44dab37afffd14a11f709fb25169
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
don't fail to set up cross_compile early enough. otherwise, we'd
populate the cache for target builds with data for the host.
amends 6b8666c7 and 5060740f.
conversely, pass on extra flags to configure tests when not cross
building.
amends d8be8110 (and 2c5eb3e6).
Task-number: QTBUG-58556
Change-Id: I531d71e06204a0b17ae6dabf017a52e0f2efd9a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The patch fixes a number of bugs in code, and removes dead logic
clarifying that MIPS DSP, like ARM NEON, has no runtime detecton.
Change-Id: If2f4eea68da5b2eaa80b8e9c8258206d8c1b7173
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in cross-builds, toolchain.prf was loaded before CROSS_COMPILE was set
up, leading to caching of possibly nonsensical values.
this change also necessitated that msvc-version.conf is loaded only when
toolchain.prf is, which is best done by loading the former from within
the latter. that seems quite appropriate in the first place.
Change-Id: I62577e827a75e335e03df016bd1aa1932643fd6c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
instead of forcing an early load and discarding its contents again
before they could cause harm, trick qmake into not loading it at all.
Change-Id: I672ca9de362b1f23bf5cfea007053570c8534fc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
turns out that just appending builtin-qt.conf isn't a good idea:
executable-editing tools (objcopy, prelink, etc.) will happily drop the
"attachment".
a safe method would be adding a proper section to the executable, but
there doesn't appear to be an objcopy equivalent in msvc, and using
entirely different methods of embedding the file with different
toolchains seems like a rather bad idea.
so instead go back to the old method of building qmake with a generated
qconfig.cpp. of course, as said file is now created by qmake itself, we
have to compile qlibraryinfo.cpp a second time, and link a second qmake
executable.
Task-number: QTBUG-57803
Change-Id: I9e232693550aa870cec154e49cc06add13017cc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
now qmake is the last command called by the unix configure script.
as it happens, this was already the case in the windows script, but only
because it didn't print these messages at all, which it implicitly does
now.
another effect of this is that repositories outside qtbase will now also
get the installation note in modular builds, which makes sense.
Change-Id: I567146936b216185a8e0f61e445222215608bf13
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this makes it consistent with the determination of the default
include/library paths. this makes sense, as it's possible to switch the
sdk/toolchain after building qt (within reason).
a side effect of this change is that for compilers which emulate other
compilers, both the real and the emulated version are now made
available.
Change-Id: Icfcc672c0d2e3d1b5e622993c366063d70ad327c
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this fixes the x-build for raspberry pi, as that spec refers to the
sysroot.
the path setup doesn't require the device options to be in effect yet,
so it was sufficient to move the existing spec reload to a later point
in time.
Change-Id: Idc521aa13ff441931e954c7c9004472cf7061ee1
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
initially, the idea was that QLibraryInfo would receive a
pre-sysrootified ExtPrefix from the builtin qt.conf. matching this
against the sysroot would then tell us whether to sysrootify the Prefix
from a "regular" qt.conf as well.
however, this would have lead to some major ugliness and inconsistency
between the code paths, so i changed my mind.
unfortunately, i failed to adjust the remaining code, leading to
169a40d51 entirely breaking sysrootification ...
the proper (and nicely consistent) solution is to introduce a
SysrootifyPrefix key to qt.conf. this is user-accessible as well, so as
a bonus it is now possible to adjust the setting at qmake installation
time. incidentally, this omission was the last thing that prevented
using the same qmake host build for any imaginable configuration of the
same qt version ... i think.
Change-Id: Ic0eebf21f93651f6374628c0ad8b206d696a4a7e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
we pull this feat off by booting configure with a dummy spec. the proper
spec gets loaded subsequently.
note that it was necessary to move the cache loading after processing
the early checks (from which the spec handling is triggered). this is
just fine, as the cache is needed only by tests, which are forbidden at
this stage by definition.
Change-Id: I5120e25a8bf05fb8cc5485fd93cf6387301089aa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
its only consumer is qt_tool.prf, which is an internal api.
Change-Id: Iae90b079c5af60efad2ded70d6ea481212e5353a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the qmake bootstrap uses some of the options, so the configures still
read config.opt for their own purposes, but the general handling is
entirely in the new system now.
Change-Id: I2c6c657d4da01c8d520ac74795454747bb224bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adds platform and CPU features to the reported build type,
matching the format of the old configure.
Started-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I6d93ec7416b38684da51af5238a5cf537810b21d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
now the callbacks don't need to re-export the designated file contents,
which improves the abstraction and removes some boilerplate.
Change-Id: Ifa50313155fc96762025e2610b810ebb71daa373
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The crossCompile test checked only if platform and xplatform are different
(which is the usual case), but in yocto builds cross compilation is done
by setting both platform and xplatform to the same target mkspec and using
host tools from -external-hostbindir.
Change-Id: Ib4ae3975a52196d9c0ad52b5b5e9ccd7c1bfe883
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
it's a bit pointless to state "(with debug info)" also for the default
build mode.
Change-Id: I99563c424752c735a3157776ef4fe5252ebd3900
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the regex didn't match the actual output ("icpc (ICC) 17.0.0 20160721"),
and the code failed to concatenate the lines (broken in 492d7d14fc, as
for clang).
but using -dumpversion (as we do for g++) is more elegant anyway, so do
it instead.
Change-Id: I328bbfab9c08d6e660c3f1ec51554d9f877b8f66
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Concatenate the multi line output from clang into one line before parsing
it. This got broken in 492d7d14fc.
Change-Id: I282d69932c5851f229213d7ef1ca6a78cd56c8c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the spec (possibly) provides QMAKE_PKG_CONFIG. PKG_CONFIG is dynamically
determined on use.
Change-Id: I45b7f4eddeff5d28539021472ef9036dd397d61e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... and use that variable in qt_configure.prf to find the pkg-config we
detected during qtbase configuration.
This is required for modules outside of qtbase being able to use
pkg-config to configure external libraries.
We do not use the PKG_CONFIG variable any more, as that interferes with
the $$pkgConfigExecutable() function, which some Qt modules still use.
Change-Id: I8886a266207e04301009fe8207c16b02c5455b2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
"description" suggests something slightly longer.
this may seem like a gratuitous change, but the upcoming replacement of
the old feature system clarifies makes it seem much less so.
Change-Id: Ibe702e01cb146b59127bf1f990b4acaef1c61d55
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is required to do the modularization of those
features properly.
Change-Id: I384aff20274e795aa70483980f0ef25309328800
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Run cl.exe /? and extract version from header line printed
to standard error.
Change-Id: Iecf18f1b0f94cc1d51add7021d80772784e0f953
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
test callbacks MUST NOT act as outputs, ever.
this went unnoticed so far, as it would become visible only with
configure -recheck.
Change-Id: Idd923097b4b2790ef4fe8a6d430db4b62851801a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
as these tests do nothing but validating the command line, caching the
result is more confusing than anything else.
also make the tests silent, so they don't clutter an otherwise fully
cached configure run.
Change-Id: Ifc3d65278769b36a056650f077fd6274a7e192e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of saving the files away and restoring them afterwards, use the
new and shiny discard_from() function to throw away everything the files
might contain.
strictly speaking, this is not precise, as the pris may also use *=, -=,
and possibly other operations which cannot be trivially undone, but the
purpose is essentially to discard the special outputs of some features
which may affect subsequent tests, for which this is sufficient.
as a side effect, the failure to load qmodule.pri is not fatal any more
(like for qconfig.pri), to save the pointless effort of ensuring that it
exists.
Change-Id: I07625b60c4f2e27b21206b2c16d24ab111737395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is just an excuse to let build failures slip past CI, as has
happened and been fixed recently.
Change-Id: If4356eaced0f90c7c455b21cc7676b0c9b7b1e27
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Adapt configure.exe to use qmake to do most of the work of configuring
Qt. This unifies a large part of our configuration system between Unix
and Windows. configure.exe is now still doing the license check,
creating qconfig.cpp, building qmake, and not much more.
On the way, re-implement the still missing Windows-specific tests with
the new system.
The opengles2 vs. opengl-desktop conditions got a bit convoluted, as
Unix prefers desktop GL, while Windows GLES2 (via ANGLE). Superficially,
there is a circular dependency, but the platform scopes are supposed to
break it.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia1941f2c34b7f5bd4990a7673cd737361381c2e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add [-no]-style-foo command line options for all widget styles, bringing
this closer in line with configure.exe. Add proper platform dependencies
and a configure test for the required uxtheme.h header on Windows. Clean
up and simplify styles.pri. Don't let configure.exe define QT_NO_STYLE_*
any more, as styles.pri does that locally anyway.
Change-Id: I81341f887a65b4e45e77380974eb79743acfad77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so far, each library was distributed over a test and (optionally) a
'library' output of a feature. this was conceptually messy and limiting.
so instead, turn libraries into a category of their own.
libraries now support multiple properly separated sources, which makes
overriding them a lot saner. sources can be conditional to accommodate
platform differences.
as an immediate consequence, move (almost) all library references from
the config test projects to the json file.
a few tests were excluded, because they are doing somewhat magic things
that should not be handled in this bulk change:
- freetype: .pri file shared with actual source code
- clock-gettime: -lrt is conditional, and there is a .pri file which is
shared with actual source code
- ipc_posix: -lrt & -lpthread conditional
- iconv: -liconv conditional
the multi-source mechanism is used to make a variety of tests work on
windows, where the library name differs from unix (and sometimes between
build configurations). some tests still needed minor adjustments to
actually work.
on the way, fix up disagreements between manually specified libraries
and pkg-config lines (affecting several xcb-related tests).
Change-Id: Ic8c58556fa0cf8f981d386b13ea34b4431b127c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
never use $$system() directly, but instead use qtRunLoggedCommand() with
a newly introduced out parameter. that way we can print the command's
raw output, which should help debugging configure problems.
additionally, we now consistently check the exit code of all executed
commands, which should avoid confusing followup errors.
note that as a side effect some calls now use $$system()'s 'lines' mode
instead of the bizarre default splitting mode. this has no impact on any
of the cases, which is why it is basically a negligible style change at
this point.
however, qtLog() gained support for arguments with more than one element
to accommodate this.
Change-Id: I40d907e27de32dfec8d6086ce7d93fc4be18241f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is clearer, and avoids potential false hits if the target OS
is changed without cleaning the build dir first.
Change-Id: If88f3c555740dc9ff559c172b4b005ed8bfb60ae
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
standardize on the fields in the json structure being single strings in
which separate elements are quoted and space-joined (because quoting
is unlikely to be necessary in the json file itself, and this format
avoids the visual noise of array handling).
the quoting itself is expected to be qmake-compatible, which is assumed
to be the case for the output of pkg-config (it's actually shell-quoted,
but that's the same except in some not-so-relevant corner cases).
Change-Id: Icc1d7abc02c449fa759d9714bc5e56e2b8809585
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Now that -l and -fw options are gone, using a combined EXTRA_LIBS
makes no sense anymore and only complicates things.
Change-Id: Ic12bf482f3bed041aff7f0891f008b1f34ae2b4d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These arguments were nonsensical, as they would lead to every single Qt
module linking to those libraries. This was probably some left-over from
old times, when Qt was just a single library.
Change-Id: I0343a6df270fd0d2efa5333ba4e457670f5d0910
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not a feature that should get propagated to other
configure runs, so simply hardcode support for it.
Change-Id: Ieb1c33243154b3583e91061d3592d7e87c36f402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
But without a version number for now.
Change-Id: I0a976ba463cff6812faf85de03a6ad003ea582f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
