It fails randomly on Windows, possibly due to timing issues.
Change-Id: I0ef74f203455eb4ea8aeee4c8fc9bf1fbf6fb8ff
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test selectWordsFromStringsContainingSeparators() duplicated
in boths tests caused tab and Nbsp characters to be output to the
log, which upsets editors.
Use an array of ushort instead of a wasteful QStringList and
output the hex codes for the unprintable characters.
Change-Id: I08724268f376b4c0da492b4109570e44f7d4a3fb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Whenever a regular QWidget contains a child render-to-texture widget
(like a QOpenGLWidget) that is opaque (attribute
Qt::WA_OpaquePaintEvent is set) and completely covers the parent
geometry, the child widget would not be shown.
This happens because QWidgetBackingStore::doSync contains a check to
see if an opaque child completely covers its parent, in which case it
does not draw the parent, and only draws the child.
This is an issue if the widget is actually a texture-based one, because
for it to be seen on screen, the parent widget has to be redrawn with a
proper blending mask, so that the rtt widget gets properly composed
into the place where the mask is.
The fix consists in keeping the parent widget being marked dirty, in case
it has an opaque texture-based child that completely covers it. This will
force a redraw of the parent widget with a proper blending mask.
Change-Id: If1feec04b86bff2c49158b8d72f175cec252dea1
Task-number: QTBUG-52123
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
There is nothing guaranteeing there will be a paint request after
resizeViewportFramebuffer() is called. However we must not be left
with a framebuffer with uninitialized content. So trigger an update.
Include also a half-hearted autotest. QOpenGLWidget (or QGLWidget)
viewports have not been autotested at all. Try to verify that it
is functional at least, even if we cannot check the actual output.
Change-Id: I34d78fe32e94c39dad919216b5a4f4bb2aea3cc2
Task-number: QTBUG-52419
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
This has been fixed in 5.6.1 but we can afford the extra test
to guard against regressions.
The setup for this test is two menus, one parent of the other.
The submenu is tearable. We open the parent menu, open its
submenu and then move the mouse cursor straight over the
submenu's tear-off area. The submenu should stay open even
after a short delay.
Change-Id: Ia8ad326d78dde31b6dd91b0ebacf0db1898715d4
Task-number: QTBUG-53068
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This patch reduces paint events by removing code which sets native
widgets dirty in QWidgetWindow::handleExposeEvent. Native widgets are
also marked dirty in QWidgetPrivate::drawWidget, so it is enough for
proper painting.
This restores Qt4 behavior when one resize means one repaint for native
widgets. Without this patch the native widget is marked as dirty on
every expose event, so one repaint is from syncBackingStore and second
(or more) is from marking the widget dirty explicitly.
This patch improves performance of native widgets and it also reduces
locks when paint event is v-synced, e.g. on OpenGL swap buffers or on
any other technology like VDPAU, VA-API, etc.
Added autotest for checking number of paint events for native widgets.
Task-number: QTBUG-50796
Change-Id: I4e1649069e2e73d15b038fd1834d0551915252ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QMenuBar now receives a parent changed event for each of its parent,
grand-parent, ... This fixes a crash caused by an invalid QWidget
pointer and makes sure the keyboard shortcuts events are relayed to the
menu bar in all parenting/re-parenting cases by installing an event
filter on each parent
Task-number: QTBUG-53205
Change-Id: I419e6cbc52e28a67fb08a848a7161b4cb8ae4ae5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Introduce a function going up the widget hierarchy determining a QTransform
for mapping the coordinates applying the transformations of any QGraphicsView
instances found. In mapFromGlobal(), use the inverse of it. This fixes the
case of widget hierarchies embedded into QGraphicsView with transformations.
Increase fuzz in the tests due to float rounding errors.
Task-number: QTBUG-41135
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Task-number: QTBUG-52507
Change-Id: I507e0bccd546250fe9c2d1b74ef38657d61490b4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The QFontDialog test will currently fail for some PCF bitmap fonts
because the list of smooth sizes it uses to populate its size list
contains unsupported sizes. We work around this by adding
QEXPECT_FAIL when we detect that the failure is going to happen.
Task-number: QTBUG-46056
Task-number: QTBUG-53299
Change-Id: Ia665cca220f3622405d1a2336e8d587545cccbc6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Create parent nodes with the corresponding paths, not with
the absolute path of the child node. Otherwise we will get
incorrect QFileInfo at least in the following case:
QFileSystemModel model;
model.setRootPath("/usr/bin");
QModelIndex idx = model.setRootPath("/usr");
qDebug() << model.fileInfo(idx).absoluteFilePath();
Without the fix it prints "/usr/bin".
It's a regression triggered by 61cefb2f7a
(De-inline QFileSystemModel::fileInfo() and implement it efficiently).
Change-Id: I3b4e5f5b256711e27ad50824eaa8492dbc096808
Task-number: QTBUG-51586
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test passes on OS X now.
Task-number: QTBUG-8941
Change-Id: I7b57dc30ede7c1ed0bcb8bacb458ea56f222d987
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Sheets are no longer transparent on newer OS X
versions.
Change-Id: Iaaed5aea9c9b130a5d991acd36717b76c3927cfb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The Qt 5 unified toolbar implementation does not move
the toolbar to the “non-client” area. This test is
no longer relevant.
Change-Id: Ia32de2260f8ef400a0dc5acf3e5e3ff59083657a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
On some X11 window managers, 2 events are received when
hiding/reshowing and activating the window, which became
apparent after 91f536dd71.
Change-Id: I66fdc4f69d87ac898b18d5dfddc957617bb8f916
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The old code sometimes made incorrect selections when rows or columns were
hidden or moved. It used logical top left and bottom right indexes to create a
selection rectangle. However on moved or hidden cells a wrong rectangle was
made. This fix calculates a simple rectangle without hidden cells and makes use
of the row/column select functionality provided by the selection model, to make
the right selection.
[ChangeLog][QtWidgets][QTableView] Fixed a selection bug when rows or columns were hidden (QTBUG-50171)
Task-number: QTBUG-50171
Change-Id: Id186012af26da7b2051ff5eb1c13e6b7494cca77
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This patch QSKIPs all tests that:
- take to much time sitting in some QTRY_VERIFY or similar before failing
- result in 'not in fullscreen mode' warning (with PASS) - thus completely flaky.
- Where previously determined to not apply to OS X using QT_OS_MAC
The intent is to make the test run-time more reasonable,
both when running the test locally and on the CI system.
Reduce the BLACKLIST - to avoid a 'double elimination' the tests that are skipped now,
should not be BLACKLISTed so that we fix them for good.
Task-number: QTBUG-52974
Change-Id: I34dc2010d0debc6b5b99f2375a6da902b7a17b29
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Q_OS_DARWIN is the general replacement for Q_OS_MAC,
but most/all of the MAC sections in this test are
OS X specific.
Change-Id: Ic54af9d3dce1e1952a57e15b74acdedf2af60c79
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Fix regression in a7b0cb467c which caused
it to be hard to start scrolling at the ends of a scroll-view if using
fine grained scrolling events.
Change-Id: I55f3210150b993281545c3ad5a7356d892fa30b5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The widget is hidden, reshown and tested for active window, which
is flaky. Add a call to activateWindow() which increases
the chances of it becoming the active window should another window
appear.
Change-Id: Ibbecdbc43e2ac9638aec497c47fffaaffa1855af
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Pushing the mouse rapidly to the top left corner causes KDE / KWin to
switch to "Present all Windows" (Ctrl+F9) mode, showing all windows.
This has been observed to be triggered programmatically by
QCursor::setPos(0, 0) if there is no other window beneath and apparently
depending on the perceived mouse "speed".
Suppress this by using the bottom right corner for XCB.
Change-Id: Id18d2f45a095ed4d4f365f010cf45a20b0d9435e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Use the correct parent path for the renamed file when creating
QFileInfo. It must be a path to the parent directory, not to the
root directory of the model.
Modify tst_QFileSystemModel::setData() to test renames in subdirs
of the root directory of the model.
Change-Id: I69d9e3a937616857a81617791ed118af3f6eea05
Task-number: QTBUG-52561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Return pixmaps with device pixel ratio similar to QScreen::grabWindow(),
cf c0963486ce.
Adapt kernel tests accordingly.
Task-number: QTBUG-52137
Change-Id: I9ce276d5e2d87ae0d39c8639267d1ac283fed854
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The old code incorrectly calculated visual region for a selection (specified by
QItemSelection object) in case of reordered / swapped rows or columns. It used
the leftmost and rightmost (upmost and downmost for vertical mode) logical
indexes directly. However some middle logical index (in case of reorder) may be
the leftmost or rightmost visual index. In such cases the repainting didn't
work properly. This fix first checks whether reordering / swapping is in use.
If it isn't (ie visual=logical) we use code similar to the old code. Otherwise
the new code scans all selected logical indexes, translates them into visual
ones and gets the correct leftmost and rightmost indexes.
[ChangeLog][QtWidgets][QHeaderView] Fixed a repainting issue when items had been reordered.
Task-number: QTBUG-50171
Change-Id: If6afabebf445cf32a8e0afe262b6ee149e7c4b2b
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
After 909d3f5c7, private families will not be shown in user interface.
Task-number: QTBUG-41318
Change-Id: I15ae77cacd2a27c9db4b1a8ffbb582416258988c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Ensures that QStyleOption is correctly initialized.
This prevents possible styling issues due to
QStyleOption's reporting version 0, see qstyleoption_cast.
This enables users to handle more cases in their QProxyStyle.
For now the test is only used for QCommonStyle.
Change-Id: I768db00b12b46890343fffe44e4f562762e9cf80
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
The old code converted QRectF into QRect when applying the offset. Change
the offset point to QPointF and change the conversions accordingly. Add an
autotest similar to that of QPlainTextEdit.
This minimizes rounding errors and prevents conversions since
the input method logic mostly uses qreal.
Task-number: QTBUG-51923
Change-Id: I0c2f80ccae028d8bbbb97ec603f8782f69959c76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Determine offset point to similar to QTextEdit::inputMethodQuery()
and add an autotest.
Task-number: QTBUG-51923
Change-Id: I8232eb348063e2cd95d0632fe74a6eb30c897eda
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Subjects each *.png file that matched grep -law "sRGB" to:
pngcrush -ow -brute -rem allb -reduce
(Two needed -force but did get smaller.)
Change-Id: Ia030f0bc1d3617ba716bcc26677ff919ef58423c
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Its currently not possible to style the arrows with QCommonStyle because
drawPrimitive from QCommonStyle is called instead from the proxy.
Change-Id: I910b13df110601cb18578bc16edfa5ddaa17bbd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The most visible problem is that changing selection model didn't update()
the view, resulting in the old selection/current item still being drawn.
In general trigger the handlers for when the selection/current item
changes.
Change-Id: Ib3b2ad70412e6a21a182d4c173e617710bcc630d
Task-number: QTBUG-50535
Reviewed-by: Stephen Kelly <ske@ableton.com>
Set input method attribute to be aligned with read-only
value in QTextBrowser initialization
Task-number: QTBUG-52071
Change-Id: If0e64bf09e2a2d505ed66fcbfb8cd12ae39844d3
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
This issue has been solved some time between 5.6 and 5.6.0.
We just make sure to protect against further regressions.
Change-Id: Ic3fdad901ed5f36792ae04b3d65047da95eea668
Task-number: QTBUG-50561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
tst_qtabbar uses fixed values to check the minimumSizeHint and it fails
with screens that have a higher resolution. The test still uses the
default values, but now in the beginning it creates enough tabs so that
it goes over the default.
Change-Id: I3f891d2661288d7fad50ad522d73f634b3e91958
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Tested on the Ubuntu 14.04 VM. The test didn't fail anymore with
2000 test rounds
Change-Id: Ic12c60e5ebf9c234358a6983bf87fa0a88d7886e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
A receiver of TouchUpdate and TouchEnd events is determined either
as a widget which has an implicit grab for the touch point or as a
visible widget if there are no implicit grabs. The events are sent
if the receiver has accepted TouchBegin event or if it is subscribed
to a gesture. Before sending the events to the widget they are
delivered to the gesture manager. Thus, in order to detect gestures
for the widget, it must own an implicit grab or be a visible widget.
It can happen that the parent widget is subscribed to a gesture, but
doesn't accept TouchBegin event, as in the case of QScrollArea. Then it
will not get an implicit grab and gesture detection will be impossible.
Activate an implicit grab for such widgets. Also don't send TouchUpdate
and TouchEnd to them, because it's against the documentation.
Task-number: QTBUG-43277
Change-Id: Id767583991def6d76c48ad15eb39af822cad115d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Remove the member variable and instantiate only where needed
on the stack to prevent it from interfering with windows created
by other tests.
Remove flag Qt::X11BypassWindowManagerHint as it does not seem
to have any effect.
Task-number: QTBUG-51516
Change-Id: I3bf88bf148f365c57aaf989671f8b9c3c3f0d8e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Given the flakyness of cursor positioning, loosen the check to only verify
that the cursor is outside the window. The hint is only active on Windows
depending on a system setting.
Task-number: QTBUG-51516
Change-Id: I474d251cc41e68f182baf8dba84eaf38d914d7ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The coordinates need to be scaled before calling QPlatformScreen::grabWindow()
On return, set a devicePixelRatio on the pixmap.
Adapt the QWidget test to scale the grabbed pixmaps.
Fixes pixeltool displaying the wrong part of the screen when High DPI scaling
is in effect.
Task-number: QTBUG-46615
Change-Id: I12de7df0da669230cf0fae74f4a42d43f061d5ff
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
First-level context menu grabs the mouse, so all mouse events are
delivered to it. This menu passes the mouse events to submenus. Any
platform delivers mouse enter/leave event differently when window is
grabbed. This patch unifies event delivery to context menus - it can
block some unwanted events and it emulates fake events if necessary.
This patch can reduce duplicated events and can provide proper enter
or leave event to additional widgets in the context menu. It can also
prevent submenu from unwanted close on Windows and X11.
Added autotest.
Task-number: QTBUG-45565
Task-number: QTBUG-45893
Task-number: QTBUG-47515
Change-Id: I7dd476d0be23afa34e947e54aef235012d173dcf
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This test fails in distros using GNOME due to
most likely bad usage of native dialogs.
Task-number: QTBUG-51148
Change-Id: I6e539b429266e298ce413565e0191bffa7fbe6bc
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test was made insignificant for Windows in change
f3939d943e. As the failure is not
reproduceable locally, re-enable it. Also split apart the test.
Task-number: QTBUG-51149
Change-Id: I6a06bdf2369bc3bdbc73dfe4fa416e9d644f8b01
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Ensure that the window is active (as otherwise
QMdiArea::activeSubWindow() returns 0) and add a QTRY_COMPARE.
Change-Id: I7edb01d43fd2635864266614ef9a0e844f76edbf
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
