QTableWidgetItem uses additional enum flag ItemIsHeaderItem which has
the same numerical value as ItemFlag ItemNeverHasChildren.
This causes conflict since the user can set the latter flag using
the setFlags, while the ItemIsHeaderItem is only used internally
to mark header items.
Remove the additional flag and use boolean instead to fix the conflict.
Pick-to: 6.2 6.5 6.5.1
Fixes: QTBUG-113209
Change-Id: Icff549c7e452d9f84575a524361719204817274e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends ca15f650a1, after which scrolling
right to fill any gap might have resulted in overshooting to a negative
scrollOffset.
When we scroll right to fit the current tab, then we never want to end
up with a negative scroll, so clamp the result accordingly.
Augment test case accordingly. Since some styles align the tab bar in
the center, replace the calculation of the scroll offset with access to
the private data member (which inverts the sign when compared to the
calculated value).
Task-number: QTBUG-113140
Fixes: QTBUG-113376
Pick-to: 6.5 6.5.1
Change-Id: Ibdc6686b9dbd41b1ae3560e2227fa121d9b20e18
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
If there is an effect on the selected item we want to show it,
but if there is no item to highligh we just close the combo.
Fixes: QTBUG-113311
Pick-to: 6.5
Change-Id: I287af75d27e6f6ff969e4706e16cc8c4812129ea
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The native style may not match the program style and it
makes sense to give an option rather than forcing native style.
Before it could only be done with setting AA_DontUseNativeDialogs
on the app, but it is reasonable to use native file dialogs and
Qt styled messageboxes - and it is extremely cumbersome - especially
since messageboxes often can start save dialogs.
It can look a bit strange that these introduced options has just one
option (DontUseNativeDialog) and four functions, but this way it works
similar to QColorDialog, QFileDialog and QFontDialog.
[ChangeLog][QWidgets][QMessageBox] Added options functionality to
QMessagebox. The currently only option available is DontUseNativeDialog.
Change-Id: I70282fcfaa66f245f7e679b8897c607bcaff333f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTabBar lays out the tabs when the bar's size or content changes,
often lazily. This should not change the scroll offset of the tabbar,
which is controlled by the user, or at most when a tab needs to be made
visible (e.g. when it becomes the current tab).
Move the logic of updating the scoll offset into the makeVisible
function, so that the scroll is only adjusted to either leave no gap
between the last tab and the right edge of the widget of there is still
a scroll; or to reset it to 0 if there is enough space for the entire
tab bar. Since layoutTabs does show and hide the scroll buttons, we
cannot skip this when the buttons are invisible. However, the
normalizedScrollRect helper now needs to return the entire widget rect
if there are no visible scroll buttons.
Add a test case that simulates the previously broken behavior where
the scroll got unnecessarily reset to 0 when resizing.
Fixes: QTBUG-113140
Pick-to: 6.5
Change-Id: Ic19fbb82821ea09cc5e7646dcbce3aa7607909c2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
b1802a164b added handling for a parent to
become focus proxy of a child. The respective 'else if' branch didn't
check whether setFocusProxy() was called with a nullptr argument.
This patch adds the missing nullptr check.
It also adds functionality to tst_QWidget::tabOrderComboBox() to test
the removal of a focus proxy, as well as the complete removal of an
element from the focus chain.
Change-Id: I4cb865b9ac4497fc5e2595910738fb77694f5837
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a parent became a new child's focus proxy in an existing focus
chain, the child was appended at the end of the chain.
That leads to broken tab order, e.g. with a QComboBox which became
editable after a focus chain has been set.
This patch captures the case and insertes the new child after its
parent in the focus chain.
A corresponding test function is added in tst_QWidget.
Fixes: QTBUG-111978
Pick-to: 6.5
Change-Id: I3a426c0560fa830b7b7ffead54f26dd0adef499f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Task-number: QTBUG-109779
Pick-to: 6.5
Change-Id: I21ecd4910ba3d699e44d9ea922093e98e0b8a335
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The stepIntoDSTGap() hour cases were already conditioned on hour > 0,
explain why. The month and year tests need similar checks for kindred
reasons; add and document those checks.
Pick-to: 6.5
Change-Id: Ibcb69449fcd572ee94306a805fd680e9b5155322
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Given that QDTE only supports local time and UTC, using Europe/Oslo as
zone was disconnected from reality, especially as various QDateTime()s
were constructed using local time. Use the system zone.
Pick-to: 6.5 6.2
Change-Id: I95b3a6a6acf9ffc2b8c7f05d3dd9440ff173abfe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test wants to start shortly after the transition, then step an
hour backwards, into it, to check we land safely on the other side.
However, it assumed the gap witdh was an hour, which is not reliable.
Use the gapWidth already used in computing springGap instead.
The -3590 seconds in the result time is correct, as it's the ten extra
seconds we started beyond the gap, minus the hour we step backwards.
Pick-to: 6.5
Change-Id: I4399af7e54a60bd55ea51d054d3cd2ecfcb0e354
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The "{forward,back} to %s, correct to nearest" tests were reporting
the time of the transition as %s but, like the jump test, were using
the middle of the gap as the time to set. So compute that mid-time's
string once and use it in all three test names. Also renamed some
local variables to accommodate the new one for this text.
Pick-to: 6.5
Change-Id: Ic6c40c470fc74ae8bcfc0dc9d1596af06318a883
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Although the zone's daylight time offset is usually the width of the
gap, it's possible the transition is (or includes) a change to
standard time; so determine the actual gap width by comparing the
difference between time a day earlier and later to the usual duration
of two days. Also skip the test if the transition isn't really a gap.
Pick-to: 6.5
Change-Id: I56e381c9f74cfa1806d43b3ed5e4637436ebdf57
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The function is passed a zone to work in, so setting the transition to
local time made no sense; set to the given zone's time, instead.
Pick-to: 6.5
Change-Id: Icaa0955fe5fcd5bc257322afcb7e25e932dedd1b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
QMenu::exec opens a blocking loop, which is problematic for webassembly.
Replace with QMenu::popup, and reset the down-state of the button when
the menu is about to hide. QMenu emits aboutToHide immediately before
existing the event loop in the hideEvent override, so the timing is the
same.
Change-Id: Iccb418d10fcb25f6ad1f73f9cdce6ea6581bd73b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The "two widgets at a time" API to set the tab order is awkward and
easily misused (as the documentation explicitly explains). Add an inline
overload that takes an initializer_list, and call the existing function
for each consecutive pair of widgets in the list.
Add documentation with snippet, and a test.
Change-Id: I8e6f14a242866e3ee7cfb8ecade4697d6bdfb4d4
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QListView generates a move, when an item is dropped directly behind
itself. This causes unexpected behavior, e.g. item widgets getting
discarded.
This patch prevents a move from being generated in that case.
It adds an autotest to tst_QWidget, to verify item widgets and item
data do not get discarded in case of a no-op drag&drop.
Fixes: QTBUG-100128
Pick-to: 6.5 6.2
Change-Id: I02a755320a7b71dad218293c9c94c88da6507423
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test can collide with a 1960-01-01 transition in some zones, so
move it to Jan 2nd to avoid that.
Pick-to: 6.5
Change-Id: I5286cadc0de0b66283253b0ac736f23a2add0c8f
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The member variable indexBeforeChange is member-initialized with -1 and
changed to the current row, if a valid index is set.
It is used to check, if the model has been reset to an empty model
and/or the index has been invalidated. The result is used to decide, if
the currentIndexChanged signal is emitted or not.
If a combo box had a valid index and it is invalidated afterwards
(e.g. because the combobox has no more entries), indexBeforeChange is
not reset to -1. The redundant signal emission is therefore prevented
only the first time.
This patch resets indexBeforeChange if the index is invalidated or the
last item is removed from the combo box.
It also adds a no-op check to tst_QComboBox::currentIndex.
The test data sets "check that setting the index to -1 works" and
"check that current index is invalid when removing the only item" check
the respective use cases.
As a drive-by, variable names and QObect::connect syntax have been
cleaned up in tst_QComboBox::currentIndex.
Fixes: QTBUG-108614
Pick-to: 6.5 6.2
Change-Id: Ib6dfa887d9247f2c47df065039d69ba57c32fa24
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Change the signature of stateChanged(int) to emit Qt::CheckState
instead. This was forgotten during Qt6 porting so we have to wait for
Qt7.
Task-number: QTBUG-104688
Change-Id: Ica2504e5b9ae68612de81524faed0f31c9b10402
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QColorDialog supports entering hex rgb values only with a leading #.
That makes copy/paste impossible whenever the copy source has plain
hex, without the leading #.
This patch automatically adds a leading # character, when missing.
As a drive-by, QObject::connect statements are altered to PTMF syntax,
amending 9eb1b9e86ce3d1004e39e8ab7c7ecb6796d6df1a.
The patch also adds an autotest for the new functionality.
Fixes: QTBUG-111742
Pick-to: 6.5
Change-Id: I4ced29dc8b543457f411a3fa0ac756b550cdb09f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Previously the widget stayed black and we printed
"QBackingStoreDefaultCompositor: the QRhi has changed unexpectedly,
this should not happen".
To make it work the compositor is recreated in addition to the rhi
and the widgets are informed with the internal events.
Change-Id: I982d08bd3530478fe0f827080154c008a92a812e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Signals of the vertical scroll bar were blocked when scrolling with
pageUp/pageDown keys or clicking on the scroll range outside the
scroll bar. This has lead to inconsistent signal emissions:
The vertical scroll bar's valueChanged signal was emitted only on
single steps and when the scroll bar was moved with the mouse.
When it was moved in page steps by clicking on the scroll range or
pressing pageUp/pageDown, it was not emitted.
This patch removes the signal blocker for page step movements, which
was added in 94fd108ea4 to replace
explicit calls to blockSignals(), which were added in
c14d442b08ac81327b173b0a220c7b1840667899.
The patch also adds test function to tst_QPlainTextEdit to check if
the valueChanged signal is emitted correctly.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-8682
Fixes: QTBUG-25365
Change-Id: I4385a5387c91497f623978e35bbbe3e06f473afe
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The signal has been emitted also, when the slider position has changed
without a value change (e.g. on QWidget::show() or on resizing).
This patch stops emitting the signal without a value change.
It adds a verification to tst_QAbstractSlider::setValue(), that
valueChanged is not emitted on a no-op value change.
As a drive-by, the patch removes an unnecessary assignment and
changes signal spy constructions to PTMF syntax.
Pick-to: 6.5 6.4 6.2
Task-number: QTBUG-25365
Change-Id: I9932e45d4e680aa53422ca75aa42a16306213a38
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QCompleter::setPopup() sets window flags, focus policy, parent, focus
proxy, item delate and installs an event filter, before the popup
argument is assigned to d->popup.
In the QCompleter::eventFilter override, QObject::eventFilter is called
(under more) if d->popup is nullptr.
If a custom class is inherited from QCompleter and it overrides
QObject::eventFilter(), this causes an infinite loop.
This patch re-factors the method.
- early return is added if the new popup != d->popup
- remembering the existing widget's focus policy is constified and
moved ahead of the delete secion.
- assignment of d->popup to popup argument is moved after the delete
section.
- after assignment, the argument variable is no longer used.
The refactoring eliminates two issues:
- potential risk of double-installing event filter due to missing
early return.
- inifite loop if inherited class installs another event filter.
The patch adds a test function to tst_QCompleter, which implements an
inherited class, installs an event filter on a popup and checks if a
ChildAdded event hass been recorded.
Fixes: QTBUG-111869
Pick-to: 6.5 6.2
Change-Id: I3f7a2434a11476077a5260e7686a912da9f6c60d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All the other overloads are implemented using the new one.
Windows change relies on the pre-check in the code review making sure it
compiles.
[ChangeLog][QtCore][QThread] Added sleep(std::chrono::nanoseconds)
overload.
Task-number: QTBUG-110059
Change-Id: I9a4f4bf09041788ec9275093b6b8d0386521e286
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix coding style, replace QVERIFY(a == b) with QCOMPARE, use nullptr,
use a lambda for a local slot, and wait for the test widget to go away
so that it doesn't break following tests.
Change-Id: I1a4f790084b92301444a96a1449c84bf3317b88a
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
If a composite widget is put behind one of it's contained children via
QWidget::setTabOrder, then our logic might replace the composite widget
with the contained child. In that case, we'd end up with a broken tab
chain, possibly resulting in incomplete clean-ups and triggering asserts
when shutting down the UI.
Handle this by stopping the last-child searching logic at the respective
other widget, and by not allowing both widgets to be the same.
Augment test case, and apply some minor refactoring to the code.
Pick-to: 6.5 6.2
Change-Id: I7d97dfa85315b6c01daa283253025d94a1727048
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The choice of whether to show a message again is per message,
so when showing a new message we need to reset the check box
back to its default checked state, otherwise the user might
mistakenly dismiss more than the indented message.
[ChangeLog][Widgets] QErrorMessage will now reset the check
box for showing a message again for each new message shown,
as each individual message has its own suppression state.
Pick-to: 6.5 6.5.0
Change-Id: I86d4bb5eabdb5b7a478c03516108a5edf87fcbe3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A click on the selected item should deselect all other items before
editing starts.
Remove the part of the test case that assumes that we can have multiple
items selected in ExtendedSelection mode, and click on an item to start
editing while maintaining selection. That can never happen.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111131
Change-Id: I0312eed4614502cfb77eca26d3f7615427493d7d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Amends 0242be9060, and removes unwanted
side effect of having a modified style behavior for later functions.
Pick-to: 6.5 6.4 6.2
Change-Id: If3dff0d7ab9e6c6c10e7a92d0a3eaff98fa1457f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
<bit> exists in C++20 and is properly both constexpr and optimized. But
in C++17 mode, we don't have constexpr bitops and instead elect to have
performance at runtime instead. But somewhere along the line, either
when they were added, when C++20 <bit> support was, or in any of the
bugfixes for other compilers, the nesting of #ifdef got messed up and we
declared that we had constexpr builtins for MSVC in C++17 too.
The macro QT_HAS_CONSTEXPR_BUILTINS isn't supposed to be used by anyone
else... but we ended up not being able to use it ourselves either. So
I'm renaming it to a more precise label.
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd1741b9b4060c9753
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise, double-click recognition will fail.
Use QEvent::clone when possible, or set the timestamp explicitly when
not.
As a drive-by, remove some long-dead code in affected code lines.
Fixes: QTBUG-102010
Pick-to: 6.5 6.4 6.2
Change-Id: I882bf6e8090bf6f182b7a0a3c62aa3a4c8db2e14
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
As of macOS 10.14 the keyboard assistant background is shipped as part
of the compiled asset catalog of the app, so looking it up via a URL
will fail.
Instead we look it up via NSBundle's dedicated image lookup function,
which handles both cases.
The logic has also been moved to qwizard.cpp, since the additional
plumbing via QPlatformNativeInterface was unnecessary.
The keyboard assistant itself no longer shows the background image
as of macOS 12, so we might consider doing the same, but the design
of the assistant has also changed significantly, so as long as our
QWizard layout looks like the old keyboard assistant we keep the
background as well.
Pick-to: 6.5 6.2
Change-Id: I7d42dd79b285f3518837458864bca6bc353b3b6d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Amends 17c1ebf8bf, after which dragEnabled
item views toggled selection on click rather than on press. If the edit
trigger included SelectedClicked at the same time, then Ctrl-Clicking a
selected item would start editing the item, instead of toggling
selection.
Fix this by ignoring clicks with modifier when evaluating whether
editing should start.
Extend the mouseSelection test case by including a column for the
editTrigger, and cover the respective combinations.
Fixes: QTBUG-111131
Pick-to: 6.5 6.4 6.2
Change-Id: I9605f9b3d5a49e292551a34c3c4c7a5f9ecb2a89
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
`QStatusBar::removeWidget` was hiding the wrong widget (the next one),
since the `removeAt` call changed the item that the `item` variable
is referencing.
This fixes a regression in Qt 6.3.0 (7166a82844).
Pick-to: 6.5 6.4
Change-Id: I9977b47e6208f8d451ff1037bcb9f4e8414cb431
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
A recent update moved handleScreenChange out of being a private slot.
Porting to the new syntax fixes the warning and moves to a compile-time
check.
Pick-to: 6.5
Change-Id: Ibd85c6caf7dca051d669250a94a82fbddbd3435d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a slot connected to a QMenu-action destroys the QMenu, then
we must not touch data members in subsequent code, and instead return
immediately.
We cannot use QBoolBlocker here, as that would reset the data
member of QMenuPrivate even when trying to return early.
Fixes: QTBUG-106718
Pick-to: 6.5 6.4 6.2
Change-Id: I6b5ea471b1bf1f9864e1384382100f8f6c01346f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
dfb4697e4a made a change to selection
behavior that resulted in a regression where clicking on an item view
but not on an item would cause the current item to get unselected.
Changes the behavior to not update in this case.
Added a new test that specifially checks for this scenario and ensures
that the current item is still selected, even after the user clicks on
empty area.
Fixes: QTBUG-105870
Pick-to: 6.2 6.4 6.5
Change-Id: I191c3878819b99897083039fba0ab43908da5429
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Failing test functions fastMove, moveAccross, moveInOutOverlapped seem
to be stable in the meanwhile. This patch removes the blacklisting.
Task-number: QTBUG-109036
Pick-to: 6.5
Change-Id: I9a2b015572e4d8a4eac196d3985c052030fd84e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test function used only the left button to test mouse event
propagation.
This patch adds the right and middle buttons to the test data.
Task-number: QTBUG-110055
Pick-to: 6.5 6.4
Change-Id: I02683168216843919e889987a8b0e8a0f1592d3a
Reviewed-by: Doris Verria <doris.verria@qt.io>
QWidgetTextControlPrivate::mouseReleaseEvent() has early returns
implemented, e.g. when link has been right clicked or no selection
anchor has been found. These early returns, however, still consume
the event.
This leads to events getting lost instead of getting propagated:
As an example, a QLabel with rich text uses QWidgetTextControl. While
it propagates mouse press events back to its parent, mouse release
events get lost. A QLabel with plain text propagates both events
back correctly.
This patch adds QEvent::ignore() to the early return.
Since no test class exists for QWidgetTextControl, it adds a test in
tst_QLabel.
Fixes: QTBUG-110055
Pick-to: 6.5 6.4
Change-Id: I950f8c3f135793b01c59832835bb429db2282169
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When rows are hidden (implicitly or explicitly), then their layout data
does not get fully updated. If rows get hidden after the layout data has
been calculated once, then we must make sure that their indices are
reset. Otherwise we might access array indices that are out of bounds
when the layout data structure gets resized to fit only visible rows.
For good measure, skip entirely over hidden rows when accessing the
layout data when arranging the widget.
Fixes: QTBUG-109237
Pick-to: 6.5 6.4
Change-Id: I4d6943b6a110edb61f60ce78d31f0fc64b5cc03d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QDateTimeEdit has such reset functions for the minimum/maximum
range properties, this makes QCalendarWidget consistent with the
simpler editors.
Fixes: QTBUG-62448
Change-Id: Iabb89f599e4996f00488a885a5b8a009471838b3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This reverts commit 4096667d66.
Reason for revert: <Screen shot workaround is flaky.>
Change-Id: I6e01cc584c094d0d0b8c1544b9daf72d648dd002
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
