QTableWidgetItem uses additional enum flag ItemIsHeaderItem which has
the same numerical value as ItemFlag ItemNeverHasChildren.
This causes conflict since the user can set the latter flag using
the setFlags, while the ItemIsHeaderItem is only used internally
to mark header items.
Remove the additional flag and use boolean instead to fix the conflict.
Pick-to: 6.2 6.5 6.5.1
Fixes: QTBUG-113209
Change-Id: Icff549c7e452d9f84575a524361719204817274e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QListView generates a move, when an item is dropped directly behind
itself. This causes unexpected behavior, e.g. item widgets getting
discarded.
This patch prevents a move from being generated in that case.
It adds an autotest to tst_QWidget, to verify item widgets and item
data do not get discarded in case of a no-op drag&drop.
Fixes: QTBUG-100128
Pick-to: 6.5 6.2
Change-Id: I02a755320a7b71dad218293c9c94c88da6507423
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
A click on the selected item should deselect all other items before
editing starts.
Remove the part of the test case that assumes that we can have multiple
items selected in ExtendedSelection mode, and click on an item to start
editing while maintaining selection. That can never happen.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111131
Change-Id: I0312eed4614502cfb77eca26d3f7615427493d7d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Amends 0242be9060, and removes unwanted
side effect of having a modified style behavior for later functions.
Pick-to: 6.5 6.4 6.2
Change-Id: If3dff0d7ab9e6c6c10e7a92d0a3eaff98fa1457f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Amends 17c1ebf8bf, after which dragEnabled
item views toggled selection on click rather than on press. If the edit
trigger included SelectedClicked at the same time, then Ctrl-Clicking a
selected item would start editing the item, instead of toggling
selection.
Fix this by ignoring clicks with modifier when evaluating whether
editing should start.
Extend the mouseSelection test case by including a column for the
editTrigger, and cover the respective combinations.
Fixes: QTBUG-111131
Pick-to: 6.5 6.4 6.2
Change-Id: I9605f9b3d5a49e292551a34c3c4c7a5f9ecb2a89
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
dfb4697e4a made a change to selection
behavior that resulted in a regression where clicking on an item view
but not on an item would cause the current item to get unselected.
Changes the behavior to not update in this case.
Added a new test that specifially checks for this scenario and ensures
that the current item is still selected, even after the user clicks on
empty area.
Fixes: QTBUG-105870
Pick-to: 6.2 6.4 6.5
Change-Id: I191c3878819b99897083039fba0ab43908da5429
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If an item in a list view has a null icon, then the decorationSize gets
calculated as -1, -1. The style would then try to wrap the text to a
lineWidth of -1, ending up in an infinite loop in viewItemTextLayout.
To prevent that, don't set the HasDecoration flag of the style option
when the icon is null, and don't fall back ot the decorationSize unless
the flag is set.
Add a test for this particular item configuration. This also fixes the
widget baseline test with styles that don't provide all standard icons.
Pick-to: 6.5
Change-Id: I691db6abede9a9b2ad300f3ee7fbfdae5fb6097f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Silence warnings such as:
variable 'sum_lookup_visual' set but not used [-Wunused-but-set-variable]
Change-Id: If38515d9753cf7b79a250985890a139e96e92329
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process actually handle all time-spec cases in various places
that only handled UTC or LocalTime, or at least note that they don't
where that's not practical. Also tidy up header ordering and ensure
QDateTime's header is included wherever it's used, while adding the
include for QTimeZone where needed.
Task-number: QTBUG-108199
Change-Id: Ic1a5cdf0aaf737bf1396aa8ac58ce2004cef7e19
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The function is used the internal window activation machinery and
should not be called by user code.
Many tests still use this function, and should be ported over to
QWidget::activateWindow(). For now they are using the private
helper in QApplicationPrivate, so that we can progress with the
public API deprecation.
Change-Id: I29f1575acf9efdcbae4c005ee9b2eb1bb0c8e5b5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
An item delegate might override destroyEditor to merely reparent the
existing editor out of the item view for later reuse, rather than
actually destroying the editor.
As of d0dffdfc01, the code calling
closeEditor() - which calls destroyEditor - might explicitly set focus
back to the item view parent of the editor. This needs to handle that
the parent of the editor might no longer be valid after the closeEditor
call returns, and rather store the old parent widget explicitly.
Add a test case that segfaults with nullptr access without the fix.
Fixes: QTBUG-105231
Pick-to: 6.4 6.3 6.2
Change-Id: I04a355673823c4941865f7a575864e991ceeb5f0
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Couldn't reproduce flakiness on OpenSUSE KDE/X11 and can't see any
history of flakiness in the last 3 months in our testresults database.
Task-number: QTBUG-62967
Task-number: QTBUG-63262
Change-Id: Id50291798eda922283e04b45205ae9105e9fdab2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This fixes the flakiness seen in OpenSUSE KDE/X11 desktop.
Fixes: QTBUG-70590
Task-number: QTBUG-105177
Change-Id: I7c2431e58b2a60ea04e26d4e70c0f2867d544ff2
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
When item.height > viewport.height, the next item is not found
correctly, resulting in an infinite loop.
In this case, move directly to the next item.
Pick-to: 6.4 6.3 6.2
Change-Id: I67a40a079ca9dd9189bf84ae550758c685b83d75
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Invalid inserts of items are tested. However, on an invalid insert
of QTreeWidgetItem into QTreeWidget, the QTreeWidget does not take
ownership of the to-be-inserted items. These items were leaked in
the past.
This patch introduces a scope-guard, so the items are not leaked.
Change-Id: Ib53ac02605c3a3c0bd1ae69bbd0876f860d08093
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Several classes in QWidget use QDataStream internally in order
to save and restore state. These QDataStream usages were not
versioned, meaning that if Qt changes the serialization for some
datatype, then the data saved between different Qt versions becomes
incompatible. Note that the save/restore API in question just produce
opaque blobs as QByteArrays -- the user has no control over the
QDataStream objects and thus versions.
Fix by version the usages.
In QHeaderView this has caused a regression because QBitArray *did*
change version between Qt 5 and 6. In general, using QDataStream without
explicit versioning is a mistake, so deploy the same fix elsewhere as
well.
Fixes: QTBUG-99487
Pick-to: 5.15 6.2 6.3
Change-Id: I82bb5c266f4e5dedc0887cbef855dccab1015e29
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: <doctor.whom@gmail.com>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Remove a processEvents() call followed by a QCOMPARE and turn it
into a QTRY_COMPARE. Otherwise it seems to be randomly failing on Ubuntu
22.04.
Change-Id: I3c1b9d55c857c79ffd36aeb98971db60267adace
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After cbf1b4bc60bca3994b8f8685ee922e53a6b4eed2 the selected item got
deselected on Ctrl+Press, which made Ctrl+dragging a selected item
impossible.
Only deselect on Ctrl+Release. Add scenario to existing test case,
and update the documentation to clarify the properties involved, and
to point out that the event parameter might be nullptr.
Fixes: QTBUG-101647
Pick-to: 6.3 6.2
Change-Id: I749b1cb1a0a311f5c1d4c333984716f05f2c90b5
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Enderlein <volker.enderlein@ifm-chemnitz.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test task191545_dragSelectRows relied on the fact
that the view is not scrolling. But on a small screen,
it scrolls automatically.
Fixes: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: I691361c965ab03d8a012f2b83715c7c96d990ec5
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QHeaderView creates persistent indexes in
_q_sectionsAboutToBeChanged(), called by the slot connected to
rowsAboutToBeMoved/columnsAboutToBeMoved.
In the case of rows, QAbstractItemModel emits the signal *before*
preparing to update persistent indexes in itemsAboutToBeMoved(),
so it can see the ones newly created by QHeaderView, all is well.
In the case of columns, the emit was done *after* calling
itemsAboutToBeMoved(), so the additional persistent indexes created by
QHeaderView were ignored, and in endMoveRows() we could end up with:
ASSERT failure in QPersistentModelIndex::~QPersistentModelIndex: "persistent model indexes corrupted"
This bug has been there since the very beginning of beginMoveColumns(),
but was undetected because moving columns in a model is pretty rare
(in my case there's a QTransposeProxyModel that turns columns into
rows in the underlying model, and a proxy that handles dropMimeData...)
Pick-to: 6.3 6.2 5.15
Change-Id: I74bad137594019a04c2a19c2abb351ff3065c25a
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
There was a test for Qt4 compatibility in tst_qheaderview.
We don't run it since Qt 6.
This patch removes the unused code.
Change-Id: I751829ac5a142e79379e81e9e739107544cf7406
Reviewed-by: Arnaud Bienner <arnaud.bienner@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The view.resize() command has no effect if the requested
size is smaller than the screen. So the view has space for
the whole model. It then won't scroll, so scrolling cannot
be tested.
This patch enlarges the model so that scrolling is always
necessary and thus possible.
Task-number: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: Ibff512158d9c16be120a69c7328b6d0ae2c3b551
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Scroll tests relied on having a small window. On Android, the
window can not be smaller than the screen.
This patch changes the tests so that the windows have large
enough content so scrolling can happen.
Fixes: QTBUG-87408
Pick-to: 6.2 6.3
Change-Id: I26a444518fd934527089297c594673937f0ecf88
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qabstractitemview requires a movable cursor.
This patch skips the test if there is no movable cursor.
Pick-to: 6.2 6.3
Fixes: QTBUG-87400
Change-Id: I4e917b2ad062ce068f23603410aa9209edb9828d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
As with QHoverEvent, it's better to require globalPos rather than
"initialized to QCursor::pos(), which may not be appropriate" as the
docs have pointed out for many years now. This removes the remaining
calls to QCursor::pos() in event constructors.
Task-number: QTBUG-52430
Task-number: QTBUG-69433
Task-number: QTBUG-100324
Change-Id: I076dae56f37abaad7085cc95dddee453a80a45f3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QSinglePointEvent ctor assumes that the given globalPos is correct,
so it was wrong that the QHoverEvent ctor passed along a local position
as global. It's better to require globalPos as an argument; and in fact
it seems that everywhere we construct a QHoverEvent, global position is
available, or possible to get by transformation (which is better than
resorting to QCursor::pos()).
Also, don't convert to QPoint: pointer events have qreal resolution and
there's no reason to truncate them.
Fixes: QTBUG-100324
Change-Id: I919455da36265988d3d149eb97563c9ed0d2c660
Pick-to: 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We need to check whether the horizontal header's selection includes the
index for the row at the top, rather than for row 0, as the index we
check is based on the scrolled position of the header, so would never be
included in the top row when the view is scrolled. This is correctly
done in selectRow already.
Add a test case that simulates selection of rows and columns by clicking
on the header.
Fixes: QTBUG-98444
Pick-to: 6.2
Change-Id: I2fa1b32bf75dc96225b40145b713bf7e2ffc29dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Amends 17c1ebf8bf, which introduced logic
that recognizes double clicks to avoid duplicate clicked() emits. If a
slot connected to doubleClicked opens a dialog, then the release-event
will not be seen by the item view, leaving the flag incorrectly set and
preventing the next clicked signal.
Fixes: QTBUG-97853
Pick-to: 6.2 5.15
Change-Id: Iced83e8c66a763672f522265435dc52a745227e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Some item views, such as QListView in icon mode, implement a selection
rectangle with which the user can "lasso" items. So far, dragging that
rectangle did not trigger auto scroll, so unless an item near the edge
was selected, the user had to stop the lassoing and scroll manually to
reach more items.
Since QAbtractItemView implements auto scrolling for drag'n'drop, we can
use that mechanism also when the selection rectangle is dragged. This
requires some modifications:
We need to make sure that scrolling the view during a drag-selection
generates mouse move events so that the selection is extended and the
rectangle is updated in subclasses.
And we need to stop using QCursor::pos to get the position of the mouse
pointer, as this makes the auto-scrolling untestable. Instead, record
the mouse position last seen during a mouseMove or dragMoveEvent in
content-coordinates (identical to pressedPosition).
As a drive-by, fix some coding-style issues in nearby code.
Done-with: Zhang Hao <zhanghao@uniontech.com>
Fixes: QTBUG-96124
Change-Id: I426f786e5842ae9f9fb04e9d34dc6d3379a6207f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- when there is no intersection between the current selection and the
spans collection, get ranges for all cells, just as if no span exists
- when there is an intersection between the current selection and the
spans collection, get separate ranges for each cell (as before)
This fixes the regular case of selecting multiple non-spanned cells
after some cells are merged (get a single range for all cells instead of
separate range for each cell). However, when selecting together a group
of spanned and non-spanned cells, you still get a separate range for
each cell. But this is normal behavior in similar applications; for
example in LibreOffice, you cannot select and merge spanned and
non-spanned cells: an error dialog tells you that it's not allowed.
Done-with: Christos Kokkinidis
Pick-to: 6.2
Fixes: QTBUG-255
Change-Id: Ic38f9a064a1f499825e7f750668013fc2dc564ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add operators as hidden friends, add test case to make sure that
basic value-type operations are possible with this type.
Task-number: QTBUG-255
Change-Id: I7fbf453aa16084c0b2a0079487cacb4e092ff664
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Item views can open an editor widget on the first key press, and need to
take special care not to break input methods. The initial key press
starts compositing by the system input method, which is then interrupted
by the focus transfer to the editor.
To solve this problem, the widget needs to keep focus while the initial
composition is ongoing, and only transfer focus to the editor once the
composition is either accepted or cancelled by the user. Add a state flag
that is set during this initial preedit phase.
During this initial composition, the item view will receive all input
method events, and needs to forward these to the open, but not yet focused
editor for the user to get the correct visual feedback during the preedit
phase. The item view also needs to report to input method queries on
behalf of the editor to make sure that the IM UI is correctly positioned
without covering the user input.
Implement a test that simulates the sequences through synthesized
QInputMethodEvents; we can't simulate the entire system input stack.
Fixes: QTBUG-54848
Change-Id: Ief3fe349f9d7542949032905c7f9ca2beb197611
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
After the last row is moved, 0 will be returned when obtaining
row and column data. At this time, QListView::doitemslayout will
not call d->doitemslayout, so the QBspTree data structure will
not be cleaned up, leaving a stale tree structure behind. This
will trigger an assert during paintEvent handling if QListView is
set to IconMode
In QListView::ListMode the test for a valid model index doesn't
use an assert.
Call QListViewPrivate::clear explicitly if the column count is 0
so that the QBspTree and other data structures are cleared.
Add a test case that simulates this scenario by implementing a
model that returns a 0 column count for an index after the model
structure was changed through a move of rows.
Done-with: Volker Hilsheimer
Fixes: QTBUG-95463
Pick-to: 5.15 6.1 6.2
Change-Id: I36419be5459b8ced930c619f538482ea1db4ad03
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unlike an acceptable effect in QTableView + QTreeView
setAdjustPolicy(QAbstractScrollArea::AdjustToContents)
unfortunately didn't work for QListViews (and QListWidget).
This patch corrects QListViews AdjustToContents
behavior.
[ChangeLog][QtWidgets][QListView] A more correct implementation
of QListView::viewportSizeHint has been made. That
implies that setting the sizeAdjustPolicy to AdjustToContent
on QListView and QListWidget will now cause the view to
size after the contents and avoid scrollbars.
Pick-to: 6.2
Task-number: QTBUG-58749
Change-Id: I1675115f2348e2fcf0b2c39b451ef337e10eb872
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
For SingleSelection, removing the selected item will select the nearest
item and, if autoScroll is enabled, ensures that the newly selected
item is visible in the viewport. This may result in scrolling.
For Multi- or ExtendedSelection, this should not happen, as having no
selection is perfectly fine in those modes.
However, QListView still tried to scroll to the current item in response
to the currentIndexChanged signal. Since the currentIndex is at this
point already hidden, the rectangle for it became invalid, and the
attempt to scroll resulted in a one-pixel up-movement of the viewport
(since the invalid rectangle has width == height == -1).
Fix this by not scrolling if the rect for the index is invalid. Note that
the index is still valid at this point, so we can't shortcut the call
stack earlier. Add test that exercises the different combinations of
ViewMode and SelectionMode, and demonstrates the one-pixel
movement without the fix.
Fixes: QTBUG-94788
Pick-to: 6.2 6.1 5.15
Change-Id: I1f36973eadb46e8c9b8b8068bc76ee09e9f490dd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
