We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing over and over since it was removed from the
blacklist. Obviously it is not stable.
This is a partial revert of commit
b10ee45546.
Task-number: QTBUG-71773
Change-Id: Ie2588538ee704652c2f09ce6ad947da3011e7dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test needs to also unregister its timers when it fails. Therefore,
wrap the registering and unregistering in an RAII class.
Task-number: QTBUG-71773
Change-Id: I6ef44e580880deecb32763b5b0cd71e1c26929be
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows and WinRT only have on event dispatcher class so that failing
test cases in one test will most likely also happen in the other.
Change-Id: Ib047c6870e6e02f3cf8deaaa6e438ed0ac7e2d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We document being able to parse more than 8-bit per color, but were
ignoring everything after the first 8 bits.
Change-Id: Ic85ab04b0836e6979a623e294eebd5084c1a9478
Fixes: QTBUG-71373
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QTBUG_7714_fullUpdateDiscardingOpacityUpdate2() would fail when
it moved to another screen if there is one to the left.
Change-Id: I3f8edc04c31dffc5a3bd005d9e5170dd68151df7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
When calling setDocument (directly or through the constructor) a delayed
rehighlight is initiated. Previously, if any text was changed before
this rehighlight could run it would cancel the rehighlight, even if the
changed text only caused a new block of text to be highlighted.
Fixes: QTBUG-71307
Change-Id: Ib09b664d90906f5b4427105f0e45469806f3a779
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The unit tests weren't running into this problem because the every
setDevice() was preceded by the object being initialized with the exact
same data, so there was never a previous error state. I've only changed
a couple of tests, left the other setDevice() unchanged so we test both
behaviors.
Fixes: QTBUG-71426
Change-Id: I1bd327aeaf73421a8ec5fffd1561a590e3933376
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By accident, when we erroneously tried testing TlsV1_3 on macOS with
SecureTransport (which does not support TLS 1.3) we hit this quite
subtle problem: it can happen that a server-side socket is never
created but a client (after TCP connection was established) fails
in TLS initialization and ... stops the loop preventing
SslServer::incomingConnection() from creating its socket. Then we
dereference nullptr.
Task-number: QTBUG-71638
Change-Id: I8dc5a4c53022a25aafe2c80a6931087517a48441
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Remove the conditional inclusion of DTLS versions, they made difficult
and unnecessary ugly adding new protocols (something like TlsV1_2OrLater + 4).
2. OpenSSL 1.1.1 first introduced TLS 1.3 support. OpenSSL 1.1 back-end is
compatible with OpenSSL 1.1.1, but would fail to extract/report protocol
versions and set versions like 'TLS 1.3 only' or 'TLS 1.3 or better' on a
new context. Given 1.1.1 is deployed/adapted fast by different distros,
and 5.12 is LTS, we fix this issue by introducing QSsl::Tls1_3 and
QSsl::Tls1_3OrLater.
SecureTransport, WinRT and OpenSSL below 1.1.1 will report an error in case
the application requests this protocol (SecureTransport in future will
probably enable TLS 1.3).
Saying all that, TLS 1.3 support is experimental in QSslSocket.
Done-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Done-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change-Id: I4a97cc789b62763763cf41c44157ef0a9fd6cbec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The tests would rely on the window manager giving it focus a bit too much.
Change-Id: I1b28def2c95a4f0a9665a7cf6e0c14db03df98d5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This only updates data on languages already present in 5.12; once it
has merged up to dev, the scripts need to be run again to pick up a
few more languages and possibly add any more new languages present in
v34. Change some tests to match changes in en_AU's abbreviated day
and month names.
[ChangeLog][ThirdParty][CLDR] Update locale data to CLDR v34.
Task-number: QTBUG-71144
Change-Id: I68402b5e7e9d3dba669b8ba31b9a8abd86675c6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QSqlQuery::bindBool() did not check if the bool is correctly bound
as part of the WHERE statement. Add a new test to query for the bool
column and check if there is exactly one row returned.
Fixes: QTBUG-38891
Change-Id: I0bd1ceb1b30e50f67f44f5b06d68683195b78b29
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When QMimeProvider parses the shared mime database xml files,
it will read the <comment> element for mime comment and treat the
`xml:lang` attribute as locale language string. When no `xml:lang`
attr is provided, QMimeProvider will read the value and treat it as
a en_US locale string as the default key.
When we call QMimeType::comment(), it will try to get the locale
comment string with the default language (QLocale().name()), once
it can't find a matched result, it should return the default key
(which QMimeProvider set it as en_US locale before) as fallback.
Task-number: QTBUG-71314
Change-Id: I444f8159d6f19dfef6338cd79312f608d8f13394
Reviewed-by: David Faure <david.faure@kdab.com>
Follow the pattern of char and float, and treat shorts as a more generic
type in QVariant::canConvert()
Task-number: QTBUG-60914
Change-Id: Ib1cc7941ee47cb0fc0098f22f98a03cd6f6b63fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Spaceship operator was disabled for QCborValue, but not the test.
Change-Id: Icb91da689f62ef6de9f4fa926346505c5e50e9eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since Qt 5.10, qTo/FromBig/LittleEndian<float/double> stopped working.
It may be confusing, but big endian floats do exist, so not to break old
code, we should support them.
Change-Id: I21cdbc7f48ec030ce3d82f1cd1aad212f0fe5dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
on macOS, the test seems to be stable nowadays.
Task-number: QTBUG-39986
Change-Id: I18430c3feb27a5bee5474e1eb95f7d89b25f00a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Calling rowCount inside another auto test function yields unexpected
results, if rowCount fails. Without a check for QTest::currentTestFailed
the failure will not stop the calling function and other functions like
rowsInserted and rowsRemoved might happily continue even though their
requirements are not met. That caused a crash on winrt under certain
circumstances.
In addition to that TRY_WAIT now does not only wait for the given
amount of time, but also gives feedback about its result. Before
this change TRY_WAIT was basically useless, as it gave no indication
about its success/failure.
Fixes: QTBUG-71121
Change-Id: Ibd3f233a0b913db799814be97c4274d510643c74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The state was forgotten from the translation layer, this is important for tree views.
Fixes: QTBUG-71223
Change-Id: Ief4004fe455889f9d5a7eb018bf34d37c36a6bd9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before commit 4d15f393a7 update requests
were handled by a timer on QWindow. Therefore they survived the closing
and re-opening of platform windows. Now, as the timer was moved to
QPlatformWindow, it gets reset when you close the QWindow, and any
pending update requests are lost. However, we do set the
updateRequestPending variable on QWindow when requesting an update.
Therefore, we can also restore the update timer on the platform window
when creating it.
Change-Id: I23b00f24a46706beac7d1455edd8a5623db46b22
Fixes: QTBUG-70957
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wrong option was used to set zlib compression level for png
setCompression with negative value uses default compression
setCompression with value between 0-100 converts to zlib compression level 0-9
setCompression with positive value overrides Quality option
Change-Id: Ic4b048a1e30d6940019c2a00a6c24d0c11e3f821
Reviewed-by: Alexandra Cherdantseva <neluhus.vagus@gmail.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When there were additional spaces between the function definition and
the first parameter, the parser failed to parse it when it contained
another function (e.g. 'qlineargradient(... rgb() ...)').
The reason for this was that ::until() needs the function at index-1 so
it can correctly count the opening parenthesis.
Fixes: QTBUG-61795
Change-Id: I992f556e7f8cd45550f83bc90aa8de2b4e905574
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
