we just generated them, and they really don't need QT_{BEGIN,END}_*.
Change-Id: Ib7b2454ae80762e644d9667106960cc7632f90fc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is cleaner than having it parse qmake project files.
the only remaining built-in version extraction is the fallback to
qglobal.h needed for bootstrapping.
as a "side effect", this fixes the build of modules with mismatched
versions centralized in .qmake.conf, as this was simply not handled so
far.
the -mkspecsdir syncqt option goes away, as there is no use case for it
any more.
Task-number: QTBUG-29838
Change-Id: I6912a38f0e93a26bc267a9e3d738506fd3ad431b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is because on some systems, /usr/bin/perl is too old to
run syncqt. MSYS is one such system.
Change-Id: I3e1aa2db557cc3919618350775e7218ae05aa93f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Addon modules may not be in the standard Qt namespace and therefore do
not use the QT_{BEGIN,END}_NAMESPACE macros. Instead module specific
QT_{BEGIN,END}_NAMESPACE_FOO macros are used. Extend the syncqt test
to allow for this and ensure that the QT_END_NAMESPACE suffix matches
the QT_BEGIN_NAMESPACE suffix.
Change-Id: I33110c01118b0fb4376307db7447f747fc38bb29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it would have taken only the last line, which is clearly wrong. as
nobody noticed this, the handling is clearly not needed.
Change-Id: I6f4f45ce8c90cb9b0ef60abbaa5ed49b54d8b47d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The QT_{BEGIN,END}_HEADER macros have never worked and
might be potentially removed.
Also removing the list of blacklisted files from sync.profile
Change-Id: I601969cf8eddf3908c3ad46f63af9434670d4046
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
the source paths need to be made relative to the main source dir
Change-Id: I98d74eca7e54d1179ab602bb87b96b66f3193ce4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
all modules have been migrated to auto-generation
Change-Id: Ie7b3ebfd735a22f8e0b0339909b6385508d7a6b3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Do not print warnings when stop-processing pragma was encountered.
Change-Id: I0dd3b317b3a685afe613527988eb137325037e16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
the bootstrap does not need CamelCase includes, deprecated headers and
whatnot, so just don't do it. the full thing will be run on qtbase by
qmake.
Change-Id: Idffdd4750a73574c8c32ee75d00080abfe37e03c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
I've introduced a variable $post_kw (post-class-keywords) that
contains the patterns which are expected after a class name.
This variable is used both for a negative look-ahead assertion
in the class-name capture (so the regex doesn't parse the
keywords as the class-name), as well as to carry the parser
over the keywords into the subclass clauses.
Change-Id: Ia534ca01a511e1c773d007f1b0b4f448e8d009d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This removes the bogus warnings when running
syncqt from configure about snippets in the doc/
folders.
Change-Id: I8e3d258238c1cd1e763ce63b895d58b68bbc06f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
sort backwards by ascii, so that the lowercase headers come first -
otherwise the camelcase headers would survive the first round, as they
include the lowercase forwarding headers which were not deleted yet.
Change-Id: Iece2788206d31a11428f38da8d8f9f4d0b6dc992
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
... instead of having a forward from the include dir to the (shadowed)
source dir of the module.
Change-Id: I967227950e8aeb1b9f62befbf9fff3746a0486b6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that all modules have migrated, this dead code can be removed.
Change-Id: I5e9c7dd3fb271346d1b5f0e2930874da3e4d2d57
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
As discussed on mailing list and QtCS 2012.
Any file starting with qwindowsystem is now marked as
QPA API.
This change drops _qpa from the filenames and adds gui-private
where required for the code to compile. This change is backward
compatible otherwise and compat headers are created for
the old inclusion headers.
Change-Id: I72ea0f394dee74f46e614fcf11ab5500ac9fef2a
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
that way qmake is made aware of the forwarding pris which are generated
for this module even when a top-level .qmake.cache prevents the module's
root from being found automatically.
the path is also added to the cache, so that subsequent partial
qmake-ing of the tree will still find the module.
this also makes the -cache-module-fwd parameter of syncqt useless, so
remove it.
Change-Id: I2afbc52a465c0b3260e9bcaf032c43a82ae8061f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this has the advantage that the %mastercontent assignments in sync.profile
are not necessary any more. as it happens, most modules got them wrong
anyway.
Change-Id: Ibdf689be408f18e1d90c44ef4ecacd7c24b1f1c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of writing the same file twice, just forward to the compat
header, like it is done for every other header.
Change-Id: I8c908f80149aff4720cca6d51ab5b550c31f78b1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's module-specific.
on the way, fix it to actually support multiple files.
Change-Id: I796b0e98e38a54754022e0e2fa48cecb54d06ff4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake-generated version headers don't exist yet at the time syncqt runs,
so the forwarding headers would be deleted - just to be re-created a
moment later, thus changing the timestamp for no good reason.
Change-Id: I1b4c2f05f57c2315adf4b8dd726ea413ede1be5b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the forwarding pri is loaded even if it was still created by syncqt, so a
top-level qmake -r will still catch it even in the future.
Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.
Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
now the phonon paths are actually normalized.
just relying on File::Spec for the path relativization, so the code is
much shorter.
Change-Id: I69d6bac73e366ed0f754e1282a375871ce5559c4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The common root dir detection was broken, because
of an inconsistent root drive path style:
<srcbase> = /c/dev/qt/5.0/qtbase
<outbase> = C:/dev/qt/5.0/qtbase
Now we don't need ActivePerl anymore.
The Perl that comes with msysgit is enough.
After every Perl function call that returns a file path
we need to normalize it to bring it into a form that can
be used by
- Perl functions that take a path as parameter,
- C++ sources as include file path,
- qmake's .pro files as include file path.
Task-number: QTBUG-25912
Change-Id: If1cf56cc7246a9d6535cd3867222f225d1617712
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
syncqt is run twice when using the top level configure (as in
the CI system). The pri_install_files and pri_install_pfiles
variables are not populated if the file already exists when
generating the compatibility headers.
Therefore, headers.pri ends up with different content in
each syncqt run. In the first run, the compatibility headers
are part of SYNCQT.HEADER_FILES. In the second run, they
are not part of it since the header files already exist.
Change-Id: I4908fb934a639a3c9f6af1796d56a40fd4df2d50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
qpa header files were not installed under qpa/.
Change-Id: I243c3a7e83a342f7485791a1a29b65c9a8f25d6b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
When modularizing our documentation, module level
documentation is supposed to go into a doc
subfolder in the modules sources. Since this folder
also contains header files (snippets), we need to ignore
it in syncqt.
Change-Id: If8159816b042a1a6c810eaa0b6dbd99bf58d8ffa
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
