Commit 6e6f27b6 made it possible to set the PKG_CONFIG variable using
CROSS_COMPILE as a prefix. The problem with that solution is that it makes
pkgConfigExecutable() skip the environment setup for pkg-config as well,
as it expects the pre-set command to be self-contained - which it isn't.
To avoid this problem we need to store the pkg-config define in the
device spec in a separate variable.
Change-Id: Id8ae7fb03d9253be55840e23fe73b30815ee86c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Without this, any test executable requiring a plugin path from
the environment's QT_PLUGIN_PATH will fail to run since the path is
overwritten when generating the 'make check' command, for example:
QT_PLUGIN_PATH=/path/to/qt/plugins \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
A prepend config option is used for *PATH to preserve the envvar
value, so use the same option for QT_PLUGIN_PATH. The command above
then becomes:
QT_PLUGIN_PATH=/path/to/qt/plugins${QT_PLUGIN_PATH:+:$QT_PLUGIN_PATH} \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
Change-Id: I69b43327974915eae52f299fc4001effe93a491a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
proper prefix builds don't have the redundant .dlls in bin (the copy
step is simply omitted), so this is broken. the change would have to be
done atomically with making DLLDESTDIR sane.
This reverts commit 9b2e98245a.
Task-number: QTBUG-50065
Change-Id: I9ce0a2d1147a1a2d4bd2f22e619d5c737864a637
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
this is just an optimization/clarification: variables which are known to
be never empty (like PATH) can be extended with less convoluted code.
Change-Id: Ib365bbec8301673ed1c874979b4de19bc983dab1
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the primary purpose is making env var prepend mode work for unset
variables on windows. this is achieved by using a conditional and delayed
variable expansion. however, the latter is disabled by default and can
be locally enabled only in batch files. therefore, write wrapper scripts
and substitute them for the actual commands. we do this also on unix,
both for consistency and simply because the commands look much less
confusing.
this change is slightly backwards-incompatible, as invoking
qtAddToolEnv() multiple times on the same command will now make a total
mess. also, invoking it on a command that contains 'make' macro
expansions isn't a good idea, so testcase.prf needed an adjustment. the
function is an undocumented internal, so Nobody Should Care (TM).
this also reverts 80ebedecf9, as it's obsolete now.
Change-Id: I8394b77868b495abcf27b688996ca74c40b80994
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
longer term, the redundant .dlls from the libdir will hopefully
disappear. short term, this is a workaround for CI brokenness.
Change-Id: Ia30173355f3aca222d4ca40e7a38c2cf535bbc03
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
qt_framework and {app,lib}_bundle imply darwin, so there is no point in
testing for it.
Change-Id: I9fe48c26c8e271a5575b17e92df8674d3c3a3204
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
there is no particular reason to have them in qt_functions.prf any more,
while the separation made the code harder to follow.
Change-Id: Ie44c9784358f382f7bc863b421ff5b440211d66f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no particular reason to have it in qt_functions.prf.
Change-Id: I88ed1ea937a9a88a4625a6de7bcd3a29957560da
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the rpath applies only to the installed on-device location and is
consequently always the same for all modules, so there is no point in
indirections.
Change-Id: Ia0590552aa317d799a2d3879fd0c0768344b9645
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
When building a module for the first time the paths won't exist as they
are only created when you run "make". However, if you run qmake with
'-r' you need the compiler flags to be available already before that.
Task-number: QTBUG-43175
Change-Id: Ib784c432f29bb8c62b9ef23e59ccb515e1d96f28
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the function is used in our examples and code generated by qt-creator,
so the qt5-specific magic behavior is inappropriate. create a separate
function instead.
Task-number: QTBUG-44595
Change-Id: I4d72cc1e5cbfc274b3210520baa213f4c5479ca9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
for sh, this is usual quoting.
for cmd, this means escaping closing parens - everything else is permitted
anyway.
Change-Id: I1179849d95f1f1f9e4b0d62ecd88917a1327f60f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Whenever a binary is created and linked against a static lib that was
compiled with LTCG, the final linking step requires the compiler flags
so that the pre-compiled data in the shared library can get properly
compiled.
This could happen for a static build of Qt with LTCG, but also happens
frequently for Qt's own build when linking regular libraries and
applications against QtBootstrap or QtPlatformSupport. The linking fails
when the target is a shared library (example: QtWaylandClient linking
against QtPlatformSupport).
The .prl file actually contains the "ltcg" flag, so the best solution
would actually be to process that flag there and add link_ltcg if any
dependent .prl has "ltcg", but I couldn't find out how to do that.
Change-Id: I4a75a14d1dcb8c2089a427285e25d5555df7d7d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
to this end, add a mode to qtPrepareTool() which prepares the primary
variable for system() use (instead of use in makefiles).
Task-number: QTBUG-41032
Change-Id: If6aa6c206a70ecdbc2ea05bbb3cb470414fb02b1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This follows the discussion at:
http://lists.qt-project.org/pipermail/development/2014-June/017225.html
Qt WebEngine will have a version of 1.0 when released with Qt 5.4.
The library name is currently libQt1WebEngine.so.1.0.0 but it should
rather be libQt5WebEngine.so.1.0.0 to represent Qt's major version
releases as a whole and not the major version of the module. This
prefix essentially expresses the module's dynamic linking
compatibility with other Qt modules.
This only makes sense if each major module release will be compatible
with a single Qt major version only.
All published modules currently already have 5 as their major version,
except qtenginio which doesn't use a Qt prefix, so this change has no
effect except for qtwebengine.
Task-number: QTBUG-30910
Change-Id: I894e7a367624c7fc263cf08104173a82eafd1439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
instead of adding all possible plugin paths (for which QMAKEMODULES
wouldn't have been a reliable source anyway), only add the paths of
plugins of the necessary types.
this necessitates that we create qt_plugin_<foo>.pri files also in shared
builds of qt when making a prefix build. we don't install them unless it's
a static build, though.
Change-Id: Ib56b009562a7131d4dc4dfc259b34ec6581b0f77
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we need to store commands with system path separators in the .pri files,
as we might clobber windows command arguments if we just converted
separators later on. and we can actually do that, as the path separators
are actually bound to the host system, not the shell.
we also need to shell-quote the commands, as whitespace, and more
commonly windows path separators in an msys shell, would break things.
we delay this to the last moment possible, as it does depend on the
shell.
Change-Id: I1fe6b63aebd5663b72492c32928ec397f86e336f
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
"system" refers to the system's native shell, which is what qmake's
system() invokes, and whose convention by far most commands invoked from
a makefile will need.
"shell" refers to the shell invoked by make, which diverges from the
system shell only when qmake/mingw32-make is called from an msys shell.
its conventions need to be used for anything the shell itself does
(e.g., assembling env variables, but also command line argument
unquoting) and the commands the mkspec sets according to the shell
(e.g., QMAKE_MOVE).
Change-Id: I0000aa9417c199cf8a810619d31ded24bb0675f9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Makes it possible to join two separate builds, and opens up for using
exclusive builds to do this.
Change-Id: I87ccbdd55511fdfbef3fe8b581f40525ebf077ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
module names use dashes, but the internal module representation uses
underscores, so we must translate.
Change-Id: Ib6983d3731e7dae2a4d6232f8a5202390fd425e9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
instead of being magic attributes of the main modules, the privates
are now proper modules of their own.
this cleans up some code paths, is more mappable to other build tools,
and enables private modules to depend on other private modules.
note that the library path is needed even in the "empty" private
modules, as in the framework case that's where headers are found.
consequently, the modules need to be explicitly marked with the new
"no_link" flag. this required some reorganization of qtAddModule().
Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it was introduced as a hack to simplify writing tests, but the change to
make use of it was backed out of testlib and nobody seems to care.
Change-Id: Icc86621b865276e86593afdb923247bbdca19d49
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
under normal circumstances, any errors will be noticed already by the
pkg-config --exists call, which is silent anyway. therefore this doesn't
change anything in normal qmake usage.
however, lupdate's and creator's evaluators skip the --exists calls and
subsequently invoke the normal query, which then prints useless noise to
the terminal.
Task-number: QTBUG-28159
Change-Id: I536412060f3830aafeb0587f855cd6af11227bca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the previous attempt broke ActiveQt, as it actually has public modules
without headers (they are provided by a common base module).
so explicitly mark the internal modules as such instead of applying
heuristics.
Change-Id: I8d8a2ee66f02c3444da2036a497e7f382f089f62
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
if a private module was used without the suffix, it would not add any
include paths, but the library would be still added. as long as the
includes were written as <Module/private/Header>, this would not become
visible, as the public modules would add the common include path ...
however, this soon won't be the case for mac frameworks any more. this
change makes the problem visible early on.
Change-Id: I8b1a20313ad736cb49507f07fa623e9aa812f651
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's cleaner, and it makes it possible to actually have a single else
branch.
Change-Id: I5ef917b678e2bd5a2face8ee19e942e5e952aa80
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
don't mess with the -F linker flag manually. qt headers include other
headers via the canonical Module/Header syntax, which means that the
compiler also needs the -F flag. QMAKE_FRAMEWORKPATH does exactly that.
Task-number: QTBUG-29003
Change-Id: I5f4af1a462697cd6996c54436ccdb9fc2b216020
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the evaluator has the bug that function arguments are inherited.
work around that by passing an explicitly empty 3rd parameter to
qtAddTargetEnv().
proper fix upcoming in less critical branch.
Change-Id: Ic45cc890abaa6271985590d4ebe02c96bff6dec4
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qtAddModule() always returns true anyway.
the real checking is done by qtAddModules() and qtAddLibrary() itself.
Change-Id: Ieed821acc36dc57ca52aec3e6b2dd6513be9b6c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
