Adding the toolbar to the main window leaves it up to the main window
how to handle ownership and placement of the toolbar.
Pick-to: 6.5
Change-Id: Id429cbad9d5973931a86fcb899684e3651694fbb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
That's not fit for an example...
Task-number: QTBUG-110622
Pick-to: 6.5
Change-Id: Ib196d61867f95f3ff2e45841509d49df9360ad25
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Using seconds because then they all have the same type, even if
all-but-one could use minutes.
Delete one unused interval value.
Task-number: QTBUG-110622
Pick-to: 6.5
Change-Id: I66b456de8a4b867859e9e2b13ce72e8ec691c79a
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
... and use QtEndian instead.
The conversion would be done even on a big-endian system, so the
example would not work correctly on such machines.
Task-number: QTBUG-110622
Pick-to: 6.5
Change-Id: I6a660ff68fa5a8d9b4c1faf9e264d937c605c47e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As a networking example it doesn't contribute much. But it has some
interesting uses of widget/events
Pick-to: 6.5
Change-Id: I194d32e6a304ae41819c20751e9f1ee1d9b5abdb
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It's not a very well written example, using (largely unneed) hacks to
implement what it does. It's also misleading - the syntaxhighlighter
example is a better showcase for building a useful code editor.
Move it to manual tests.
Fixes: QTBUG-111025
Pick-to: 6.5
Change-Id: I405d41688235bf3e9a08373e716769f26d02fec6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The example follows bad and outdated practices:
- running time consuming and I/O heavy workload in the GUI thread
- calling processEvents to keep the UI responsive
- showing results only at the end of a search rather than continuously
Perhaps this example can be rewritten at some point to apply modern
practices (at least use a thread and emit signals), but it seems
to have low overall educational value.
Moving it to be a manual test for now.
Fixes: QTBUG-111002
Pick-to: 6.5
Change-Id: Id630fd4599096448ea4f96bcbf977b11a039796f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The example is 90% boiler plate for subclassing QFrame and providing
a bit of GUI to change the size of the label using sliders. The
interesting bit is a block of 25 lines of code, so turn those into a
snippet and add that to the QTextLayout overview documentation.
Fixes: QTBUG-111011
Pick-to: 6.5
Change-Id: I6e97b2ea47b553c8d998ad185cfac006721ef7ee
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Includes should be ordered from most specific to most general. This
means that project-specific includes always come before Qt includes.
This example didn't follow that guideline. Fix.
Amends 88e8094f18.
Task-number: QTBUG-108857
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: Iafdae9dd8e70ff99882c4344a023a21d15fa3c54
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A QString is not a full representation of a Level, so the
Level(QString) ctor should be explicit.
Pick-to: 6.5 6.4 6.2 5.15
Task-number: QTBUG-108857
Change-Id: I24b705139e61c4aaf59cb0aad3b536013e0d07df
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Includes should be ordered from most specific to most general. This
means that project-specific includes always come before Qt includes.
This example didn't follow that guideline. Fix.
Task-number: QTBUG-108857
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I42727ff8bdef5336368cde349cbcb8d10bb6289f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And add the macOS specific key.
Pick-to: 6.5
Change-Id: I1e0446a1927ef530322388417b9300ae287752c3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
These files should not change the outcome of the build process, but are
merely added to better support the CMake and Android integration in
Qt Creator. Also those files were previously listed in the OTHER_FILES
section of the qmake project files.
Change-Id: Id3d403130ee8800ed6b0877f9f1c3dd1f28b46b7
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This is almost exactly the same as the "Analog Clock" (widget) example.
"Analog Clock Window Example" demonstrates:
* How to render to a QWindow (covered by RasterWindow example)
* QPainter and transformations (covered by Analog Clock example)
* How to use QTimer (covered by Analog Clock example)
Pick-to: 6.5
Change-Id: I7f20a29798830ed6345eca250e4139cb314cab84
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
It gets hard to read like that.
And update mentions of 'SSL' to 'TLS' in the message while we're there.
Task-number: QTBUG-108874
Pick-to: 6.5
Change-Id: Ia7b27bfb3d99391b14ed396ca9a6400621022bf6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Otherwise the finalizers won't know which libraries we're linking to.
Pick-to: 6.5
Change-Id: I886c46443b7289d6e2c7d824767ed5e34a0a1fbf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It demonstrates timerEvent() and some QFontMetrics
There are other examples that demonstrates this
Pick-to: 6.5
Change-Id: I4ad6f30c8ef93c995f980545ed88ab13b9aa9c7d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The "undo" example didn't show anything that the "undoframework"
example doesn't, and the latter is more comprehensive and properly
documented. "undoframework" also uses QGraphicsView instead of
inventing its own diagram widget.
However, the "undo" example created a nicer UI with toolbuttons,
icons, and the undo view in a dock widget, so reuse those elements
in the "undoframework" example instead.
Update the documentation quoting tags accordingly, and clean up
a bit.
Pick-to: 6.5
Change-Id: I3c91feecbd5fe3e5900838b0b51f9fe7bd190280
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The hand-rolled loop produced incorrect output and was subsequently
rejected by trackers.
The torrent example doesn't support modern features though, so it's
still a bit hit-or-miss whether a torrent will work. E.g. downloading an
Arch iso does not work since it relies on DHT, PeX and HTTP seeds.
Fixes: QTBUG-109798
Task-number: QTBUG-110622
Pick-to: 6.5
Change-Id: Ica40fb9205f09d135407a160a28a45d06a418176
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If a proxy is configured on the system then we will request credentials
if needed.
Task-number: QTBUG-108874
Fixes: QTBUG-106245
Pick-to: 6.5
Change-Id: Icbea491492cde4634421b1a1e722a3768d56dec8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In Qt 6 it is unset by default.
Task-number: QTBUG-108874
Pick-to: 6.5
Change-Id: I35af9d7c1517fd393710b7b1b978d3f39c61acf0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
As a drive-by: print the path with native separators
Task-number: QTBUG-108874
Pick-to: 6.5
Change-Id: I73164acb159d1a45960e16d5f57996e8c27257f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It can do more than HTTP but let's keep the naming simple. Most people
likely aren't looking to do file: or data: or qrc: in this example.
Task-number: QTBUG-108874
Pick-to: 6.5
Change-Id: I8a822640f4a8015ebf6c56cb6a614d6426e8a912
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add TARGET instruction in property setter, used in debug mode on macOS.
Task-number: QTBUG-107842
Task-number: QTBUG-109227
Change-Id: I8704b7009c36ea8ddbf8773abfaf2b5f34f728ac
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A few things:
- Improved the documentation by adding a CMake section, briefly
describing the process of adding the plugin, and placing it where it
should be.
- Write a note about the case where the style may be overwritten at
launch, and how to set the a new style using a CLI
- Improved the CMake build such that it creates the App Bundle
correctly, and also works without an App Bundle as well.
- Changed the example, and plugin such that now instead of a QPushButton
we have a QTextEdit, and change the text color.
- Replaced the application screenshot
Fixes: QTBUG-107842
Fixes: QTBUG-109227
Change-Id: I161a91b27df016ff6230fac3871b79d2dfbdf18a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
One of the examples were using a different version than the others.
Though QString's formatting probably didn't change since then so
it was no problem.
Anyway, pretend like we're releasing it now for the first time and
set 6.5 on all of them
Task-number: QTBUG-108875
Pick-to: 6.5
Change-Id: I28b496ab3d8ff54c503a032ba15882cdf3d5eccf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Ends up shortening the loop, making it easier to read at a glance.
Pick-to: 6.5
Task-number: QTBUG-108875
Change-Id: Ia12a994259b00e9b57f2de48124be9cb38553bf5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
As a consequence, also had to add some suppressions:
-Wno-padded (this warning should almost never be responded to)
-Wno-c++98-compat (we want to use c++17 features)
-Wno-weak-vtables (IMO not worth fixing for an example)
Pick-to: 6.5
Change-Id: I28ae4456c0221ad2370879a691f6343affff138b
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
The example didn't show anything useful, and seemed more like a
manual test case.
Pick-to: 6.5
Change-Id: Ia71f39b26943aab04b6895e63b6eed50dd084bfd
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
On small screen devices such as iPhone targets, the save file dialog is
using a non-native dialog, and it doesn't fit the screen real estate to
the extent that the [Ok] button is clipped away.
In addition, the open file dialog and the save file dialog doesn't
cooperate very well on platforms such as iOS without more plumbing.
Since using the file dialog is out of the scope for this example we
remove all usages of it.
Pick-to: 6.5
Change-Id: Ie165355ed0b671d93e44d2d55791156367b0ea5c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The example overrides QWidget::resizeEvent() without using the
QResizeEvent * argument. This results in a compiler warning.
This patch marks the argument unused.
Pick-to: 6.5
Change-Id: I647d0eda7d895e70ed6f232960aec992f5e37b6c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The Qt namespace should be used for types defined in the Qt library,
not for user types.
Pick-to: 6.5
Change-Id: I6df0ca054888f4a65b19a9cb44324321d1dcfad8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also, adjust line length to be < 80 columns and make link
parenthetical.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-107026
Change-Id: I5f7efa5d572103a6fb432d79a52a57363efd9dd7
Reviewed-by: Andreas Eliasson <andreas.eliasson@qt.io>
