The example created two QPropertyAnimation instances that controlled
the same property; this caused a clash for some transitions.
Remove the smoothFlipXRotation and smoothFlipYRotation animations;
they are not needed as equivalent animations are already set as
defaults for the state machine.
Fixes: QTBUG-28081
Change-Id: Ifa7a09d48cd4905df720e3327914320ed74ebae6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Removes QGL paths in sub-attaq and chip examples.
The boxes example depended on QGL and has been removed.
The corresponding module and test directories for the opengl module are now
empty, but has been left there so we can move the QOpenGL* classes there.
[ChangeLog][QtOpenGL] The deprecated QGL* classes have been removed.
Fixes: QTBUG-74408
Change-Id: I52f56409af8f6901359462a7ba162103d051fe3d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cleanup QtWidgets examples:
- use nullptr (clang-tidy)
- use member-initialization
- adjust the style
- fix includes
Change-Id: Ic5448606aacc525ea60b615a69227017aa2b821a
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The flowlayout example crashes on startup because the last change
removed a c-style cast which converted -1 to ~0U ...
Fixes: QTBUG-78861
Change-Id: I0dbed4472b4f68a92b3f92763d00d28baa186f9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Cleanup GraphicsView examples with the help of clang-tidy
- modernize-use-nullptr
- modernize-use-default-member-init
- modernize-use-override.IgnoreDestructors
- Some QList -> QVector changes
- use nullptr
- use normalized includes, remove unused includes
- fix style
Change-Id: I79347e55bfde52f6ae7749cc7093fbd442044020
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Replaced the usages of deprecated QWheelEvent::delta() and
QWheelEvent::orientation() with QWheelEvent::angleDelta().
In most of the examples it is acceptable to use only the vertical
component of angle delta.
- Made the docs APIs to build conditionally, based on the
deprecation version.
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Change-Id: Id4230d483f724af49e4b6349b44881c3944de2a2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The benefit of keeping this code around was to inspire or inform
changes in the areas to take into account possibly missing features
in Qt 5, but at this point that benefit is questionable. We can
always use the history to learn about missing pieces if needed.
Change-Id: I87a02dc451e9027be9b97554427bf8a1c6b2c025
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We introduced WrapOpenGL to link against either desktop GL or GLESv2
depending on the GL feature in QtGui. This works "fine", with two
caveats:
(1) find_package(WrapOpenGL) must be called after
find_package(Qt5Gui) in order for the feature check in
FindWrapOpenGL.cmake to work. That's error prone.
(2) More and more places are popping up, in particular examples,
where GL linkage is required due to inline functions in Qt that
forward to GL functions - such as on Android.
This in particular explains the qmake behavior of making the GL
linkage (desktop _or_ GLES) a public dependency of QtGui, so only
Gui linkage is required.
Those two aspects combined are the nail in the coffin of FindWrapOpenGL
and it would seem much easier to simply make the Desktop GL vs. GLES
decision once in Gui's CMakeLists.txt and let Qt5GuiDependencies.cmake
propagate this well. This allows us to get rid of plenty of special
cases as well.
Change-Id: I3a7e8af49537ce5f215f24470e075a4ae9aeb944
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change introduces a new function called qt_find_package()
which can take an extra option called PROVIDED_TARGETS, which
associates targets with the package that defines those targets.
This is done by setting the INTERFACE_QT_PACKAGE_NAME and
INTERFACE_QT_PACKAGE_VERSION properties on the imported targets.
This information allows us to generate appropriate find_dependency()
calls in a module's Config file for third party libraries.
For example when an application links against QtCore, it should also
link against zlib and atomic libraries. In order to do that, the
library locations first have to be found by CMake. This is achieved by
embedding find_dependency(ZLIB) and find_dependency(Atomic) in
Qt5CoreDependencies.cmake which is included by Qt5CoreConfig.cmake.
The latter is picked up when an application project contains
find_package(Qt5Core), and thus all linking dependencies are resolved.
The information 'which package provides which targets' is contained
in the python json2cmake conversion script. The generated output of
the script contains qt_find_package() calls that represent that
information.
The Qt5CoreDependencies.cmake file and which which dependencies it
contains is generated at the QtPostProcess stop.
Note that for non-static Qt builds, we only need to propagate public
3rd party libraries. For static builds, we need all third party
libraries.
In order for the INTERFACE_QT_PACKAGE_NAME property to be read in any
scope, the targets on which the property is set, have to be GLOBAL.
Also for applications and other modules to find all required third
party libraries, we have to install all our custom Find modules, and
make sure they define INTERFACE IMPORTED libraries, and not just
IMPORTED libraries.
Change-Id: I694d6e32d05b96d5e241df0156fc79d0029426aa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
QLineF::intersect() does not follow the naming rules for functions.
Therefore add a replacement function intersects() instead and also
rename the return type from IntersectType to IntersectionType
[ChangeLog][QtCore][QLineF] added QLineF::intersects() as a replacement
for QLineF::intersect()
Change-Id: I744b960ea339cb817facb12f296f78cca3e7d938
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Replace the deprecated currentIndexChanged(QString) and
activated(QString) with the new currentTextChanged() and textActivated()
functions
Change-Id: I8616354fa06cc63dce6f5cfef0902f4b55981043
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Cleanup the Widgets examples - replace foreach with range-based for loop
in graphicsview subdirectory
Change-Id: I9093b3ae89d73d0b860d29929943881c90074bce
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Cleanup the widgets examples - replace 0 with nullptr
Change-Id: Id4bf119b9a41f6d10117f3a613a6e604128fa196
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Cleanup the Widget examples - use the new signal/slot syntax where
possible - animation, effects and graphicsview subdirectory
Change-Id: I6cbaea6e628eb06f8e0ca6a0b795030a66b83878
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
The prior #if-ery was needlessly confusing; and most of it was
redundant anyway.
Change-Id: I82da1b38c08b93b9dc2220dd7b15ecb7dcc002af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QQuaternion::conjugate() was deprecated with 5.5 and replaced by
QQuaternion::conjugated().
Change-Id: I0176e3db82e9ad793f60e1034a22b11832c8c44d
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Changed old signal/slot syntax to new version
Task-number: QTBUG-60635
Change-Id: I7cbe8851d321b7632a08c098b69a96cc346d5f83
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-53141
Change-Id: I73d8787241291ae6230861a89b38e91d900fede0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Calling the class-method dotProduct(x, x) in order to then take its
square root is a clumsy way to obfuscate x.length() - and lacks its
efforts (clumsy though they are) to limit rounding issues.
Change-Id: I1dc1f38764651bc70c0620e286cb5625f505ddbf
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Especially in examples, where we should show off our convenience
functions, prefer calling these functions over doing arithmetic with
M_PI (or approximations thereto) and 180 (give or take simple
factors). This incidentally documents what's going on, just by the
name of the function used (and reveals at least one place where
variables were misnamed; the return from atan is in radians, *not*
degrees).
Task-number: QTBUG-58083
Change-Id: I6e5d66721cafab423378f970af525400423e971e
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They're deprecated since C++11 and removed in C++17.
Change-Id: Ia2acd9312707bfee96838743645a04ae1780e5dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using std::atan2 gets the right answer directly from dy and dx,
without having to fix up quadrant as we needed to with acos (albeit we
have to negate dy in some cases, to match prior sense of angles). In
the process, it avoids explicit division, which would be an error when
the line's length is zero.
Change-Id: Ia2923159d38834e08e6f15cbff6766ed419fa804
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Examples should demonstrate best practice, and we can use the keyword
directly nowadays.
Change-Id: I1f122e5caceca17290757ffbaf3d660e7daa9ae4
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> examples are lisenced under BSD license, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new BSD header instead of LGPL21 one
(in those files which will be under BSD)
Change-Id: I3ad61caaf07802eb9da7d29eca3fe49d8a51b6a8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Two QObjects had no parent. This caused memory leaks on app close.
Confirmed with the valgrind memory analyzer tool from Qt Creator.
Change-Id: I9294099ca819be1a9c5b74b3cec5bf197be06433
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add dynamic GL and remove warning about ANGLE since that
package no longer exists.
Task-number: QTBUG-46103
Change-Id: Icf93d1105434395a3c9ad61bb8c921fcedfc7137
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Including math.h can pollute the default namespace, and break
some compilers if cmath versions of the method are declared as using.
Switching to C++ math functions also greatly simplifies handling of
float qreal as C++ automatically chooses the right method.
[ChangeLog][QtCore][QtMath] qmath.h no longer includes math.h, so any
sources depending on that indirect inclusion may fail to build.
Change-Id: I4d0e331dafba354ec05dc5052e61ef4ff8d387fe
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
We've been setting the -Zm argument since the dawn of times (even before
the first git commit). Anyhow, MSDN from VS2008 onwards indicates
that this is not needed:
"In earlier versions of Visual C++, the compiler used several discrete
heaps, and each had a finite limit. Currently, the compiler dynamically
grows the heaps as necessary up to a total heap size limit, and requires a
fixed-size buffer only to construct precompiled headers. Consequently, the
/Zm compiler option is rarely necessary."
[ChangeLog][Compiler Specific Changes] Visual Studio: -Zm200 (an option to
specify the precompiled header memory allocation limit) is not added anymore
by qmake to the compiler calls. If you encounter an C1076 compiler error you
might need to re-add it in your .pro file.
Change-Id: Ia4bec7eba09d893a7d81886a1814602b9ce7563c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This patch replaces the old Qt logo with the new, flatter one.
The PNGs were optimized via: optipng -o7 -strip "all"
Task-number: QTBUG-41685
Change-Id: I51983a45144373bf7aee31a32990ecbb2582f488
Reviewed-by: Robert Loehning <robert.loehning@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QOpenGLWidget is now public.
In addition Qt::WA_AlwaysStackOnTop is introduced to support the
special case of semi-transparent QOpenGLWidget or QQuickWidget on
top of regular widgets.
hellogl_es2 becomes the qopenglwidget example. This example performs
painting both via QPainter and native GL commands and has the OpenGL
widget combined with other, normal widgets.
The widget stack receives some changes when it comes to renderToTexture
widgets like QQuickWidget and QOpenGLWidget. Calling update() will now
result in a paint event, which is essential for QOpenGLWidget since we
want it to behave like a regular widget. The dirty region handling is
extended specially for such widgets due to performance reasons.
(an OpenGL content update must not result in any backingstore painting,
and is thus handled as a different kind of dirtiness)
[ChangeLog] Added QOpenGLWidget. This widget serves as a replacement for QGLWidget.
Task-number: QTBUG-36899
Task-number: QTBUG-40086
Change-Id: Ibf7f82fea99b39edfffd2fc088e7e0eadbca25cf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Q_DECL_OVERRIDE (which expands to 'override' for supported compiler)
helps to declare the intent (that it is an overridden function) and
force compilation error when there is no such virtual function in the
base class.
The examples should show the best practice of having it, as it may save
the programmer quite some time in case of change of API or typo in the
function name or arguments.
This change was done automatically with
clang-modernize -add-override -override-macros
And fixed MSVC compilation by removing inline for TorrentViewDelegate::paint
Change-Id: Ice66ae93fae571266f908703d5b8892b2c1ebb1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Examples using OpenGL 1.x cannot be migrated. Therefore, similarly to ES
builds, we just disable them.
Change-Id: I76e888d2ecfb2582ae35853d9dcdd0cb686fddc6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Qt Simulator is no longer supported with Qt 5.
Change-Id: I0f98351d482dd0554ea0754746d56f94ee6bf22f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make sure that people get an understandable error message when
trying to compile the boxes demo with e.g. ANGLE.
Task-number: QTBUG-30406
Change-Id: I0ba0e26e424d768f95d7977862d9f2c4e85b41fb
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
move QT+=widgets (and printsupport) statements before the install
statements, and de-duplicate some cases.
also move some TARGET assignments to a more conventional place.
Change-Id: I6140d8611680f66c24490e5894e4eb90cae95635
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's confusing for the users if the examples' project files contain code
to install their own sources. also, this constitutes an enormous code
duplication, and lots of mistakes. consequently, automate it.
more or less as a side effect, this also removes the entirely meaningless
target installs in subdirs projects.
Task-number: QTBUG-28184
Change-Id: I9fc1367a06db9e2c46aeb67d68729a4f67163ef9
Reviewed-by: hjk <qthjk@ovi.com>
