Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The previous approach of having the signalbug helper in a subdirectory did
not work for shadow builds, as QFINDTESTDATA would not find that dir. By
putting both test and helper into the same directory, the helper will be
found in the test's current working directory.
The second problem was that not putting executables into debug/release
subdirectories might have lead to the WinRT AppxManifest being overwritten
by the wrong configuration. When Qt is configured with -release for
example, it was possible that the debug manifest (Manifest files are
always created next to the target) is written last and thus contains
debug VCLibs as a dependency.
Change-Id: Ia39315432860405642542449296c16dd2ae9fa9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Sometimes it is hard to find the line, when the warning
"QObject::connect: invalid null parameter" appears in the log.
This change adds the class names of the sender and receiver
to give a hint where to search for the wrong call to connect.
Change-Id: I00cead7d943f96d60f198cb3f0bed34ba10285c5
Reviewed-by: André Hartmann <aha_1980@gmx.de>
old style connects have protection against null sender and null receiver,
but new style only had against null sender.
Change-Id: Ie555ac078412918e60c3b60830fe1f3abfb7f5af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Also drops a few instances where the dependency was purely runtime,
especially for examples.
Change-Id: I2a0476f79928143596bdb3b8f01193af90574ae8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The prior test deemed there to be narrowing if source and destination
integral-or-enum types didn't have the same signedness; but all values
of an unsigned source type can be represented in a larger signed
destination type, so there is no narrowing in this case.
Updated QObject test-case to match.
Change-Id: I517a5997adcad70e185d7469a8d26788e463cb75
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
A check "just in case" -- we don't want leaks nor crashes
due to double deletions, and so on.
Change-Id: I24f1a486f0d438595bbe352ab780b07c5d53acbd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes very little sense that one needs to have a debug build
of Qt to debug QObject issues in application code. At this date
we don't even offer debug builds for Linux systems, and anyhow
one might want to debug an application running against a
release build of Qt.
[ChangeLog][QtCore][QObject] QObject::dumpObjectInfo and
QObject::dumpObjectTree are now fully functional even in a non-debug
build of Qt.
Change-Id: Ifddd3023ffc82f3dc3928a7a94d4970e2fb1b44a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
One of the good features of the new connection style is that
implicit conversion is performed for the connection arguments.
However, this is also a bad feature when it comes to the old
C remnants in the C++ language: for instance, doubles implicitly
convert to ints, possibly losing precision (and GCC/Clang do not
even warn about those under -Wall, only MSVC does) or even
triggering undefined behavior.
For this reason, when using braced initialization, C++11
disables narrowing conversions or floating/integral conversions.
Use this feature when checking the arguments of a PMF-style
signal/slot connection. Technically this makes the program
ill-formed, however GCC still accepts it (but at least
warns under -Wall).
Hence, add a way to disable these implicit conversions.
This is a opt-in and guarded by a macro, as it's a source
incompatible change.
[ChangeLog][QtCore][QObject] The
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT macro has been added.
When using the new connection syntax (PMF-based) this macro
makes it illegal to narrow the arguments carried by the signal,
and/or to perform floating point to integral implicit
conversions on them. When the macro is defined,
depending on your compiler a QObject::connect() statement
triggering such conversions will now fail to compile.
Change-Id: Ie17eb3e66ce0cd780138e60d8bb7da815a4ada83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In all other forms of disconnecting this is done. We also know the
signal index, so there is no reason not to do this.
Change-Id: Ic8b042cd8f45dbff74b42ee30c384a84bef78b20
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
...if a PMF connection had already happened. Since UniqueConnection
isn't implemented for non-PMFs (functors and lambdas aren't comparable,
even if static member functions or non-member functions are), we pass a
null pointer for comparison argument. The disconnect() code already
protected against a null pointer there, but not the connect code path
with Qt::UniqueConnection
Change-Id: I87e17314d8b24ae983b1fffd145324beced0494d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
The behavior was different in the variadic template code and in the C++98
code. The code without variadic template support was not copying the functor
object (e.g. a lambda) before calling it.
However, in the variadic template section, QtPrivate::FunctorCall::call
took the functor by value instead of by reference resulting in a copy.
QtPrivate::FunctorCall::call is a helper function for
QtPrivate::FunctionPointer::call which is only needed for variadic template
expension.
[ChangeLog][QtCore][QObject] If the compiler supports variadic templates,
no longer copy functor connected to a signal each time the signal is
emitted. Restoring the C++98 behavior.
Task-number: QTBUG-52542
Change-Id: I3ca20ef6910893b8a288e70af7de4c7b69502173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
