mingw is not msvc, and nobody in their right mind would expect it to
behave like it.
[ChangeLog][Important Behavior Changes][qmake] Qt configure and qmake
used with a MinGW spec will no longer emulate MSVC by picking up the
INCLUDE and LIB environment variables. Use the -I/-L configure options
to pass additional paths, as you would under Unix.
Change-Id: I533bb97de34d14dcbd45e0416283a79f44096c67
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this allows LD_LIBRARY_PATH to take precedence over the hard-coded
rpath, which is the only sane thing to do (which is also why i'm not
adding an option to disable it).
this behavior is consistent with non-linux systems.
the windows version has no auto-detection, just like for gold linker
usage.
Task-number: QTBUG-3069
Change-Id: Ief9ba032291c898d75d76ecc740390954382a804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Test each include file directly, instead of doing a large #include. This
verifies that each header is compilable on its own. One big advantage of
doing it via a special compiler in qmake is that we skip pre-compiled
headers, which has hidden build errors in the past.
This solution is implemented by making syncqt produce a second list of
headers. This list is the same as the list of headers in the source
code to be installed, minus the headers that declare themselves to be
unclean, via the pragma:
#pragma qt_sync_skip_header_check
This mechanism is applied only for public libraries (skipping
QtPlatformSupport, an internal_module).
This test is enabled only for -developer-builds of Qt because it
increases the compilation time.
On QtTest: the library only links to QtCore, but it has two headers that
provide inline-only functionality by including QtGui and QtWidgets
headers (namely, qtest_gui.h and qtest_widget.h). If those two modules
aren't getting compiled due to -no-gui or -no-widgets to configure, we
need to remove the respective headers from the list of headers to be
checked. If they are being built, then we need to make QtTest's build
wait for the headers to be generated and that happens when qmake is
first run inside the src/gui and src/widgets directories.
Change-Id: I57d64bd697a92367c8464c073a42e4d142a9a15f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When cross-compiling, locateFile() needs to look into the XQMAKESPEC
directories instead. Otherwise, this will cause checkAvailability()/findFile()
to report wrong results.
Change-Id: Ia1b566b70cff039d8fd540bde3c7b4707338348a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This regression was introduced by commit
c3e50db199. It is also necessary to pass QT_NO_SHAREDMEMORY and
QT_NO_SYSTEMSEMAPHORE when building on Windows.
Change-Id: I584cc07de013c5797e096fbda983167268789c8d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This change adds missing variables in mkspecs/qconfig.pri about gcc
compiler version when using mingw: QT_GCC_{MAJOR,MINOR,PATCH}_VERSION
This is needed in case CONFIG += c++14 is used.
Task-number: QTBUG-44142
Change-Id: I34c27f9154bb745a8ee75c777a0acbdbc5bda5a9
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Support statically linking the MSVC/mingw runtime libraries without
manually tweaking mkspecs. This is helpful for projects like the
installer framework.
MSVC does not support mixing MT[d]/MD[d] flags in different
compilation units. The static_runtime option is therefore added
to both QT_CONFIG and CONFIG.
Change-Id: Ifd6dc9c362090457de8e2c62477d0445f9479722
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Neon support needs to be enabled unconditionally in mkspecs, so removing
-neon and -no-neon command line options from configure app. It now has
the same functionality as configure script.
Task-number: QTBUG-44690
Change-Id: Iaf5bf7ac4e11fcb798f643660e48a4ed3ce1036b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
apart from being more readable, it has the side effect of being resistant
to spaces in the build path.
Change-Id: Id12603c3a96765913e747fba4070d49de0705315
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This engine has been regarded "experimental" for a long time, but
it is in active use by some applications and rather stable.
While if may be replaced by FreeType at some point, if support
for Microsoft's colored fonts is introduced there, at this point
it really doesn't make sense to call it "experimental" anymore.
Change-Id: I038d71b121e90bd7b4dbc6d0afa7b14c9b824b08
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We've been setting the -Zm argument since the dawn of times (even before
the first git commit). Anyhow, MSDN from VS2008 onwards indicates
that this is not needed:
"In earlier versions of Visual C++, the compiler used several discrete
heaps, and each had a finite limit. Currently, the compiler dynamically
grows the heaps as necessary up to a total heap size limit, and requires a
fixed-size buffer only to construct precompiled headers. Consequently, the
/Zm compiler option is rarely necessary."
[ChangeLog][Compiler Specific Changes] Visual Studio: -Zm200 (an option to
specify the precompiled header memory allocation limit) is not added anymore
by qmake to the compiler calls. If you encounter an C1076 compiler error you
might need to re-add it in your .pro file.
Change-Id: Ia4bec7eba09d893a7d81886a1814602b9ce7563c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
To ensure QtCore can be rebuilt and get the exact same results,
it is undesirable to hardcode the build date into the library
Also deprecate QLibrayInfo::buildDate since it is relies on the build
date. QLibraryInfo::buildDate was originally meant for evaluation
licenses and such, but isn't used for that any longer.
Change-Id: I98e91ca3e55f877e6ac0e02de289dc29422fc9da
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
As default, configure.exe checks if ANGLE is available and prints a warning
if not. This isn't needed if the target platform is Linux.
Change-Id: I2966965ea194c61bf9847e1ee130f2e765d5b0aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It will be used on Unix systems if the required dev package is
present. (Detected by a configure compile test.)
You can configure with -no-libproxy to avoid the dependency.
It will not be used on OS X or Windows, as we already implement
the native API for getting proxies there.
Currently we use whatever PAC runner is provided by the distro
for running PAC scripts - if we want to run PAC scripts using
Qt, then we would have to implement a pacrunner plugin to libproxy.
Note that their webkit pacrunner is using javascriptcore already.
Tested using the libproxy 0.4.7 that is included in Ubuntu 12.04.
Re-tested using Ubuntu 14.04 which ships libproxy 0.4.11.
It works except when both socks and http proxies are configured in
the manual settings - in that case libproxy returns only the socks
proxy. This seems to be covered by libproxy issue 119.
[ChangeLog][QtNetwork] Introduce libproxy backend for Unix platforms,
enabled automatically if the required dev package is present
Task-number: QTBUG-26295
Change-Id: I521c0a198fcf482386ea8a189114a0077778265c
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds a fallback platform OTHER to the platform-enum, which
applies when -xplatform is set to an unsupported target, e.g. Linux.
Without it, it would fall back to WINDOWS, with the consequence
that logic like platform() != WINDOWS would break a proper
configuration of Qt.
Change-Id: Ie34522e23e375da6c24f66b3410638f85724a0f9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
these reflect the on-target paths (unlike /raw, which are host paths, just
without the -sysroot). this is necessary for anything deployment-related,
starting with RPATH.
Change-Id: I13d598995d0e4d6cb0dc1fc7938b8631cf3e3a95
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this cuts down the bloat in the binaries and the binary patching
requirements in the installer.
as a side effect, the sysroot and makespecs are not binary patchable any
more as well, which is ok, as the installer does not do it anyway.
we now also warn if -[host]<foo>dir is not a subdir of -[host]prefix, as
putting things outside the prefix is anti-thetical (the obvious
exception being the (unix-only) -sysconfdir).
Change-Id: I878f0e71a4dfcfd55b2f8b1cf3045b98b502569b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the function for emitting paths to .pri files is obviously not suited
for C++ code.
Change-Id: I96386d61334d06997475f044dbeab22a55749cef
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this is consistent with the unix version.
Change-Id: I84e15dd590b4ed9702f8a9dc0e8b655c930588d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we don't actually support qualified specs anyway - all tests assume
that they can use startsWith() on the spec name.
Change-Id: I9dc8688858d4798c3a18c34757318dcd7fd47c57
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With change macro is in line with QT_NO_<feature> style of naming
macros. This way it will also be automatically added to file
mkspecs/qmodule.pri in QT_NO_DEFINES value.
Change-Id: I111d07fd015994290c54e00e8aac2d6dbdb7de9e
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Before:
Could not find output file: No such file or directory
After:
Could not find output file 'arch.exe' or 'arch' in C:/Qt/qt5/qtbase/config.tests/arch : No such file or directory
(it turned out that linking in that directory failed because of a wrong %PATH%)
Change-Id: I948d7f10f7e82f77a08ac9a8db76d97536c42dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Windows configure application was missing the logic to enable
the Android style, so this was missing from the Windows packages.
[ChangeLog][Android] Included Android style on Windows hosts.
Task-number: QTBUG-43302
Change-Id: I6a1423d58d00e7b4d4fd0a3d1a12cce10aa2fc91
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Tested with the Preview release of November 2014.
Differences to the 2013 detection and support:
- Option -Zc:strictStrings is present in both debug and release mode
and is passed to qmake's own build
- New warnings 4456, 4457 and 4458 (shadowing) are disabled
- Compiler supports -arch:AVX2
Change-Id: I9572ff4d4aded4004c1fa5d6f13ffee5462043d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Microsoft hasn't called their compilers .NET since .NET 2003, so NET2005
and up were wrong.
Change-Id: I28fa99d4e10fcc684be3096eb3237c916a80fa31
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This compiler is no longer supported, as the mkspec was moved to
unsupported/ on commit 55c3799bd3, but the
MSVC support in qmake and in configure depend on an exact string
match. So remove the remaining bits.
No changelog because the actual removal happened in an earlier Qt release.
Change-Id: I538345f4184a6af2ea7449052c161afe4eac625c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Default to android-21 when a 64-bit target is chosen, as this is
the lowest API level supported for 64-bit targets.
Change-Id: If4ece23911c3e9e45558906d970ef85a3b18b0bb
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The recent NDKs have included the 4.9 version of the gcc toolchain,
so we default to that instead of 4.8. This is also required for building
for 64-bit targets, since the other toolchains do not support that.
Change-Id: Id6908eb41c8e7cf003a9b134607ab2e55cb489e9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This allows e.g. openssl/openssl.h to be auto-detected if the include
directory is passed via -I.
Change-Id: Ib1d08ab2b7f98b4c08b7d6b66d55a55796f6802d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The code which extracts style assets for the Android style
is licensed under the Apache license, which is not compatible
with LGPLv2.1. It is, however, compatible with LGPLv3. This
means that the Android platform plugin cannot be LGPLv2.1
as long as this code is included.
To minimize licensing confusion, we default to only providing
LGPLv3 for Android. If you want to build a LGPLv2.1-compatible
library, you can add -no-android-style-assets to the
configuration. This will in turn enable the LGPLv2.1 in
the configure output, and it will disable the extraction
code in the platform plugin.
Running the Android style with an LGPLv2.1-compatible platform
plugin will work, but it will look horrible.
[ChangeLog][Android] Default open-source license for
Qt for Android is now LGPLv3. For compatibility with the LGPLv2.1
license, add "-no-android-style-assets" to your configuration.
Change-Id: I6c7b52140f38138520871fa7c69debbb4ee90e6c
Task-number: QTBUG-41365
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
This license file has to exist, since much of the code is licensed under
LGPLv3.
Change-Id: I2795a7cc62f6de65a35921e38d2ab5f8f0233f71
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The static CRT, libcpmt.lib, is not shipped with Visual Studio Express
for Windows (unlike VS Express for Windows Desktop or Professional
versions), causing configure and qmake to fail linking if this is the
only VS installed. By removing -MT (which is on by default) and adding
$(CFLAGS_CRT) to the compiler line, -MD can be added to the compiler
flags via the environment, providing a workaround for the issue.
Change-Id: I5613346d60a3a1889c121f04d53b09fbb147fc02
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Also, remove the -angle-d3d11 configure option, as it no longer is
necessary to select the renderer at build time.
The D3D11 renderer is the default renderer in upstream ANGLE, and has
been shown to be a more reliable solution for developers running over
remote desktop and inside virtual machines. It also provides more features
to the OpenGL ES implementation.
This configuration switch does not disable the D3D9 render; if the GPU
does not support D3D11, D3D9 is used instead.
[ChangeLog][QtGui][Windows] The ANGLE D3D11 renderer was enabled by
default. Systems which cannot use the new renderer will automatically fall
back to the D3D9 renderer at runtime.
Task-number: QTBUG-41031
Change-Id: If894309c07d9309c236b63c36f37679f74375133
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
[ChangeLog][Important Behavior Changes] HarfBuzz-NG is now the default
shaper on all platforms. This results in a better shaping results
for various languages, better performance, and lower memory consumption.
Task-number: QTBUG-18980
Change-Id: I4d9454fc37e9050873df3857e52369dfc7f191b2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The change creates a stub implementation for WinRT, adding the needed
files and classes to build SSL support on that platform.
Task-number: QTBUG-37497
Change-Id: Idc3e8aa91c5eb8a938705f2385d1074fe6c1d83e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This code hasn't been tested for at least 4 years. It's not maintained
and probably doesn't work.
Change-Id: I4b9a5179e34111b400914f91caa6b741b69771bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
