tst_QWindow::positioning() still fails on Mac OS X, and it does so in
several places. Skip this test for now as it causes isActive() to fail
as well. With positioning() QSKIP()ed, all the other test functions
pass:
Totals: 19 passed, 0 failed, 1 skipped
********* Finished testing of tst_QWindow *********
Task-number: QTBUG-23059
Change-Id: I58d036120c0121f515813cd20955ab3b82f81fe1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Should be sufficient to allow implementing the actual functionality in
xcb/cocoa/windows to match the Qt 4 level of tablet event support.
Task-number: QTBUG-25864
Change-Id: Iebcca256dfba841d8976b58fda1b76026d3133a3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Calling handleMouseEvent() with w == 0 implies that the local position
is bogus and instead it should be calculated from the global position
once the target window is known.
Change-Id: If173d0570f6dcc8b7bc5d6f21fa1f69d06d9d702
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
The test was flawed, as it didn't process queued events before checking
for received event counts, which caused window minimum size enforcement
triggered resizes to be missed. Added event processing steps before
critical checks and also increased the size of the windows so that
event counts are predictable also on Windows.
Note that this might also fix the issues this test has on Mac, but I
can't test that.
Task-number: QTBUG-24904
Change-Id: I01a4bd1ddabcf3650a8abff67b03c75b9c40a626
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Declarative used to have some issues when the MouseArea event handlers
spinned the event loop: subsequent mouse events were all lost. Let's
add an autotest also for QGuiApplication to make sure the same problem
won't occur there.
Change-Id: If5c3b4f58dad609efb302d2ca932493680ffdf13
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QTBUG-23059 only affects 2 test functions, not the whole test. XFAIL the
2 failing tests.
Change-Id: I87086a9ec573362625bc090038dfd7c79aeb9426
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This tests that we get the windowModalityChanged() signal as needed, but
not unnecessarily either.
Change-Id: I2232fa9d45c72e472b324b681859b4b0d574b467
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Apparently there are still issues here and there (e.g. in declarative)
with properly recognizing more complex event sequences (like triple
clicks). The behavior of qtbase is correct but we need a test case
that makes sure the functionality will not regress.
Change-Id: I08c558fcfdde0dd06e194b4f0affc6f6896573bf
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Since change 2e4d8f67a8 the need for Map and Unmap events has
gone away, as now the Expose event is used to notify the application
about when it can start rendering.
The Map and Unmap events weren't really used except by QWidget to set
the WA_Mapped flag, which we now set based on the expose / unexpose.
Also guarantee that a Resize event is always sent before the first
Expose, by re-introducing an asynchronous expose event handler. Since
an expose is required before rendering to a QWindow, show a warning if
QOpenGLContext::swapBuffers() or QBackingStore::flush() if called on a
window that has not received its first expose.
Change-Id: Ia6b609aa275d5b463b5011a96f2fd9bbe52e9bc4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Otherwise metacity was crashing when a QWindow was destroyed immediately
after being activated, because metacity was trying to select events
(XSelectInput) for the already destroyed m_netWmUserTimeWindow.
Task-number: QTBUG-24492
Change-Id: Iedbe7bdd6b26110ca8bec6f33525209ae551ffd5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
- Save & Restore style and geometry when switching to
full screen and back since it is not a real state on
Windows.
- Obey the positioning policy in setGeometry.
Task-number: QTBUG-24185
Change-Id: I18dea4fd372e0b2e46273a7a27e0c6f4f4bde771
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Implement the public slot QWindow::close() and add the correspondent test.
Change-Id: If3f07cce3b26640f06fc52d0e4dca875d9894b3d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
To match the previous QWindow::orientation() property which can be
useful to access from QML. Also, removed the automatic translation of
Qt::PrimaryOrientation to QScreen::primaryOrientation() on the QWindow
level, as it leads to a lot of complexity regarding the
QWindow::contentOrientationChanged() signal, and makes it hard to
distinguish between the case where the window's orientation follows
that of the screen, and the case where the orientation just happens to
be set to that of the screen.
Change-Id: I6950d1337b7f929815eff1328181855090d8066b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously we only had QWindow::setOrientation() which was a hint about
the orientation the window's contents were rendered in.
However, it's necessary to separate between the orientation
corresponding to the window buffer layout and orientation of the
contents. A game for example might typically want to use a landscape
buffer even on a portrait device. Thus, we replace
QWindow::orientation() with QWindow::reportContentOrientationChange() and
QWindow::requestWindowOrientation().
Change-Id: I1f07362192daf36c45519cb05b43ac352f1945b5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There is no guarantee the touches will be listed in the same order in
an update: the platform/generic plug-in, the drivers, etc. are all
free to shuffle the list of touch points in each report (even though
the order is fairly stable with most systems).
Therefore, to be safe, move and release events should be generated not
from the first point in the list but from the one with the matching
id.
Change-Id: I6615224cbf2cfdc440143eb3191482a23d85c6a4
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The current way we do it of having the platform or touch plugin send
both mouse and touch events is not ideal. There's no good way to write
an application that works sanely both on a touch-only device and on a
desktop except by restricting yourself to only handling mouse events. If
you try to handle touch events you don't get any events at all on
desktop, and if you try to handle both, you end up getting duplicate
events on touch devices.
Instead, we should get rid of the code in the plugins that automatically
sends mouse events translated from touch events. This change enables
that by making the behaviour fully configurable in QtGui.
Two new application attributes are added to explicitly say whether
unhandled touch events should be sent as synthesized mouse events and
vice versa, and no duplicates are automatically sent as the current
situation. Synthesized mouse events are enabled by default.
We also get rid of the QTouchEvent::TouchPoint::Primary flag, which
was only used to signal that the windowing system automatically
generated mouse events for that touch point. Now we only generate mouse
events from the first touch point in the list.
Change-Id: I8e20f3480407ca8c31b42de0a4d2b319e1346b65
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Unlike keyPressEvent(), mousePressEvent(), etc. the touch events had
no equivalent so one had to fall back to reimplementing event() or
using an event filter. This is now corrected by introducing
touchEvent(). Touch events are finally becoming a first-class citizen
in Qt 5.
Change-Id: Ia2044030154fd5b1b5384f08a3cb1749b798435f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Failing tests are marked with CONFIG+=insignificant_test.
tst_QTextLayout currently asserts, so it has been disabled to prevent
destabilization of the CI system.
Change-Id: I7bd836ee14085689c8a0f0ce8e3c80d81a55eb94
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This commit moves tests from test/auto/ into more appropriate
locations (i.e. matching the locations in the Qt source):
- qscreen and qwindow are moved into gui/kernel/
- qopengl is moved into gui/qopengl/
Note: qscreen is disabled for now since it is broken
on Linux (see QTBUG-22554).
Change-Id: Idcc7a51e78d6d0955bddb9cb4091866659193cc8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
