Use a QTemporaryDir instead of the system-wide temporary directory.
The test is still not entirely parallel-safe (at least on X11) due to
requiring the shown dialog to have keyboard focus.
Change-Id: I628dc6ab52dda49f6957a301eea8944bb9d81453
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Changed one testfunction to use the test's own QTemporaryDir instead of
the system-wide temporary directory.
Change-Id: I6740a7f4ba7f53174cd0730239d8dc088e5111ba
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Maintain the consistency of QWizardPrivate's two members:
QVector<QWizardField> fields;
QMap<QString, int> fieldIndexMap;
during and after calls to QWizardPrivate's
void _q_handleFieldObjectDestroyed(QObject *)
member function. The failure to maintain this consistency
caused an out of bounds access and core dump in
QWizard's field(const QString &name) member function.
QWizard's field(const QString &name) member function expects
the values in the QMap fieldIndexMap to be indexes into the
QVector fields. Prior to this change
_q_handleFieldObjectDestroyed only removed the appropriate
entry from the map and erased it from the vector. It did
not decrement by one all the indexes greater than the index
that was removed from the map and erased from the vector
in the rest of the map.
For example ...
So if initially have the following mapping ...
"field0" -> 0,
"field1" -> 1, and
"field2" -> 2
with fields of size 3. After destruction of "field1" have ...
"field0" -> 0, and
"field2" -> 2
with fields of size 2.
Now attempts to look up "field2" using QWizard::field will
have an out of bounds error and possibly core dump or trigger
an internal Qt assert because an attempt to access
this->fields[2] will be made. It should be accessing
this->fields[1], but does not because the map is no longer
consistent with the vector.
This change adds a decrement by one for all the indexes
greater than the index that was removed from the map and
erased from the vector.
Task-number: QTBUG-25691
Change-Id: Ia2a41027628a65faec4ecdd5da235ddd19746a57
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Rename posFromMove to posIncludesFrame in Widgets and
make the handling more fine-grained; try to clean it up
as soon as the frame margins are known
in QWidgetPrivate::fixPosIncludesFrame().
- Implement QWidgetPrivate::updateFrameStrut().
- Windows: Handle posIncludesFrame in window creation,
notify changed geometry after setting window flags.
- XCB: Do not change the window gravity in propagateSizeHint()
as this causes the window to jump around. Determine
the gravity in window creation, leave it constant and
fix the geometry when setting instead.
- Store the normal geometry when maximize/fullscreen
state change events are received.
- Remove xfails from fixed tests
Task-number: QTBUG-25331
Task-number: QTBUG-24905
Task-number: QTBUG-24294
Change-Id: I89c7229d86aaf88f02247d63915da7905e4a27ea
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QFontDialog and QColorDialog were ignoring the DontUseNativeDialog. This
lead to a native (Cocoa) dialog created all the time.
Fix the testcase for QFontDialog. It needs the DontUseNativeDialog flag
set.
Task-number: QTBUG-24321
Change-Id: I159c1ad057bac38226f1e01a56b15f142650bfd8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test hangs in CI, but so far I've been unable to reproduce the
problem. Disable the test for now so that this test does not block
changes that bring in needed functionality.
Task-number: QTBUG-25496
Change-Id: I81faa574b6d7bcab2e32becc2af0f71006c7dd9c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When destroying a window immediately after showing it, we can sometimes
provoke a crash in Cocoa after the show-window-animation has finished
(which appears to assume that the window's view will always be valid).
Prevent the crash by not removing the view from the window. When
recreating a window, we explicitly release the old window, but we do not
release the view, so we can freely add it to the new window (i.e. this
does not introduce new bugs related to recreating the platform window).
Task-number: QTBUG-24977
Change-Id: I466ce75b04785401032a0a2d4a2c494910cd1672
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
When sorting a model recursively, the children of a QFileSystemNode
are extracted from their parent in a QHash order; then filtered,
then sorted (using a stable sort) depending on the sorting column.
This means that the order of the children comparing to equal for
the chosen sort are shown in the order they were picked from the
iteration on the QHash, which isn't reliable at all.
Moreover, the criteria used in QFileSystemModelSorter for sorting
are too loose: when sorting by any column but the name, if the result
is "equality", then the file names should be used to determine
the sort order.
This patch removes the stable sort in favour of a full sort,
and fixes the criteria of soring inside QFileSystemModelSorter.
Change-Id: Idd9aece22f2ebbe77ec40d372b43cde4c200ff38
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This autotest gives different results on consecutive runs, and is
therefore insignificant for the purpose of detecting regressions.
Task-number: QTBUG-24977
Change-Id: I5c4dfd663ce5df6b60ae47a29d332c06e3c0585f
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Make sure that if ShowAlphaChannel option is set then also setShowsAlpha
needs to be set for the panel before setting the current color, otherwise
alpha channel value is omitted.
Task-number: QTBUG-24320
Change-Id: Ifb3822711af8ffd0cf6cb4c8aab2b0020d296663
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This patch renames the functions in Qt5 according to the
notes. It also renames resizeMode to be consistent.
The old functions are both marked with both QT_DEPRECATED
and '### Qt 6 - remove'
All usage of the function within the qtbase are also
changed to use the new functions.
Change-Id: I9e05fa41d232e9ca43b945fcc949987017f3aedd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For some reason, hiding files via executing "attrib +h filename"
process didn't work realiably, so changed the file hiding to be done
via Windows native API.
Also changed the test to use QTemporaryDir to simplify temporary
directory handling a bit.
Task-number: QTBUG-24291
Change-Id: I4f02b16e2f9105bcf5e6c5bf136f55434a26e2f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
All of these tests currently hang.
Task-number: QTBUG-24321
Change-Id: I7664b57f6539d4c03008701da66e193019a4440a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
tst_QColorDialog::native_activeModalWidget() hangs, so skip this test.
tst_QColorDialog::task247349_alpha() fails, so XFAIL this failure.
Task-number: QTBUG-24320
Change-Id: Ie4d69e07063e9a648ec4fa3337274143a52ea3e3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Move palette() from deprecated QtWidgets/QGuiPlatformPlugin
to QtGui/QPlatformTheme, Make it return a const * since
QPalette does not have isNull().
- Initialize QGuiApplication::palette() and
QApplication::systemPalette() from it.
- Do not initialize QPalette from QGuiApplication::palette()
unless app_pal is non-null (default to Qt::black if it is 0).
This avoids initialization order crashes/recursions in the
QPA plugin. Streamline initialization function.
- Remove styleName(), systemIconThemeName() and iconSearchPaths()
from QGuiPlatformPlugin and re-add them as
QPlatformTheme::themeHint().
- Remove styleHint() from QGuiPlatformPlugin, add it to
QPlatformTheme::themeHint().
- Add UNIX themes with factory function (Generic,
KDE, Gnome), taking it from Qt 4.8 code (stripping the
KDE 3 code).
- Implement Windows palettes.
Task-number: QTBUG-24204
Change-Id: Ie27ec035df4f84c42deaffc4816b2e53ce705462
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
There are no rights for typical user or even administrator to write
directly under c:\ root in windows without rights elevation, so
completionOnLevelAfterRoot() test case failed. Changed the test case
to use an existing directory.
Task-number: QTBUG-24289
Change-Id: I6a8dfc9d1d6ae798b3b9049c542b45fdbdbd9a8c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Remove methods that have been marked as deprecated
before Qt 4.6. Keep others, but inline them
where possible and mark them as QT_DEPRECATED_SINCE(5, 0).
Change-Id: If881821ae095f054b31cc13464f19e2007c20ed7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test no longer fails:
XPASS : tst_QFiledialog::selectFiles() '!listView->selectionModel()-
Loc: [tst_qfiledialog.cpp(915)]
Change-Id: Ib790c0f81b3d383117cceceaacbf0c3d6a673404
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
tst_qwidget.cpp will not build/link without tst_qwidget_mac_helpers.mm,
so re-add it to the build as well.
Change-Id: I55130f62c215c4b82683d90456e31fdb09f833a8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It has long since been obsolete in code and removed from the documentation, but
was never marked QT_DEPRECATED. Do so, and inline the implementation.
Change-Id: Ic7bfdaf76269b7f9addeba83e64bc9525c581dda
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Four of the modified files only use functions from network-settings.h
on Windows, and the other three files don't use anything from that
header.
Change-Id: Ifa4b0319d14367735b859e538921fa0eeeccce1a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qabstractprintdialog test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: Ic09a03ed405bf6f85917410a7a86e17f2fe22cba
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Commit 0fd8514a57 ensured that
the showAsTool test function is now properly QSKIP'ed for
platforms where it is always known to fail.
This change re-enables the test case as a whole so that
the passing test function may actually catch real Qt bugs again
(without being ignored by CI).
Task-number: QTBUG-22453
Change-Id: Icfe56558f8c0f4b50dbbc21d9748df6d81fea4fe
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
