On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The code in question is obviously checking for support of QProcess, not
for general bootstrap mode. You can manually disable QProcess, in which
case it is still not available after bootstrapping is done.
Change-Id: Ia99810b8900621911a31912034358a01af4f18a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On POSIX compliant platforms, the default precision we apply to
preserving time stamps is seconds. However we can do better and use
utimensat() - if available - to increase the precision to nanoseconds.
The values are provided by statbuf's st_mtim. This is guarded for
compatibility with older systems, similar to commit
494ced1329.
Change-Id: I6928660230d84f8511bf0f58e268906d2e575e04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise, infinite loops can result, as amply demonstrated by the new
configure (which duly replicated the old configures' behavior ...).
QMakeEvaluator::evaluateBuiltinExpand() now returns a VisitReturn like
all other evaluate*() functions. the string list return value is now an
out parameter; i used a reference instead of a pointer to avoid
adjusting 56 usages of it.
Task-number: QTBUG-13964
Change-Id: I51ca7df8d694c6ffe9d9899cba414b1b46f5ce95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
when the file's effects are discarded, the mention of the file should be
as well.
Change-Id: I894b7e2b887dd34d18533b197bfa9d0d84d647e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the normal mode forces the prompt into a pattern which may be
undesirable.
Change-Id: I01689c7a6573415801862348b32bafc6a609ed4a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can not improve the result from JSON parsing without changing API,
so instead recalculate the line and column based on input and offset.
Change-Id: I54149233f71023aa5d30deff854d6f3406c5c48c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the autotest was also broken, because it was created by pasting the
bogus message into the result ...
Change-Id: I02b8663b96c7d96cdb3c19639e2213e49fd2bcec
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
so far, we "downgraded" only explicit error() output, but other errors
may happen as well while doing semi-exact evaluation of .prf files - at
least hypothetically.
amends 08d0cb6f8e.
Change-Id: I32819a569dbed2dbdb37c5c23bf4a5a18d3c64ea
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
(cherry picked from qttools/ea1a5c3534f089c0e704808a0fb029eda8f753b4)
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this function discards all values that come from a specific file. it
will be needed for configure bootstrapping, but is too obscure to
document it for general use.
Change-Id: I62c18aeb1847712e33d0599dbb0b90ffa1722438
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this goes at the cost of <into> without the subsequent dot not being
filtered before the result insertion any more. that's not expected to
be a problem, as it's not particularly useful to iterate the target
namespace without the dot in the first place.
Change-Id: Ib3497a60613b4c8c26676fe76b731239e427b8a7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Replaces our mix of comments for annotating intended absence of break
in switches with the C++17 attribute [[fallthrough]], or its earlier
a clang extension counterpart.
Change-Id: I4b2d0b9b5e4425819c7f1bf01608093c536b6d14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this is useful when an adequate message has already been emitted by
other means, like various built-ins do.
Change-Id: I092771f55969fad8b214204d666327664727c572
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
these are the two signals unhelpfully suppressed by system(2).
Change-Id: I5e5df9f6d136601f0f36a8d645f90a1cab9995ad
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
when the file name is empty, the path will be returned verbatim. this
must be considered when constructing the return value.
Task-number: QTBUG-54550
Change-Id: Ie108ed52275e66a154ef63bd6f7193f55b3e0454
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that can make sense if a function which determines the availability of
a dependency fails to do so for unexpected reasons.
Change-Id: If6cd113df25aee66830c120a2fab067c822a4543
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
if() would simply "downgrade" a fatal error to a false condition, which
is certainly not expected.
Change-Id: Ie9c54f2bddf588856498bf795007b341b7c9363a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
At least report the error string and the file offset where
the error happened.
Change-Id: Iaa1733593b8af2a7a52b67c0f495731f045d2c11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A bug in the Windows C Runtime causes text mode pipes to drop newlines
sometimes. This bug was hidden because of another bug in rcc which
caused newlines to be redundantly duplicated. When the latter bug was
fixed (commit 53d5811b) the former bug was exposed, causing invalid
vcxproj files to be generated. The Windows bug is described here:
https://connect.microsoft.com/VisualStudio/feedback/details/1902345
The workaround is to avoid text mode, and do the conversion of "\r\n"
to "\n" ourselves (which we were already doing anyway).
Change-Id: I792599a4cd7822f109fa921f02207fb1b144b1d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
just like $$member(), but operates on a string value rather than a list
variable. it is the swiss army knife of cutting, providing equivalents
of left(), right(), mid() and reverse() all in one.
[ChangeLog][qmake] Added $$str_member() function.
Change-Id: I7c7c6c971db402fff41b428d32a4451f45400728
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
this is strlen(), but the name is matched to $$size(), just namespaced
to reflect that it operates on a string value rather than a list
variable.
[ChangeLog][qmake] Added $$str_size() function.
Change-Id: I56c8b863da244e66bd283257a66b197aa73b0e57
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
amazing how we managed to do without it for so long. ^^
the name is intentionally somewhat obscure to avoid clashes, and some
namespacing is good anyway.
[ChangeLog][qmake] Added $$num_add() function.
Change-Id: Ib7648b1f425ef096a87b51f158d0f1409e5c4daa
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while implementing stacks and queues was possible before with the help
of $$member(), these functions make it much more straight-forward.
[ChangeLog][qmake] Added $$take_first() and $$take_last() functions.
Change-Id: I4922a5331780e468a42c663c9ad3c6456a95a6bf
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
we have perfectly good overloads which work with ProString itself, or
at least with QStringRef.
Change-Id: I45f39b8c2f83216f20849dd58eb3b8d78726083d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this also saves some of the cheap but ugly toQString() calls.
Change-Id: Iebe644986501db3878306521c76e4ba2c2fb97b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the only place where this actually saves a deep copy is the evaluation
of if(), but as a side effect the parser is now able to deal with not
null-terminated strings, which is kinda nice as well.
Change-Id: Ib6d08617aa79d2f9eaecd4906d4d548f34bf377d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
saves some more cheap but pointless conversions to QString.
this makes the introduction of the ProStringList::contains(QStringRef)
overload necessary.
Change-Id: Ic61993bd9a4b28fbba1b8e346345fd5f5636c6f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this introduces an ambiguity, so some char* arguments need explicit
QString construction now.
Change-Id: Ic3919a1fa9419bbb3b57dd1aa7eb95643ee59e53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Iterate only once over QJsonObject, create key list by
existing loop instead of create by QJsonObject::keys(),
which contains internal loop.
In common case if loop's statement is lightweight,
then effect of optimization is significant, and vice versa.
Also make addJsonArray() and addJsonObject() functions
more homogeneous.
Use reserve to optimize memory allocation.
Change-Id: Id122cd1becfd34bb06640876b1c79e1d396d2a6b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
