Accounting for the case where `MODULE_ROOT` is set to `.` which then
makes the `get_filename_component` command to return an empty string;
consequently, we cannot find the `config_file.txt`, and cannot process
the features correctly.
Amend f4bf7982a6
Pick-to: 6.5 6.6
Fixes: QTBUG-114085
Change-Id: I55c7529be6caba4691adec80efca8021bd03c500
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The `-sysroot` does not have any effect, and it can be removed.
I added a warning in case someone is still using it.
[ChangeLog][configure] The -sysroot option was removed. Use
CMAKE_SYSROOT or CMAKE_TOOLCHAIN_FILE instead.
Task-number: QTBUG-112951
Change-Id: Ib180b891ca8228ef1ebf9be43f2f6b8b5b5b0ee7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In unity build, when calling qt-configure-module.bat, if we don't pass
an absolute path, CMake will not be able to resolve the header paths in
`*_cxx.cxx` unity headers. So far, this only happens on Windows/LLVM,
and it is probably an oversight on CMake side, as passing a path without
drive letter is perfectly fine in most cases, and CMake can handle it.
We don't need the TO_CMAKE_PATH, as `get_filename_component` also does
the transformation.
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: I474750af13291cbf1a46a12be5fc4a0f6e88accf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If -unity-build-batch-size is not given, we default to CMake's default
which is 8. In QtSetup.cmake, we explicitly set the default to avoid
having it set to OFF in case it is missing, just to make sure that we
don't get any unintended behavior.
Task-number: QTBUG-109394
Change-Id: I19849e9baa507b64fb23847c740e20a7adc61b8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the case of re-doing, `configure` and `configure.bat` pass an extra
parameter to the `QtProcessConfigureArgs.cmake`. As a result, CMake
removes CMakeCache.txt and CMakeFiles/ before the reconfiguration. If
the user is using CMake 3.24 or newer, this is achieved by passing
the `--fresh` option to CMake call. In older CMake(s), CMakeCache.txt
and CMakeFiles/ found in CMAKE_BINARY_DIR will be removed using a
file(REMOVE_RECURSIVE call.
[ChangeLog] The -redo option now additionally removes existing
CMakeCache.txt file, and CMakeFiles/ directory, and recreates them from
scratch.
Task-number: QTBUG-108287
Change-Id: I11a5c8f9df1247d11eb7097552e6764463583346
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And also teach CMake to treat it properly instead of hardcoding the
version number.
[ChangeLog][Build System] The configure script now accepts a new
parameter -disable-deprecated-up-to which is used to remove all
deprecated code from API and ABI while building the libraries.
The version number must be specified in a hex format.
For example, it can be used like this:
/path/to/qt/configure -disable-deprecated-up-to 0x060500
to remove all code deprecated in Qt 6.5.0 or earlier releases.
Task-number: QTBUG-101510
Change-Id: I557cf83e29b867fa1052bb097985e144b5eaf34d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Raise the CMake log level to STATUS when the 'verbose' argument is
passed to the configure script.
Change-Id: I736d95ab66b115f8416eec7f9e2ee96d1580c78d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
ANDROID_NATIVE_API_LEVEL is an alias for ANDROID_PLATFORM and the
Android's CMake docs [1] uses directly ANDROID_PLATFORM so let's use
that as well. Also, NDK r23b seems to have removed the part of code from
android.toolchain.cmake that handles ANDROID_NATIVE_API_LEVEL to set
the correct value to ANDROID_PLATFORM.
With this change, CMake will pass the value from the configure argument
-android-ndk-platform as -DANDROID_PLATFORM instead of
-DANDROID_NATIVE_API_LEVEL. Otherwise, if if -DANDROID_NATIVE_API_LEVEL
is passed directly to CMake, it should work as before.
[1] https://developer.android.com/ndk/guides/cmake#build-command
Pick-to: 6.3
Task-number: QTQAINFRA-4837
Change-Id: I5c21af53ac91e11a27c4b033313d22d1115c1abc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It broke drive-less (no C:\ prefix) paths passed to configure.
Invoking configure on Windows with the following args
qtbase/configure --
-DCMAKE_INSTALL_PREFIX=\Users\qt\work\install
called CMake with
-DCMAKE_INSTALL_PREFIX=\\Users\\qt\\work\\install
saying
Qt will be installed into '//Users/qt/work/install'
and while the build succeeded, installation would fail with
CMake Error at cmake_install.cmake:41 (file):
file cannot create directory:
//Users/qt/work/install/lib/cmake/Qt6BuildInternals. Maybe need
administrative privileges.
Note the double slash in the beginning is likely interpreted as a
Windows share URI / UNC path.
The same would happen when passing -prefix '\Users\qt\work\install'
As a reminder, we want to support drive-less prefix paths because
that's what Qt's Coin CI uses passes to ensure DESTDIR installation
works correctly.
Amends cb7f4030bc
Pick-to: 6.2 6.3
Fixes: QTBUG-94366
Change-Id: I9267b6f784babfbdaeafc65267ba96c75fa24112
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Introduce a new -no-prefix option that can be used to build Qt without
having to install it.
Currently, -no-prefix is already implied by -developer-build, but
-developer-build also implies -warnings-are-errors and
-feature-private-tests, which not everyone might want to use.
Some Qt builders likely use -developer-build for the no-prefix
behavior, hence we introduce a standalone -no-prefix option to offer
a nicer user experience without -Werror and friends.
Previously it was possible to achieve the same by specifying
-prefix $PWD, but that relies on $PWD expanding property in the used
shell.
The new -no-prefix doesn't depend on the type of the shell and
is shorter to type.
Internally this gets passed by configure as -DINPUT_no_prefix=yes to
CMake, and transformed into a -DQT_FEATURE_no_prefix=ON feature.
The feature also gets automatically auto-detected to ON if
developer-build is set, -prefix is either unset or $PWD.
CMake code should still query QT_WILL_INSTALL to decide whether
files need to be installed or not.
As a drive-by, we now also export QT_FEATURE_developer_build to
be available for querying during configuration of other repos
(previously it was only possible to query FEATURE_developer_build).
Pick-to: 6.2 6.3
Change-Id: Iaa6c8d8ae2b736282e9949d2a5d7f412e290a253
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Yield a warning instead of an error that -skip and -submodules have
no effect in a per-repo build.
Amends acaba63260
Adjusts to 11ae0e772c
Pick-to: 6.2 6.3
Change-Id: Ic26b0ba29e48be5162f13ad75308f8358d8878e3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Specifying the options would do nothing, so it's better to error out
early in case the developer accidentally added them.
Pick-to: 6.2 6.3
Change-Id: Ia516468a22c3c48e9e84dc78e522e8870186d96b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The option is used to specify a list of Qt repos (git submodules)
that should be included in the configuration of a top-level Qt build.
The option takes a comma-separated list of qt submodule names e.g.
'qtbase,qtsvg,qtdeclarative'
It can also take a single value like 'qtbase' or 'qtquick3d'.
Each specified submodule and all of its transitive dependencies will
be included when configuring the top-level Qt build (assuming that the
submodules have previously been already checked out).
Any missing submodules or dependencies will not be automatically
checked out, but rather skipped. This can result in a failed
configuration if a required submodule is missing.
If some optional transitive submodule dependency is not desired in the
build, you can combine the -submodules option together with -skip
options.
E.g. configuring with
-submodules qtdoc,qtnetworkauth -skip qtmultimedia,qtimageformats
will result in a top-level build with the following submodules:
- qtbase (common dependency)
- qttools (dependency of qtdoc)
- qtactiveqt dependency of qttools)
- qshadertools (dependency of qtdeclarative)
- qtdeclarative (explicit)
- qtnetworkauth (explicit)
- qtdoc (explicit)
Pick-to: 6.2 6.3
Fixes: QTBUG-100388
Change-Id: Ie8c47cfd1d1e0e44a27260bf9ddf968531cc1cc0
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This makes skipping a list of submodules more concise.
e.g. instead of passing
-skip qtsvg -skip qtimageformats -skip qtmultimedia
pass
-skip qtsvg,qtimageformats,qtmultimedia
Pick-to: 6.2 6.3
Change-Id: I6a48828b2fd7cec9f6e19988f7b4033333768abb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Previously we passed flags like -ld-fuse=lld only to compile
calls, but not to the link call of a compile test project.
Make sure to pass it to the link call instead by using
check_cxx_source_compiles + CMAKE_REQUIRED_LINK_OPTIONS
instead of
check_cxx_compiler_flag.
Note the flag that is passed is still via passed via the
compiler launcher and not directly to the linker.
Remove duplicate flag handling code.
Pick-to: 6.2 6.3
Change-Id: I1bf90573904a9df83240b6debfee3cc9e425c6bb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This amends commit c5409964b0.
When detecting a variable assignment, we must ignore arguments that
start with a dash. Otherwise, arguments like --prefix=~/Qt are ignored.
Change-Id: I3b143113b94ca0d8af92679c1f567fbcec298349
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's now possible to call configure with arbitrary variable assignments
"FOO=BAR" that get passed as "-DFOO=BAR" to CMake. There is no error
anymore for unknown variables. CMake already warns about those:
"Manually-specified variables were not used by the project: FOO".
[ChangeLog][configure] Users can directly assign CMake variables with
configure, for example "configure CMAKE_CXX_COMPILE=clang++-11".
Fixes: QTBUG-88210
Change-Id: Ib15e63a895df717919dd2b6623fa4d284209776f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The function qt_commandline_assignment and everything related to it is
removed from configure. It was only used in qtbase, and all usage has
been removed.
More general variable assignments will be added in a subsequent commit.
Task-number: QTBUG-88210
Change-Id: I7cfa782e89914f2b0dc0277c46e425c8a825557e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now it's possible to display a configure help screen per module with
qt-configure-module <module-source-dir> -help
Pick-to: 6.2
Fixes: QTBUG-95943
Change-Id: I7d26006246af4b38b5a2ec6deca3f45c5313afec
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The following host-related configure options were unsupported since Qt
6.0 and are now completely removed:
-hostprefix
-external-hostbindir
-host*dir (except -hostdatadir)
-android-ndk-host
Pick-to: 6.2
Change-Id: Ib69d90c40ef546f61bf87b1f443eb9d10f7a5a21
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Ensure that Qt user projects build with sanitizer flags if Qt was
configured with any of the sanitizers enabled.
To compile Qt with sanitizer support enable any of Qt sanitizer
features.
Passing -DECM_ENABLE_SANITIZERS=address to CMake is NOT supported
anymore.
When configuring Qt using CMake directly, pass
-DFEATURE_sanitizer_address=ON
-DFEATURE_sanitizer_undefined=ON
instead of
-DECM_ENABLE_SANITIZERS=address;undefined
When configuring Qt with the configure script pass
-sanitize address -sanitize undefined
as usual.
QtConfig.cmake now records the sanitizer options that should be
enabled for all consuming projects based on the enabled Qt features.
This applies to internal Qt builds as well as well as tests an
examples.
The recorded sanitizer options are assigned to the ECM_ENABLE_SANITIZERS
variable in the directory scope where find_package(Qt6) is called.
The ECMEnableSanitizers module is included to add the necessary flags to
all targets in that directory scope or its children.
This behavior can be opted out by setting the
QT_NO_ADD_SANITIZER_OPTIONS variable in projects that use Qt and might
be handling sanitizer options differently.
Amends 7e03bc39b8
Pick-to: 6.2
Fixes: QTBUG-87989
Task-number: QTBUG-92083
Change-Id: I2e3371147277bdf8f55a39abaa34478dea4853a6
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Automatically set compilers based on old mkspec style target
Pick-to: 6.2
Change-Id: I80404376964a85c6b519657c054d008da47aed91
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The -developer-build had not the desired effect anymore.
That argument must not be hidden from the feature logic.
This amends commit d5c3e1336b.
Change-Id: I96562ea2df43ba7de002e705f28c7cc7edb4a589
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Let -developer-build, -cmake-file-api set up the CMake File API query,
so that the build can be loaded directly into IDE's like Qt Creator.
[ChangeLog][Build System] configure -developer-build now sets up
the CMake File API query, so that a build can be loaded without
reconfiguration into Qt Creator and other IDE's. Pass
-developer-build -no-cmake-file-api to configure to disable this.
Fixes: QTBUG-89487
Change-Id: I69199b8f96da02e42e5610aa6f49881c1582f7da
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Passing this configure argument will generate a JSON file that contains
information about configure options and features.
This file is used by Qt's conan recipes.
Fixes: QTBUG-92082
Change-Id: I2057ec8cbdb0a1ea198d7eeacb45f65bfa862d8a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring a Qt module with qt-configure-module, we want to use
the same CMake generator that was used for building qtbase.
That generator is encoded in qt-cmake-private. But qt-configure-module
overrides the generator after trying to detect what generator should be
used. That auto-detection is only useful for qtbase-builds and top-level
builds. Turn it off for repo builds other than qtbase.
Pick-to: 6.1
Fixes: QTBUG-91405
Change-Id: I07efb4afb51ba69d2f5467d272118fa51637ab54
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The 'list(TRANSFORM cmake_args REPLACE "\\[\\[;\\]\\]" "\\\\;")' call
breaks the list arguments added when evaluating the 'INPUT_' values.
Therefore, it's necessary to apply bracket-based escaping to all list
arguments instead of the standard escaping.
Amends 856fadf85c
Fixes: QTBUG-92459
Change-Id: Ifd4e0ca5f549a1c7fab9ceb587ed355250c4e677
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt3d/9a473a3c9b246f4895ae73d7060745b8b199a6c5 introduced a find_package
call in a configure.cmake file, very subtly breaking top-level builds
with configure.
The find_package call results in errors of the cmake call that runs
QtProcessConfigureArgs.cmake (see bug report for details).
Create a find_package stub that errors out with a helpful message.
Task-number: QTBUG-92163
Change-Id: I06db0bf219b965e93b78c690e9f7ad868196ddb9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
list(TRANSFORM ...) unexpectedly removes semicolon escaping in list
items. So the list arguments seems to be broken. The 'bracket argument'
suppresses this behavior. Right before forwarding command line
arguments to the cmake call, 'bracket arguments'are replaced by escaped
semicolons back.
Recent fix escapes all semicolons of the 'configure_args' and glues
all arguments to a single 'list'.
Amends df8e1c8e58
Change-Id: I4a458b9e3add307b36924c4c7c7f739d348f9343
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Passing e.g. -- -DQT_BUILD_SUBMODULES="qtbase;qtdeclarative" to
configure would fail because the module list was not preserved
as a single argument.
Change-Id: If685d0d541201597a2c2a5dc3d55b5d1ae51da22
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The change "Enable X11 on other platforms than just Linux"
uses qt_set01 in a configure.cmake file but does not add it
to the stubs list in QtProcessConfigureArgs.cmake thus
breaking builds based on configure.
Add a defstub with qt_set01 to fix this.
Change-Id: Ia3e0ec61df5228f88f77f631968f6f96d567ec8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Qt is built with CMake since 6.0 and the QMake build system was removed
in 6.1. It's time to remove the -cmake and -qmake configure arguments
for Qt 6.2.
Fixes: QTBUG-88286
Change-Id: Ie726ec364ded025f8d93bd69b469561a6ae40aa9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
configure.cmake files are read twice when using the configure script /
qt-configure-module: First, when configure is running and a second time,
when CMake creates the local build system files.
In the first run, not every function and esp. no targets are
available. Code in configure.cmake that accesses targets or calls
functions unknown to configure will fail at the configure stage.
This patch introduces the QT_CONFIGURE_RUNNING variable that can be used
in configure.cmake files to guard such code:
if(QT_CONFIGURE_RUNNING)
set(_qt_coord_type double)
else()
get_property(_qt_coord_type TARGET Qt6::Core
PROPERTY INTERFACE_QT_COORD_TYPE)
endif()
Change-Id: Iff39924d6a5133379d28c8204d7b7afdf47de5c8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Initial replacement of boolean INPUT_ variables to the FEATURE_
variables was wrongly changed to updating of the INPUT_ variable
value to ON/OFF value. This causes potential issues when INPUT_
variable has explicit check for 'yes' or 'no'.
The feature evaluation step enables FEATURE_ variables in case if
the corresponding INPUT_ variable contains a positive CMake value.
So there is no need to process boolean INPUTs at the argument
processing step.
Also no need to keep the special opengl case, since it will be
processed correctly.
Fixes: QTBUG-91158
Pick-to: 6.0
Pick-to: 6.1
Change-Id: I96bb7903a904ae3cf788d7ef7d4e0c019046eb95
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We must not guess the compiler from the -platform argument if one of the
following holds:
- the CXX/CC environment variables are set
- the CMAKE_CXX_COMPILER/CMAKE_C_COMPILER variables are passed
Pick-to: 6.1
Fixes: QTBUG-90914
Change-Id: Iff7a0e7b8857f77333f1705f118d7952af5234ba
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This is supposed to be mapped to INSTALL_TRANSLATIONSDIR, not
INSTALL_TRANSLATIONDIR (without the s).
Pick-to: 6.0 6.1
Fixes: QTBUG-90946
Change-Id: Icec93ffc0dc80d9ac7cf6cf1b13824bc2a1e795f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Add explicit error, if multi-config build is requested, but selected
generator doesn't support it.
Fixes: QTBUG-88287
Pick-to: 6.0
Change-Id: I6dba589bb59ad69fa07221c657df272ec75c359b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add custom targets with '_benchmark' suffixes to make run of
benchmarks using generators possible, e.g.:
$ ninja tst_bench_qudpsocket_benchmark
Extend '-[no]make' option to pass benchmark. Rework
'-[no]make' processing to unify these options processing.
Also looks like it doesn't make sense to enable benchmarks without
having test enabled. So '-DQT_BUILD_BENCHMARKS' enables test as own
dependency automatically.
Task-number: QTBUG-89076
Pick-to: 6.0
Change-Id: Ieee9eadaf6d75a1efec120242d6eb786ace1b071
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For consistency, apply the following renamings:
QT_NO_MAKE_EXAMPLES -> QT_BUILD_EXAMPLES_BY_DEFAULT
QT_NO_MAKE_TESTS -> QT_BUILD_TESTS_BY_DEFAULT
QT_NO_MAKE_TOOLS -> QT_BUILD_TOOLS_BY_DEFAULT
BUILD_EXAMPLES -> QT_BUILD_EXAMPLES
BUILD_TESTING -> QT_BUILD_TESTS
This should help to better convey the difference between "BUILD" and
"NO_MAKE".
To configure tests, but not to build them by default, pass the
following to CMake:
-DQT_BUILD_TESTS=ON -DQT_BUILD_TESTS_BY_DEFAULT=OFF
Analoguous for examples:
-DQT_BUILD_EXAMPLES=ON -DQT_BUILD_EXAMPLES_BY_DEFAULT=OFF
Tools can be excluded from the default build with:
-DBUILD_TOOLS_BY_DEFAULT=OFF
The variable BUILD_TESTING is still available and initialized with the
value of QT_BUILD_TESTS.
Pick-to: 6.0 6.0.0
Change-Id: Ie5f29dfbdca8bfa8d687981dfe8c19c0397ca080
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
That breaks configuration with CMake version 3.18.x (but not 3.19 for
some reason).
Specifically configure ends up passing -DCMAKE_CXX_COMPILER=clang++
which overrides the compiler set by the CMake Android toolchain file,
and at the very end of CMake's configuration it complains about
You have changed variables that require your cache to be deleted.
Configure will be re-run and you may have to reset some variables.
The following variables have changed:
CMAKE_CXX_COMPILER= clang++
Which suddenly starts another configuration with the modified
compilers, ends up detecting host compilers and libraries and
basically everything breaks apart.
Fix QtProcessConfigureArgs.cmake not to pass the compiler options if
the mkspec contains 'android'.
Who knows, we might need this for other platforms too at some point.
Task-number: QTBUG-88460
Change-Id: Idd57870a7cb1009a4e7802e5b3d5ac735f2dacf6
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Since feature evaluation expects explicit 'no' value for INPUT_opengl
to disable either desktop or es2 opengl support, add special
processing for -no-opengl option into QtProcessConfigureArgs.cmake
Task-number: QTBUG-88142
Change-Id: Ib49123ee3e9f98035f6ec85a182382559f4db478
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All configure arguments should be processed as strings
and not be ignored if they satisfy CMake's FALSE criteria
(see https://cmake.org/cmake/help/latest/command/if.html)
Fixes: QTBUG-88424
Change-Id: I932038ad3c5999bed58957dec51fbf892bd650d7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
