Allows sharing tracepoints between modules so that they can share one
trace group.
Pick-to: 6.5
Change-Id: I8de6da6beef02b34700cc2ecb1fad0e72a00b7e0
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
If Qt was configure with QT_NAMESPACE set, store that in the module
information files under 'built_with.namespace'.
Task-number: QTBUG-111158
Change-Id: I273309cb263c64f801dbb7238440336d7afa635e
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Maintain one central place - .cmake.conf - for information
about Qt's copyright.
Pick-to: 6.2 6.5
Change-Id: Ibcbce4313eba9660d459061b0ad00307e267b8f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- Removed the NO_UNITY_BUILD argument from commands that disable it by
default.
- Add a warning in case NO_UNITY_BUILD or NO_UNITY_BUILD_SOURCES is
being used where it is already disabled, e.g., qt_internal_add_test
- Exclude all sources of a target from unity build if NO_UNITY_BUILD
is set on the target. This sounds a bit harsh, but I have noticed that
sometimes the same source file can be included somewhere else, and
some unexpected collision may occur.
- qt_examples_build_end excludes all its examples from the unity build.
- qt_build_test now sets the CMAKE_UNITY_BUILD to OFF before configuring
the tests, and restore its value when done.
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: Ia42e7dd5a5bfb151db241deb639325720fd91eec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake does it for non-project-based try_compile calls if the
CMP0056 policy is set to NEW. That was introduced in CMake 3.2,
thus set it unconditionally.
The use case is to pick up custom -rpath-link paths when
cross-compiling.
Pick-to: 6.4 6.5
Change-Id: I726b90267dd46de116052b5b7f19b9354a568200
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This should be handled later ideally, for now we should skip and
QML tests targets are still being produced, which leads to errors
on WASM.
Task-number: QTBUG-109786
Change-Id: I3d0d1f3115e324c7a0cb036e972226310294b216
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Calling qt_process_qlalr with a skipped/batched target name results
in an error. Do the same as for other helper functions and handle
these two cases.
Task-number: QTBUG-109786
Change-Id: I774b148989a25d01bdf724e69a722aae132389ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Tests generated with qt-cmake-standalone-test will now not be
batched by default. Defining the QT_BATCH_STANDALONE_TESTS
environment variable will make the build system batch them.
Fixes: QTBUG-111226
Change-Id: I9f01c662e22f8ffdd33e1c4d82619db0689fecc7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_internal_add_test_helper will fail if a test batch is missing and
batching is enabled. It will now copy to the parent binary directory
as without batching for simplicity, as this happens when batched tests
are skipped.
One consequence could be that when the first test specified has
the NO_BATCH argument, this will incorrectly install the helper, but
helpers still need extra work to function properly, so for now we just
make it compile.
Task-number: QTBUG-109786
Change-Id: Ib307ae79799422c2a4102885aa007ef043835e50
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The result of dependency lookup is not taken into account when
evaluating tool packages. Check for <ToolPackage>_FOUND before creating
the tool targets that belong to the tool package. Adjust the tool package
lookup that the dependencies always affect the lookup result even if
we avoided creating targets by setting QT_NO_CREATE_TARGETS.
Pick-to: 6.5 6.5.0
Change-Id: Ia95c9c71370becc639ed8a9db026aed2f93959b4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Firebird has it's include files in <include>/firebird so we should also
search there.
Pick-to: 6.5 6.2
Change-Id: Ief57abbfd6973ab9077abc1a1a2791a62ce4102a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is related to QTBUG-110978, but not a complete fix.
Task-number: QTBUG-110978
Change-Id: I91b757addde8213ba3d356a590f6e4cf68187c31
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Manual tests are supposed to display UI and be assessed manually, but
currently they use the auto test runner by mistake.
Use the normal wasm shell to fix this and make them work like usual
applications.
Fixes: QTBUG-111753
Change-Id: I9d3c0ad56e913b73737c5b72087e82980989d8b8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Supressing the linking warnings on macOS are relevant when we are
using AppleClang and not upstream Clang.
The provided arguments do not apply to llvm-ar and llvm-ranlib.
Change-Id: I8b664c01802b47077eb0ab80dab7681ee0bfcaa9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When doing a top-level build with ExternalProject examples, it doesn't
make sense to make qtbase examples depend on e.g. qtdeclarative
plugins. Instead the qtbase example should only depend on plugins
built in qtbase.
Create per-repo custom targets that depend on all plugins built within
that particular repo.
Create an additional per-repo target which depends on all
plugins built in that repo, as well as plugins from dependent repos.
Use the latter as a dependency for examples built as part of the
current repo.
Repo dependencies are parsed from dependencies.yaml.
Pick-to: 6.5
Fixes: QTBUG-110913
Change-Id: I149860cc549caf53271c9ea296eb7bac2a663715
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Recent Emscripten 3.1.27 reduces the stack size to 64KB,
which is way to small for Qt-based applications.
Restore the previous stack size (5 MB) by setting STACK_SIZE.
Change-Id: I6c25e31b32dc1d551fa423655fcef4891830bcd1
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
They now share their implementation. Manual tests can be created by
passing the MANUAL arguments to the qt_internal_add_test as well.
Pick-to: 6.5
Fixes: QTBUG-111382
Change-Id: I1c207b7e4a67526554df1ee43fe032bb20fc92fa
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Matthias Rauter <matthias.rauter@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The previous attempt failed as target coin configuration doesn't
use superbuild. Skip the tests based on the TESTED_MODULE_COIN
environment variable
Task-number: QTBUG-109786
Change-Id: I0dbe6ff64ca4a2e81fef377865ef4e99b58c5eb2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We set CMAKE_POSITION_INDEPENDENT_CODE to ON and require CMake 3.16.
This sets CMP0083 to NEW and should pass -fPIE to linker calls as well.
However, the PIE-enabling flag is not passed to the linker unless we
call check_pie_supported(). This behavior is documented in CMake's
CMP0083 documentation page.
[ChangeLog][CMake] Qt tools are now built with position independent code
even with Unix toolchains where this is not the default, for example
clang.
Pick-to: 6.5 6.4 6.2
Change-Id: I1d98e0ea7063a76e3fddc94d6555c6eaf14c7885
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Properties specified in EXPORT_PROPERTIES have their values exported
verbatim, without evaluating generator expression they might contain.
This limitation is removed by the introduced functions. They collect
properties that needs to be exported and evaluate generator
expressions inside the properties using file(GENERATE) before
exporting them. The functions generate the ExtraProperties.cmake
file that contains set_property calls with exported properties
and corresponding values.
Change-Id: If32c30a82a62e8bd48bb91f3df21ff2ad8d07243
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit e3ecabad22.
Reason for revert: This breaks the CTest internal switches. So it's better to disable testing directly in submodule.
Change-Id: Ia93dc3bb0a3a34021c8e2d6c3d292e3a4909bef5
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This switch should help switch off some time consuming operations
that make sense only whe configuring Qt project from IDE.
The switch is INTERNAL and depends on environment variables defined
by IDE application when running cmake:
- Qt Creator, detected by QTC_RUN environment variable
- CLion, detected by CLION_IDE environment variable
- Visual Studio Code, detected by VSCODE_CLI environment variable
Pick-to: 6.5
Change-Id: I44086376109a8af8ebb7ecd8bf64dc34f0631527
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QtSql for Mimer SQL sqldriver makes it possible to work with the
Mimer SQL database on different plattforms. There are drivers for
several other databases in QtSql and a driver for Mimer SQL will
benefit many users.
To build the Mimer SQL driver, download Mimer SQL from
https://developer.mimer.com
[ChangeLog][QtSql]
Added a QtSql plugin to work with the Mimer SQL database
Fixes: QTBUG-111219
Change-Id: Id6ba5de4de01189d0516ffbfa89efcb0d013115f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit 545400addd.
Reason for revert: Adding NO_CMAKE_PACKAGE_REGISTRY doesn't resolve the initial issue. So reverting this change as redundant.
Change-Id: I284600d6f0e0f2408a7a8b31827251dad4c73eba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit 854986836a.
This reverts commit 392d9a5419.
Turns out that enabling this option is now breaking the Qt build,
because tools that are called by the Qt build cannot run anymore due to
the lack of rpaths.
Before, QT_DISABLE_RPATH was simply turning off Qt's additional rpaths
but left CMake's rpath defaults intact.
To implement a working -no-rpath switch we must add Linux and macOS code
paths to _qt_internal_generate_tool_command_wrapper and set
LD_LIBRARY_PATH/DYLD_LIBRARY_PATH and friends.
Pick-to: 6.5
Fixes: QTBUG-110816
Change-Id: I021d5e6cd775cbe5b2411d6771ab2545cb04f799
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Allow forwarding the NO_CMAKE_PACKAGE_REGISTRY option to the
find_package call from qt_find_package.
When we look for host tool packages the package dependencies are
recorded in the cmake package registry. This leads to the situation
when the lookup retry will use the package that is already found in
host path instead of looking the right one in target paths.
Adding the 'NO_CMAKE_PACKAGE_REGISTRY' to the qt_find_package calls
suppresses records in cmake package registry and starts a clean search
using target paths.
Task-number: QTBUG-111140
Pick-to: 6.5
Change-Id: I97ce1755b2f8e3413f1b0276fe26568b2f5efe33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This leads to unwanted side issues such as building and running third
party component tests. The option should be enabled explicitly by
user instead.
Fixes: QTBUG-111091
Change-Id: I8942db2bd089ad2a39a70627bfce8314b101ecb8
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Cleanup the generated message regarding the configuration summary. Also
moved the flushing into the helper function.
Pick-to: 6.5
Change-Id: I45728ac5b43613f002b6d5b07b9ad037416c4fff
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Apparently, more and more librt functionality are being moved to glibc
these days, e.g., clock_gettime, clock_getres, clock_settime,
clock_getcpuclockid, clock_nanosleep. As Thiago mentioned, in face,
all librt functions are moving into glibc, but unlike the clock_*
functions that I can see are ported from 2.17+, I cannot find out when
and what functions are already ported. So, here, I added a second test
which tries to explicitly look for shm_* functions, if they are there,
as well as the clock_* function, then we are more confident that we
actually have a useful the libRt in the system.
Also, making the FEATURE_posix_SHM depends on UNIX.
Pick-to: 6.5
Fixes: QTBUG-111049
Change-Id: I08b7f4656ecd9313b552fb05ca7096f5b987b95a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tracepointgen tool needs to know the enumeration/flag names
and values in order to generate metadata for the tracepoints
in order to pass this information when tracing.
Currently the metadata needs to be provided to the tracepointgen by
hand. This implements metadata parsing from header files.
Task-number: QTBUG-110598
Pick-to: 6.5
Change-Id: Ibb2cc6e724fd2defca4e301af2285b0fdbe8e7f7
Reviewed-by: Antti Määttä <antti.maatta@qt.io>
Consider a Qt target created in a subdirectory and a call to
qt6_generate_deploy_app_script(target) in the parent directory.
Once qt6_generate_deploy_script (called by
qt6_generate_deploy_app_script) is run, the target has already been
finalized. However, qt6_generate_deploy_script needs to run before
finalization, because:
- qt6_generate_deploy_script marks the target as to be deployed
- the finalizer generates plugins information only if the target was
marked to be deployed
Fix this in qt6_generate_deploy_script by checking whether the target
was already finalized. In that case, generate the plugin deployment
information right away.
Pick-to: 6.5
Fixes: QTBUG-109741
Change-Id: Idf60f9e21f038c1a33843177d9299230857ee70b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If -unity-build-batch-size is not given, we default to CMake's default
which is 8. In QtSetup.cmake, we explicitly set the default to avoid
having it set to OFF in case it is missing, just to make sure that we
don't get any unintended behavior.
Task-number: QTBUG-109394
Change-Id: I19849e9baa507b64fb23847c740e20a7adc61b8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- The following commands accepts NO_UNITY_BUILD, and
NO_UNITY_BUILD_SOURCES arguments to opt out of the unity build, and
to exclude some source files from unity build, respectively.
- qt_internal_add_executable
- qt_internal_add_module
- qt_internal_add_plugin
- qt_internal_add_tool
- qt_internal_extend_target
- qt_internal_add_common_qt_library_helper
- qt_internal_add_cmake_library
- qt_internal_add_simd_part
- Unity build is disabled by default in these:
- qt_internal_add_test
- qt_internal_add_test_helper
- qt_internal_add_benchmark
- qt_internal_add_3rdparty_library
- qt_update_ignore_pch_source also excludes the files from unity_build
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: I5d0e7df633738310a015142a6c73fbb78b6c3467
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce the qt-cmake-create script. The script generates the simple
CMakeLists.txt based on the source files located in the current or
specified directory. The initial version can generate a CMake code for
the following file types:
- .c .cc .cpp .cxx .h .hh .hxx .hpp - generates the qt_add_executable
call with prerequisites.
- .qml .js .mjs - generates the qt_add_qml_module call with
prerequisites.
- .ui - adds the found ui files to the existing executable. Requires
C++ files be present in the directory too.
- .qrc - generates the qt_add_resources call and adds the resources
to the existing executable. Requires C++ files be present in the
directory too.
- .proto - generates qt_add_protobuf call with prerequisites.
The QtInitProject.cmake script contains the 'handle_type' function that
allows extending the script capabilities and establish simple relation
chains between the file types.
Note: The initial implementation doesn't deal with sub-directories, so
all files from sub-directories will be added to and handled in the
top-level CMakeLists.txt file. This can be extended by user request.
Task-number: QTBUG-104388
Change-Id: I5abd9e07da109e867ff95986572ed2bf02ef9d3d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This somewhat indicates the progress of configuring a specific
repo and the slower period of time when configuring examples
in-tree.
Pick-to: 6.5
Change-Id: I643536c4ebc865933730b7af2a1d0c56bbbf2912
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This reverts commit d7e8d5bb1b.
Reason for revert: Found a working solution for the issue.
Change-Id: Ia720cc63ece9dfb1a24067cdd9c3d79d4edbe3be
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
- If no version specified, policy version is set to 6.0.0, therefore
warnings will be shown, encouraging users to set a policy.
- Update qt_policy() documentation
- Update qt_standard_project_setup() documentation
- Update the policy warning message
- Added the missing comment to clarify the extra_code region
Pick-to: 6.5
Task-number: QTBUG-96233
Change-Id: I8358fdeb880a34c96f13fc2a6cbef6afe048c4d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
To extract system proxies, the one we used previously, was not available
on iOS and thus we could not obtain system proxies there. Support is
limited - no such things, as SOCKS/FTP/etc. proxies, only PAC (auto
configuration), and HTTP/HTTPS. There are no keys to extract info
about HTTPS, so instead we'll use CFNetworkCopyProxiesForURL (
looks like this enables exclusion lists (which are hidden)
functionality and apparently from the system point of view HTTP/HTTPS
are the same.
Fixes: QTBUG-39869
Change-Id: I73af719a2e2b5cded706e6b3faa4b8eaa879352b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Right now, "multi abi builds" of android projects works only if the
android-build installation doesn't use custom install dirs
(INSTALL_PREFIX, INSTALL_BINDIR...)
At the same time, it fixes QTBUG-106533. The patches are the same as the
ones in that bugreport.
Add new items to android-*-deployment-settings.json:
qtDataDirectory
qtLibsDirectory
qtLibExecsDirectory
qtPluginsDirectory
qtQmlDirectory
Update androiddeployqt to be able to get files from their install location
BTW (fixes QTBUG-106533):
Install src/android/templates into INSTALL_DATADIR
Install src/3rdparty/gradle into INSTALL_DATADIR
Install src/android/java files into INSTALL_DATADIR
Install all jars into INSTALL_DATADIR
Add missing path to target_qt.conf
Update target_qt.conf to have all path. Otherwise qmake wouldn't have
the path when installing the android-build with custom install dirs
like INSTALL_LIBDIR & friends
Add support for a new cmake variable that can be set at build time of the
android projects: QT_ANDROID_PATH_CMAKE_DIR_${abi} (Name chosen as
brother of QT_HOST_PATH_CMAKE_DIR)
Pick-to: 6.5
Fixes: QTBUG-106533
Fixes: QTBUG-107207
Change-Id: Ia3751362ab1b5f877ecafbe02f263feac167119c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
KDE Frameworks tests this in one build configuration. Verify that we
do not break it in public Qt headers.
Task-number: QTBUG-110585
Change-Id: I5c976d00d7b1aba026e99acb9bad176103e23b0b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
We must not set rpath-related properties on INTERFACE libraries. Move
the code that sets the properties below the bail out for INTERFACE
libraries.
This amends commit 392d9a5419.
Pick-to: 6.5
Fixes: QTBUG-110513
Change-Id: Ie395f1482245c4522917f982d2f3bc745c0b2abc
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The extra quote enforces the arguments to be string, and stops the
COMMAND_EXPAND_LISTS within
QtDbusHelpers.cmake::qt_create_qdbusxml2cpp_command from expanding it
as a list.
Fixes: QTBUG-110459
Fixes: QTBUG-110450
Task-number: QTBUG-99238
Change-Id: Ifddd6570c7bf8f2d1757f275d9445ce2924a93f1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The batcher does not currently work properly with non-qtbase
submodules. Disable them temporarily so that at least the
tests in qtbase are batched. Do this from qtbase so that changes
to each and every submodule are not necessary.
Also, maintain a list of tests that were thus skipped. On any
qt cmake internal function call that refers to such a target,
identify the target as skipped and make the call a no-op.
Fixes: QTBUG-109785
Change-Id: Ib0aa5d39eee8315ffd4ac62f6d1f44fe9bbf7a2f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
AUTOUIC doesn't handle relative paths to .ui files in parent
directories when using Ninja Multi-Config.
The designer tool in qttools has such a ui file. This leads to the
following error when trying to build qttools together with examples as
ExternalProjects and Ninja Multi-Config:
ninja: error: 'src/designer/src/designer/designer_autogen/
include_Debug/ui_preferencesdialog.h', needed by
'src/designer/src/designer/designer_autogen:Debug',
missing and no known rule to make it
Until cmake is fixed, we can work around the issue by not adding
designer as a dependency when building EP examples, because no example
tries to use the app.
We can't exclude all apps from example dependencies because some
modules use qt_internal_add_app for tools as well, which are called
from public CMake API and also examples.
An example of this is qtapplicationmanager.
Given that we can't exclude all apps, introduce a function to
allow skipping single targets when building EP examples.
This will allow excluding designer specifically.
The examples will now depend on a new ${repo}_src_for_examples target
rather than ${repo}_src, which will exclude skipped targets.
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Task-number: QTBUG-110369
Change-Id: I2f900253bbf7bac917f2293ef604ab3ea8f298e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
