this makes it consistent with the determination of the default
include/library paths. this makes sense, as it's possible to switch the
sdk/toolchain after building qt (within reason).
a side effect of this change is that for compilers which emulate other
compilers, both the real and the emulated version are now made
available.
Change-Id: Icfcc672c0d2e3d1b5e622993c366063d70ad327c
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is needed in order to be able to specify a custom location of
the ANGLE libs, and enables us to perform a LoadLibrary of ANGLE libs
by just having the absolute path to QtANGLE.dll as the argument to
LoadLibrary().
Previously, we had two ANGLE libraries: libEGL and libGLESv2. libEGL hard
linked against libGLESv2. If we wanted to load libEGL from a custom
location, we couldn't load libEGL by calling LoadLibrary with the absolute
path to libEGL, because libEGL had problems finding libGLESv2. One
solution to that could have been to call SetDllDirectory() with the path
to the ANGLE libs before calling LoadLibrary("libEGL.dll"). Since the DLL
directory would point to both ANGLE libs, this would ensure that the libGLESv2
was also found. Unfortunately, this approach is not thread safe
(SetDllDirectory will affect all subsequent LoadLibrary(Ex) from the same
process). Therefore, we chose to merge the two libraries into one to
circumvent the whole problem.
At the same time, this patch also enables loading of two different ANGLE
libraries into the same process at once without renaming them: This was
not possible before because libEGL hard linked to libGLESv2.dll. When
libGLESv2.dll was already loaded, the second instance of libEGL would
simply link against the already loaded version of libGLESv2.dll.
This behavior is documented in the LoadLibraryEx documentation on MSDN:
"If the string specifies a module name without a path and more than one
loaded module has the same base name and extension, the function returns a
handle to the module that was loaded first."
Change-Id: Ic1d886ba802be72ddcf01235bafaedcef662762e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
This scheme is needed to define Bluetooth (LE) capabilities on Windows
Phone 8.1. Setting these capabilities is a bit more involved than what
we currently support from qmake (see
https://msdn.microsoft.com/library/windows/apps/dn263090.aspx) but this
way we at least prepare the template for these steps.
On Windows 10 the bluetooth capabilities are set automatically similar
to the way it happens for other modules.
Change-Id: Ib3aa88802c3b421c9c3d02ec4db647cde2191f16
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Split them and add -I flags to INCLUDEPATH and -D flags to
DEFINES. Anything else gets reported as a problem and dropped.
This has the benefit that qmake will automatically use -isystem for
those paths if they lie in a system directory. As a consequence of that,
we won't get any warnings in headers located there. There are multiple
cases of glib, gtk, etc. headers producing warnings (such as enums
ending in comma). This does not fix warnings produced by use of macros
declared in system headers, though...
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I4b844cb518dbae5ea499811221f9015af985110a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is now centralized in configure.pri except where it explicitly
needs to be overridden.
Change-Id: If829d6b5eecf9a5fc403d0a0600d12c9e5781525
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There's no reason for this to be separated, regardless of the
support status of i386 macOS builds. Additional architectures may
appear in the future (and currently there's actually 3 - i386,
x86_64, and x86_64h for Haswell CPUs). So this feature could be
used to get combined generic x86_64 and Haswell builds. Some
system libraries appear to have an x86_64h slice in Sierra.
[ChangeLog][Build System] Support for universal binaries on macOS
has been re-introduced.
Change-Id: I1c89904addf024431fdb3ad03ea8ab85da7240ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This essentially emulates Xcode behavior for QMAKE_BUNDLE_DATA.
This is mostly for our own internal use. No documentation is provided.
Variables introduced:
- QMAKE_ASSET_CATALOGS
- QMAKE_ASSET_CATALOGS_APP_ICON
- QMAKE_ASSET_CATALOGS_BUILD_PATH
- QMAKE_ASSET_CATALOGS_INSTALL_PATH
Change-Id: I9577415d637f022d05f301c5a0d799483cd2a963
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the code got factored out to an own toolchain.prf file, which is
load()ed from default_pre.prf, so no change at first.
however, on mac, we shadow toolchain.prf, and make it load() sdk.prf
first.
a side effect of this is that project files may not override
QMAKE_MAC_SDK any more, which seems to be no big loss. it is still
possible to override the sdk on the configure command line (but note
that this only ever worked for the target sdk).
it has also become harder to disable the use of an sdk altogether:
putting CONFIG-=sdk into a project file or the qmake command line has no
effect now. instead, it's possible to put it into .qmake.{conf,cache}.
to make it simpler again, it's conceivable to finally add qmake -pre,
which would allow setting variables before default_pre.prf is executed.
Change-Id: I149e0540c00745fe8119fffd146283bb214f22ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Actually enables headerpad_max_install_names in the darwin-g++ mkspec
as previously it was (presumably accidentally) cleared.
Change-Id: I4b2e5a0dcf38658cfe35bc0e5f24769c80f4d877
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Now QMAKE_RPATHDIR also includes @executable_path and @loader_path
on Apple platforms, and omits any others on iOS, tvOS, and watchOS
since they can't use paths outside the application bundle.
Change-Id: Ia8f76ebcddd51f44eca482a51ce1710369c8df10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
All of these flags were blindly copied from Xcode and all of them are
not needed because they are unnecessary or at the very least are for no
reason specific to iOS/tvOS/watchOS.
* -fvisibility=hidden,
-fvisibility-inlines-hidden - handled in common/gcc-base.conf
* -fpascal-strings - a Mac OS Classic legacy, no one uses these
* -fmessage-length=0 - formatting option, not needed
* -fexceptions, -fasm-blocks - these are on by default and not needed
All explicitly enabled warnings are enabled by -Wall, which is handled
in common/gcc-base.conf. All explicitly disabled warnings should not be
disabled because we simply do not do this anywhere else in qmake.
Change-Id: Ifb9b2ff100837c7cf5888493a6413c972609598d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Previously we hardcoded the minimum windows version to the initial
Windows 10 release. However features have been added which require a
higher SDK version (eg drag and drop). Deploying such a package might
fail during distribution to consumer devices.
Hence introduce WINRT_MANIFEST.minVersion and
WINRT_MANIFEST.maxVersionTested as variables for the manifest file. If
nothing is specified, both values will be set to the UCRTVersion
environment variable, implying the development setup from which qmake
has been invoked.
Change-Id: I1dcf1e75c67c4ab2fd5a3fdcc32c8783a336e6ff
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These actually affect all UIKit platforms (tvOS, watchOS), not just iOS.
Change-Id: I2b45ebecb10d11e33d301071093b5342ce101816
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's optional but default in Xcode, and will probably become required
Change-Id: I6917a9cf15b48dbaee57f1a92ea47d68fb3c253a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
this switches all instances of LIBS[_PRIVATE] += -lfoo where a config
tests exists for foo.
this removes some code duplication between tests and project files (in
case of conditionals), and ensures that the projects always actually use
the libraries configure has found.
Change-Id: Ia7e80c8db5f329290c7f1a4e03a8bf78882a687e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
llvm-ar is not shipped as part of Xcode. Use libtool instead, just like
Xcode does.
Change-Id: Ic9c5e16c826c0d42979556f78d2cf6415542ef93
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This warning has been introduced by VS2015 Update 3 and is not in our
control as the warning happens inside the system headers. To keep the
compile output clean, disable this warning.
Change-Id: I96253538c6d6774bb91cd5a4ea80dda2910e74b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
This was missed in ab599a3931 when
QMAKE_STRIP was set as a side effect of adding support for separate
debug info.
Task-number: QTBUG-54212
Change-Id: I86dd040dbefec4c58879c7d029ed89dd8bad3daf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add x86-64 and aarch64le QNX platforms. These platforms will be
available in QNX 7.0.
Change-Id: Iba1f635ba45fddf1a1caf907415a23a510ba0818
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
As common bsd's are using the -ffunction-sections flags from
mkspecs/common/gcc-base.conf, also use the --gc-sections ld flags
like Linux as all are using GNU ld as their linker and all are
capable of using it. The last remaining problems with --gc-sections
removing the .name sections providing the OS tags for distinction of
the execution layer were solved with NetBSD 6.0 and OpenBSD 5.4, see
http://gnats.netbsd.org/40401 and http://www.openbsd.org/plus54.html
so this option can safely be used now to reduce the size of moc and rcc
tools.
Change-Id: I74ccd4f6bc607f6d82d32fc864875f26b26bf167
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Adapt to the OS X => macOS rename in Q_OS_ macros/docs, qmake scopes,
file selectors, etc.
- Add new QSysInfo values and MAC_OS_X / __MAC_ / __IPHONE_ values for
macOS 10.12 and iOS 9.1 through 10.0.
- Update prettyProductName with new macOS "Sierra" codename.
Change-Id: Id976530beeafa01b648ebaa16f4a8f0613fcaf75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the strip commands for installation commonly used also on BSD
systems.
Change-Id: I4113ffa559a737ef92afb7c90ab5e1bff902b1bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
BSD OS mkspecs share mainly the same configurations except very few
differences. Merge into a common/bsd/bsd.conf file to be used across all BSD
OSes in their respective qmake.conf and add a qplatformdefs.h that contain
the common defines to be re-used in the BSD mkspecs.
The change includes the usage of <sys/param.h> also on NetBSD through the
common qplatformdefs.h, which is intended for using NetBSD's version defines.
Change-Id: Ibb0ac9e4c8bb5aff7d0febdcab1a4b9600a61117
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
- moved prf files to shared location (uikit, added to QMAKE_PLATFORM)
- prepare some formatting (unconditional blocks mostly) to add conditions later
- make device detection script more generic, passing filter strings
as a parameter and returning non-os specific variables
Change-Id: I61f2b77093304ff985bec9da04fda57ff296b16b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Use non-os specific target names in Makefiles (device as opposed to
iphoneos, simulator as opposed to iphonesimulator)
Change-Id: Ic8441c09a0e9a254e43f31b678025f16e9a1c440
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This makes the -separate-debug-info configure optional functional, which
generates dSYM debug info bundles for Qt libraries on Apple platforms.
Task-number: QTBUG-37952
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So far no capabilities (but internetClient for Windows 10) were added by
default, which forced developers to always manually edit the
WINRT_MANIFEST.capabilities(_device) property.
This allowed to leave out non-required capabilities and keep the created
manifest clean, examples being microphone for multimedia.
However, this also breaks first user experience as deeper knowledge
about this topic is required. Furthermore this is inconsistent with
other platforms like Android, where all capabilities are set by default
and developers need to edit the manifest manually in any case.
With this change, modules can define the capability set to enable all
features in the module. If developers want to disable some again, they
need to adapt the generated manifest. From our experience this needs to
be done in any case, latest at publishing stage when the store
manipulates the manifest.
Task-number: QTBUG-38802
Change-Id: I6d522268ee0afbfa00a30dbdd5e6ec9f415bebf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The platform header defines geteuid(), which is necessary for the SQLite
library. The common platform header is also modified to handle being
included from C, and resolves a typo on the way.
Change-Id: I8ace8a11ceac0f541b9c9b0d8112609579224884
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Targets (xplatform) include integrity-armv7 and integrity-x86.
[ChangeLog][Platform Specific Changes] Added support for INTEGRITY RTOS.
Change-Id: If7827791e0a977ff198cb99e9dcc684a010bbb81
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This header defines "interface" which will break compilation of dbus.
Change-Id: I16fa35f822adca14304aa827b047358409d4a150
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Preparation for Apple tvOS support, which shares a lot with the iOS
platform.
Change-Id: I543d936b9973a60139889da2a3d4948914e9c2b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
10240 describes the first official non-preview Windows 10 SDK. 10586 was
the SDK for the first November update.
Change-Id: Ieb61b944295946eab594b3c7bf234155a67b752e
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This allows users to add mobile specific features. Also it implicitly
enables support for continuum on Windows 10 Mobile.
Change-Id: I965123722f46df6e84fd279c3bfce478c1172632
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
The qt_poll function calls recv to query whether fds marked by select
as readable should be marked POLLIN or POLLHUP in the pollfd structure.
On many platforms such as QNX this requires extra link-time libraries
which were not previously required by QtCore.
While the qt_poll function is intended as a fallback mechanism only for
those platforms which do not implement poll natively, the function was
compiled unconditionally whenever QT_BUILD_INTERNAL was defined, e.g.
in developer builds.
Additionally the function was included on those systems that define poll
in system headers so that configure determines build-time availability,
but do not define _POSIX_POLL > 0 or indicate POSIX:2008 compliance via
either the _POSIX_VERSION or _XOPEN_VERSION macros. On those systems a
sysconf query for _SC_POLL was performed to determine at runtime whether
to call the system poll or qt_poll.
Both of these cases are in fact counterproductive. In the first case the
sole consumer of the function is a single manual unit test. In the
second, to my knowledge no platform requires the runtime fallback.
Despite that, we were forcing an extra dylib in both cases.
Both cases are fixed by 1) moving the implementation into its own file
for the unit test to include and 2) dropping the dynamic fallback if
configure determines availability of poll at compile-time.
This also reverts commit 1377709711, which
added -lsocket for QtCore on QNX.
Change-Id: I2dd10695c5d4cac81b68d2c2558797f3cdabc153
Reviewed-by: James McDonnell <jmcdonnell@qnx.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That implies we need to differentiate between a variable set but empty
and an empty variable. GCC, Clang and the Intel compiler accept -msse2
on 64-bit builds without warning (they also accept -mno-sse2), but the
Microsoft compiler does not have that option.
Change-Id: I54233388ba10994996ae3e749fd829085e8fd7b7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is needed to be able to use Qt (with dynamic ANGLE) in a plugin
while the host runs a different version of Qt (and ANGLE).
In addition to changing the LIBEGL_NAME and LIBGLESV2_NAME variables
you also need to update the value of the LIBRARY definition in the
.def files for ANGLE:
qtbase/src/3rdparty/angle/src/libGLESv2/libGLESv2[d?].def
qtbase/src/3rdparty/angle/src/libGLESv2/libEGL[d?].def
Task-number: QTBUG-48431
Change-Id: Idd00d039ba3e20cc0ec7496bee36ed1c90383b0d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Visual Studio version specific changes have been added to msvc-
desktop.conf which is not used in WinRT or Windows Phone related builds.
Hence take a similar approach to gcc and introduce msvc-base to be used
by all configurations for common settings.
For WinRT this will only be applied to msvc2015 and later on to not
introduce any regressions or behavior changes for previous versions.
Change-Id: Ib1a4d539d46d788470c00cb5969fee74a803bd67
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
While all apps need to have internetClient as a capability, the option
to provide further capabilities via qmake has been removed in the
template.
Instead we add the required items inside the prf and keep the manifest
template as generic as possible.
Task-number: QTBUG-49504
Change-Id: If26b9da277a5269a57b34e74c146b40b1b64d091
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
... and make use of it in qt.prf.
[ChangeLog][qmake][Unix] Added support for relative paths in
QMAKE_RPATHDIR.
Note that this technically breaks backwards compatibility, as relative
paths were previously silently resolved against $$_PRO_FILE_PWD_. This
was not documented and seems rather useless, so i'm not worried.
Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If that section is there but empty, the manifest cannot be loaded using
the App Manifest Designer in Visual Studio.
Task-number: QTBUG-48648
Change-Id: I529eb2f2a690bececcf5c385b8f96e84ece363d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
We no longer support any compilers that don't know the actual version
number of the standard.
Change-Id: Ib056b47dde3341ef9a52ffff13ef154791dd0d22
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
make sure that all specs define QMAKE_{PREFIX,EXTENSION}_{SH,STATIC}LIB,
and adjust the code to make halfways consistent use of these variables,
in particular on windows; Win32MakefileGenerator::getLibTarget() is gone
as a result, as is QMAKE_CYGWIN_SHLIB. still, tons of hardcoded "lib"
references remain in the unix generator, because no-one cares.
Change-Id: I6ccf37cc562f6584221c94fa27b2834412e4e4ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
that way we can override the values defined there.
Change-Id: Ib9bce596d9fd43875b26a97c5489ee9d0d46b77c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it was experimentally added in 2011. there is no evidence that anyone
actually uses it.
Change-Id: Ie3b131f3783cafe942d180b2623fcc64740d7a73
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it must come first, as it is most specific.
an alternative fix would be re-organizing the includes, but that
requires a lot more effort to get right.
Change-Id: I1526a3c966f3dc3f3df1efc00ec271d333ed7ebf
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
If no_generated_target_info is not set, VERSION is set, and
there is no .rc file that belongs to the project, qmake creates a
.rc file that contains information about the target's version
and copyright, for example. This resource handling is also
supported by WinRT and we can add this information to the target.
On Windows Phone, winresrc.h (which is needed for resource
handling) is not available though. When trying to add a .rc file
to a project in Visual Studio, it also complains about winres.h
not being available. Instead of hacking around the issue, we
just should not support this behavior on Windows Phone.
Change-Id: Ie962bfa790916fed23294110062e3572a0e317f9
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This linker script is only enabled for systems with GCC or GCC-like
compilers, though technically it should work on the BSDs too (will
enable after testing). For regular modules, this declares one ELF
version "Qt_5" and places all QtCore symbols inside, then it declares
unused ELF versions "Qt_5.x" for each older minor release. For modules
declared "internal_module", all symbols are placed in version
Qt_5_PRIVATE_API.
The big advantage of an ELF version is that, when we do Qt 6, both
versions of QtCore could be loaded in memory without conflicts and all
symbols would be resolved to the correct library. No module can talk to
both at the same time, but this avoids mistakes of loading them
indirectly by plugins.
The extra Qt_5.x versions will be used in the next commit.
Change-Id: I049a653beeb5454c9539ffff13e3fe6f050fdf31
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Change-Id: Iee8cbc07c4434ce9b560ffff13ca466263abcb1b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
The architecture needs to be specified to be properly used inside Visual
Studio and for winrtrunner to parse dependencies.
Change-Id: I218100f33efcba9f78199cbd1e48089269648e61
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
So far the dependency keyword has been ignored for the new Windows 10
mkspecs. The difference to older manifest files is that there is already
a <Dependency> section and hence we embed dependencies inside this one,
as the format standard does not allow to have multiple of those.
Change-Id: I1bf25979cc28d5c153215de5bb9cd6f37e9c50aa
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Since libstdc++ builds on OS X and QNX 6.5 are no longer supported,
simply require <initializer_list> and std::move in order to claim C++11
support works.
The minimum OS X versions need to be fixed elsewhere.
Change-Id: Ib056b47dde3341ef9a52ffff13ef1d2ac3923f5c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Fix the flood of warnings:
src/corelib/global/qflags.h(52): warning C4577: 'noexcept' used with no exception handling mode specified; termination on exception is not guaranteed. Specify /EHsc
now occurring since we don't have exception handling enabled.
Change-Id: I05d12ee6303b4f9fceb48507fadfd7d1a5604ea4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
These macros are not defined unless a desktop or standalone SDK is
installed.
Change-Id: I4c600ddca5944cc5fde310e4fbe0866a7250d36b
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Most people's yacc are actually a symlink to bison. On Windows, where
symlinks don't usually exist, we can use bison -y.
This was tested with MSYS Bison.
Change-Id: I913745d48af30f9ef7b846b6438500261dd6022d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Prefer -std=gnu++11 unless strict_c++11 is defined. You can enable
strict C++11/C++14 mode by using
CONFIG += strict_c++
That is enabled for Qt's own code, so we we don't accidentally use GNU
extensions in portable code.
There's no support for strict C++98 mode (that is, the -ansi option).
[ChangeLog][qmake] By default, GNU extensions are now enabled with
Clang, GCC and ICC even in C++11 and C++14 modes. To disable the GNU
extensions, add to your .pro file: CONFIG += strict_c++.
Change-Id: Ib056b47dde3341ef9a52ffff13ef14de2169bef5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Clang does not recognize the compiler flag 'no-arc-abi' anymore.
This causes a warning, which will fail the build. Not sure
what the flag does, as I cannot find any documentation for it, even
after grep-ing through the sources (both clang-600.0.57 and
clang-503.0.38)
Change-Id: I39fae3fd108a8edb978f4264935a069cce4c302a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This allows creation of applications for
- x86
- x64
- arm
While the arm build theoretically also allows to launch on
a mobile, it currently asserts on runtime. Either we will
create a new mkspec for Windows 10 Mobile in the future,
or do runtime checks for the environment. That also depends
on whether there will be a separate SDK by Microsoft.
Change-Id: I510bfc88410a5b5a1eb7c37f7f43888d1e5dda0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
On desktop windows we define _HAS_EXCEPTIONS=0 to also forward this
option. Hence harmonize this with WinRT builds as well.
As a side-effect qtdeclarative now compiles without warnings on WinRT.
Change-Id: I8e343f172160991ffb2ede01303802f321de82b5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
GCC 5 combined with a recent binutils have a new optimization that
allows them to generate copy relocations even in -fPIE code. Clang has
the same functionality when compiling an executable with -flto. We need
to let the compilers know that they cannot use copy relocations, so they
need to use really position-independent code.
Position independent code throughout is not really required. We just
need the compilers to use position-independent access to symbols coming
from the Qt libraries, but there's currently no other way of doing that.
Task-number: QTBUG-45755
Change-Id: I0d4913955e3745b69672ffff13db5df7377398c5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this allows LD_LIBRARY_PATH to take precedence over the hard-coded
rpath, which is the only sane thing to do (which is also why i'm not
adding an option to disable it).
this behavior is consistent with non-linux systems.
the windows version has no auto-detection, just like for gold linker
usage.
Task-number: QTBUG-3069
Change-Id: Ief9ba032291c898d75d76ecc740390954382a804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The flags are the same across all GCC flavors so put the definition
in the common gcc-base.conf instead of duplicating it in g++-base.conf
and clang.conf
Change-Id: I1ba2c3c314d3a02b559c384aecef74240f69f659
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The variables used for release with debuginfo was set in g++-base.conf
which is not included by clang builds.
Change-Id: Iec3b23c371c113ff934d2c7f5134ef78b1cf939e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This issue had been fixed by SHA: a12a2fdf68
but re-introduced by SHA: c23d1c7695 again.
Task-number: QTBUG-45085
Change-Id: If98ee108335d80035179a83b1b28f384395d8373
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Neon detection in configure does not work unless correct
flags are passed to compiler.
Task-number: QTBUG-44690
Change-Id: If119cc9ed80275aaa8796c1be8853559a7670d6a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Moc doesn't have the built in defines that clang has, so we need to
hard-code some of these so that moc resolves the Q_OS_IOS define
in the end, based on qsystemdetection.h and TargetConditionals.h
Change-Id: Id9a7f870b940f99f27c55a2a887d0ce93217b821
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Due to common subexpression elimination instruction set extensions may
leak from the objects where they were enabled when doing link-time
optimizations.
To avoid that this patch disables LTCG/LTO on files built with extra
instruction set extensions.
Change-Id: Ie34ad900be7fb04a0dc4d3562187ee170c183333
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We've been setting the -Zm argument since the dawn of times (even before
the first git commit). Anyhow, MSDN from VS2008 onwards indicates
that this is not needed:
"In earlier versions of Visual C++, the compiler used several discrete
heaps, and each had a finite limit. Currently, the compiler dynamically
grows the heaps as necessary up to a total heap size limit, and requires a
fixed-size buffer only to construct precompiled headers. Consequently, the
/Zm compiler option is rarely necessary."
[ChangeLog][Compiler Specific Changes] Visual Studio: -Zm200 (an option to
specify the precompiled header memory allocation limit) is not added anymore
by qmake to the compiler calls. If you encounter an C1076 compiler error you
might need to re-add it in your .pro file.
Change-Id: Ia4bec7eba09d893a7d81886a1814602b9ce7563c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QtWebEngine and QtWebKit uses the Qt config to detect if C++11
is enabled. Since it is always enabled on MSVC, we can safely
set the flag indicating it is a C++11 build when using a newer
MSVC version.
Change-Id: I2efb8d1a9b1cf1496481569403c00358d0cae365
Reviewed-by: Michael Brüning <michael.bruning@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Move compiler warning 4996 from level 3 to 4, like we did already for
desktop builds: 0a76b6bc7f .
Change-Id: Ic4bbaeb3104352a915b15eec7a9c9dda9a5cceec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Naming for different logo sizes on WinRT has been varying in the
past and evolved from using small/medium/large to some being
explicit (71x71).
Add new values introduced by 8.1 (310x150, 310x310,...) and clean up
mixed usage. Detailed pixel versions overrule general specification
and latter ones stay mostly for compatibility reasons. Still the
preferred way is to use explicit pixel values.
Task-number: QTBUG-43644
Change-Id: I9173ec2951a82e5eac9d8c9956bfb0bb4d1a2459
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
By using the special "ar" and "ranlib" tools, the symbol table is made
visible, so we don't need fat LTO binaries. Since we need to store the
new tool names, we may as well clean up ltcg.prf with variable names for
the fat mode too.
Change-Id: I7e53af0c74a3d069313f38500b72538af1d61128
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move compiler warning 4996 from level 3 to 4. This is needed to avoid
warnings about the use of C++ standard library functions like std::copy,
which is used e.g. in qvector.h (since c6752c5aa1):
'std::copy': Function call with parameters that may be unsafe -
this call relies on the caller to check that the passed values are
correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS. See
documentation on how to use Visual C++ 'Checked Iterators'
Because the warning has to be disabled before any standard C++ header
is included one cannot just fix this locally in qvector.h.
Change-Id: I929f1535656bca9f5beb7fd0d557178370c232c6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
With the -load_all option turned on then it will cause a problem with
the network bearer plugins as they share the same files and on OS X
two plugins will be built and potentially linked against when building
statically.
This only effects gcc builds because clang does not turn this option on
when linking by default either.
Task-number: QTBUG-39238
Change-Id: Ib259304c3da74b6b4f6fcc6e3766427303af3bbe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
These mkspecs are not supported and no longer compile. Related support in
qmake has also been removed.
Change-Id: I7706dcfa5471e55e2ae3d580d65e9371e2c652d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Tested with the Preview release of November 2014.
Differences to the 2013 detection and support:
- Option -Zc:strictStrings is present in both debug and release mode
and is passed to qmake's own build
- New warnings 4456, 4457 and 4458 (shadowing) are disabled
- Compiler supports -arch:AVX2
Change-Id: I9572ff4d4aded4004c1fa5d6f13ffee5462043d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Most files are exactly the same, so it's silly to duplicate this all
over. The differences could have been kept in each of the qmake.conf
files, but I preferred to centralize because they apply to each newer
version and, soon enough, version-specific configuration would grow
again.
Change-Id: I5c5ed58055c954acf4851d87c70cc5af49c98738
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Due to the way that the QCC mkspecs are structured, the recent
change to add full optimization support causes the -O2 flag to
be completely dropped from QCC builds in release-with-debuginfo
mode, since the QMAKE_CFLAGS_OPTIMIZE variable is not declared
in any configuration file included by QCC toolchains. This patch
adds the necessary flags to make the QCC toolchain operate correctly.
Change-Id: I4cd93442d59fae7c92fc5219cddb16f367447203
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Add WINRT_MANIFEST.rotation_preference as description which orientation
is allowed or preferred by the app. Valid values for Windows Phone are
portrait, landscape, landscapeFlipped. WinRT also allows portraitFlipped
Task-number: QTBUG-40830
Change-Id: I6b11afcdb72c2c158dadddafc5d90c1d18ab9d8b
Reviewed-by: Andrew Knight <andrew.knight@theqtcompany.com>
While it does not look like the clang-based mkspecs had any problems so
far with not having QMAKE_LINK_C and QMAKE_LINK_C_SHLIB defined, it
makes sense to set them to $$QMAKE_CC just like the GCC-based ones so
CONFIG=use_c_linker works as expected.
Change-Id: Ib660d12b001dd7a877b6f03e79715db08a272968
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
GCC and Clang support compiler intrinsic error detections tools:
address, memory, thread, undefined
Let users conveniently enable it in qmake, for instance with
CONFIG += sanitizer sanitize_address
Also add a -sanitize [...] option to configure to use it by default
for both the Qt libraries, and user applications.
[ChangeLog][configure] Added support for GCC/Clang -fsanitize= options
Change-Id: Ie5418abcdf41842566df510d7707e41739e66f87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is done by defining QMAKE_LFLAGS_RPATH for compilers for Apple platform.
Task-number: QTBUG-31814
Change-Id: I9040df341ad46395d6ab71bc760ba7a5ee5ff291
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
This code hasn't been tested for at least 4 years. It's not maintained
and probably doesn't work.
Change-Id: I4b9a5179e34111b400914f91caa6b741b69771bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds the feature use_gold_linker to use the gold linker that
has been part of of GNU binutils since 2008. Gold links C++ libraries
much faster and use less memory.
The feature is autodetected when building Qt on Linux, but can be disabled
in configure. On MingW builds it is default off but can be enabled for
cross builds.
Change-Id: Icdd6ba2e706b2c791bcf44b6e718c2b7a5eb2218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC currently requires fat object files for static libraries, since the
linker would otherwise not load the .o file from the archive at all and
the linking would fail with a lot of undefined references. Clang on
Linux also needs this, but it has no equivalent flag, so enabling LTCG
for Clang on static libraries will result in linker error.
This commit does not add support for enabling it in configure. It can be
enabled on a per-project basis by doing CONFIG += ltcg or by passing
-config ltcg to qmake's command-line.
Change-Id: I52cf99f1ed9f1701e23a3b457ba3502fd28126ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If the prefix isn't "m2" for the 2013 namespace, Visual Studio Update 2
won't open the document in the designer view. Even though there is
nothing technically wrong with the way it's currently done, change it to
"m2" to keep VS happy.
Change-Id: I62721114610de5396eb507828b39db89c1e96b1a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Tweak qmake, add mkspecs for emulator and device, adjust the
manifest template for WP8.1, and add missing icons.
Change-Id: I7a6405fa85297ae4cc8522015274e65fb7a315a6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This matches the -ffunction-sections from bootstrap.pro, which tells the
compiler to create a section for each function. The -gc-sections option
tells the linker to drop what wasn't used (normally, it only drops
entire files).
Before (on Linux, built with -O3, no LTO):
text data bss dec hex filename
1746385 7920 3750 1758055 1ad367 bin/moc
1444101 6664 1894 1452659 162a73 bin/rcc
4407725 1568 4896 4414189 435aed bin/qmake
After:
text data bss dec hex filename
1131655 6520 3494 1141669 116ba5 bin/moc
1027043 5480 1766 1034289 fc831 bin/rcc
3578489 1656 5313 3585458 36b5b2 bin/qmake
Gain: 35% on moc, 28% on rcc, 19% on qmake
Before (on OS X):
__TEXT __DATA __OBJC others dec hex
1495040 12288 0 4294993008 4296500336 100176470 bin/moc
1265664 8192 0 4294983904 4296257760 10013b0e0 bin/rcc
5279744 81920 0 4297912320 4303273984 1007ec000 bin/qmake
After:
__TEXT __DATA __OBJC others dec hex
806912 8192 0 4294988132 4295803236 1000cc164 bin/moc
720896 8192 0 4294979764 4295708852 1000b50b4 bin/rcc
4841472 77824 0 4295580688 4300499984 100546c10 bin/qmake
Gain: 46% on moc, 43% on rcc, 8% on qmake.
Change-Id: Icc7cdc9fd6f5db15537b4adabaac7e7a27e539d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Move it from bootstrap.pro into qt_module.prf so it will apply to any
other bootstrapped libraries, like libQmlDevTools.
Variable called "SPLIT_SECTIONS" because -fdata-sections could be added
in the future, if it proves to be a benefit.
Change-Id: I3fbb004f111620a84e58e9112e9bce3afd95631e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
that is, make it match the shell used by the make command.
this is unlike DIRLIST_SEPARATOR and DIR_SEPARATOR, which always match
the actual system shell.
Change-Id: I0fb277d75b32be029808623a3b77e1358c4e265e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows the developer to provide a list of languages to the manifest
by listing them in WINRT_MANIFEST.languages. It also allows setting the
default language with WINRT_MANIFEST.default_language.
Task-number: QTBUG-38557
Change-Id: I5cb94c9f45146e3068d0833b9e669dc17dca14b2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This is the right configuration of the platform within the mkspecs.
It enables the usage of additional features like the automatic
detection of platform specific prf files.
Change-Id: I2f19265d283e47c62455128f217bc44ba88cdc98
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Visual Studio does not like empty dependencies block in manifest XML.
At least my Visual Studio 2013 fails to open visual manifest editor for
XML containing the following block:
<Dependencies>
</Dependencies>
If the block is removed or if the block has one or more PackageDependency
entries the editor accepts it.
Moved the <Dependencies> block to prf, so that it is only written when
project really has dependencies. Also <Capabilities> block is moved to prf
for consistency. On Windows Phone, where the <Capabilities> block is
required, it is kept in the output even if it is empty.
Change-Id: I531180d0081e4612f75be54f3813831857f1ed43
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds a new config option to qmake to enable full optimization
where it makes sense. This currently is supported on all gcc like
compilers by exchanging -O2 for -O3.
In qtbase it is used to enable full optimizations on qtcore and qtgui
and in a later patch can be used to replace similar existing logic in
QtWebKit's WTF and JavaScriptCore modules.
This fixes a performance regression from gcc 4.7 to 4.8 in the software
renderer.
An aliasing error in qregion.cpp which was exposed by more aggresive
optimization has been solved as well.
Change-Id: Ic2c6c41b79cb3846212b40e7bcc11ff492beb27f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
ARM and x86 platform defines are identical, so they can be kept in a
common file.
Change-Id: I6f79cadb2e5ce265e4a5a7a0806379dc8793e539
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This comment is wrong and should be removed. The manifest is always
generated.
Change-Id: I281737dd6a358380fb557063eadae88909f5078b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This feature (package_manifest) generates a basic application manifest
from a template provided by the mkspec or the developer. It is meant to
deliver an out-of-the-box build experience without attempting to
exhaustively cover all manifest options. It is meant to be a starting
point which allows the developer to customize the manifest further. It
also becomes the default package manifest generator for Windows Phone,
replacing autogen_wmappmanifest.
Common variables, such as the target executable, are populated by qmake
in the newly created manifest. Default icons are also created if needed,
as the build will fail without them. The input manifest can be set by
assigning a file name to WINRT_MANIFEST. Additional options are
documented in the .prf file. If an existing (non-generated) manifest is
already in the directory, it will not be overwritten.
Task-number: QTBUG-35328
Change-Id: I57576a17ff9d2b564c0828f815949cb26d276bfd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Dwarf-2 is treated as deprecated (at best) by llvm, and does not support
a lot of C++ language features. Most notably, it does not support
namespaces and template parameters. By not specifying the dwarf version,
the compiler can decide which version to use.
Change-Id: Ic32f9101c4db0f06a8ace8f5e04af9236d01598e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using wmain causes the problem that the linker seems to create some code
around it, which calls ExitProcess. That function however is forbidden by
the Windows Store Certification process and hence you cannot publish an
application currently. This does not apply to Windows Phone, which links
in such a way that this problem does not occur there.
With WinMain as the entry point this does not happen and also is the
default entry point. Testing locally shows that certification goes fine.
Since it does not pass the full command line string, the C-runtime method
__getmainargs is used instead. This also gives access to any environment
strings which may be passed.
Note that MSDN states that this function should only be used for desktop
applications. For XAML/C++ scenarios there is no entry function at all,
but rather the App object gets instantiated in the default template. But
this only works for XAML itself and not for plain C++ applications,
probably some other entry wrapper is created on the fly here.
Done-with: Andrew Knight <andrew.knight@digia.com>
Change-Id: I8a118eddf6cfeddeca7d676267e979af17123e02
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Those flags are required to pass the Windows Store App Certification
process. Otherwise apps are not allowed to be published.
The SAFESEH option is only required for x86.
According to documentation APPCONTAINER only talks about the
executable, but when running through the certification, the Qt modules
are reported to be errornous as well.
Change-Id: I5450687dcd5bc537149e331332e253c4617df55d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
it's very unlikely that these artifacts will need rebuilding during a
debugging session (these pdbs are meant to support crash dump analysis).
Change-Id: Ia8138f9298355b402d8dd3f042f85b669693de64
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Compared to other platforms there is no concept of a console
application in WinRT. Hence all applications need to be UI
applications and use winmain.
Furthermore winmain takes care of launch arguments to be
properly converted to arguments passed to user's main().
There is a chicken and egg problem with config.tests as
compilation needs to have an existing entry point which is not
available at configure time.
Hence hardcode the entry point to main for configuring to WinRT.
Those tests are pure compile tests, so the logic of the test
does not change.
Change-Id: I4d3186691a8440845c24b2529cc9646e86dfd8da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Winmd is not used, so there is no reason to embed it.
Change-Id: I0820256aecd9c3c71b0b0c8afa53941b03f97363
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Without that define here moc cannot handle qsystemdetection
properly. While having to touch the mkspecs I also removed
the no longer needed WINRT define.
Change-Id: I0609bd173c7bc14ccdd862afc777d7793dda02b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Using the same approach as, wince qfunctions_winrt
is introduced to replace functions not available
on Windows Runtime by their successor functions/
equivalents.
Additionally this functionality is used for implementing
a fake environment because WinRT does not support
getting/setting of environment variables. The approach
here is also the same that is used for wince.
Change-Id: Ifc3b6b796ab8e8ea41456f4c929f9c3f65f24a0e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
WinRT passes the executable and Appx server info to the CRT main, and
supports several additional activation arguments as well. This handles the
arguments passed to main as well as the case where a modern app is
launched from an external application (e.g. Qt Creator).
Task-number: QTBUG-30198
Change-Id: Ia843e98c7843d5705f5f6d1c809de0b6bcdb5d26
Done-with: Kamil Trzcinski
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This gives us better consistency across the Qt ecosystem.
Change-Id: Ie12ebb6e8c826ed2e0445eb37de0b79595da41c2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... except for MAKEFILE_GENERATOR = XCODE. This means the spec no longer
hard-codes g++, and will work regardless of whether the default spec was
clang or g++.
This require us to set QMAKE_XCODE_GCC_VERSION properly for GCC, so that
additional compilation flags passed by Xcode will match the actual
compiler used.
Task-number: QTBUG-31713
Change-Id: If65140a7471cd16f483036742f1d5b86d0485c52
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We'll use nm to get the listing of symbols in the next commit.
The -P option is "portable", which sounds like a good idea. I don't
have access to any of the commercial Unix systems, but I do remember
them printing a different format than GNU binutils's nm.
Change-Id: If6f80624bedaf2b1dabf608e16aa097d9910d739
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Xcode and SDK settings are expensive to resolve, as we're using
system() calls to resolve them. We now try to detect the presence of
a .qmake.cache file (and inform the user that creating one would be
a good idea), and use the file to cache the various settings after
resolving them.
The Xcode logic had to be moved form xcode.conf as part of the mkspec,
into default_pre/post.prf, so that we could cache() the resolved values.
Task-number: QTBUG-30586
Change-Id: Ib5368cfee6f7e4a4a33f6be70d0e20d96896fe56
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qmake requires the information which extension is
used for static libs on a platform. As the ci for
windows ce is pretty new, this was not noticed before.
Change-Id: I45b0c9c59980cd352371c00aa59502e5a394e337
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
The correct CFLAGS are already present in gcc-base.conf, which is
used as a basis for g++, LLVM, and Clang.
Change-Id: Ic19e28edc55e109ecfe372826b295b817afcd36e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We depend on Xcode for building Qt itself and user application on Mac OS.
The user may have an Xcode install that is not set up properly, in which
case we would fail compilation in mysterious ways. Instead we try to
detect misconfigured or missing Xcode installs as early as possible.
We try to detect if an Xcode install has not been chosen yet, and
if the user has not accepted the Xcode license agreement. We need to
do these checks both in configure, as early as possible, and in mkspecs
on Mac OS, as we need to error out if the user tries to build an app
with the Qt SDK, but with a broken Xcode install.
Change-Id: I4e3a11077a61dc5d4ee2c686d01044a9bb2c1c79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We always use the xcodebuild/xcrun/xcode-select binaries in /usr/bin,
as these will dispatch to the right binary based on what Xcode version
has been chosen using xcode-select -switch. This fixes an issue where
a tool was in the path from another Xcode installation. We can rely on
the tools as they are present on a clean Mac OS install.
Change-Id: I1d3cc1e92604f9be6d6f14639cb6322234edd696
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This means we have to bump the deployment target to Lion (10.7), as the
LLVM 'libc++' C++ standard library does not support Snow Leopard (10.6).
For iOS the deployment target has to be bumped from 4.3 to 5.0, but we
don't enable C++11 by default yet as it's not tested enough on iOS.
Users who wish to deploy to 10.6 need to build their own Qt,
passing -no-c++11 to configure.
Change-Id: I7b5d20ab002db889d1091a4b7ff600f62caa7f06
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
In order to build Android Qt on Windows via
cmd.exe using the unix makefile generator,
mkspecs/common/shell-win32.conf needs
QMAKE_SYMBOLIC_LINK and QMAKE_LN_SHLIB
Change-Id: I1b3eded66cec06ab131f127c1d46b99124613561
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of unconditionally linking to Foundation, UIKit, and QuartzCore,
we leave the dependencies for the iOS platform plugin, where the libs
are actually used.
Change-Id: Ie8cfad2c8230d1f1af6933b831e443fecb0c93f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace all tabs with proper space characters and consistently align
the '=' characters. The default alignment for the '=' of 25 characters
has been left as is to get a minimal diff. Lines with the '=' further
to the right and those belonging to 'proper code (TM)' have not been
touched.
The work was mostly done using the following python script (might
come in handy again...):
import sys, re
indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character
p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)')
for fn in sys.argv[1:]:
with open(fn, 'r+') as f:
lines = []
nl_count = 0
continuity_indent = None
for l in f:
m = p.match(l)
nl = l
if m:
n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1))
if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0:
n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4
n_spaces = max(1, n_spaces) # we want at least one space before '='/'+='
nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n'
continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$'
elif continuity_indent:
nl = ' '*continuity_indent + l.lstrip()
if l[-2] != '\\': # check when to stop the continuation
continuity_indent = None
elif l.startswith('#'):
nl = l.expandtabs(2)
if l != nl:
nl_count += 1
lines.append(nl)
if nl_count > 0:
print fn, nl_count, len(lines)
f.seek(0)
f.writelines(lines)
f.truncate()
Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Qt uses a lot of minor C++11 extensions such as long long, commas at the
end of enumerator lists, and extra ';' outside of a functions, and not all
of these can be silenced, so we build without warnings for C++11 extensions,
since we plan to enable C++11 at some point anyways.
Change-Id: I3ede2fb653c25475a3bd2b860c0c80c6cf6abef5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For Mac OS X we currently specify build tools without an absolute path,
which means we end up using the ones in /usr/bin. This is wrong, we
should be using the tools from the toolchain of the chosen SDK.
For iOS we do specify an absolute path, by resolving the toolchain
path in the iOS makespecs.
To solve the situation on Mac OS X, we move the logic of resolving the
toolchain path to sdk.prf, and share it between OSX and iOS.
For configure we need to duplicate some of the logic from sdk.prf, as
configure pulls out QMAKE_CC and QMAKE_CXX for running some initial
tests and building qmake. The new macSDKify function also solves
the issue of missing sysroot and deployment version in the flags.
Change-Id: Ib1d239c9904cf3ccee5214b313cf6205869a1462
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It is unused in the source code and replaced by Q_OS_LINUX,
Q_OS_ANDROID and Q_OS_ANDROID_NO_SDK depending on usecase.
Change-Id: If8d561540e7583fbac83c0f3506f219c4433e847
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
We want the second member from 'Xcode 4.x', and $$first() gave us
'Xcode' instead of the version number.
Change-Id: Iaf0ed9dc89a03f7918290a61bddade82651ad0f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The only difference between the two is that iOS append @executable_path/
to QMAKE_LFLAGS_SONAME, but since shared libraries are not supported on
iOS anyways, this is not really something we have to care about.
Change-Id: I4797a4dfb94d9b3af03af22618351b98b48f8255
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This is a step towards making mac a shared scope for both Mac OS X and
iOS, while macx is Mac OS X specific and ios is iOS specific.
We'll then move iOS to not include macx.conf, once we make the change
to not have iOS imply macx.
Change-Id: Ic9ce4d597873aa3cf2c981598354733e07db644d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
If there are minor differences later on we can put them in the
mkspecs' forwarding header and/or introduce a macx specific file.
Change-Id: I2a93107838e0d8434c0d444db3064e0a462fa656
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
If the command is quoted, it can contain anything but quotes (we do not
support escaped quotes, so single quotes have to be used). If the
command is unquoted we look for the first closing parenthesis. We used
to do this using .*?, but the greedy modifier '?' didn't seem to work,
so we now use an inverse character set.
Change-Id: I40660ce7aef6a6b6d480292d28da1b079bb161da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to figure out where to draw the line when it comes to warning
about unknown compiler (Clang), Xcode, or SDK versions, but for now
building with Xcode 4.6 should not be an issue. We'll have to revisit
this and test with the full set of compiler/Xcode/SDKs we support
before the final release.
Change-Id: Iac3ec3a25c0f7618b2c3714657d147f17f834d97
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
At some point we want to build with C++11 support, but for now we silence
the warning.
Change-Id: I40deb0925d459eaf06e324dddc0a2e9893c57615
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Defining QT_QPA_DEFAULT_PLATFORM_NAME in qplatformdefs.h is not
neccecary, as qconfig.h will already have this define written by
configure.
Change-Id: I89d9191533f6b4e6bfd5eade6cc0dced02b50f81
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: Ic04da6063863585665c9133caba0279ba478fbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
As long as Qt Creator does not provide any iOS integration, and the
app bundle we create using the Makefile generator is not good enough
to deploy to a device anyways, producing Xcode projects make the most
sense.
We base the decicion on whether or not the project depends
on QtGui and has app_bundles enabled. This prevents configure
tests and other tools from having Xcode projects, but allows
examples and demos to build out of the box.
Instead of setting the generator unconditionally we unset it in
default_pre so that we can detect if the user set it manually. This
means the user won't be able to inspect the MAKEFILE_GENERATOR variable
from the pro file, but this is less of a use-case then overriding the
generator from the command line or prooject file.
Change-Id: I881cf3e29631445f83ea4ff0979f7a566e4810f5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
And use configure's -sdk argument to choose between the iphoneos and the
iphonesimulator SDK. xcodebuild -showsdks can be used to list the
available SDKs. Passing an SDK without a version postfix implies
the latest version of the SDK.
Change-Id: I881df754d522fc91aaa16ba3e39cf0c37a21a1f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead we deal with any differenced by setting variables in the top
level makespecs, that are used by the common makespec configs.
Change-Id: Iae1fb5fef8c95778511ed400008731989b446f3c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
NEON detection is handled by configure's arch test, and THUMB2 is the
default for ARMv7.
Change-Id: I8ec3ce0ec6af9ad8d9509890aa1f8c87e18364d5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We now require SDK version 4.3 or above, and armv7.
Change-Id: I4766e277a3a4a32712bf2ec27fede694e8316c95
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There's no need to duplicate the logic for device vs simulator. The only
difference is the iPhoneOS/iPhoneSimulator name.
Change-Id: I87c57fa785279a3ee258b76fdac8317e52e7daa2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We treat iOS as a variant of Mac OS, so for iOS both Q_OS_MAC and
Q_OS_IOS will be defined. This matches what Apple assumes in the
header file TargetConditionals.h
Change-Id: I55cc851401b748297478e4c32e84e0f6e1fdfc28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
