The test used to output random character sequences which contained
terminal control characters. Change it to output plain ASCII and
Unicode syntax for non-ASCII characters.
Change-Id: Ifaa72f50242bd27416a8698a1f5152bc8b902898
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Q_OS_DARWIN is the general replacement for Q_OS_MAC,
but most/all of the MAC sections in this test are
OS X specific.
Change-Id: Ic54af9d3dce1e1952a57e15b74acdedf2af60c79
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The test should not depend on qWait explicitly
Change-Id: I13c01c47c9f7bae8b0c30afa2ac8550dc0fbf028
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Fix regression in a7b0cb467c which caused
it to be hard to start scrolling at the ends of a scroll-view if using
fine grained scrolling events.
Change-Id: I55f3210150b993281545c3ad5a7356d892fa30b5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The widget is hidden, reshown and tested for active window, which
is flaky. Add a call to activateWindow() which increases
the chances of it becoming the active window should another window
appear.
Change-Id: Ibbecdbc43e2ac9638aec497c47fffaaffa1855af
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
On some operating systems, tzdata files carry the Local Mean Time (LMT)
for the city in question, which better represents how time was tracked
before standard, hourly timezones were introduced in the early 20th
century. The test was asking for the data for 1653-02-09 and assumed
that it would find the first Central European Time (CET) rule, which
Germany didn't start using until 1893-04-01.
This fix allows us to remove the blacklist that had been applied to this
test without investigation. It wasn't related to OpenSUSE, aside from
the fact that OpenSUSE tzdata carries the LMT data.
Change-Id: Id5480807d25e49e78b79ffff1449bdaf46901367
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
libdbus will send a local signal if connection gets disconnected. When
this happens, end all pending calls with QDBusError::Disconnected.
Task-number: QTBUG-51649
Change-Id: I5c7d2a468bb5da746d0c0e53e458c1e376f186a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is not exhaustive, but was enough to discover ICEs.
Change-Id: Ib60be1d298a66b72e3eb9b75ad538f0bf15b5f62
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Simo Fält <simo.falt@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pushing the mouse rapidly to the top left corner causes KDE / KWin to
switch to "Present all Windows" (Ctrl+F9) mode, showing all windows.
This has been observed to be triggered programmatically by
QCursor::setPos(0, 0) if there is no other window beneath and apparently
depending on the perceived mouse "speed".
Suppress this by using the bottom right corner for XCB.
Change-Id: Id18d2f45a095ed4d4f365f010cf45a20b0d9435e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The "path" of a mailto URL isn't a file, so we shouldn't try to do
glob-based matching. I was getting application/x-ms-dos-executable
for a .com domain and application/x-perl for a .pl domain...
Change-Id: Ifc346c3bba83ba1a8476db3202492f4c2e4d52bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Suppress message dialog of the test helper as does QTestlib.
Task-number: QTBUG-52714
Change-Id: I5efd7d72f77c7689500ecaccf46f1f9dfb312140
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Use the correct parent path for the renamed file when creating
QFileInfo. It must be a path to the parent directory, not to the
root directory of the model.
Modify tst_QFileSystemModel::setData() to test renames in subdirs
of the root directory of the model.
Change-Id: I69d9e3a937616857a81617791ed118af3f6eea05
Task-number: QTBUG-52561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Return pixmaps with device pixel ratio similar to QScreen::grabWindow(),
cf c0963486ce.
Adapt kernel tests accordingly.
Task-number: QTBUG-52137
Change-Id: I9ce276d5e2d87ae0d39c8639267d1ac283fed854
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The old code incorrectly calculated visual region for a selection (specified by
QItemSelection object) in case of reordered / swapped rows or columns. It used
the leftmost and rightmost (upmost and downmost for vertical mode) logical
indexes directly. However some middle logical index (in case of reorder) may be
the leftmost or rightmost visual index. In such cases the repainting didn't
work properly. This fix first checks whether reordering / swapping is in use.
If it isn't (ie visual=logical) we use code similar to the old code. Otherwise
the new code scans all selected logical indexes, translates them into visual
ones and gets the correct leftmost and rightmost indexes.
[ChangeLog][QtWidgets][QHeaderView] Fixed a repainting issue when items had been reordered.
Task-number: QTBUG-50171
Change-Id: If6afabebf445cf32a8e0afe262b6ee149e7c4b2b
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When the formatting parameter wasn't exactly QUrl::EncodeUnicode, it
wouldn't encode, despite having to.
Change-Id: Id75834dab9ed466e94c7ffff1444bacc08dd109b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
The RFC does allow it. It even has examples showing them as valid. In
section 6.2.3, it shows:
http://example.comhttp://example.com/http://example.com:/http://example.com:80/
Change-Id: Id75834dab9ed466e94c7ffff1444b7195ad21cab
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The behavior was different in the variadic template code and in the C++98
code. The code without variadic template support was not copying the functor
object (e.g. a lambda) before calling it.
However, in the variadic template section, QtPrivate::FunctorCall::call
took the functor by value instead of by reference resulting in a copy.
QtPrivate::FunctorCall::call is a helper function for
QtPrivate::FunctionPointer::call which is only needed for variadic template
expension.
[ChangeLog][QtCore][QObject] If the compiler supports variadic templates,
no longer copy functor connected to a signal each time the signal is
emitted. Restoring the C++98 behavior.
Task-number: QTBUG-52542
Change-Id: I3ca20ef6910893b8a288e70af7de4c7b69502173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follow-up to commit 6fd205d5: document which version of danted shall
make one work-around redundant, document that another work-around is
still needed even with that v1.1.19; and remove a comment that
referred back to an XFAIL that commit 6fd205d5 removed.
Change-Id: I270b662528127c82184bff20b3cecea4f0c41b41
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QSKIP() causes the whole test to be skipped, where this work-around
for a known quirk of the test server only requires skipping a single
Q_COMPARE(); the rest of the test passes fine without it.
Change-Id: Ie4612bd428f4cb4b342fad908cc2784fbadf069c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Before this change QFile::errorString function was returning an
"Unknown error". Now it will return the typical ENOENT string.
Task-number: QTBUG-45259
Change-Id: Ib7634f1aa5d91f77151cf92c58d3956e20a4cc6b
Reviewed-by: hjk <hjk@theqtcompany.com>
Use QFINDTESTDATA to find the socketprocess helper executable.
Now tst_QLocalSocket::processConnection() passes when started from Qt
Creator without adjusting the working directory.
Change-Id: I97ca3334a381b3cd646647487529bcd90b969528
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(for instance any global object which writes out to a config file in the
destructor). If the global cache isn't available anymore, don't use it.
Change-Id: I851a6e394d0b073aebf3ffd88b1966d424bfb92e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: I0c94a5c2846b48c8aea7ffff1435b8a7ccbd4d9e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Add some extra checks to the parser to make sure that addresses
like "300-05" aren't interpreted as valid IPv4 addresses.
Change-Id: I12475eebc9452e060779bb05e2b4ad9512a28281
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
After 909d3f5c7, private families will not be shown in user interface.
Task-number: QTBUG-41318
Change-Id: I15ae77cacd2a27c9db4b1a8ffbb582416258988c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
According to RFC 2640, FTP uses UTF-8 encoding. Fix the conversions
accordingly.
Task-number: QTBUG-52303
Change-Id: I615199b3d074fc3861f25df113dda672525766b6
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Ensures that QStyleOption is correctly initialized.
This prevents possible styling issues due to
QStyleOption's reporting version 0, see qstyleoption_cast.
This enables users to handle more cases in their QProxyStyle.
For now the test is only used for QCommonStyle.
Change-Id: I768db00b12b46890343fffe44e4f562762e9cf80
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Don't access first() of a potentially-empty QList.
Check for QHostInfo::error() first.
Also change to constFirst() to prevent a detach.
Change-Id: I91fa0bbfb21f62af29abdb23b4869a7f039b259e
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The flags here are passed to a private QVariant constructor, and they
really represent a boolean - IsPointer or not.
Because the flag for the key_type was incorrectly populated with the
flag for the value_type, memory would be corrupted when using a mapping
type whose value_type is a pointer, but whose key type was not, such as
QMap<QString, int*>
This typo has been there since the concept was introduced in commit
v5.2.0-alpha1~807 (Add container access functionality for associative
containers in QVariant., 2013-04-05).
Task-number: QTBUG-52246
Change-Id: I9ecb13c603015eed2dc2ca43947fa0ecd6be8b5a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
People use this, so make sure there's a test for it.
I don't expect this test to fail, but static and
dynamic checkers should be presented with this
use-case, so they have a chance of warning, because
certain implementation strategies of QPointer may
make this code undefined.
Change-Id: I334bd73204ba4e186c4098fc6b7188917407e020
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Some strings were drawn with a different size or scaling than what the
string itself said, causing confusion.
Change-Id: I4b187cba6d467cfa0900576bdf451052baa806e6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
If moc is invoked with the @ argument and no options file is specified
or the options file cannot be read, do not try to parse the empty
arguments list. Otherwise QCommandLineParser will print an additional
error message that is of no value for the user.
Task-number: QTBUG-51847
Change-Id: I9aa1eb20a44097b553123be8bc6fded87473a03a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QImage::pixel() assumed that the color table was valid
for the values in the bitmap. This was always wrong
for indexed images with explicit no color table set and
was wrong for mono images that were constructed from
preexisting data.
For mono images, we default to a black/white color table,
like we do when constructing with uninitialized data.
For indexed image, we always default to no color table,
but instead of crashing in pixel(), we warn and return
an undefined value.
[ChangeLog][QtGui][Image] Fixed possible crash in QImage::pixel()
for mono or indexed images.
Change-Id: Ieaf19c03984badddfd06e1855a7e287b862adc70
Task-number: QTBUG-50745
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
This change disables tests which require QtGui.
Change-Id: Ib647afd086f54536054cb4c0cde5696d762ee8c4
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
The old code converted QRectF into QRect when applying the offset. Change
the offset point to QPointF and change the conversions accordingly. Add an
autotest similar to that of QPlainTextEdit.
This minimizes rounding errors and prevents conversions since
the input method logic mostly uses qreal.
Task-number: QTBUG-51923
Change-Id: I0c2f80ccae028d8bbbb97ec603f8782f69959c76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Determine offset point to similar to QTextEdit::inputMethodQuery()
and add an autotest.
Task-number: QTBUG-51923
Change-Id: I8232eb348063e2cd95d0632fe74a6eb30c897eda
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Subjects each *.png file that matched grep -law "sRGB" to:
pngcrush -ow -brute -rem allb -reduce
(Two needed -force but did get smaller.)
Change-Id: Ia030f0bc1d3617ba716bcc26677ff919ef58423c
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Its currently not possible to style the arrows with QCommonStyle because
drawPrimitive from QCommonStyle is called instead from the proxy.
Change-Id: I910b13df110601cb18578bc16edfa5ddaa17bbd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The previous implementation overwrote multiple 'time' parts in the
qSetMessagePattern with the last setting in the pattern line.
%{time}%{time process}%{time boot} ended up to be output as if
%{time boot}%{time boot}%{time boot} was set.
This fix keeps the arguments of each individual 'time' part.
The same holds for multiple 'backtrace' parts. The previouse
implementation overwrote multiple 'backtrace' arguments with the
arguments of the last occurrence.
This fix keeps the individual arguments for the 'process' parts.
The individual arguments are applied in qFormatLogMessage.
A new test to verify the individual 'time' arguments application
is added, too.
Task-number: QTBUG-51944
Change-Id: Ib757614a482c5f31ed0a61b550daa2eea4b907b4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QWindowsPipeWriter doesn't write in a separate thread
anymore.
Change-Id: Id978bfdfa2531be91cce94476ab9b0dff237bd61
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Drop addSub() test. It executes exactly the union of fetchAndAdd()
and fetchAndSub(), which have already had their UBs fixed.
No need to do fixes in duplicated code.
Change-Id: Ib72caab0310fce3ff9a40c261d8a38518f91ecaf
Reviewed-by: David Faure <david.faure@kdab.com>
Commit 0307c008 removed the buffering of data-to-be-written from
QWindowsPipeWriter, because it was assumed that users of this class
(QProcess and QLocalSocket) already buffer data internally.
This assumption was wrong for QLocalSocket. The following sequence
localSocket->write(someData);
localSocket->write(someMoreData);
would not write anything on the second write.
Add a write buffer to the Windows implementation of QLocalSocket.
Task-number: QTBUG-52073
Change-Id: I6d0f03a722ec48138cbde3e2f69aae7dafe790d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
