§24.4.1 [iterator.traits] of N3337 makes it *mandatory* to define the
various types
std::iterator_traits<Iterator>::{value,pointer,...}
for any given iterator.
§24.4.1.2 makes it enough to define them within our iterator class.
Change-Id: I1305c8392d224889b09395e30ecc77b194020a15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 5b9006bbdb.
Also revert "Doc: Enable documentation for QScopedPointer's rvalue ref functions"
This reverts commit 5f8416ec65.
Adding a move contructor to QScopedPointer makes no sense, because moving
means 'escaping the scope', which breaks the fundamental point of
QScopedPointer.
Change-Id: I4ac1b108bf199af6e436fa1629aa2d3b93c27724
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To ease interruption of long running tasks, a new method
QThread::setInterruptionRequested() can be called.
The task can check QThread::isInterruptionRequested()
and act upon it by stopping itself.
These methods are designed to replace the use of a global variable
and other hacky ways to stop a task running in another thread.
Change-Id: I17622dd60d2262078210e7e4294ad6c53a6dc179
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a new method to return the time zone abbreviation for the current
time spec. For LocalTime this is the abbreviation returned by mktime.
This new method will later be used in changes to the date formatter
and QTimeZone.
Note this change does not implement WinCE support.
[ChangeLog][QtCore][QDateTime] Add method timeZoneAbbreviation() to
return effective time zone abbreviation.
Change-Id: I265a5e96c72eb7236974f80f053f1fb341e3c816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QTEST_NOOP_MAIN was removed in Qt 5, but was still in the source of the
QProcessEnvironment auto test.
Change-Id: I0048c330c9d4e99c46192cc05ffd3b77d404fb6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Since Qt5, the QMetaObject do not contains the string name of the
builtin types, but only the QMetaType id. QMetaMethod::typeName
convert back from the id to the string. But if the type is aliased,
the string of the main type is returned.
This was the case for example for qint64 which is transformed to
"qlonglong".
This causes a regression in QMetaType::invoke when trying to invoke a
method which return an aliased type, since the string comparison would
fail.
Fix the problem by also comparing the metatype id.
Changelog: QMetaMethod::invoke: Fix return of aliased meta type
Task-number: QTBUG-33222
Change-Id: Iec7b99dcbf7b23eb818de74f413e4451ce510ac4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
(dacf9961da)
In order to see 2 active threads, we must check activeThreadCount() before
the runnable finishes.
Change-Id: I1a48b41e0c1fd81a65d915b9bd1e741ff267ed2b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This extends the QLinkedList auto test. This is copy paste
with small edits from the QList auto test.
Change-Id: I5bce7ee304998d1c7258f11b2f31a7fb87706936
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The QCommandLineParser class provides a means for handling the command line options.
QCoreApplication provides the command-line arguments as a simple list of strings.
QCommandLineParser provides the ability to define a set of options, parse the
command-line arguments, and store which options have actually been used, as
well as option values.
Done-with: Laszlo Papp <lpapp@kde.org>
Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was inserted into the shared data (i.e all instances)
Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures correct detach when insert with an iterator is
called on a shared instance (i.e same behavior as QVector)
Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before calls to erase on a shared instance would in release mode
imply that items were removed from the shared data (i.e all instances).
In debug mode it would assert.
This patch improves the behavior to detach and erase items
specified by the iterator(s) (i.e same behavior as QVector)
Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUrl("http%3A%2F%2Fexample.com") has only a path of
"http%3A%2F%2Fexample.com". In Qt 5.0 and 5.1, the %3A would get decoded
to ':', which in turn makes the URL invalid (colon before first slash).
Found via discussion on the interest mailing list.
Change-Id: I7f4f242b330df280e635eb97cce123e742aa1b10
Reviewed-by: David Faure <david.faure@kdab.com>
This fixes the wrong value for path() and fileName() when a
path or file name actually contains a '%'.
userInfo() and authority() are not individual getters, they combine
two or more fields, so full decoding isn't possible (e.g. username
containing a ':').
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
defaults to decoded mode in the getters and setters for userName,
password, host, topLevelDomain, path and fileName. This means a '%'
in one of those fields is now returned (or set) as '%' rather than "%25".
In the unlikely case where the former behavior was expected, pass PrettyDecoded
to the getter and TolerantMode to the setter.
Change-Id: Iaeecbde9c269882e79f08b29ff8c661157c41743
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The unit tests were caching the original TZ value to restore later
after testing with different TZ values. The problem is reading TZ will
return a null value if no override TZ value is set, and if you then set
the TZ to null the system assumes UTC and not the system time zone.
Instead we need to unset TZ if it was null to start with.
Change-Id: Ib0625b1712e565f9fdfa99e2ffe1e5d74f059354
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
Invoking waitForStarted() on a QProcess before or after an unsuccessful
call to start() (e.g., with an empty command), would execute FD_SET with
an invalid file descriptor and cause the process to abort.
The bug can be reliably reproduced on OSX.
Task-number: QTBUG-32958
Change-Id: Id25b7781168489281645e21571361ca1a71d43e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follows a similar include-pattern as the qguieventdispatcher test.
Change-Id: Ie8669a5bc155abd6687e81526f2b95d0d19b009e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
A QCoreApplication may run a different event dispatcher, such as the
QEventDispatcherBlackberry, and QGuiApplications will have the GUI
dispatcher provided by the QPA plugin, such as QCocoaEventDispatcher.
Neither support X11ExcludeTimers.
Change-Id: Id5ea1c7dd74a127e13fa4d2eaa9a1bd2715a9dbb
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is a flaky test on Windows 8 64-bit, so marking it as
XFAIL if it is expected to fail.
Task-number: QTBUG-30943
Change-Id: Idd276f80b54fcd5cf295a7e1adebcf0020eaa8ca
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
QStandardPaths::enableTestMode has a verb in the imperative ("enable")
as the core word in the name. That indicates an action. The function
should not have had a parameter.
Instead, add a Qt-style setXXXEnabled function.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths::enableTestMode is
deprecated and is replaced by QStandardPaths::setTestModeEnabled.
Change-Id: Ib26ad72d7c635890d2cb22ae9d44cbda08a6f17c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Mark some tests as expected failures on OS X 10.8
- tst_QSettings::ctor(native)
- tst_QSettings::ctor(ini)
- tst_QSettings::ctor(custom1)
- tst_QSettings::ctor(custom2)
- tst_QSettings::rainersSyncBugOnMac(native)
Task-number: QTBUG-32655
Change-Id: I54928d991a8ccf300b40747feaa6fda9d124781b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
As Qt still thinks that all UNIX filesystems are case sensitive, which
is not the case for eg Mac, where they might be both, as well as for
mounts of other filesystems.
Change-Id: I07b8550685bfa17ac407c20ac991dc54df040942
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This prevents deadlocks in case the destructor re-enters.
(Example: a functor containing a QSharedPointer of a QObject)
This also fixes a leaked slot object in disconnectHelper.
Change-Id: Ia939790e3b54e64067b99540974306b4808a77f2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: Icd6a09402c3cf14286f4ba1f8f4c99ac483ec1a3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Added the compiler options, we need the info of sdk.
Task-number: QTBUG-32715
Change-Id: I70612f36a16e0ab5025194a10ce399822e159c7c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By not assuming that the file system is case insensitive. OSX supports
both.
Change-Id: I11a4ac4cdff97b97b183dd319757a42ae14bb52d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Make qabstractproxymodel and qidentityproxymodel build and run
even if -no-widgets is used since they don't depend on Qt Widgets.
Change-Id: I48bc2f6a78812b1bf0083f76c6a4e106f4e38650
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For some time, we've assumed that the URL specification had a mistake in
that it didn't allow the "#" character to appear decoded in the
fragment. We've gotten away with it so far.
However, turns out that the CoreFoundation NSURL class doesn't like it.
So we have to be stricter.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %23 found in the fragment to "#" in the output of
toString(QUrl::FullyEncoded) or toEncoded()
Task-number: QTBUG-31945
Change-Id: If5e0fb37bae84710986c9ca89bd69ec98437cd63
Reviewed-by: David Faure (KDE) <faure@kde.org>
It's a good practice to always replace bad UTF-8 sequences with the
replacement character. It could be considered a security issue too.
Change-Id: I9e7d72e4c4102cdb8334449b5e7f882228a9048f
Reviewed-by: David Faure (KDE) <faure@kde.org>
Those sections contain more than one components of a URL, separated by
delimiters. For that reason, QUrl::FullyDecoded and QUrl::DecodedMode do
not make sense, since they would cause the returned value to be
ambiguous and/or fail to parse again.
In fact, there was a comment in the test saying "look how it becomes
ambiguous".
Those modes are already forbidden in the setters and getters of the full
URL (setUrl(), url(), toString() and toEncoded()).
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer supports QUrl::FullyDecoded mode in authority() and userInfo(),
nor QUrl::DecodedMode in setAuthority() and setUserInfo().
Change-Id: I538f7981a9f5a09f07d3879d31ccf6f0c8bfd940
Reviewed-by: David Faure (KDE) <faure@kde.org>
The longer explanation can be found in the comment in qurl.cpp. The
short version is as follows:
Up to now, we considered that every character could be replaced with
its percent-encoding equivalent and vice-versa, so long as the parsing
of the URL did not change. For example, x:/path+path and
x:/path%2Bpath were the same. However, to do this and yet be compliant
with most URL uses in the real world, we had to add exceptions:
- "/" and "%2F" were not the same in the path, despite the delimiter
being behind (rationale was the complex definition of path)
- "+" and "%2B" were not the same in the query, so we ended up not
transforming any sub-delim in the query at all
Now, we change our understanding based on the following line from
RFC 3986 section 2.2:
URIs that differ in the replacement of a reserved character with
its corresponding percent-encoded octet are not equivalent.
From now on, QUrl will not replace any sub-delim or gen-delim
("reserved character"), except where such a character could not exist
in the first place. This simplifies the code and removes all
exceptions.
As a side-effect, this has also changed the behaviour of the "{" and
"}" characters, which we previously allowed to remain decoded.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer considers all delimiter characters equivalent to their
percent-encoded forms. Now, both classes always keep all delimiters
exactly as they were in the original URL text.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %7B and %7D to "{" and "}" in the output of toString()
Task-number: QTBUG-31660
Change-Id: Iba0b5b31b269635ac2d0adb2bb0dfb74c139e08c
Reviewed-by: David Faure (KDE) <faure@kde.org>
7721c3d27c fixed the case where two similar definitions are in the same
directory. This commit fixes the case where two similar definitions are
in different directories, both in the search path (GenericDataLocation).
If the file extension gives us the same mimetype twice, there's no conflict,
i.e. no reason to fallback to determination from contents.
Change-Id: I72c56004b6d5e88964159e53ec160ce8b06c2264
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On some platforms (like BlackBerry) qDebug doesn't write to stderr,
so we directly write to stderr with fprintf.
Change-Id: Ib86211c98cf4da1fa2dbea4600a78e2013dc1a5a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Halley's method to get a better approximation is omitted, if it
would include a devision by zero (INFINITY/NaN is worse).
Change-Id: Ida09326e2b5892d7cb21bcb956631c289e5b56ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It makes sense for a QScopedPointer to be movable, for instance
for allowing instances to be returned from a function.
Ownwership of the managed pointer is still tied to one (and one only)
QScopedPointer instance.
Moreover, a move assignment operator makes sense as well, as it
implementing the equivalent of
this->reset(other.take());
only when other is a rvalue and not a lvalue (so either it's a temporary
or it's getting explicitly moved in with std::move).
This makes QScopedPointer API's a bit closer to std::unique_ptr's one.
Task-number: QTBUG-29754
Change-Id: If1ac0c688327a67af4ad5b7ad45b439b022ed1c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime can now be converted to strings compliant to RFC 2822.
Additionally, it supports RFC 850 and RFC 1036 during parsing.
By having them all together, all type of dates found in exchanged
messages on the internet (including USENET) get supported.
Change-Id: I771066c23f409d20b31b7d802f37852ea68ca2a0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Codecs registered by creating new QTextCodec instances should be listed
there.
Task-number: QTBUG-32500
Change-Id: I56c00e0d6bbfef55a6cbd571bcf9aa2cf333ef3a
Reviewed-by: David Faure <david.faure@kdab.com>
Currently tst_QEasingCurve::setCustomType() is always failing on CI
when ran on 32 bit 11.10 Ubuntu.
Task-number: QTBUG-32432
Change-Id: Iaf346c14985f14716692fe996714b7040fb70930
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
We don't know what it might be used for. The RFC for URI says it's an
HEXDIG, and since we uppercase all other HEXDIGs already (in
percent-encodings...).
Change-Id: I56d0a81315576dd98eaa2657c0307d79332543a5
Reviewed-by: David Faure (KDE) <faure@kde.org>
So far, this function hasn't been used for input coming in from the
user, so it wasn't necessary. But we may want to do it, or we may
already be doing it accidentally somewhere that isn't triggering the
failed assertions during unit testing.
So let's be on the safe side and allow it. And test it too.
Change-Id: Ib63addd8da468ad6908278d07a4829f1bdc26a07
Reviewed-by: David Faure (KDE) <faure@kde.org>
We have no idea what it might contain, but test it anyway to make sure
it works. Turns out there were a few bugs the unit tests have now
caught.
Change-Id: I0a6c868365feec31c2360b3c341c8ca6944f4352
Reviewed-by: David Faure (KDE) <faure@kde.org>
Registered names and IP addresses can only contain unreserved
characters (letters, digits, dots, hyphens, underscores) and the
colon, which is a gen-delim. For registered names and IPv4 addresses,
we can simply use the default config -- if anything that remains
percent-encoded, it means it's not a valid hostname anyway.
For IPv6, we just need to decode the colon.
Change-Id: If8083d47f6e5375f760e7a6c59631c89e4da8378
Reviewed-by: David Faure (KDE) <faure@kde.org>
It's not necessary to check at every point if we know the minimum file
size: it must contain at least the header, one segment (__TEXT) and one
section (qtmetadata). Most files have more than one segment and more
than one loader command, so this check does not mean we can eliminate
the checks further down.
Also be more resilient against corruptions in the header data: check not
only the additions, but the values themselves. For example, an offset +
size addition could be smaller than the file size when the addition
overflows in 32-bit. Another thing is that the cmdsize fields could be
corrupt too.
Change-Id: I7968a769c1cbe9150270c91823cafc4f8f833876
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We already had an ELF decoder, which helped us greatly to find the
metadata and that catches most Unix systems (Solaris, QNX, HP-UXi, and
all of the free Unixes). On other Unix systems, aside from Mac OS X,
we simply scanned the entire file for the signature. On Windows, even
without a COFF-PE decoder, we use a LoadLibrary trick to load the
plugin without loading the dependent libraries. In most cases, that
works.
Unfortunately, on Mac OS X we didn't have a decoder and nor could we
do the file scan: because Mac OS X binaries could be fat binaries, we
wouldn't know which architecture's signature we had found.
No more. This adds a full Mach-O decoder to QtCore. It is also capable
of finding the boundaries of the architecture's binary, but that
functionality is disabled since all Qt 5 plugins have plugin metadata
sections.
Change-Id: I2d5c04c5ecf024864b8a43f31ab6b7e6c5eae9ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The rule for a new override is that it must still work if the old
implementation is called. The catch is that any class that derives from
QProcess and isn't recompiled will still have QIODevice::open in its
virtual table. That is equivalent to overriding open() and calling
QIODevice::open() (like the tests).
In Qt 5.0, QProcess::start() called QIODevice::open directly, not the
virtual open(), so there's no expectation that a user-overridden open()
be called. With that in mind, simply fix QProcess::start to not call the
virtual open at all.
Similarly with QLocalSocket, the calls to open were always non-virtual.
Task-number: QTBUG-32284
Change-Id: I88925f0ba08bc23c849658b54582744997e69a4c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is a bit like QDir::cleanPath(), but for URL paths.
The code is shared with QDir::cleanPath(), by extracting the common parts
it into a helper, qt_normalizePathSegments().
Change-Id: I7133c5e4aa2bf17fba98af13eb5371afba64197a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The deadlock is caused because the QEvent is destroyed while holding the
event list mutex. And the QEvent may have a custom destructor that will
re-enter the event handlng code.
The QScopedPointer that should destroy the event must be created after
the MutexUnlocker.
Regression introduced by commit f9035587b9
Task-number: QTBUG-31606
Change-Id: I6b2cbc2656eacdec61b641886953f00bf5b3ff36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes for more informative debug output when the tests fail.
Change-Id: Ib07dd79452a56413c711394dd72aa37dbb4a70d7
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows to find the parent directory url using
url.adjusted(QUrl::RemoveFilename).
Change-Id: I1ca433ac67e4f93080de54a9b7ab2e538509ed04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt_ACE_do(".co.uk") was returning an empty string because of the
leading dot. Allow leading dots from topLevelDomain, but not from
other calls.
Change-Id: I757d9960708e205d30554cd2bbcf618c8624792b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling waitForNotified on an uninitialized notifier will print a
warning and return false. The autotest has been adjusted.
Change-Id: I85e18d6d0a8a5462e1a5d451613add941d89b5fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Need to store 17 decimal digits for binary64, IEEE 754 double formats.
Autotest is included. Test cases from TC39 test suite for ECMAScript.
Task-number: QTBUG-31926
Change-Id: I546398f21ea7ff5e40e89fc9de8703f628f55df9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Do not lower case file names to generate hash keys since
QString::toLower() converts some characters with context
which the Windows file system will not.
Task-number: QTBUG-31341
Change-Id: I285bfedef3c1ca9d59083229e61974dd378c72ae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Instead of calling different wait functions on different platforms,
we use QTRY_COMPARE to check the process state.
Change-Id: I6489cabce9e63f9c8b1036f3cccbf35b52df72e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
This reverts commit e3fa266623b08e837cb4ccc7fe59da243d03dd27
That commit applied a change at the wrong place in the code.
Change-Id: I21e3045a3af14ad2f90c5fe338815c35a2d27ae6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Leading and double dots are bad, but trailing dots are fine. The ASCII
part of a hostname is supposed to be LDH (letters, digits, hyphen) only,
but we accept '_' (underscore) as an exception too.
Change-Id: I79957ddec4da78a0e2357fe50c8687db03e1c99e
Reviewed-by: David Faure (KDE) <faure@kde.org>
qt_ACE_do(".co.uk") was returning an empty string because of the
leading dot. This has always caused issues in KDE code too, where ACE
normalization needs the dot removed, and re-added afterwards.
Change-Id: Id9fcea0333cf55c14d755a86d4bf33a50f194429
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The issue is already fixed in 5.0 but let's be nice and ensure the issue
won't be reintroduced later.
Task-number: QTBUG-30931
Change-Id: Ia6944acaf6e7217f8d0f1fa75d0e9977db11d892
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QDateTime.toString() is writing out milliseconds since change
15da0a5af2. Unfortunately this breaks
QDateTime::fromString() with Qt::TextDate which can't handle the new
format.
Fix by making QDateTime::fromString split up seconds and milliseconds
on a period, if any. Now
QDateTime dt = ...;
assert(QDateTime::fromString(dt.toString(), Qt::TextDate) == dt)
works again.
Change-Id: Ibfe9032e357ceaf894e33f3e33affe94f56dbf5c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
During a call to QDir::mkpath(), the same path could be created
by another process, in which case the OS mkdir will fail with EEXIST.
But the docs for mkpath() state that it's not an error if it
already exists, whereas for mkdir() it is an error. So
QFileSystemEngine::createDirectory should accept the EEXIST error
silently if it occurs while creating the sequence of parent directories
and the final leaf directory, but should fail if EEXIST happens when
it was called from QDir::mkdir(), which is when the createParents
parameter is false. We assume the operating system mkdir() and
CreateDirectory() are atomic, so there should be no race condition
in QDir::mkdir(). It's not necessary for mkpath() to call stat()
at each level, only to check whether an existing entry is a directory
or a file. Also added to the autotest to verify that if the
path is an existing file, creating a dir with the same name will
fail in either mkdir or mkpath.
Task-number: QTBUG-30046
Change-Id: I926352f10654fdf3b322c8685bb85ad8b8844874
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is a mismatch how QML and C++ converts QJsonValue. This patch
unifies conversions by adding QJsonValue support in QVariant::convert().
Change-Id: I8a1db3d77c517945ef48064b4b66ba03aa4f2fd0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
BlackBerry OS does not allow for explicitly controlling the locale through the
"LANG" environment variable. Locale is controlled by the underlying PPS
Service instead.
Change-Id: I22154e39f81a9467ad7fdb90a042396390398b1b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
In Qt 5, we declared that throwing from event handlers is undefined
behavior. So stop testing this.
We will try our best to capture and pass along std::bad_alloc, but even
that might not work, depending on compiler settings. In particular,
after the upgrade to MinGW/GCC 4.8 with DW2, this test stopped working.
Task-number: QTBUG-31615
Change-Id: Ibf5fb2ce0c48b983549096bf7aac434b6ed3ac2e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
qt_nameprep is tested by tst_qurlinternal. We just need to be sure that
QUrl handles them correctly.
Change-Id: Ic563004870d2cf2fa7a31ce49fff7280d5ffb5f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Edge case: a > that should have been >=. Without it, we never ran the
rest of the IDN nameprepping.
Change-Id: I2276d660de3a70d0c561bb18816820d9a0f47e77
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
RFC 3454 says about prohibited characters (section 2, "Preparation
Overview"):
3) Prohibit -- Check for any characters that are not allowed in the
output. If any are found, return an error. This is described in
section 5.
In other words, we mustn't simply strip the output of prohibited
characters. We must generate an error if they are present. We do that by
clearing the data.
We already had tests for prohibited output, but they were
indistinguishable from being stripped. So instead add some extra
characters so that we can tell whether the label was cleared.
Change-Id: I2d95217c27be5e2d54deed0036cb009e3b7f4886
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Because tests are usually run as root on some setups, it does not
make sense to test for the right permissions of a readonly file.
Change-Id: I484f88722d3a9ce7123edc0fb57acae528fa194e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In QML it is common to connect signals to slots that are implemented as
JavaScript functions. QML used to maintain separate data structures that
mirrored the QObject connection list and kept references to the JavaScript
objects necessary to perform the call on signal activation.
The recent addition of functor based QObject::connect makes it possible
to store this information in QSlotObjectBase sub-class instead, which
eliminates any extra bookkeeping.
This patch adds internal connect and disconnect overloads to QObjectPrivate
that allow for connecting QObject *sender, int signalIndex to a given
QSlotObjectBase and similar for disconnect.
Change-Id: I90f43d13eb95bd884d752484cf4faacc446f4d6a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Section 4.2.2.4 of ISO 8601 allows for decimal fraction representations
of dates and times. Currently, when calling
QDateTime::toString(Qt::TextDate) or QDateTime::toString(Qt::ISODate),
the milliseconds will be omitted. However,
QDateTime::fromString(str, Qt::TextDate) and
QDateTime::fromString(str, Qt::ISODate) already support decimal
fraction representations, so this patch just adds this support to
QTime::toString, and hence QDateTime::toString().
Task-number: QTBUG-30250
Change-Id: If58e4b3d3105322c51d11a76b832e5e634d8991f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds a way to enable operator<, operator== and operator<<
into QDebug for QVariants with custom types.
Change-Id: I3d12d891bd7252ad2b8f1de69bced354800a1f29
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Latin1 strings are usually stored as 8 bit data in the json binary
format. But that data structure has a size limitation of 16bit, so
we need to fall back to storing the string as 16 bit data if it is
too long.
Task-number: QTBUG-30946
Change-Id: I0069b1367030b0b2f819fd1f04e34c9e2534a2a3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Return the codec if one was found by QTextCodec::codecForUtfText,
instead of returning the default (UTF-8).
Task-number: QTBUG-31293
Change-Id: I95e3260376c00537006b7fbfdc3df5850e1ba657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The optimisation done in cbaf52b099 for Qt
5.0 got the order wrong of the comparison. The queue must be sorted in
decreasing priority order. But since higher numbers mean higher
priority, that means the queue must be sorted in decreasing priority
number order.
Task-number: QTBUG-29163
Change-Id: Iaf3424b9bb445bf5c71518927f37253cead454f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
In JSON, any number is stored in double. We need to make sure we
keep the maximum possible number precision for integer number. In
IEEE 754 double format, the significand precision is 53 bits(52
explicityly stored).
Autotest is included. qint64 and double work fine.
Task-number: QTBUG-28467
Change-Id: I7f857671c50e4334e9329c778f9b4f090f490540
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Although it is possible to construct those containers, they are not
usable, as qHash(float) and qHash(double) are ambiguous.
Also don't use CustomMovable as a container key.
It is not equality or lessthan comparable.
Change-Id: I8c7ee068250e2e2b3427769153e3017721c13c50
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fix connection to pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
The current code only use the QMetaObject of the type coming from the
function type to look up the signal id. But if the signal was casted
to a pointer to member function of a derived type, then we also need to
look in the base classes
Change-Id: Ib98fc38f63942946acb34d9f83c100991d58e4e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, I managed to break the guarantee that a deserialised local
datetime is the same time of day (potentially different UTC time),
regardless of which timezone it was serialised in. This happened after
I fixed QTBUG-4057 with If650e7960dca7b6ab44b8233410a6369c41df73a,
which serialised datetimes as UTC.
This patch reverts QDateTime serialisation to pre-Qt 5 behaviour to
restore the guarantee and consequently re-opens QTBUG-4057.
Change-Id: Iea877f7ed886f530b928067789b53534e89fe8cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A new set of classes is introduced for iterating over the contents
of a container within a QVariant without knowing the exact type of
the container, but with the guarantee that the element type within
the container is a metatype.
The implementation of the iterable interface uses
the stl-compatible container API so that we can also iterate over stl
containers, or any other container which also conforms to stl norms.
This enables the functionality in the bug report.
Task-number: QTBUG-23566
Change-Id: I92a2f3458516de201b8f0e470982c4d030e8ac8b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patchs allows the user to convert defined QMetaType types like
MyType to be converted by using e.g. QVariant::toString(), mapping to
MyType::toString(). Also all the other QVariant::toXYZ() methods are
supported so far.
The patch adds static methods QMetaType::registerConverter supporting:
- implicit convertion
- conversion using member method of source type
- conversion using unary functor
Change-Id: I4f1db83d9c78bcc9df5c42f82f95cce0480cdcc3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If a process dies before all output is read into the internal buffer
of QProcess, we might lose data. Therefore we must drain the output
pipes like we already do in the synchronous wait functions.
Task-number: QTBUG-30843
Change-Id: I8bbc5265275c9ebd33218ba600267ae87d93ed61
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Test locale-based formatting of numbers when we pass field width, base
and fill characters. This now tests the fact that we replace a '0' for
the locale's zero character.
Change-Id: Ib872a592fd9a754e3ef11495a9497a6947056631
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Task-number: QTBUG-30346
Change-Id: I3d6dbe1e88bb5e2748eadabb2663f30be16f8d18
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Windows Embedded Compact does not have drive letters like desktop
Windows => do not try to build drive letter related test code for WEC7.
Change-Id: I2c3659220a001510c0555e2dd773b4dd68e9c2cc
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We don't need to keep an internal QBuffer position, we can just use the
one from QIODevice::pos(). It will keep track of goings ahead and
backwards for us, plus it will make the default bytesAvailable() work
out-of-the-box too.
This error was reported on IRC.
Change-Id: I8559e8ee56edaa01ca8732c1f1012082ebe3a3f2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Previously only 32bit signed integers were ensured to be supported by
JsonValue type via API but it is expected that a larger integer range
should be supported by a JSON implementation.
This commit brings the Qt implementation into parity with NodeJS
JSON.stringify() in respect of the JavaScript Number type.
Change-Id: If91153cb3b13ecc14c50da97055b35ce42f341e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously Qt JSON writer would only emit 6 digits of precision as this
is the default with the formatter.
However with testing against NodeJS JSON.stringify() this behavior is
inconsistent with the defacto standard JSON implementation and conveys
a loss of precision.
Change-Id: Ie1845a6e0ee0b4c05f63ec0062f372e891855f0b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
My interpretation of RFC4627, Section 2.4 "Numbers" of:
Numeric values that cannot be represented as sequences of digits
(such as Infinity and NaN) are not permitted.
I have also verified this matter with NodeJS JSON.stringify() that
emitting a null is consistent behavior with a JSON implementation
written in JavaScript.
Previously Qt would emit:
{
plusInfinity: inf,
minusInfinity: -inf,
notANumber: nan
}
Which maybe turned into a string values of "inf", "-inf", "nan" by
the receiving parser. Now it returns the JSON null value just like
NodeJS JSON.stringify().
Change-Id: I9f9c17f12b2606280806c47a9d90465c4ba5f786
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Auto tests using CET expect there to be no Daylight Time before 1980,
but Windows does apply Daylight Time. Fix expected test results to
match.
Task-number: QTBUG-30420
Change-Id: I7080598fa0a20c1cd5680782606ab983e714e546
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
