+ QChar::LastValidCodePoint enum value that supercede the UNICODE_LAST_CODEPOINT macro
replace uses of hardcoded values with the new API; remove leftovers
Change-Id: I1395c9840b85fcb6b08e241b131794a98773c952
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
inline all non-static members to a static ones (declared with QT_FASTCALL),
ushort converts automatically to uint and the conversion cost is minimal.
Task-Number: QTBUG-13052
Change-Id: I189a6f205736766adcd3de2d61cee71f30cc64f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
texts for the textKeys are stored each in a separate COM(ment) section
so that the maximum text's size is almost 65KB
Task-number: QTBUG-10568
Task-number: QTBUG-111
Change-Id: I7d693741e10e5d78d497cb0af448160077350bb2
Reviewed-by: aavit <qt_aavit@ovi.com>
When qt_ntfs_permission_lookup is used, QFile::permissions failed
for files with long filenames.
Also created a test case for this API, which revealed another bug.
Task-number: QTBUG-25629
Change-Id: I73b7676a9d059c0e782b3f701b2e6bbc92f671ed
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
This can be enabled again now. The sender transfer test is still not
re-enabled since the test would take to long to run if sending
enough data to overwhelm the reciever's kernel buffers.
Change-Id: I4056fdca53ec8ebbcc53dfdc814d8bfdbc73f7ce
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
When a file is specified on a path that includes a drive letter
followed by a colon but no slash then it didn't always account
for the fact that this refers to the current path on that drive.
This fixes the problems in completeBaseName(), baseName() and
path(). Tests are also added for these three cases and some
others too.
Task-number: QTBUG-25353
Change-Id: I47a197c6af066f532442ad269be57597ec61303a
Reviewed-by: Irfan Omair <irfan.omair@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Initially we didn't do this because someone could accidentally create
another target of a conflicting name, and used a variable to store whether we
have created the target already or not.
That wasn't adequeate to deal with finding the package in a scope
like a function, so we used a directory property. However, the directory
property is not valid in the same scopes as the defined target. For
example, finding a Qt module in both a directory and a subdirectory causes
a conflict.
As it is already unlikely that a target would be accidentally created with
a name like Qt5::Core, we should simply use the IF(TARGET) form.
Change-Id: If64f25d45f51edcd1edb0d4bfb5ed3bb2479bd27
Reviewed-by: David Faure <faure@kde.org>
On some systems prior to this change the code
would not build with the following error reported
by gcc:
error: integer constant is too large for 'long' type
Change-Id: I778bce9a72ccf3a41cdf17883d734082ed3fb4b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Name is about mimetype names, while FileName is about, well, file names.
Task-number: QTBUG-25748
Change-Id: I34a9ac1a5fc06dc3e3855365e19c4dc7a1aa2671
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
This completes the transition from connectNotify(const char *) and
disconnectNotify(const char *) to the new QMetaMethod-based
functions.
Removed the old connectNotify autotests and renamed the
connectNotifyMethodXXX autotests to connectNotify, since there is
no longer any ambiguity about which overload is being tested.
Change-Id: Icf108a80177155f21bb73c165fb8ab5d4e997bc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The socket engines already implemented this, but it is a good idea
to test it explicitly.
Task-number: QTBUG-25634
Change-Id: Ife3fe09b0119ed435e4055523c553847739a09fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QUrl::fromLocalFile("/foo") doesn't set Host, but QUrl("file:///foo")
does (to remember that it saw a Host section, even if empty, which is
useful for urls like "remote://"). So ignore the Host flag in operator==.
Change-Id: I4322b4a75420c4e42766c0d65c1b121f28028a76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix operator== and operator< so that a URL with an empty fragment
or query, is not treated as equal to a URL without any fragment or query.
This restores the Qt4 behavior on this particular issue.
Change-Id: Ie989f37353fb13c791b1d558d638d2e8a5b5d1b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This ensures that we only find Qt5 modules from the same directory
as modules we have already found, not from multiple different
directories which may be incompatible.
Change-Id: I7ad1d81ec41bba2e543130740041338ba44a6c3b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Null bytearray means no query, and QString::fromLatin1(QByteArray())
doesn't give a null string, but an empty string.
Same for setEncodedFragment(QByteArray()).
Change-Id: I992e9253e35941d66886456872ea06aa2ae92450
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the scope ID is not set, Mac and Windows will not transmit
packets to link local addresses. This patch implements setting
the scope in the native socket engines and adds a test case.
(it was partially implemented already, though UDP specific code
paths were missed in the unix engine)
Task-number: QTBUG-25634
Change-Id: I23300bdc9856e38458078e913daaa59cd05a74b5
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
If the next active window is already known at the time a focus
out is received, pass it to QWindowSystemInterface.
Fixes a test and Qt Creator's locator bar.
Task-number: QTBUG-24186
Task-number: QTCREATORBUG-1
Change-Id: I0aed4c386c08ed182555c95640e1637c5b67f5ce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
After we have change the policy we should set the readbuffersize to
unlimited again, so that we try to download all data.
Change-Id: I1b9bdb6c2e5f408c920f6e6d7e85a39e4c18316b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This changes all the containers that uses QtPrivate::RefCount
(QMap already had one), and QVariant
In Qt 4.8, it was pointless to have the move constructor because we did
not have quick way to re-initialize a null container. (shared_null still
needed to be refcounted)
But now that we have RefCount, and that the shared_null do not have
reference count, we can implement a fast move constructor that do not generate
code to increment the reference count.
Change-Id: I2bc3c6ae96983f08aa7b1c7cb98d44a89255160b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This cmake function handles all of the necessary logic for using the
include directories of Qt modules, linking to Qt modules, adding
the required definitions, and most importantly, adding the position
independent flags required on UNIX systems to use Qt by default.
The function relies on functionality available in CMake 2.8.8, so it
is only available if that version of CMake or greater is used.
Change-Id: Ibe698e06819129479348c240844264c41553b5fb
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
A leading byte order mark is valid in utf-8 and we should
parse documents starting with those correctly.
Change-Id: Id85398ff6e05b93ceefbaf4a6de5571d5e61ca13
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
there are several reasons to do this:
* text breaking is not a shaper's job;
* since the text breaking rules are bound to a specific Unicode version,
updating Qt's internal unicode data would require updating the data in HB as well;
* makes porting to HurfBuzz-NG some easier
Change-Id: I0bbf8e8a343bc074696f4ddf2ae4e7fa32a61629
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This was crashing because the ':' was found past the end of the
username, causing the recoder to run from position 22 to 11, via the
long way around the memory.
Change-Id: Ic1ae596f34f7db857fb4210294974fb5a6adf691
Reviewed-by: Alexis Menard <alexis.menard@openbossa.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Because SSL2 is disabled in ubuntu's openssl binaries, the SSL
connection is expected to succeed rather than fail when the server
side is using SSL3/TLS1.0.
Used the OPENSSL_NO_SSL2 macro to decide this.
Change-Id: I2c35aa5aa0c9432ae78000c81f70086bdc31843d
Reviewed-by: Richard J. Moore <rich@kde.org>
If the url we pass as parameter already have percentage encoded data,
we don't want to decode it and call fromPercentEncoding. The test
coverage is not complete for qdataurl.cpp file but it is better than
previously and it will also protect us from future regressions.
Change-Id: I79f709f44bed1b7f274a3de639c7e291fa91a193
Reviewed-by: Thiago Macieira
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Rename posFromMove to posIncludesFrame in Widgets and
make the handling more fine-grained; try to clean it up
as soon as the frame margins are known
in QWidgetPrivate::fixPosIncludesFrame().
- Implement QWidgetPrivate::updateFrameStrut().
- Windows: Handle posIncludesFrame in window creation,
notify changed geometry after setting window flags.
- XCB: Do not change the window gravity in propagateSizeHint()
as this causes the window to jump around. Determine
the gravity in window creation, leave it constant and
fix the geometry when setting instead.
- Store the normal geometry when maximize/fullscreen
state change events are received.
- Remove xfails from fixed tests
Task-number: QTBUG-25331
Task-number: QTBUG-24905
Task-number: QTBUG-24294
Change-Id: I89c7229d86aaf88f02247d63915da7905e4a27ea
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
19d160b72b broke it temporarily, and this wasn't detected by
tst_headersclean, because it sets QT_NO_CAST_FROM_ASCII too,
which disabled the faulty code.
So this adds a new unittest for QT_NO_CAST_FROM_BYTEARRAY alone.
Change-Id: Iaf7a36a1378e77188bcc636e5dc9a1f9b84f70a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Only call qdoc for projects which sets the QMAKE_DOCS variable to
point to a qdocconf file.
Exclude examples/ and tests/ from the qdoc run, by adding
no_docs_target
to CONFIG for those projects.
Change-Id: Ic856c8f19db59309302d0602b3e99735609e525a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
C++ distinguish between "char", "signed char" and
"unsigned char", they are three independent types.
Fix QVariant behavior on ARM. On ARM "char" may mean
"unsigned char", but we depends on the sign during
a numerical conversions.
Change-Id: I610ce3fb88ed5964b67f3ae442d264fe16b2d261
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The implicit cast to QJsonValue was being ignored probably because the
compiler was generating a default QJsonValueRef assignment operator
Change-Id: I3a041595497308868dd7e4aab71027ce21bf8f0b
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This doesn't compile with a typical cross-compilation setup, which
generally won't include cups headers. The commit should have been
rejected, but wasn't, due to a bug in the Qt Project CI.
Since it now causes all other modules depending on qtbase to fail their
CI, it must be reverted to minimize disruption while the commit can be
amended and/or the test toolchain updated to include cups headers.
This reverts commit 80f7a38890.
Change-Id: I315ae275b37de358a74af28ab7bd691c9849acba
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
CUPS is the only supported print system on UNIX, LPR/PS support has
already been dropped but some LPR specific code still remains.
* Move qt_getCupsPrinterPaperSizes from qprinterinfo_unix to
QCUPSSupport
* Remove qprinterinfo_unix as no longer used
* Remove LPR related code from QPdfPrintEngine
* Remove all QT_NO_LPR uses
* Remove most QT_NO_CUPS uses, use QT_NO_PRINTER where necessary
Some QT_NO_CUPS uses remain in QPdfPrintEngine, these will be removed
in a following change implementing a CUPS plugin.
Change-Id: I439b6fad9cf88c3d24aa48e49475f49ad310dbad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The overload of this method was renamed
in b64426248d but this one was not.
Change-Id: I60a6ddf0fcf9deea31ccf51e7b0db16c66023356
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This also tests by consequence that the behaviour of QByteArrays
containing NULs is consistent. Right now, that means the QByteArray
processing stops at the NUL, which is the same behaviour as if a
pointer to the byte array's data were used. (it's what happens if
there's no QByteArray overload and the const char* one is called)
Change-Id: If56a822f95866e8cb5b153d07b48198bb83fb386
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This commit completes the previous commit so that both QString and
QStringBuilder now operate on UTF-8 input.
A small fix was required in QStringBuilder: an if clause isn't enough
to separate the two append versions. Since there are no QString
functions that append to char*, if we're converting to a QByteArray,
we need to go through a QString first in a separate function.
Change-Id: Ic503340c5d0c32d420c90c91cc2e0fc1ae9230f3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I052a3412a568ad639f2bf169b4491b56dddff1c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The file has been UTF-8 encoded for years, which means that the line:
QString longerBLOB( "abcdefghijklmnopqrstuvxyz¿äëïöü¡ " );
Loaded a mojibake into QString. Then, this data was stored as a blob
in the database by calling longerBLOB.toLatin1() (a QByteArray), and
reloaded for check using toString().
Once the QString default codec changes to UTF-8, the mojibake would
get fixed, and the test would fail. Make sure it doesn't happen.
Change-Id: If12d6124c973e4a1c1b7978d90fffb9aa5545c66
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Icb3ab0e1f4f3173563f3de36115b5457cf1ba856
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Use "--headers=file" where the file contains the raw headers to send.
This is useful for replaying requests from log files.
Change-Id: I3bbe582d96fc9797f692a0d5772e8164f8265ce0
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
In Qt 4, we loaded resources through the QTextEdit or
QTextControl if they were the parent of the document.
Modularization for Qt 5 broke this, as we can't cast
the parent to a QTextEdit anymore.
The fix is to make the loadResource() methods in QTextControl
and QTextEdit invokable and discover and invoke them at
runtime on the parent object.
Task-number: QTBUG-25116
Change-Id: Iba04bc16849b0c5ddcd275f12d1a386a8fe591bf
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Make it possible to shadow-build using Qt 4.8 for comparison.
Change-Id: I1a18b7f1d03b11f0420aab14455e2c53d1afd6ba
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
> http://www.unicode.org/versions/Unicode5.2.0/
D. Character Additions:
There are three new characters in the newly-encoded Kaithi script that will
require changes in implementations which make hard-coded assumptions about
composition during normalization. Most new characters added to the standard
with decompositions cannot be generated by the operations toNFC() or toNFKC),
but these three can. Implementers should check their code carefully
to ensure that it handles these three characters correctly.
U+1109A KAITHI LETTER DDDHA
U+1109C KAITHI LETTER RHA
U+110AB KAITHI LETTER VA
UCD 6.1 adds two more of them:
U+1112E CHAKMA VOWEL SIGN O
U+1112F CHAKMA VOWEL SIGN AU
Change-Id: I781a26848078d8b83a182b0fd4e681be2a6d9a27
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Since it deals with paths, let's use the proper path-handling
functions.
Change-Id: I896d2c472dfd675e9ff247657447178702f178be
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Show that nothing is changed either way, regardless of the encoding
flags used.
Change-Id: I31fba5f87eae777d4b708ab789b32169004bcbcc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It should only strip one slash (as the name indicates), and not if the
path is just "/".
Change-Id: I133a81977241de77a49d1d1559143d30e0bd52f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test is passing for Windows now in CI due to recent fixes, so
remove the insignification.
Change-Id: Ib74aea443c4a66c9bf743d88e15d9f27f9ac2fe4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ib1eaf42679ab5db4005192c3d00ba79e43edfcca
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I6ea46cd6dfed75afc253fa2b4e3f1789bdad1d4e
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This way, QWinEventNotifier will work on all Windows systems, not just
with the default event dispatcher. Other dispatchers (other than
QWin32EventDispatcher) are permitted, so the class should not abort just
because of that.
If a dispatcher really doesn't want to implement this, they need to
implement the virtuals to do nothing, possibly print a warning.
Change-Id: I2c132bcde95b9d5941c8906a0fcd2ad964087772
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Although we created an enum for pause modes to make 5.x binary
compatible with 5.0, the enum value is not well named.
In 5.1, we propose to add PauseOnProxyAuthentication to the enum.
PauseOnNotify is not clear what it means, while PauseOnSslErrors is.
Any new notification in a minor release would need a new enum value
otherwise applications would get pauses they did not expect.
Task-number: QTBUG-19032
Change-Id: I4dbb7467663b37ca7f0551d24a31bc013968bedc
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This reverts commit df43b9a06a.
Using the same depends information as QMake provides adds a lot of
convenience for users, and is mostly 'correct' from a CMake
point of view anyway.
Change-Id: I8f2a2f74a687c25a0dedcc491ef72ddb5b136090
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If we're not going to verify the peer, or we know in advance that
windows won't have a CA root then don't ask it to verify the
certificate chain.
The test case started failing in CI when the windows cert fetcher
was integrated due to timing change. I've relaxed the timing
requirement of the test to avoid it being unstable.
Task-number: QTBUG-24827
Change-Id: I694f193f7d96962667f00aa01b9483b326e3e054
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
It seems that this case is failing on CI because OpenGL version,
so skip if OpenGL is not recent enough.
Task-number: QTBUG-24192
Change-Id: I543e7a092e5c107ee57cd9dce7dc5c890a0315cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I7e7202e6a1a84699ae0d43e4b2e7ee9ec87ed0b6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The mentioned records for råkat.se cannot be resolved.
Note these were marked with a FIXME in the first place.
Change-Id: I4ea3bbb0aec8ca1b3487c44656b48a8715228886
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
I wrote nonsense in that commit. The older methods that take a timeout
all take milliseconds, and the comments in the unit test really meant
milliseconds, not seconds. 1s is not shorter than 100ms....
Change-Id: Ic18899bb0462d89575dc5a9a311478adc4dea1cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is much more performant than calling QObject::receivers(const char*)
Can be used instead of connectNotify in some cases.
Change-Id: I19e0933f678f171f515d9a0f69f0ad4fb7d894b4
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reimplementations of connectNotify() and disconnectNotify() can
assume that the signal argument is in normalized form, but after the
introduction of the Qt5 meta-object format, it could happen that it's
not.
The problem is that the internal QArgumentType class, which attempts
to resolve a typename to a type id, was calling QMetaType::type().
QMetaType::type() falls back to trying the normalized form of the
typename if the original argument can't be resolved as a type (this
behavior isn't documented, but that's how it works). This means that
e.g. QMetaType::type("const QString &") returns QMetaType::QString.
Since QMetaObjectPrivate::indexOfMethodRelative() (more specifically,
the methodMatch() helper function) prefers to compare type ids
over typenames (since the type ids are stored directly in the meta-
object data for built-in types), the method lookup would *succeed*
for signatures with non-normalized built-in typenames as parameters.
QObject::connect() would then think that it did not have to
normalize the signature (see "// check for normalized signatures").
The consequence was that the original, non-normalized form got
passed to connectNotify().
This commit introduces an internal typename-to-type function that
is the same as QMetaType::type(), except it doesn't try to normalize
the name. This way, the only place where normalization can occur in
the signature-to-meta-method processing is through the calls to
QMetaObject::normalizedSignature() in QObject::connect() itself.
The implication is that there are now cases where the method
signature will be decoded and processed twice, where processing it
once was sufficient before. On the other hand, it is consistent with
the pre-Qt5-meta-object behavior, where we predict that the
signature is already normalized, and only perform (comparatively
costly) normalization if the initial lookup fails.
Change-Id: Ie6b60f60b0f9a57ebd378d980329dac62d57bbd9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
static_metacall was never set on the metaobject written by
QMetaObjectBuilder::fromRelocatableData, sometimes causing a crash. It
should be initialized to 0.
Change-Id: I79373d895e131f0cc2ff1af6d2177a0c1a282be7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The Qt buildsystem is creating the config files for it even
when it is not building QtDBus, so Qt5DBus_FOUND = True.
Re-enable the CI testing on mac with this change.
Task-number: QTBUG-25522
Change-Id: I5d2690d17fde6c5aabcbdd3e2eef9f0846edd97d
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest fails to build after the introduction of the
QMetaMethod-based connect/disconnectNotify() functions; we are
intentionally keeping the old const char * versions (overloads) for
a limited time, to avoid disrupting other modules.
This commit will be reverted as soon as the compatibility overloads
have been removed.
Change-Id: I9b5a40b51ffa3bfa3d185410389678c262ca7b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This API will fully replace the const char *-based connectNotify()
and disconnectNotify() in Qt5; the old functions will be REMOVED
before Qt 5.0 final.
The new implementation fixes the long-standing issue of
connectNotify() not being called when using the (internal)
index-based QMetaObject::connect() (e.g., from QML).
As with the old API, there are still two "unintuitive" behaviors
concerning disconnectNotify():
- disconnectNotify() is not called when the signal is disconnected
using the QObject::disconnect(QMetaObject::Connection) overload.
- disconnectNotify() is not called when a receiver is destroyed
(i.e., when a connection is implicitly removed).
The old versions of connectNotify() and disconnectNotify() are kept
for now, and they are still called. They will be removed once known
existing reimplementations (e.g., QtNetwork, QtDBus) have been
ported to the new API.
Change-Id: I8b4f007f3c6d89199c1ba04a3e23c8ca314e0896
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The test is passing in CI for both Mac and Windows, so removed the
insignification from it.
Task-number: QTBUG-24885
Change-Id: Ida39d98b72e49fc82358d016b8de725bbfc5d6de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has been passing consistently since the previous crash was
skipped in commit 6dbd00b120.
Task-number: QTBUG-22792
Change-Id: I41ac001a3b9e16cde4d674dc9f34ab2dffb848cd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has been passing consistently since it started running in CI.
Task-number: QTBUG-24295
Change-Id: If2a163607ae72cae9e28619dd5de1b333aea4ed9
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These tests have been passing consistently since they started running
on Windows in CI.
Change-Id: I4505497afc477a7f4fbda0acc29987d0d0cf220a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test has been passing consistently since starting to run in CI.
Task-number: QTBUG-25445
Change-Id: Id024921b18ea4ef94ad2f47d9db2ccda3212eaaa
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has a single stable failure on both of these platforms. Mark
the failure with QEXPECT_FAIL (that was already the case on Ubuntu
11.10) and re-enable the test.
Note also the elimination of duplicate bug numbers.
Task-number: QTBUG-24234
Change-Id: Ica11e7d1f3cd9487647127984fef7c75e0e764fe
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Change-Id: Ifdd89397f88b090a6b43d40636dbeac029faaed8
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I58efa1f295dbc652b1882937ca27ea52d9f4a923
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Turns out that we've had some old unit tests commented out that did not
compile. QString does not have a std::string constructor nor overloads
to many other methods. And std::string does not cast to char* on its
own. So these tests need to be removed.
Change-Id: I22df66fc3ccc68bc2840f2d83747234418e480f5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
And use QString::toUtf8() to recover the byte array original.
Change-Id: Ic94de12e7ac67479e85a64a86f8467428b4d22ba
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove all non-UTF-8 sequences from source code in Qt.
Change-Id: I46d9cb23ef2199894896f171d553b3144822f36c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test was flawed, as it didn't process queued events before checking
for received event counts, which caused window minimum size enforcement
triggered resizes to be missed. Added event processing steps before
critical checks and also increased the size of the windows so that
event counts are predictable also on Windows.
Note that this might also fix the issues this test has on Mac, but I
can't test that.
Task-number: QTBUG-24904
Change-Id: I01a4bd1ddabcf3650a8abff67b03c75b9c40a626
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Given a member function that's a signal, returns the corresponding
QMetaMethod. Inspired by the implementation of the template-based
QObject::connect().
The primary use case for this function is to have an effective and
exact (not subject to shadowing) way of checking whether a known
signal was connected to in reimplementations of
QObject::connectNotify(QMetaMethod), avoiding string comparisons.
Example:
void MyObject::connectNotify(const QMetaMethod &signal)
{
if (signal == QMetaMethod::fromSignal(&MyObject::mySignal)) {
// Someone connected to mySignal ...
}
}
Change-Id: I5e4de434275fe543c004d569dcaa9ceda3442f03
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Instead of allocating and reading the entire image and then scaling it
down, this code reads only one line at a time and scales it on the
fly.
Change-Id: I61fde307146c11dcd90ca617cc2e7f85dd3b66c4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This autotest passes when run alone, but sometimes fails when run
concurrently with other tests.
Change-Id: I327de7f4a9f8af385351e4c6b09a57311efd6eb6
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
QFontDialog and QColorDialog were ignoring the DontUseNativeDialog. This
lead to a native (Cocoa) dialog created all the time.
Fix the testcase for QFontDialog. It needs the DontUseNativeDialog flag
set.
Task-number: QTBUG-24321
Change-Id: I159c1ad057bac38226f1e01a56b15f142650bfd8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
cmake was installed on CI macs _after_ this test was added, causing the
test to block unrelated changes. Temporarily disable it as previously
agreed with Stephen Kelly.
Change-Id: I079c0016a5e4a9a03ee1a0bae9a2e836c6b985d6
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
It no longer requires hardcoded configuration, and it passes on
linux, mac 10.6 and windows desktops
Change-Id: Ibaa63520dade58ce13c23cf2aba3ddbc5be1c472
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Also remove some code which has been unused since it was introduced in
32182d107fa75e5619ecc91a81f50626f429ebe1
Task-number: QTBUG-25140
Change-Id: Ic7053d68d8200f845c1ae330342d27af7275e057
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@digia.com>
Reviewed-by: David Faure <faure@kde.org>
Known failures in this test are now handled by QEXPECT_FAIL.
Task-number: QTBUG-24796
Change-Id: I12ba57370cf3df1a85a108fbbcdc9db2222491c1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Unlike path(), toLocalFile() isn't reporting a URL component, so it
should decode the percent-encoded characters fully. This extra
decoding pass is meant to catch %00 to %1F, %7F and %25 (the percent
sign itself).
It also catches %80 to %FF, which aren't decoded because they don't
form UTF-8 sequences. That means QUrl::toLocalFile() has undefined
behaviour if the path contained non-UTF8 sequences.
Task-number: QTBUG-25459
Change-Id: Iab5a0ba6afcfc4510e297984f2ffc208cedd752b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Can't use style name with Windows native font engine, so do the
comparison using style in case multipleRawFontsFromData().
Also XFAILed the advances() case when using Freetype font engine in
Windows, as some of the advances returned are one pixel wider than
expected.
Task-number: QTBUG-24197
Change-Id: Ib5fecd83a93908e57a4c82ffb5495a92474ce45a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QMetaObjectExtraData was added when support for QMetaObject::newInstance
was added. One needed a place to put the pointer to static_metacall in
the QMetaObject.
But as we break binary compatibility, one can change the size of
QMetaObject, and put everything back inside QMetaObject's own structure.
Meaning it is not required anymore to have one QMetaObjectExtraData
instance per QMetaObject anymore.
Change-Id: If0b8f586cbaf633eed10045adee3ba3366826c86
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This is done in preparation of introducing the
QObject::connectNotify(QMetaMethod) function. Together with the
forthcoming QMetaMethod::fromSignal() function, which returns the
QMetaMethod corresponding to a Qt/C++ signal (member function), the
comparison operators provide an effective way of checking which
signal was connected to.
Change-Id: I2de48628c4884a7174fb8574895f272cb3fe5634
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The buildkey support was removed in 7493ee1c44. This commit removed
PI_BuildKey and most of the usages from the code.
Change-Id: I971d68cd4377c358381983c1edcb98360936b698
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This test hangs in CI, but so far I've been unable to reproduce the
problem. Disable the test for now so that this test does not block
changes that bring in needed functionality.
Task-number: QTBUG-25496
Change-Id: I81faa574b6d7bcab2e32becc2af0f71006c7dd9c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Instead of trying to return whether the URL is relative to something
undefined, let's instead follow what the documentation was saying all
along and what the RFC says about "Relative References".
Change-Id: I32722321a6b36c6e3480669ad769390e4c6f7d1c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously, the CI system has not been testing on Windows with the
-developer-build configure flag. Mark known failures for this
configuration so that tests can be run in enforcing mode.
Change-Id: I5fbbbe09a7b400d626107c66dcbd5c5469a45b20
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUrl::path() already decodes almost everything, but let's pass the
formatting flag to be sure.
Note: decoding of control characters from U+0001 to U+001F is not
implemented. Non-UTF8 sequences are also not representable.
Change-Id: I9a0ae2282ec3d48cc0e70e5b2d3824fb120709ed
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: If119e06221ca99e57c5ad1a1d4cc6468e9f68c7b
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
It's perfectly valid to have a path of /c:/a.txt on Unix, so don't
strip the leading slash unless we're on Windows.
Task-number: QTBUG-20322
Change-Id: I721bd0a65b41048bc735d4eaa0d536174164fe64
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since this test began to run again on Mac, it has been passing
consistently.
Task-number: QTBUG-22748
Change-Id: Ia81cf60b11d45fb331b5eca5d13df00556c18e07
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Declarative used to have some issues when the MouseArea event handlers
spinned the event loop: subsequent mouse events were all lost. Let's
add an autotest also for QGuiApplication to make sure the same problem
won't occur there.
Change-Id: If5c3b4f58dad609efb302d2ca932493680ffdf13
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It's not enough to check for UNIX because Qt may have been configured
without dbus, or we could be running on APPLE (on which DBus is not
commonly installed).
Change-Id: Ic57200dad42c0c12b292d1066f799c827294fe9a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add qSetMessagePattern() to configure the default
message pattern. This one can still be overwritten by setting the
QT_MESSAGE_PATTERN environment variable.
Without this method, there's actually no way to change the
default output programatically. Since QT_MESSAGE_PATTERN is
evaluated when the first message arrives, setting it via e.g. qputenv
might have no effect/be too late.
Change-Id: I115e0c30606f128fdbf5c169a951ffa2a6a48517
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test had two stable failures, caused by including code not meant
for Windows.
Task-number: QTBUG-25298
Change-Id: I43d9d62ecf5a3c6eec240fafbc43a625c00f45fa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has only stable failures. Mark those failures with
QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-25296
Change-Id: I5615700ec8119a827c30e43ae651a684e78170fe
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Specify main.cpp with full path to avoid obscure link
errors (grabbing main.cpp from windowflags)
- Set proper flags on the test window.
Change-Id: I9bbaf9cb5c7e210f53a51b58bd48a827d6104fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test only has stable failures. Mark those with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23674
Change-Id: I0e6cfe4f1992410bbc27b266f7bdafa14451aff7
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The test has one stable failure. Mark it with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23681
Change-Id: Iade17cbbd1570863bb628572d8da52ec9c0f62ba
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test function recently became unstable in parallel with the change
to re-enable the test. Skip the unstable function until it can be
fixed.
Change-Id: I0fb962aa3294a0c9b799acee52ab1fb1cd1c6924
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Up until now, the macros would return an internal type that contained
the pointer to the data. This breaks code that tried to use the macros
with operators, like QStringBuilder but also when writing:
QStringList() << QStringLiteral("a") << QStringLiteral("b");
This change seems to work fine now and I can also verify that this
works:
const auto str = QStringLiteral("Hello");
Even though it creates a QString, which is non-POD and non-constexpr.
Change-Id: Iaf82af9bea4245513a1128ea54f9d2d3d785fb09
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This test has only stable failures on Mac. Mark those failures with
QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-25298
Change-Id: I1c768226dfeb9307386e8853091baa68936bed29
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Previously the method attempted to reset only as a last resort.
Now reset() is deprecated and resetting must happen between emitting
modelAboutToBeReset() and modelReset(). Since this suffices in all
cases to notify views that they must reinterrogate the model, it is no
longer necessary to signal explicitly row removals and insertions
within the scope of the reset.
Additionally, fetchMore() is now called within the scope of the reset
so insert signals do not have to be emitted here either.
This improved handling of resetting in QSqlQueryModel also allows the
cache in QSqlTableModel to be cleared directly at select().
This change may actually allow views to operate more efficiently since
they no longer have to react to separate row removal and insert
signals. Views can avoid pointless deallocation and reallocation
by considering row count only after the reset is finished. The cost is
that the columns and horizontal headers must be considered in the view
at each setQuery() call. In any case, it is not clear that trying to
be smart about this in the model justifies additional complexity.
Tests had to be adjusted where they expected explicit row removal
and insert signals.
Change-Id: I4f7eac1419824361d7d9bdcc6a87092b33e80d7a
Task-Id: QTBUG-25419
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
This will allow the CI system to run the tests. The tests are only
run if cmake is found.
Change-Id: Ie73a56114c151871160bafcbf0b90b2d54620855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Windows, the test had a stable failure and an XPASS related to an
already closed bug report. On Mac, the test had one stable failure, on
the same statement that had the XPASS on Windows. On Ubuntu, the test
has been passing consistently.
Mark the stable failures with QEXPECT_FAIL, remove the QEXPECT_FAIL that
causes the XPASS, and remove the insignificant_test markers to re-enable
the test.
Task-number: QTBUG-24296
Change-Id: I05dd16b39296919268fee216332929df591f2b66
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Calling peek() for qsslsocket caused socket data to be copied into
qiodevices buffer and therefore make it unaccessible in qsslsocket.
Cherry picked form 4.8-branch & modified to Qt5 API changes
(int -> qintptr)
Original commits:
commit 621f18955082fc73471e75d1f8c35c2dcd4befeb
Author: Shane Kearns <ext-shane.2.kearns@nokia.com>
commit 68b1d5c17aa38d5921bdade2b0e0cb67c6c90513
Author: Kalle Viironen <kalle.viironen@digia.com>
Task-number: QTBUG-18498
Change-Id: I6be4b19baec2f3197537f5e7b61432040ec84ad2
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test was marked insignficiant on Ubuntu 11.10, but the only failure
was an XPASS. Make the test significant again, and only include the
QEXPECT_FAIL for CI platforms where the test is known to fail, i.e.
Windows and Ubuntu 10.04.
Task-number: QTBUG-20778
Change-Id: I24af3dab45118758382ba03c8c7a310f16301f8c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has three stable failures on Windows. Mark those failures
with QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-24294
Change-Id: I9eee2701a228912c3a91fa730e712661fb93add6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Until March 15, 2012, this test failed consistently on Mac and passed
on other platforms. Since then, the test has passed consistently on all
platforms.
Change-Id: Ie773643a1c9dc0ab3596786badbc3c3afd4824d6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Compile fix for tst_qtextscriptengine.cpp test on the mac.
Change-Id: I912a339c6c659dc8958cc5997a331e3c18c9cb06
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
I had missed these, apparently.
Task-number: QTBUG-23274
Change-Id: I6455dc34b18ec9cefccfe527b3fd3ad34fb61aa3
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
I have not added tests for warnings or other failure to input. This
tests only proper output for the moment.
Change-Id: Ie01fd2a78adfa57c27bf288a08cd44ae82f51241
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: I87918276987b3a506c2ac8556940fce89a2d20cd
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These warnings are expected and correct, so ignore them.
Change-Id: I43931950e46bd3c931db869902574ee7219efa1d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Adjust the test because we don't read past the end anymore.
Task-number: QTBUG-25108
Change-Id: I8243f1d5ae79d1256aab2cb1132598a716a7eeeb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
If the "bypass proxy for local addresses" option is enabled in
the windows proxy configuration, then do not use the proxy for
any IP address in the subnet of any network interface.
As the systemProxyForQuery api is now offering HTTP proxy tunnels
for TCP sockets, this change avoids local ad-hoc network
connections being routed through the proxy.
In the case where the local address was on a different interface to
the proxy server, it may have been unreachable through the proxy.
For example IP over USB or Bluetooth.
Change-Id: I0842732832a7795112be029d923ed168edc008d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I279881693b6eba15a2e145742b3281c9425e9b2e
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I0c5b511229a7ac0c2aa23a9c3d2053077e94936c
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Factor out controls from the window flags test, split state
into Qt::WindowState (QWindow) and Qt::WindowStates(Qt::Widget).
- Add to geometry test.
Change-Id: I25b9a8696bfb7f4faef113ac82559ebb90a140c5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
QObject is no longer exception-safe and there's no one working on
improving this, so let's not block innocent commits because of this
failure.
QObjectPrivate's constructor initialises the
QObjectPrivate::threadData member to null, but the destructor
dereferences it unconditionally (the member is initialised in the
QObject constructor). That means QObjectPrivate is not exception-safe
by any definition and, so, anything depending on QObject is not
exception-safe.
Change-Id: If9d5004630b7ce2fb357e328627794caad67564f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Workaround QTBUG-24451 by retrying creation of SocketPair if it fails
(waitForConnected and waitForNewConnection are used in the factory
function).
Skip very unstable test cases due to QTBUG-25386
Change-Id: I32129922329b895eb3719d61719c487a4d52c466
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add window state change notification logic. Send
and expose event in addition to window state change
on window restore since the QWidget logic expects
this.
Modify QCocoaWindow::setVisible to sync up window
state that may have been set on the hidden window.
Refactor NSWindow event observing to use one observer
function for all notifications.
Add window state testing to tests/manual/windowflags
Add delay after showFullScreen in tst_qstatusbar to
wait for the Lion fullscreen transition.
Change-Id: I57c523cedd0644d4181b40d72046fad4fdb09a9c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has not failed in the last 400 CI runs.
Task-number: QTBUG-23639
Change-Id: I2a8e105ebcba3654a6aac4fd8207c8fbcd2c4db3
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Introduce a new QtMessageHandler that takes QString instead of
char *: This avoids converting to local8bit , only to convert it back
to utf16 for Windows.
The old QMessageHandler is kept for a transition period, but will
be removed before Qt 5.0.
Also fix qEmergencyOut (that is called in OOM situations) to not rely
on the default message handler.
Change-Id: Iee0ce5838f97175c98788b847964273dd22d4a37
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This doesn't fix the bug, but confirms that it is CI flakyness.
Task-number: QTBUG-21098
Change-Id: Ic37a7574af88205371f4b2c24113d12b1386835c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test has four stable failures. Mark those with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-25297
Change-Id: Ic5304443c4467c46f70ef033c8f17d7f3732294c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The test has one stable failure on CI, but that failure is not observed
by all Ubuntu 11.10 users. Mark that failure with QEXPECT_FAIL when it
is going to fail and re-enable the test, following the pattern
established for the qtcpsocket test on this platform.
Task-number: QTBUG-23380
Change-Id: Ic7546595f314c55ebd36957ada92978141a1c509
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
- Remove Q_WS-ifdefed sections and switch by platform name instead.
- Remove Q_OS_IRIX and Q_WS_QWS conditionals
- Fix deprecated QPixmap::grabWidget(), QPixmap::grabWindow()
calls.
- Use QTest::qWaitForWindowShown() instead of
qt_x11_wait_for_window_manager().
- Rewrite some platform-specific code using QPA interfaces.
Change-Id: I29ce4c4f3e5c05edddfd018dc2eabdd77738eb23
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
ConnectInBackground should be set when opening a network session
due to a background request. This test checks that.
Unfortunately, none of the bearer plugins currently in Qt Base support
this attribute, so the test result is inconclusive.
(testing with a debugger shows the attribute is set correctly, but
it can't be read back as the set is discarded by the plugin
implementation)
Change-Id: Idcf777fe489a62d4ff5007ffd291a84ba052311b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Using the policy change signal from QNetworkSession.
If the new policy disallows background requests and this is a
background request, then generate an error.
This results in a TCP RST on the socket, and a
BackgroundRequestNotAllowedError on the QNetworkReply.
If the reply is already finished, no action is taken.
Change-Id: I4ff5c681a8b7b852727bb95f03664d666f4efe07
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Ftp and Http have different implementations of QNetworkReply,
so test both of them.
Change-Id: If502fa1788110edf89e619966534eea08830a19b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Test positioning QWindow and QWidget (frame / normal geometry)
for testing QPA plugins.
The test can be built with Qt 4 for comparison.
Change-Id: I695bf28d5fdf738262d322518d01ad04aa5056f5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This test hasn't failed in the last 400 CI builds.
Task-number: QTBUG-4965
Change-Id: I2ff03b7a12906a2b583b3127bf47c12b901ed319
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This test has not failed during the last 400 CI builds.
Task-number: QTBUG-23641
Change-Id: Ibcb840679e023db41456e41eedcfcc38ecedbaac
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This test passes consistently on Mac OS, but crashes consistently on
Windows and fails consistently on Ubuntu 10.04 and 11.10.
Disable the test only on platforms where it known to fail, so that CI
can use it to detect future regressions on platforms where the test
currently passes.
Task-number: QTBUG-22560
Change-Id: I0def45e1ed7dd3387e42e7294a495c89bc0caea6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test passes consistently on Mac OS and Ubuntu 11.10, but crashes
consistently on Windows and fails consistently on Ubuntu 10.04.
Disable the test only on platforms where it known to fail, so that CI
can use it to detect future regressions on platforms where the test
currently passes.
Task-number: QTBUG-25293
Change-Id: I5d6a474ea1e6fdf3983f164ebc181e1dd6e3f639
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has one unstable failure that occurs about 0.8% of the time in
CI. Make the test catch this particular failure and re-enable the rest
of the test.
Task-number: QTBUG-20688
Change-Id: I22f5d372db77ea35163f96195ac0c174d8078899
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The constructor is wrong, it creates instance of QVariant encapsulating
a QColor instance. QVariant should not implicitly convert data, never.
Change-Id: Idc794ecdecb42d8b53fee3f993bf51ddd43f595d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22815
Change-Id: I38445b659235076b00d9dd82d2a824d1caa1439b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22812
Change-Id: I1e1ad63472db7ba724c9936ae718de0b3b078bbd
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test hasn't failed for more than 250 CI runs, before which it was
failing consistently.
Change-Id: I0c2f7d3893731c800bebb0d3d51312d0d0948eb5
Reviewed-by: QTBUG-23057
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has not failed in more than 300 CI runs, before which it was
failing consistently.
Change-Id: Ib9a0e4120b276e5620b544a0836134f1cbac7c84
Reviewed-by: QTBUG-23063
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The test has two stable failures. Mark these with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23064
Change-Id: Ibb607ac252a6690d0d37f650a5ae41e5e2a681a2
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has one stable failure on Mac. Mark that failure with
QEXPECT_FAIL so that the rest of the test can be used by CI to catch
regressions.
Also, change the failing QVERIFY to QCOMPARE so that the mismatching
QStringList values will appear in the test output.
Task-number: QTBUG-23062
Change-Id: Icb0cccfe0bd5bc74a6a2c1ddba89c1f55f5e64de
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has not failed in the last 1000 CI runs on Mac. It only fails
when the test machine has some printers configured, which is not
presently true for the CI machines.
The two options are to disable the test on all unix platforms (because
it fails on all unicies when there are printers present) or to enable
the test for all platforms so that CI can catch regressions that don't
depend on having printers connected. I choose the latter option.
If the CI machines are configured with printers before the known bug is
fixed, the failures should be marked with QEXPECT_FAIL rather than
disabling the whole test again.
Task-number: QTBUG-23060
Change-Id: I3cebed4aefdd088ff00215ea9d7413f90bd9e9b1
Reviewed-by: John Layt <jlayt@kde.org>
This test used to be unstable, but has not failed for more than 400 CI
builds.
Task-number: QTBUG-23637
Change-Id: I0d92136aa9d641e447820ab19b53034f475f74da
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This test hangs ~2.6% of the time in CI.
The previous commit which attempted to mark this test as insignificant
did not work due to this .pro file doing a load(testcase) prior to the
line which set CONFIG += insignificant_test. testcase.prf must be
loaded _after_ insignificant_test is set.
Task-number: QTBUG-25342
Change-Id: I20470337fda8235e2fd0b6e8d5f564c8c57d167e
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
That change also fix moduleForType() which was wrongly recognizing
negative ids as belonging to Core.
New tests were added.
Change-Id: I40a5819effb32489a45937011980457387c9f8be
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This has been broken since modules do not currently find
their (public) dependencies.
Change-Id: I0c9e7c46f7a6499993c98aa6d33996bdd3a1be5f
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I061130e5b937ad818cc9016ae62d5890092d60f2
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This test has not failed in the last 300 CI runs.
Change-Id: I559ea223856b1460deb343384d5b4439f42a41d7
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test has not failed in the last 400 CI builds.
Change-Id: I22b59565a6a6cb48653bd9b0d967abbf074d59a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reference tasks with detailed analysis of failures rather than generic
task for blacklisted tests.
Change-Id: Ibd0ed836ffb84fe9aa14488d43085316e666de21
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Follow-up to c55a99965d8c08d5f924d49db4fe4aa49df8096.
3 problems prevented stored procedure output parameters from working.
- SQLBindParameter needs access to buffer provided by QByteArray.
- The length of the buffer is measured in bytes.
- A typo corrupted conversion back to QString.
Also, data() makes more sense than constData() to expose the buffer.
Task-Id: QTBUG-18435
Change-Id: I66444b13c0f584ed79bcf026e5a23caff83c22cb
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
results are now equals to results of ICU's u_isprint() for the entire set
of the Unicode code points
Change-Id: I763f4b37cccd285eb01543d486f25bd7ea011241
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The placeholder name must include the : prefix.
Several type tests for aggregate functions assumed sqlite behavior
which is actually exceptional due to sqlite's loose type system.
REAL is a synonymn for DOUBLE in sqlite but is also compatible with
at least MS SQL Server, PostgreSQL, Oracle, and MySQL.
Change-Id: I97f8c55d2e962b072cfab11a121fda685666e754
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Archived build logs on http://testresults.qt-project.org/ci/ show that
the QPluginLoader test has failed in CI only once in the last 1000
builds (in build 1786), and on that occasion the test was legitimately
blocking a regression.
The QFactoryLoader test was derived from the QPluginLoader test and has
not failed since its first run on March 29, 2012.
Task-number: QTBUG-22765
Change-Id: I866b4b8e30e393e0c7e7292119c072b27008ab43
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has two stable failures, one of which slipped through while
the test was disabled. Mark the failures with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-24186
Change-Id: Ie24f86603a01634d6eec5a42baa77e966f9388c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is a regression introduced by commit
22b7d21186.
Task-number: QTBUG-24965
Task-number: QTBUG-25140
Change-Id: I3f3bfe23af802444b078a29ee5565dd2bd24a34d
Reviewed-by: David Faure <faure@kde.org>
Part of this test was skipped on Mac OS X, due to a bug in timer
handling. This bug has been fixed[1] and the test now passes again.
[1] https://codereview.qt-project.org/#change,21953
Task-number: QTBUG-24319
Change-Id: Iad0a315cfdfcfb007e8aa9243cfef4b2f2b33895
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test is like qguieventdispatcher, it duplicates a corelib test in
the gui test suite, since the QtGui library often gets a different event
dispatcher implementation from the platform plugin.
Change-Id: Ifd724066950bc3b98a804bc2e5d40ce7b0429af4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The failure was fixed by commit e430ddfafc
and the test has not failed again in the >500 CI builds that have
occured since that commit was merged,
Task-number: QTBUG-23061
Change-Id: I41063f9dbc6b6d7d6b99f1a0c20708b0842353d5
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The number of paint events is correct now, but the first expected region
is still incorrect. Move the XFAIL to the region comparison.
Change-Id: I3e706cf703b20a0e98b644b3082172fc3142b44f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QTimeLine appears to have very poor timing characteristics. Historical
CI logs show roughly one failure in every twenty-five test runs on
Windows, and less frequent failures on Mac and Linux.
The root of the problem seems to be that QTimeLine's currentTime
counter appears to run at a variable speed and the only guarantee is
that it is slower than wall time. The frameChanged() test
function waited for double the expected duration of the timeline and
still found that the timeline had failed to finish in about one in every
thirty test runs. The interpolation() test function also failed for the
same reason, though less often.
This commit makes the frameChanged test more strict so that the poor
timing will be demonstrated more often, waiting only 1.5 times the
duration instead of double the duration. It also makes the test fail
gracefully so that this known issue won't disrupt CI when the test is
made significant in a later commit.
Task-number: QTBUG-24796
Change-Id: If469d43abb662e24445a9da619052eea9cf7c581
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTimeLine::currentTime() is an integer in the range [0..duration], not a
float in the range [0.0..1.0]. The aim of the test appears to be to
verify that currentTime() is at least 90% of the way to duration() when
the timeline is almost due to finish, so verify that and give the
corresponding 10% tolerance on reaching the end state.
Change-Id: I38646947c3b9189a4e8e91a450c6071430ddc66a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test hangs ~2.6% of the time in CI.
Task-number: QTBUG-25342
Change-Id: I2c3531140e15edfe2dc2524e101b84e3206a4e61
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Default QDataStream version was changed in Qt5, but the test tried to
load an old dumped file.
Change-Id: I49c06c232ec8a27f33c9da345bae4e03cd0c56fb
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
When destroying a window immediately after showing it, we can sometimes
provoke a crash in Cocoa after the show-window-animation has finished
(which appears to assume that the window's view will always be valid).
Prevent the crash by not removing the view from the window. When
recreating a window, we explicitly release the old window, but we do not
release the view, so we can freely add it to the new window (i.e. this
does not introduce new bugs related to recreating the platform window).
Task-number: QTBUG-24977
Change-Id: I466ce75b04785401032a0a2d4a2c494910cd1672
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Otherwise, the order of updating of the indexes will cause
inconsistent results because it will rely on ordering within a
QHash (which is indeterminate).
Task-number: QTBUG-25325
Change-Id: I7d99578c8ee2954b8562dc5aff7dc32e74d41fb5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test has not failed in the last 500 Continuous Integration runs.
Task-number: QTBUG-22769
Change-Id: Ib2e95bb2291757941baa0ea46d568816eef20b09
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This makes it easier to find insignificant tests that have no associated
bug report.
Change-Id: Ia71d59da062818d3860b0365d063e044705267fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When encountering a null preprocessing directive (which is supposed to
be ignored), the moc preprocessor will leave a PP_NEWLINE token in the
token stream. That will confuse the parser.
The PP_NEWLINE token need to be ignored in the preprocessing phase.
Task-number: QTBUG-22717
Change-Id: I1e502a7e5bc6fa8ce2f82109ba7199b95747ff0a
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Lots of uses of the annotations and error names, plus a bunch of local
unit test names (including one file that had to be renamed).
The meta object generator is updated to support both the old and new
names. That means some references to com.trolltech *must* remain in the
source code.
Task-number: QTBUG-23274
Change-Id: Icc38ae040232f07c437e7546ee744a4703f41726
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Change the old com.trolltech ones to org.qtproject and introduce Use
the alternate domain name for the Qt Project because the dash
character is not valid in interface and error names.
Task-number: QTBUG-23274
Change-Id: Iac1699e70525d67f983c10560932acff6b2ecde6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The testChildrenLayoutsChanged fails randomly. This happens rarely,
f.i. wasn't spotted by CI when QHash randomization itself was merged;
but is indeed reproducible by running the test a few times in a row.
This is now blocking api_merges integration, and I have no idea
how to fix it.
This patch marks the test as insignificant for now (the bug
tracking this test failure is QTBUG-25325), and switches the failing
tests from QVERIFY(a == b) to a proper QCOMPARE (so that the
expected values do show up in the build logs).
Change-Id: I16f0e28bcbb06dbac2e7169f4676a19ccf626a92
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
http://unicode.org/versions/corrigendum6.html:
> in Unicode 5.0, the list of characters with the Bidi_Mirrored property
> was made consistent for brackets and quotation marks, in preparation for
> new constraints on bidi mirroring. However, after publication of
> Unicode 5.0.0 it was discovered that this change adversely affected
> several quotation mark characters in deployed data.
Task-number: QTBUG-25169
Change-Id: Id49caf401af2d5a1e6dbcc32b2f350aa20b7f901
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test fails consistently on the CI (but never fails on any
of the developer machines). This is possibly a timing issue.
Change-Id: Ie40d9c38c3128a93898b0e50bfde5a754bd2b7fb
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The key returned by QHash::key is an arbitrary one that maps to the
given value. The test instead relied on it being a specific one.
Change-Id: I090351797e8b52036d78160fd810518a11e8107d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Applied Bill King's suggestion in QTBUG-1363. Columns of
hStmt must be accessed in order.
Verified using ODBC driver on SQL Server 2005 on Windows 7.
Added test for length of text field for MS SQL Server over ODBC.
Task-Id: QTBUG-1363
Change-Id: I6673dafe75e3ef394d41e439adb45096c1421068
Reviewed-by: Bill King <bill.king@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The hash autotest is wrong: it assumed that the iterator on the hash
would reach the end after iterating on two elements with identical key.
But three elements were added to that hash, and the third one
can appear after the other two.
That code path is left for the map test only.
Change-Id: I51de7987e2b132b6caff7bb4bac6a57fb7fcb530
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I have run the test 250 times in each of these configs with no
crashes observed, so assuming the instability has been fixed
by another change.
ubuntu 11.10 64 bit
ubuntu 10.04 32 bit
windows 7 msvc2010 64 bit (debug)
windows 7 msvc2010 32 bit (release)
Task-number: QTBUG-20686
Change-Id: I02bab165c263cf79684c7723eae1e278839b1e37
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Just XFAIL the failing test instead of ignoring the whole test.
Task-number: QTBUG-25272
Change-Id: Iedca9913032f13c6610b049a0313c9e4336216e0
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Just implementing the ### Qt5 suggestion about making
controlTypes a virtual function.
Change-Id: Ic1db47fe488f089de965438e456e9b48e0b96f32
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test has been XPASS'ing since a long time now.
Change-Id: Ibfcd1b5078e0b8efed9ed0740a4238d24ef8ca33
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
That was a regression introduced in 1c5db1aff
Example:
signals: int *someSignal();
would produce this code:
int* _t0 = int*();
which does not compile
So have special handling for pointer to change it to '= 0'
Change-Id: Ie695e15e309d15c3cfd5c5a69ac8bf6d61ae9915
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This test hangs 2-3% of the time.
Task-number: QTBUG-25284
Change-Id: I32e01696262be2de7e015b8f811d1666551426cc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
The new QUrl is able to distinguish a URL component that is empty from
one that is absent. The previous one already had that capability for
the port, fragment and query, and the new one extends that to the username,
password and path. The path did not need this handling because its
delimiter from the authority it part of the path.
For example, a URL with no username is one where it's set to QString()
(null). A URL like "http://:kde@kde.org" is understood as an
empty-but-present username, for which toString(RemovePassword) will
return "http://@kde.org", keeping the empty-but-present username.
Change-Id: I2d97a7656f3f1099e3cf400b199e68e4c480d924
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test no longer fails, so we can remove CONFIG+=insignificant_test
Task-number: QTBUG-22767
Change-Id: If3ca194fc982ad8fdc3e9a7f62fc346190ff01ea
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test no longer fails, so we can remove CONFIG+=insignificant_test
Task-number: QTBUG-22766
Change-Id: I379873d5c483157e414201e5f8a13c3f4407f9fd
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This does not fail anymore, remove CONFIG+=insignificant_test
Change-Id: I4f98cfad563adfa460910976317c91e852db6872
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Add a toplevel manual.pro and other .pro-files to build them and
fix the build.
Change-Id: Ibc98a27b39dd1304edfa8a6894d62e77ce7ef387
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
I can't say for sure why q*linecontrol passes an empty rect to
the updateNeeded() signal when an input mask is set; presumably
the empty rect at some point has meant "full update", but there
are a few problems with this. Surely a full update is wrong,
even if the semantics have been lost in translation somewhere
(likely the qlinecontrol refactoring). This fix ensures
that empty rects from updateNeeded() are interpreted as a request
to update the whole widget. A further improvement would be to
ensure the line control doesn't request a full update when an
input mask is set. The cursor is usually wider when a mask is
set but because of QLineEdit::paintEvent()'s implementation,
there is currently a mismatch between the cursor width as seen
by q*linecontrol and what is actually drawn, which causes
rendering artifacts if updateNeeded() sends the cursorRect().
Since QLineEdit and Q*LineControl aren't actively developed, it's
best to keep this fix minimal, although the performance cost of
updating the whole line edit when an input mask is set is
unfortunate.
Task-number: QTBUG-7174
Change-Id: Ie51e015d760915e07b0220b770f04fc958d93a12
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Most of the tests were removed while QUrl::toEncoded or fromEncoded
were deprecated in the development process. Since they aren't
deprecated in the end, bring them back.
Change-Id: Ibdb6cd3c4b83869150724a8e327a03a2cd22580d
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
By having the default value equal to zero, we follow the principle of
least surprise. For example, if we had
url.path()
and we refactored to
url.path(QUrl::DecodeSpaces)
Then instead of ensuring spaces are decoded, we make spaces the only
thing encoded (unicode, delimiters and reserved characters are
encoded).
Besides, modifying the default can only be used to encode something
that wasn't encoded previously, so having the enums as Encode makes
more sense.
As a side-effect, toEncoded() does not support any extra encoding
options.
Change-Id: I2624ec446e65c2d979e9ca2f81bd3db22b00bb13
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows things like http://example.com/{1234-5678}?id={abcd-ef01}.
But do not allow it in other parts of the URL. I could allow it in the
fragment, but in the username and password it would be too ugly.
In order to do that, make DecodeReserved use two bits and have
PrettyDecoded set only one of them. That way, toString(PrettyDecoded)
can be distinguished from toString(PrettyDecoded | DecodeReserved),
just as path(PrettyDecoded) can be distinguished from
path(PrettyDecoded & ~DecodeDelimiters).
Also, take the opportunity to avoid decoding the reserved characters
in the query. Keep them encoded as they should be.
Change-Id: I1604a0c8015c6b03dc2fbf49ea9d1dbed96fc186
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
DecodeReserved applies to all characters between 0x21 and 0x7E that
aren't unreserved, a delimiter, or the percent sign itself.
Change-Id: Ie64bddb6b814dfa3bb8380e3aa24de1bb3645a65
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
There's little value in having the DecodeUnambiguousDelimiters option
since neither QUrl nor QUrlQuery can return values that are ambiguous
in that particular context, ever.
This option could be used to encode a character if, when placed
in a URL, it would need to be encoded. Such cases are hash (#) or
question marks (?) in the path component, or slashes (/) and at signs
(@) in the userinfo.
However, we don't need two enums for that, since there are no
other characters that can appear in either form. Still, leave two bits
for this enum. In the future, if we want to split the gen-delims from
the sub-delims, we are able to.
Change-Id: If5416b524680eb67dd4abbe7d072ca0ef7218506
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This tests how QUrl encodes and decodes certain characters and leaves
some other ones alone. It also tests that the output of toString() (in
whichever encoding was being tested) is also parsed again to be
exactly the same as the previously decoded form.
Change-Id: Ie358d001f8b903409db61db48bde1ea679241a60
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is the same fix as the previous commit did for the other
components of the URL. But we're also changing how we handle the "[]"
characters in a query: previously the handling was like for other
sub-delims; now, they're always decoded, assuming that the RFC had a
mistake and they were meant to be decoded.
Change-Id: If4b1c3df8f341cb114f2cc4860de22f8bf0be743
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Refactor the way that QUrl stores and returns the components of the
URL so that ambiguous delimiters (gen-delims that could change the
meaning of the parsing) are interpreted correctly. Previously, QUrl
called "unambiguous" the form found in a full URL, even though each
item in isolation could have more characters decoded.
Now, instead, store only the fully decoded form. To recreate the
compound forms (the full URL, as well as the user info and the
authority), we need to do more processing.
This commit applies to the user name, password, path and fragment
only. The scheme, host and port do not need this work because they are
special; the query is handled separately.
Change-Id: I5907ba9b8fe048fff23c128be95668c22820663a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
- The crash on XCB can no longer be reproduced.
- Use QFINDTESTDATA instead of SRCDIR defines.
- Remove Windows CE specific profile section.
Task-number: QTBUG-20756
Change-Id: I6077b3a0daacb15ab440a90c7bda247aa3756fa5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
0xfdef-0xfdd0 is definitely 31 and not 15 :)
also fix all copy-pastes of this code (greping for '0xfdd0' helps ;)
Change-Id: I8f3bd4fd9d85f9de066f0f5df378b9188c12bd48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Crash on XCB can no longer be reproduced.
Task-number: QTBUG-20756
Change-Id: I057231a397573f2a28a1325c6d6f728735ebbee6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
