"off" is not quite suitable because that turns the output off, as the name suggests.
Disconnected outputs are skipped automatically - it is natural to have a way to
request the same for connected outputs as well.
Task-number: QTBUG-74871
Change-Id: I8bea83428ae0424601b19482b6e6ef809491d0fb
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
The previous code and comments refer to the "separate engine" and skip
such interfaces. Given we explicitly disabled this "separate engine",
skipping the interfaces is a bit cruel.
Task-number: QTBUG-65593
Change-Id: Ie9dce1661bd697f22044ca6fb4a5e2485ef74253
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is a follow-up to f5850cb0da, which
did not take into account some special-casing for macOS framework build,
thus causing CMake to look for QtFoo.framework instead of Foo.framework.
Change-Id: I261b14e75fde66fb57486bde43fc936f796a6f96
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
This reverts commit a868942b11. We know how to fix it properly.
Change-Id: I9180aeca82f884333d53bab9c6d588ee3a23d3cb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When investigating the bug report, it was discovered that the
offscreen window is assigned a default geometry by
QPlatformWindow::initialGeometry(), causing subsequent resize events
and flushing of event queues. Suppress that by making it a popup which
is not subject to window title bar restrictions on Windows and setting
the respective flags.
Task-number: QTBUG-74176
Change-Id: I7f9c1a3bfd57072c8188a98124bde87491dd25eb
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The release coordinates may be simply initialized to 0 in lower levels of the
tslib. They are then passed through the calibration stage, which applies
offset and multiplication to them, so they may end up even as positive numbers.
Since we can't know if we can trust them or not simply ignore all release
coordinates and just always use the ones from the previous event.
Change-Id: Ib845b5ab1c5b81967cc089d601576893f433fa4a
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It is not identical to en_US, as we have long claimed.
Fixes: QTBUG-75069
Change-Id: I236adcefdcb4120d2bf5adbcde727c5e3ca13986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pointed out by Daniel Teske.
This amends commit c3e1abad4e.
Change-Id: Ia6c6f41bf28e846152f9f86322f20a1b99e57201
Reviewed-by: David Faure <david.faure@kdab.com>
Back in 36cb3f3f65, we started
properly reference counting font engines as they were entered into
the font cache. Prior to this, ref.load == 0 would mean that the
engine was essentially owned by the cache.
When the change was made, the condition that an engine must be in
use if its reference is != 0 remained, and the result of this was
used to calculate the limit for when the cache should be flushed.
Since this limit was miscalculated, the cache would keep growing,
even if it only contained unused font engines.
[ChangeLog][QtGui][Text] Fixed a bug which could cause the font
cache to grow larger than it was supposed to.
Task-number: QTBUG-76219
Change-Id: I4d1541756f3bdf5bd9b0301bf47c6db2e220716a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Change-Id: Ibff4555cbd1e980333acd88c697021b4a74998a8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the start position of a backward string search was the at the start
of a paragraph, the code would start searching at an illegal position
(at the eol character) in the preceding paragraph. That caused
that whole paragraph to be skipped, so any matches there
would not be found. Fix by making sure the search starts at legal
position.
Fixes: QTBUG-48035
Change-Id: Id6c0159b6613ec75ec617a0a57096ceef2b4cbd0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It's cursor position not widget position, pos() is relative
to the widget, and 3 of these accessors return QPointF.
Amends e6ddae07e1.
Task-number: QTBUG-36985
Change-Id: Ide437f7496824f8cdd0d03fa38ad7b573e30feaa
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
- Use nullptr
- Fix warning about inconsistent parameter naming in CsvCompleter::pathFromIndex()
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Use initializer lists
- Fix the class declarations, use override, member initializations
- Remove goto, streamline code
- Use auto to avoid repeating the type
- Introduce std::unique_ptr
Task-number: QTBUG-38014
Change-Id: Ia8ecd799064d630648b385b606848d7474c51363
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The checks whether we have a Qt prefix build were broken for
top-level builds. Non-prefix top-level builds were incorrectly
detected as prefix builds.
For top-level non-prefix builds QT_HOST_DATA/QT_INSTALL_PREFIX becomes
something like "~/my/build/dir/qtbase" but .qmake.cache (and
.qmake.super) is/are created in "~/my/build/dir".
This patch extends the prefix_build check by probing for the existence
of .qmake.super, which only exists for top-level builds. Also, we add
qt_prefix_build_check.prf as central place for determining whether we
have a prefix build to make sure that qt_configure.prf and
qt_build_config.prf use the same logic.
Fixes: QTBUG-76185
Change-Id: I2b76fe26013496aaf2dac96ea711b06a69550a29
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Backtraces with optimize-debug are less useful due to scoped variables
no longer alive, and some gcc bugs with inlining.
Fixes: QTBUG-75514
Change-Id: I6d62441047daee8f7079d1538dfc92015dd7ea63
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
While this is generally true for widgets, QHeaderView's documentation
about how appearance related data roles are respected can be misleading.
Fixes: QTBUG-31804
Change-Id: I93c6562e59ecf771d938d282723169202ac15bc2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
[ChangeLog][QtCore][QTimeZone] The IANA timezone database backend
now properly follows symlinks even when they point to variable
locations like /run or /var (useful when /etc is mounted read-only).
Fixes: QTBUG-75936
Fixes: QTBUG-75527
Change-Id: If0dc2bfa20659e76c3bd062c75597a9ad01ad954
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix clang warnings that are disabled in the default build.
Change-Id: I4e773a24884db94acdc6c295d3f66da07cd8a5bd
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
The class used the default debug operator for QObject, which outputs
the object's address. This makes it hard to compare the log output.
Make the existing QObject formatting helper from the EventFilter
publicly usable by providing a helper with a stream operator.
Change-Id: Ifab83e23cc792a5efe231fd9ae84e0439ab0d609
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QMake searches a .qmake.conf file to determine the source root of the
project, and a .qmake.cache to determine the build root.
If a .qmake.conf exists but no .qmake.cache in the build directory is
found, a build root would be set that is only valid if the build
directory is at the same depth as the source directory.
The invalid build root resulted in the creation of .qmake.cache files
at "interesting" locations (e.g. high up in the directory tree), a
potential cause for even more interesting build failures in the
future.
Fix this by splitting up the loop that determined build and source
root. Both are now determined independently of each other.
Fixes: QTBUG-76140
Change-Id: Ib5c922b87879fcf2f076298a69abcdbc4e8587b3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Various things were out of date, misdescribed or just plain wrong.
Change-Id: I11b7bd419604067fce2577a42882ebf126629016
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This is needed for cases where we use e.g. "file:///test.html?query#Fragment".
The fragment and query were already preserved for the qrc scheme. This
fixes it for the file scheme.
Change-Id: I5713e4a25372fdd55ac255b1c6228b4dea419244
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
cocoaButton2QtButton(NSEvent *event) did not handle NSEventTypeLeftMouseDragged,
NSEventTypeRightMouseDragged, NSEventTypeOtherMouseDragged.
Task-number: QTBUG-74763
Change-Id: I9f48230599f16400b49edbff392f712eb1fff782
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This also fixes a bug where we were implicitly capturing this inside
the block, which meant that we would crash if the theme was recreated.
The capture is now tied to the lifetime of QCocoaTheme.
Change-Id: I37df8e6c0b33bf41e76d66be3cf29576041a7546
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use the comparison helpers to do fuzzy checking of geometries.
Change-Id: I00f4403f3bca2e8a3996e938a85ba799e083058c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use m_buttons instead of currentlyPressedMouseButtons. The latter returns
the state of devices combined with synthesized events at the moment,
independent of which events have been delivered via the event stream,
so this method is not suitable for tracking.
Task-number: QTBUG-74057
Task-number: QTBUG-74121
Change-Id: Iabf99ada6c3d25a995c9ddf895059b70833a9051
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Those modules are TEMPLATE=aux, so they weren't triggering the file creation
here.
To make this work properly we have to:
- check for TEMPLATE aux in the right places
- add a dummy target to INSTALLS to actually trigger the creation
- initialize PRL_TARGET for aux templates
Fixes: QTBUG-75901
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Idce141629dd34287808bfffd159f92ac28c6c8b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Especially for header modules we don't want a 'Libs:' entry in their
.pc file.
Task-number: QTBUG-75901
Change-Id: I39037d3132e39dd360532e1425f794ebec28e0bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMake code like
rplc.match =
QMAKE_PRL_INSTALL_REPLACE += rplc
led to the generation of invalid sed calls in the Makefile.
It is already actively checked for empty matches, but if *all* matches
are empty, the sed call looks like
sed foo > bar
which is invalid.
Task-number: QTBUG-75901
Change-Id: I173ed99826414dcf06253a15a247f7d067ee3977
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt5_add_big_resources is only available if using CMake 3.9 and later.
This amends cdccd0222b.
Task-number: QTBUG-55680
Task-number: QTBUG-75806
Change-Id: Ibba7af6ee7edfb226368937d543b7ec5cc93eb16
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Use the whole value of 'name', not just the first element, and also
replace variables like ${QMAKE_FILE_IN}.
This fixes the file_copies feature (COPIES) for Visual Studio
projects, because for every entry in COPIES an extra compiler is
created with a name 'COPY ${QMAKE_FILE_IN}'. Before this patch the
name and the generated file filter would be just 'COPY'. However,
duplicate filters are being skipped by the VS project generator. All
but the first COPIES entry was ignored.
Fixes: QTBUG-76010
Change-Id: Icaa5d2cb8d88ae3ef8ce86220198bca1b9e673f5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
- Move the fuzz check introduced by
6309062722 to a shared header for
reuse. Use it in in more places to account for rounding errors
introduced by odd window frame sizes when scaling is active.
- Use the test widget size to ensure windows do not violate the
minimum decorated window size on Windows when scaling is inactive
on large monitors.
Task-number: QTBUG-46615
Change-Id: Icf803a4bc2c275eadb8f98e60b08e39b2ebebedd
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Invalid SUBDIRS values like
SUBDIRS += foo \
bar \ \
baz
would produce a Makefile with a sub-- target that will call the make
on the same Makefile again recursively, letting make run forever.
Ignore values like this and print a warning message.
Fixes: QTBUG-76068
Change-Id: I6ca0f8c8238249f1be02d8c311b4c148fd80e707
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Ask the style sheet style to adapt the palette in
WidgetTextControl::getPaintContext() as is done for QLineEdit.
Use the palette color in QPlainTextEdit.
Change-Id: I67758716b66feaeac8c2433c2a4d3744cd0d5327
Fixes: QTBUG-72100
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Instead of doing this directly inside the PE_FrameLineEdit as this can
be used directly when a stylesheet is set the rect of the lineedit used
in the combobox in fusion style is filled directly with the base brush.
This ensures it still renders the background correctly when using fusion
style, but enables stylesheets to work as it will not override that if
the background is set in a stylesheet for a combobox.
Fixes: QTBUG-75816
Change-Id: I50a0600b500088ebcf1d70a02f9c74c6040d34d9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reports say some systems get "Failed to find vkCreateMacOSSurfaceMVK"
even though MoltenVK and the corresponding extensionare there. While not
reproducable on single GPU Intel systems, it could be that not enabling
the extension on the Vulkan instance is causing this. Not opting in to
the extension is incorrect in theory anyway. So fix it in cocoa as well,
similarly to how other platform plugins do this already.
Task-number: QTBUG-76117
Change-Id: I75220f3582a700ce0037003086123d3d38524648
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Clear QGuiApplication::focus_window (again) in the
QWindow destructor.
Task-number: QTBUG-75326
Change-Id: Ief00b6adfb267fcc7e3881fd728e12df07fc1094
Reviewed-by: Christian Andersen <csandersen3@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It should have been qfloat16(1)/qfloat16(infinity) in any case.
Sadly, that behaves no better than qfloat16(1.f/qfloat16(infinity)),
which was promoting the infinity back to float. So retain the check
for over-optimization (but make the comment more accurate).
This is a follow-up to d441f6bba7.
Change-Id: Iec4afe4b04081b0ebfbf98058da606dc3ade07f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not necessary to call QWindowsScreen::windowAt() for every mouse
message received, but only when the mouse is captured, like it's done
in the legacy mouse handler.
Change-Id: Ib1035921291d22a32dfa3a619815a3f4ff9b3622
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Special applications like screen recorders can create special, invisible
windows which are detected by the ChildWindowFromPointEx() as used in
QWindowsContext::findPlatformWindowAt(). Fall back to WindowFromPoint()
which skips those in case nothing is found.
Fixes: QTBUG-40815
Change-Id: Idb5253c412fb4522c844edf5eadedc6e0fad3979
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
If automatic sysrootification is in effect (SysrootifyPrefix=true in
qt.conf) then the qmake property variants $$[FOO] and $$[FOO/get] must
be sysrootified. The latter was never sysrootified.
All other variants (src, dev, raw) are supposed to be without sysroot.
Flesh out a sysrootify function and readabilitify the code a bit while
we're at it.
Fixes: QTBUG-71673
Change-Id: Ifcbce8c035b9da447da9d6937edd5a4aa84573ba
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
... spotted with the brand-new checks for that in QCharRef.
The rx[i] == ~~~ check is clearly wrong, as rx is the regexp
we're building and `i` was not supposed to index into it.
The intended meaning was wc[i] == ~~~, testing if we were seeing
the closing bracket of a character set. We need to check for
that immediately for dealing with the special syntax of []...] where
the ] belongs to the character set (it can't be the closing one
as character sets cannot be empty).
Fix and add a regression test. Bonus: this code was almost
unchanged since 2009.
Change-Id: I958cd87fc25558e9d202d18b3dd4a35d0db16d8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <hjk@qt.io>
Many operations on and with QPainterPaths do calculations on the path
coordinates, e.g. computing the distance between points, which may cause
numerical overflow for extreme coordinate values. This patch
introduces a limit on the coordinate values and extends the previous
check against nan/inf coordinates to also check against out of range
coordinates.
Fixes: QTBUG-75574
Change-Id: I3a2fa88bfc6a9f19934c43d3dbbfb41855c78107
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It's too dark as it is now. Since there is no similar UI element
in AppKit, we take the same color as the toolbar's handle has (looks
OK-eysh with 'Dark' and there is no reason to have the separator with
a color different from the bar handle, both elements essentialy are
lines of dots).
Fixes: QTBUG-72759
Change-Id: I28277f80174a1c4c0af17961aba8ed6135aa3189
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
