This allows building the QVariant tests without the QtWidgets module.
Change-Id: I7cd7e78a60c7bc7614ec16df1abe1e93e45d4923
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The previous API was hard to use (global function, no type safety,
manual chaining), and confusing (app vs dispatcher split only made
sense on Windows). Installing and removing out of order would have
the risk of setting back a dangling pointer (crash). Meanwhile QPA
added type safety, and this new API models the QObject::installEventFilter
API for ease of use. The virtual method is in a new interface,
QAbstractNativeEventFilter.
QPA was even calling the dispatcher event filter with QPA-private event
classes, which made no sense (refactoring leftover from when the code
was in the dispatcher). Now the QPA plugins trigger the qcoreapp event
filters with the actual native events directly.
Change-Id: Ie35e47c59c862383bcaf857b28d54f7c72547882
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When turning off fullscreen mode and restoring the widget's geometry
we must inform the QWindow about the geometry change synchronously.
Otherwise QWidget::geometry() will return the old value.
Using the same technique for the state transition to fullscreen mode
without sending a separate resize event.
Autotest: tst_QWidget::saveRestoreGeometry
Task-number: QTBUG-26421
Change-Id: I869e36cd302d9a94e398f48949ab3cb7ee9cdf51
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QtWidgets and QtGui are currently compiled without exceptions,
which causes a crash with gcc 4.6.3.
Change-Id: I8f872f3bec6266444adf08d51a6678150c5fae8e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It should be possible to include both:
* <QtGui/private/qfoo.h>
* <private/qfoo.h>
Change-Id: I83ed5bba633b4a6b9bd38e315c987d78beecfb1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When mixing native and regular widgets in same QMdiArea, some
subwindows didn't properly get set native. This was because
when a native parentless widget was given a parent, it wouldn't
enforce native window on the new parent and its ancestors.
This happened because window flags were adjusted too late in
relation to createWinId() call in setParent_sys().
Fixed by moving the createWinId() call to its proper place.
Also removed some old Q_WS_* ifdeffing in QWidget::setParent() that
masked some native enforcement code.
Additionally removed few QEXPECT_FAILs from QWidget autotest now
that those cases work correctly.
Task-number: QTBUG-26424
Change-Id: Ib6f9d0531e5c7299e2c307734d49c81f1ffa9713
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
WinAPI GetTempPath() sometimes returns short names
for C:/Users/<user>/AppData/Local/Temp.
Change-Id: I33f991acc06e652ccd484d36a5a384eb776f8395
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
SQL Server 10 introduced stricter rules for TIMESTAMP validation,
making it necessary to specify the decimal digits.
Other databases might do the same as well, so this patch introduces
a check for the TIMESTAMP column size and adjusts the decimal digits
parameter as needed.
Task-number: QTBUG-2192
Change-Id: If6d798c6c928ebda75bc474e49a07fbbfbe5816c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
A virtual method was reimplemented to return an always-empty string,
probably a leftover from a refactoring.
This fix showed that tst_qwidget_window was buggy: between Qt4 and Qt5,
a "Before" became "After", which made "Before" unused, and was masking
the fact that the app name was empty by default. In addition, the
earlier Qt5 change that made the app name default to argv[0] now requires
updating this test, now that it's actually working.
Change-Id: I5360026821a9b95bedd0ff09dba3d51a22e542b7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
This makes it possible to add API for setting the restore policy
per state, or even per property assignment (QTBUG-17861).
This change is fully source compatible with Qt4.
Change-Id: I53628546b070f6fc84891f86e7ad7bd8ef5ba285
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Back when QStateMachine was changed to inherit QState, this
constructor was conveniently left out because setting the state
machine (root state) to be a parallel state group didn't actually
work. But as of commit d281aa6936,
it does work, so add the missing constructor.
Task-number: QTBUG-15430
Change-Id: I68c599baa0ef1bfc869195140cf5daf645e75b8b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
under extremely rare circumstances this would have actually failed
Change-Id: I4132d0f82e9f924e92e9e96f6d34451c94a67201
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is just for completeness of the understanding of the limitations
of private signals. There are no private signals in Qt which have
overloads.
Change-Id: Ic34c555aea360ee34beec796e597657888573da9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When the pushbutton is shown, it will generate both a ShowEvent and
a StateChange with active=1 (because it is a top level window).
This patch relaxes the reqirement in which order events are delivered.
Ideally the order should also relied on, but I'm not sure if that
is feasible due to differences among window managers across all
platforms.
This got provoked by codereview.qt-project.org/#change,26014
Change-Id: I96159fbb1b64f0ca8d13833d8a4c6799c655afc2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Since Qt's connections are thread-safe, QStateMachine's plumbing
around them should be thread-safe too.
Change-Id: I8ae91c2edc2d32ca4ed4258b71e5da22de30ed91
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
By default, QStateMachine lazily registers signal transitions (i.e.,
connects to the signal) when the transition's source state is
entered. The connections are established in Qt::AutoConnection mode,
which means that if the sender object lives in a different thread,
the signal processing will be queued.
But if a sender object's signal is used in an out-going transition
of the target state of the queued transition, it's possible that a
second signal emission on the sender object's thread will be
"missed" by the state machine; before the machine gets around to
processing the first queued emission (and registering the
transitions of the new state), a sender object on the other thread
could have emitted a new signal.
The solution employed here is to eagerly register any signal
transition whose sender object is on a different thread; that is,
register it regardless of whether the transition's source state is
active.
Conversely, when a machine's transitions are unregistered (i.e.,
because the machine finished), signal transitions with sender
objects on other threads should be left as-is, in case the machine
will be run again.
This doesn't solve the case where the sender object is moved to a
different thread _after_ the transition has been initialized.
Theoretically, we could catch that by installing an event filter
on every sender object and handle the ThreadChange events, but
that would be very expensive, and likely useless in most cases.
So let's just say that that case isn't supported for now.
Task-number: QTBUG-19789
Change-Id: Ibc87bfbf2ed83217ac61ae9401fe4f179ef26c24
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Some of the transition constructors didn't call the maybeRegister()
function, causing the transitions to be ignored if they were created
when the state machine was running and the transition's source state
was active.
Added tests that cover all possible cases.
Change-Id: If1b593b127bd719e3be4e5a2e6949a780c4e97c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The originalSignalIndex member was not set if the signature had to be
normalized. This caused the SignalEvent passed to onTransition() to
report a signal index of -1.
Improve the signal transition tests so they check both the event
passed to eventTest() and onTransition().
Change-Id: I5331fd1944d53310b6d11eb2fd8713b80faa53a1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Use the same trick as used for private signals in the models.
Change-Id: I4235788490cae0e3d554565621d145652dc5b0ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The private signals can not be used as function pointers, as
required by the new syntax, so we introduce a parameter which
can only be created privately.
Change-Id: I3d7bb8a163e764d685e8007cba831fb77e3c6855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Moc checks for the use of the QPrivateSignal struct, which is part of
the Q_OBJECT macro and is private to each class that uses it. Moc then
generates a name of the signal which does not include the private
struct, and generates code to invoke such signals with an instance of
the private struct.
This way we can mark private signals as such and prevent them from
being emitted from subclasses or from outside of the class entirely.
The drawback to this is that it only works if the private
signal has no default arguments. However, at least in Qt, there are
no such signals.
Change-Id: Id16eadaa8d3c36a2c3b265077877f3e1d8304c84
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Type traits can not be changed durring Qt5 life time.
Change-Id: If69f65ff2113c901580afee91b11ae1b11c13a4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Replace a list of QFuture<void>s and a loop that calls waitForFinished()
on each of them with a QFutureSynchronizer<void>, which does exactly that.
Change-Id: I1f2e90169a5b2949bd8cb9d1009a5a7af1500139
Reviewed-by: David Faure <faure@kde.org>
The SCXML spec had a bug that would cause the initial state of a
compound state within a parallel state group to be entered even if
the transition specified another (non-initial) state of the compound
state as its target. This only happened if the transition had
multiple target states.
The bug has been fixed in recent revisions of the SCXML spec. This
commit implements the fix, which is to walk the ancestors of the
transition's target states only after all the target states
themselves have been added, so that the default initial states are
correctly overridden/ignored.
Task-number: QTBUG-25958
Change-Id: Iac532047678c483a4a3996e24dacf30e00f6bbe0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Remember to register the metatype where we use it, so we don't depend
on another test being run previously.
And skip the setWorkingDirectory test completely on Unix. I don't know
why it needs to be skipped, but if we're not going to verify anything,
don't even try to do anything. This saves us one memory leak at least.
Change-Id: I22e151cc3fa7b4e976972aca8978b88b263d9bee
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is accomplished by introducing dependencies to catalogs.
This requires one API change:
QTranslator::load(const uchar *, int);
changes to
QTranslator::load(const uchar*, int len,
const QString &directory = QString());
Since now, even the load from memory might need a directory if
the memory block contains a qm file with dependencies.
Change-Id: I781f333d07f53bb431d0a7b5fa1abe282dc4d338
Task-number: QTBUG-26138
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When you're inserting a column in front of a rowspanned cell
and this cell is not the first in the rowspan, we would get
the wrong logical index of the new cell (putting it in
front of the initial cell with the rowspan). If the cell
does not span all rows, the table will get into a broken state
and trigger asserts in update(). To fix this, we search for
the first cell after the insertion point which has a logical
index higher than the cell directly before the insertion point.
Change-Id: I42e91a20d77b2ba9c5607f6cab23f51ed888cbd3
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Deprecate qWaitForWindowShown for Qt 6 as it is just a wrapper.
Change-Id: I0f8195679679120bd402e273fed4d331dc926708
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
As requested by Winfried Schenke:
"QPoint should have an unary operator+ (the unary operator- exists).
Classes with arithmetic operators should provide a complete set of
operators, because some template code relies on it."
Task-number: QTBUG-22913
Change-Id: Ib0c5105975f56c15f00bb48d83c8d911f5a204ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
- Make them compile with 4.8 for comparison
- Add Active to WindowStates control
- Add -layout option to windowgeometry
Change-Id: I052330eb8689883c104a0552708ea700c7cd790a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Improve test coverage for QPoint and QPointF.
Separate QPointF tests into their own project.
Change-Id: Id28dc5b85aba9fc179d87b2bca1d99854f27a5ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
