Set QT_TESTCOCOON_ACTIVE environment variable when the coverage is installed
for a test and unset it when the coverage data is saved. Tests that run when
QT_TESTCOCOON_ACTIVE is set are subtests and will not be considered as
stand-alone tests for the coverage.
When a test is run as a subtest its coverage data will not be saved for
itself but for the main test it is merged with. Also its status will not be
reported since only the status of the main test is expected in the test report,
e.g. the test tests/auto/testlib/selftests.
Change-Id: Icfdf99300aae18040e1a3441a8af21f68df4c0db
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
And fix documentation of toString() which said this was the method to
use for displaying to humans, while this has never been true.
Change-Id: Iff6df92e32b2517e1481d4992d80cae2d58da427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Do that by keeping the QWeakPointer that track QObject independent of
the ones that track QSharedPointer.
QSharedPointer do not touch the sharedRefCount in QObjectPrivate anymore
When converting a QWeakPointer constructed from a QObject to a
QSharedPointer, it will display a warning saying one should not do that.
Task-number: QTBUG-22622
Change-Id: I3595e3e7401702410776c458687ab357ad9366ab
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add QEventLoop::ProcessEventsFlags test data for
tst_QEventDispatcher::sendPostedEvents() to test that posted events are
sent when waiting for events and when not waiting.
Change-Id: I99f9eb121d0b1ded725e19c5233922fc0a6b81e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This will test the event dispatcher in corelib for proper timer and
posted event handling. The test makes sure all of the necessary virtual
functions are implemented and working as expected.
This test doesn't test socket notifiers or Win32 event notifiers, as
these are already covered in existing tests.
Change-Id: I5540ffc4e6d7f97bcd6c3725d7e74c0ab9c97015
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Next step is to remove navigate(), but that has to be done in
qtdeclarative first.
Change-Id: I01ea1386c092446be04cc19d0f70adf53f094adc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SVG support is now handled in QtSvg. Previously this test code would
normally be skipped when testing qtbase. This code is only executed
when testing qt5 with QtSvg enabled. This code will be moved to QtSvg.
Task-number: QTBUG-22360
Change-Id: I7372012469f9c0f9b7d3851a0ae696f8f935ba10
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed unload_after_implicit_load() to use full path
- Turned off app_bundle
Change-Id: Ibdf3ae0dc833d97eba64298715eb88c70408fff6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Only run invalidConstructs() tests if not cross compiled
Change-Id: If99fccdf9bca339507ca60c49aa89dc35c535d3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
This fixes a minor bug in VisualIndex triggered when calling
resizeSection with size 0 (but not hideSection).
It is mostly cosmetics - however hopefully there will soon
be a minor refactoring and there is really no need to make
strange code to keep a semantic bug.
However it is also doubtful to make a semantic change
while refactoring.
Change-Id: Ide153e421fd7a634062cb74867f4a49da4bf9cd6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QVERIFY2 and gracefully fail with an error message, rather than
crashing, if getgrgid() fails.
Change-Id: I82a7290f83208486577988cc831d5d3cba20f98e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The test was failing at:
QCOMPARE(property.userType(), qMetaTypeId<CustomType*>());
The CustomType* metatype was not registered before this part of the
test.
qMetaTypeId<T> will register the metatype for T before returning it if
it is not yet registered, while QMetaProperty::userType() returns 0 if
the metatype is not yet registered. However, the order of evaluation of
these two expressions in the above statement is technically undefined.
Apparently, gcc evaluates the arguments in order from right to left,
allowing the test to pass, while clang evaluates the arguments in order
from left to right, causing the test to fail.
Change-Id: I5059556e860cec29b57c31e4e26f46cf9e6055da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
- testCustomRuntimeDirectory test skips if run as root
Change-Id: Idcc2a1db5d8a96b2ec0248b8b1c392fffc0b2e11
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Added checks to see if running as root and skip as needed
Change-Id: I4f94d5bfe511c6dfda315854b7cd1f64efe6e4f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When run as root was able to move file to /etc directory but was
expecting a failure.
Change-Id: Ic2ac5506253f2a3395ed56e88a856542bf82ad6d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Correct a bug in the test and use unique names for data rows. The bug
was that the test assumed that QCOMPARE for float values 100001 and
100002 would fail, but it actually succeeds. QCOMPARE for floats uses
qFuzzyCompare(), which succeeds if the numbers differ by no more than
1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes,
while QCOMPARE(99998, 99999) fails.
Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of the subtests are only run with plain-text output format. For
those subtests, the other output formats were unused and gradually
becoming out-of-date.
Change-Id: I4c10f7f5bab2d2cc7d2d2ad641fbf5d4df02b798
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Our OSX 10.7 test machines send a SIGILL rather than a SIGSEGV to a
process which attempts to dereference a null pointer.
Change the "crashes" test to dereference an invalid pointer with a
value slightly greater than 0 so that we get the same crash behavior on
all (unix) platforms.
Change-Id: I700a2c7d654a9468af5e5996010a258695ed2ae5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To hide the IsPointerToTypeDerivedFromQObject monstruosity :-)
Documentation for Q_DECLARE_METATYPE and qRegisterMetaType was updated
to mention requirements on registered types and how they can be
circumvented for pointer types with the new macro.
Change-Id: If83b037a8e2f28761eb903525e87008107298801
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is possible to do this for example:
QVariant v = QVariant::fromValue<MyCustomQObject*>();
QObject *object = v.value<QObject*>();
This means that if a QVariant contains a pointer to a QObject
derived type, third parties can extract a QObject* and use its
properties without knowing the concrete type.
This is a source compatible change.
Change-Id: Iee9a9437e99cc2f40d1a4bfea47275482ef7161f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Previously, if any fields in the supplied record could not be matched
with a column in the target table, dataChanged() was supressed for all
columns for OnManualSubmit. This is not good because it prevents other
views from noticing the fields that *do* change.
It's simplest and probably more efficient just to emit
dataChanged() once for the whole row. Fewer signals need to be
processed and in typical cases much or all of the row is likely to
be changed anyway.
Change-Id: Ib56bf9a18e51b9cb85771acefcb2bf26e295a54e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In an apparent attempt to be economical with emitting dataChanged()
and submitting SQL to the databse, setRecord() compares each field
value of the record with the old value, taking action only when
a difference is detected. Several complaints against this code are:
-The comparision does not work on float type.
-It is really up to the application and database to decide this. The
model should make few assumptions. The application has the option to
omit fields from the record that should be ignored.
-The current behavior seems to assume that the "old" values are the
current state of the database, but the database may have changed since
the model was last refreshed.
-The code compares the value from record(), which probably
corresponds to the EditRole, with the DisplayRole value from data().
Change-Id: I11477c185eb411d442144dc682893d0df12d03d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When text has been selected in a QTextEdit and the left or right arrow
key is pressed, the cursor moves one character beyond the start or end
of the selection, when it shouldn't move past the selection. Fixed by
moving the cursor to the right place when a selection is active.
Task-number: QTBUG-22853
Change-Id: I9ea1863436db98627a6fd041ce554cf10be26493
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
(cherry picked from commit 1b031759ddfdab9703dfecac13f1ed318da3dafe)
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
QMetaObject::invokeMethod attempts to deference the extradata for
meta objects versions 6 and greater which is causing a crash in some
of the qtquick1 tests.
Change-Id: If5b2ca83b15de2cd558976c6b681dd5457c404d1
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Correct the implementation of cutText and copyText in QAccessibleTextEdit so
they use cut() and copy() methods of QTextEdit
Cherry picked from Qt 4 - 36202cf8fca822492615d418bd563a40bee4af08
Change-Id: I86a531ed7059b1a928cb8515c2743d4d8b596b36
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Previously, ignored messages were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data row in a data-driven test function didn't cause all of the expected
messages to be generated, the remaining messages would be carried over
to the next data row. This would result in errors about missing
messages being associated with the last data row rather than with the
correct data row.
This commit makes testlib check for missing ignored messages after
running each data row rather than only doing so after the last data
row.
This commit also adds a regression test to demonstrate that ignored
messages can no longer be carried over from one data row to another.
Change-Id: Ibee51aa6e96866fbcbcb4acee1a8340a86a6a4ba
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, expected failures were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data-driven test function called QEXPECT_FAIL and then didn't perform
any further verification steps to trigger the expected failure, the
expected failure would be carried over to the next data row, probably
causing the first verification step in the test function to XPASS (with
a seemingly irrelevant error message) for the next data row.
This commit adds the new function QTestResult::finishedCurrentTestData()
to cleanup after each data row is executed. This function treats calls
to QEXPECT_FAIL without subsequent verification steps as a test failure.
This commit also adds a regression test to demonstrate that expected
failures can no longer be carried over from one data row to another. If
run against the previous version of testlib, the new test would report a
pass instead of an error.
Change-Id: Ida5c7f080815b0dca9531131fed582b0918334cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWidget::isActiveWindow() was being checked in QAccessibleWidget::state
to determine if a widget is focusable. As a result, focusable widgets
were reported to be not focusable when the window was not active.
Change-Id: I73c47181ed132a84f0251cb67d0e20912e29a1a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.
Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.
(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)
Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Qt 5 seems like a welcome opportunity to stop emitting this
spurious beforeDelete signal.
Change-Id: Ib8628343ca9b8fdd85c154a206c7e2bf2c4c9dc1
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The open test case tests opening a device path on windows.
As this requires privilege elevation, the test fails when running
nmake check from a console.
As the CI machines appear to run tests with admin privileges, first
check opening the device using the windows API. If that succeeds, then
opening using QFile should succeed. If that fails, the opening using
QFile should fail.
(Since Windows vista, members of the "administrators" group do not run
at elevated privilege all the time. The user needs to opt in via a
UAC prompt or "run as administrator". This is similar to using the
sudo command on unix)
Ran the test as administrator and normally. Now passes in both cases.
Change-Id: Ibd7682eceb61e35d4912fa0392df536f4331f6ed
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Simplified the raster engine by treating image formats in a more
generic way and removed some unused code.
Change-Id: Ib3979a1a6e3e6f17c5002248545779ec36fff7c9
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QMetaType used to register a typeName and factory functions for
creation/destruction of objects. While it would be possible for a single
type name to be registered matching different actual types and memory
layouts, there was little that could be done about it.
Now that QMetaType is tracking type information with a direct impact on
data layout and ABI (size and type flags) it is important that we check
and detect binary incompatibilities as early as possible.
[Such incompatibilities could arise from type name re-use (technically,
ODR violations) or, more commonly, as version mismatch between different
shared libraries or plugins.]
Only type size and flags are checked as function pointers to inline and
template or otherwise non-exported functions could trivially differ
across translation units and shared libraries.
When registering typedef types, a check is made to ensure the same name
doesn't get registered as different types.
Change-Id: I8211c3de75d4854ce8fafdb620d3a931c206e0c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The function hasn't been working properly. It was not well tested, for
example it is undefined how QVariant should behave if it contains an
instance of an unregistered type.
Concept of unregistering types was inspired by plug-in system, but in
most supported platforms we do not unload plug-ins.
Idea of type unregistering may block optimizations in meta object
system, because it would be not possible to cache a type id.
QMetaType::type() could return different ids for the same name.
Currently QMetaType::unregisterType() is not used in Qt.
Change-Id: I878b6e8d91de99f9bcefeab73af2e2ba0bd0cba0
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
There is no point in keeping separate values which should mean the
same.
QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.
Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.
Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
The QNetworkReply finished signal does not have a bool parameter.
Change-Id: I87bd0410545f7a2fc2ab63cca90548f0585bf7a0
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ic958c4e5c15dd53a48479099b6b07803af6cb789
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ifceaff4c5a7f1b6408ec57196298e3f3038910c9
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Updated copyright year, per 1fdfc2abfe
- Updated contact information, 629d6eda5c
- Drop "All rights reserved", 5635823e17
(Empty line added to maintain license header line count)
Change-Id: Ie401e2b6e40a4b79f4191377dd50dc60be801e1f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As discussed on list and approved by Lars and Thiago.
Make QSystemLocale private to give us time and space to change it to a
better implementation.
Change-Id: Ifd806972f3996c43a876f544f78c6557ad71cd75
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Ensure consistent conversions by not using the system default locale.
Change-Id: I60db9fc4f465c0254f3213419e57d7879aaddd65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QByteArray is declared as movable but it was not tested before.
Change-Id: I4fb636f8705c3fd792a768872206203ee5fd4ddb
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Convert QDate to only use Gregorian calendar and not Julian calendar
before 1582. In future the Julian can be used via proper calendar
classes.
Change-Id: I547a3550332057a0ab1be616706630b6afaceffc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the QDate Julian Day number as an qint64 instead of uint32 to
enable support for dates before 2 January 4713 BCE. This changes the
possible date range to be approx 2.5 Quadrillion BC to 2.5 Quadrillion
AD. A qint32 was not used as it only covers 5 million BCE to 5 million
CE which does include Geological or Astronomical time.
The effective supported date range is currently 4800 BCE to 1.4 million
CE due to restrictions in existing conversion formulas. The effective
range will be extended later with new formulas.
Change-Id: Ib4345369455b31d4edae8c933b7721e76414e914
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmetaobjectbuilder should generate meta-objects of the same version
as moc; in the future, when the moc version is bumped, QMOB has to
be adapted at the same time.
QMOB was generating version 4 meta-objects. This patch makes it
generate version 6 (the current version). This also fixes a bug with
using qt_static_metacall with QMOB (setStaticMetacallFunction()); it
was already using the version 6 qt_static_metacall signature, which
isn't compatible with version 4.
Also add tests that ensure that the QMOB-generated meta-object works
with real objects; in particular we want to test the codepaths in Qt
that check for version >= 4.
Change-Id: I64a151ea5c947a6f8b7a00e85a39866446c735e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The 'real' datatype should be seen as a QVariant::Double type and not as
a QVariant::String type otherwise it does not get presented correctly
when using a non Qt application to access it.
Test is included for QSqlQuery.
Task-number: QTBUG-16373
Change-Id: Ie323ce49eb95e4d6bb4c3814ba9a957a63f4b259
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
(cherry picked from commit b23631015c23a49e3b4d296ea0a6266bfce3d4f1)
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This has only been around as compatibility interface for Qt4
but is now replaced by QPlatformInputContext.
Change-Id: I677dbbea46311bf39f6c5ca9dc3fb5009abe924a
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Use source file location as working directory for externaltests
Change-Id: Ic05259f48eece920b348ccbde9ba80c90dedfdd2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This file was removed in commit ba9302b8a9.
Commit 8fad23f326 removed openssl.pri from
src/network/ssl/ssl.pri, but not from the qsslsocket autotest.
Change-Id: Ic1a576ee7f0ee3d68471121ba636b94ce7bae455
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to keep binary compatibility, Qt 4 introduced V{2,3,4}
classes for QStyleOption subclasses. They're simple, low level
containers for various members with public access (no accessors
required).
In Qt 5.0 we can break BC, so this patch moves the members
from the derived classes into the ``base'' ones.
The ``base'' ones get a version bump matching the highest
version available, and the V{2,3,4} classes become typedefs.
This change can cause problems in code that used QStyleOption
directly, especially QStyleOptionViewItem, because the old V4
fields get default initialization but the QStyle subclasses
detect that the option is a V4 option and expect all fields
to be properly initialized. The fix in such places is to
properly initialize all fields.
Task-number: QTBUG-23522
Change-Id: I2f782da09ca5cc8c4cbafc07448fb0d33153a251
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made QString::operator=(QLatin1String) work in that case.
Change-Id: Ie77eabd2f8f036531d67cd8051a7b6305b386ccf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QTextStream and QDebug << operators work in that case.
Change-Id: I94d051ce2ebfb2d2a403b96d25e040c80a54bf7c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QString(QLatin1String) constructor work in that case.
Change-Id: I4f4f07a956144b7ea4aa9c58a61c755fb99ef1b3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QLatin1String comparison operators work in that case.
Change-Id: I234ba851e67a6f5cfbb46fb6f0b22623ce40be28
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QInputMethod better describes what the class is about, input methods
in general, be they panels or just composing input from key events.
Compatability headers added for old name. Not bulletproof but should be
enough to get transition done.
Change-Id: Iefde6e7ccb1ec4a3b226cef3469089e751c60fc1
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
- Needed to add toLower() for compare as c:\ and C:\ was causing
a failure.
Change-Id: Idd55774d118b7249e88362688166b4f9d9712c7c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to set working directory based on subprogram
stdinprocess's directory location.
- Changed QProcess execution of subprograms to use
relative paths.
Change-Id: Idbccca635f0f61adba9721bcceeceb0a8a961dcf
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rename some of the test functions to improve consistency, and change the
order so that all the xfail tests are together (some new xpass tests
will be added later).
Change-Id: Ice1ac5bf61bc26109bb0d08f72eb74e1a0424101
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test simply generates each possible pair of Pass, Fail and Skip
results. At present the test simply serves to demonstrate the current
shortcomings of testlib's plain text logging, namely:
* If a test function passes for all data rows, that is counted as one
pass, but each skipped or failed row counts as one skip or fail.
* Only skipped and failed rows are reported individually in the test
output. Passed rows are not reported, so it is impossible to see how
many rows were executed.
* A skip followed by a pass will be reported as an overall pass for the
test function, but the same rows in reverse order will not report any
overall result for the test function.
Future commits will attempt to correct these problems.
Task-number: QTBUG-22124
Change-Id: If8c7ea15fc43ba9a1bccd0e881c1efc18e705b25
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qtextbrowser unittest to use TESTDATA and QFINDTESTDATA
Change-Id: I0ac7c990640d492d5ec94f5824c022a2b5075103
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qlabel unittest to use TESTDATA and QFINDTESTDATA
Change-Id: Ide6755cd79caf91b553fb6b1412da6fbab583720
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This provides a stronger mechanism e.g when inheriting QItemDelegate.
It makes some things much easier e.g avoid delete of an editor
and maybe only delete depending on what the editor says itself.
This introduces a new virtual function.
Task-number: QTBUG-2299
Change-Id: I8410f8199775987dbacffd99e4c354fdadcdd21f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a test that verifies correct behaviour of qheaderview.
It includes test of swapSections, moveSection, rowcount-change,
resizeSection, hideSection and position lookup.
Change-Id: Idc1fe8167f2d95dee5c5b1161cb633cbf9495d17
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There isn't a good reason to impose the additional library call and
using the shared null here matches existing behavior in QByteArray,
QString and QVector.
Change-Id: Idd0bb9c7411db52630402534a11d87cbf2b1e7ba
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
- Always use <qt_windows.h> as the last file to be included.
- Remove it from some headers, use Qt::HANDLE instead of HANDLE.
- Clean up #ifdef, use Q_OS_WIN for Windows/Windows CE.
- Add NOMINMAX to qt_windows.h to avoid problems with the
min/max macros.
- Remove <windows.h> from qplatformdefs.h (VS2005)
Change-Id: Ic44e2cb3eafce38e1ad645c3bf85745439398e50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Record the file, line, and function where a qDebug, qWarning, qCritical
or qFatal call happens, and make this information available in a custom
message handler.
The patch uses the C preprocessor to replace qDebug, qWarning, ... with
a line that also records the current file, line, and function. Custom
message handlers can access this information via a new QMessageLogContext
argument.
Change-Id: I0a9b89c1d137e41775932d3b1a35da4ebf12d18d
Reviewed-by: David Faure <faure@kde.org>
This patch removes the posibility to call resizeSection
with negative sizes.
Sections with negative sizes affect the other sections,
and it does not seem to have a useful, well-defined semantic.
The length can also become negative - and visualIndexAt
work strange.
Change-Id: I632beb160649fa10e2106314557b8c5a106aa3cf
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
A feature of a ref-counted quit (managed by a quit-lock class)
is added to both QEventLoop and QCoreApplication.
This allows, for example, an event loop to quit() when there is
no more work for it to do.
quitOnLastWindowClosed is implemented in terms of the refcount in
QCoreApplication so that jobs can be completed before the
application quits.
Change-Id: I14c8f4e7ee12bbf81a6e5849290d4c8ff37fa110
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
A QImage can be constructed with a provided buffer, that has to be
kept alive for the live-time of the QImage and all its copies.
Frameworks like CoreGraphics or Cairo offer a similar method of
creating image objects and also offer the ability to provide a callback
function that is called when the image is destroyed.
This patch adds this functionality to QImage by extending the
QImage constructors that take a raw image buffer pointer.
Change-Id: Ia6342408c560ef49b498c9e4664b4602febb0fcd
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Commit 4b8ceb41ae added the requirement
that pointed-to types need to be registered when registering pointer
types. Unfortunately, the implementation also affects function pointer
types.
This change whitelists 0, 1, 2 and 3 argument functions as not deriving
from QObject, forgoing the need to workaround details of the type
registration implementation when registering those function pointer
types.
Change-Id: I4d855e9d70a8179a6e31b84623ad5bf063e0d6d8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove methods that have been marked as deprecated
before Qt 4.6. Keep others, but inline them
where possible and mark them as QT_DEPRECATED_SINCE(5, 0).
Change-Id: If881821ae095f054b31cc13464f19e2007c20ed7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This allows QStandardItemModel to be usable in QML without requiring
clients to subclass it.
Task-number: QTBUG-15067
Change-Id: I867fcd8137132affdf21f37a9fa293e855a09a13
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As discussed on the development mailing list, the window list returned
by QGuiApplication::topLevellWindows() included all QWindows, even the
non top-level ones.
This commit introduces the new method allWindows(), which returns the list
of all QWindows, fixes the list returned by topLevelWindows() and also
introduces tests for both methods.
Change-Id: I761f0fcdec79f83949012c628655ed12cd18572c
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QIntValidator and QDoubleValidator used to accept C formatted input if
the input wasn't valid in the default locale. This change removes this,
only the default locale is now used.
Change-Id: I8b2d8f9f3849abe3fcb5c12083aae542a76eaf90
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Change-Id: Ife590b7639f4aadcfbd4d77ca170285b623c14ae
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
- Changed to use TESTDATA and installTestHelperApp()
- Changed to use QFINDTESTDATA instead of currentPath()
Change-Id: Ia24ebc758d5d0fdfcca951500766adefbcf9fe93
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed unittest to use QCoreApplication::applicationDirPath()
instead of QDir::currentPath().
Change-Id: I398f7ea8b4426be85432d0eb3767ef6d59488d0a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added check to testLocateAll() to check count() before calling
first().
Change-Id: I04e93c1f913972b26c517f2bbd08760f9898cc7a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qsplitter unittest to use TESTDATA and QFINDTESTDATA
Change-Id: I5db0fbfb20e6bd0ec169e884f16c1ec819f4e449
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Two cases of image.png not being found when run from install directory
Change-Id: I5f20b7a0ea0b120ce06c556b83bc20dd658a4f83
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- jumpToFrame() updated to use QFINDTESTDATA
Change-Id: I1b5ff92722e389e714eb58b37996f3e933e95489
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Check the validity of date/time before attempting to perform maths.
Change-Id: Ia6a2caf07c6c36f7d7fac713a77bc4eb456c6ed6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A few methods in QString still assumed that QLatin1String
is always 0 terminated. Change this to rely on the size
provided by QLatin1String instead.
Change-Id: I9145a46e52ed8811f3b4e3d72d8a81a12588760a
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Open the comparison file as text mode, so that it does not differ from
the dumped certificate in CRLF vs LF line endings.
Change-Id: I54d6ea6e37044059e89e762435657ebf5fa6cb39
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been broken for months, but invisible because the code causing
the link error is unreachable (due to QSKIP). So the link error only
occurs in debug builds with -O0.
Change-Id: I6093a7803bedf37bfc8c2d9ff0b28b2309b57959
Reviewed-by: Richard J. Moore <rich@kde.org>
If the object is null, simply return an empty variant map.
Added another test case checking conversion from QJsonArray
to a QVariantList.
Change-Id: Ieccd163e76630f7db7f41255acd9d1baf66bb38d
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
QVariant::UserType does not correspond to an actual type named
"UserType". This logic didn't make sense.
Change-Id: I369911e514f7902fc863cb05174011d6fc15c447
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The QDnsLookup class provides asynchronous APIs for performing
DNS lookups. For now, the following lookups are supported:
- A and AAAA
- CNAME as defined per RFC 1035
- MX as defined per RFC 1035
- NS as defined per RFC 1035
- PTR as defined per RFC 1035
- SRV as defined per RFC 2782
- TXT as defined per RFC 1035
Task-number: QTBUG-10481
Change-Id: I46c1741ec23615863eeca3a1231d5e3f8942495e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can be used by views to indicate whether a drop is allowed (eg
adequete permissions in a filesystem model).
Change-Id: Iefedb5399e44c8edc5f5df1403c8d5c0da618612
Reviewed-by: Peter Penz <peter.penz19@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
setSectionHidden called with (logindex, true) will
sometimes prevent a (correct) call to
resizeSection(logicalIndex, 0).
This seems a bit odd - however it does execute
d->doDelayedResizeSections().
Therefore the section is going to be hidden later.
However it is a problem that the length meanwhile is wrong.
(That is a value that is not the sum of the sections)
This is fixed by execute updates before returning the
length.
Task-number: QTBUG-14242
Change-Id: Ia1d2f6db3213792b250a6a37942b56554261cd3a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
File system cached metadata can't be trusted when custom file engines
are in use, because the custom file engine may want to override the
metadata. (e.g. present an archive file as a directory)
Therefore, check if a file engine should be instantiated for each
result in QDirIterator. This is a fast check if no custom file engines
are registered.
When pushing a directory (using QDirIterator::SubDirectories) the
file engine needs to be instantiated also.
Task-number: QTBUG-23688
Task-number: ou1cimx1#965023
Change-Id: I0114c8df6258535553783a2486131c4194926649
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
(cherry picked from 3864ad09d578210b52e5f58fca2ee8a1144f5be2)
In QMetaType "void" is a regular type, lack of c++ sizeof operator
force us to write a template specialization for the type.
Change-Id: I9a56e135223b416b8031836d29ef33ef3fb750e4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
These types don't exist anymore, so it's pointless to check for them.
Also remove the dead types from uic's type-to-header map.
Change-Id: I7f0af5c337859f3da1c103157a802bbe5372df9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Some objects expect connectNotify to be called in order the signal to be
emitted.
Change-Id: Id0460d9c2aef8f9c3618a2b62b2119a790e06f30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
setEncodedUrl() isn't necessary anymore now that setUrl can handle
encoded (and partially encoded) urls.
url() is added for symmetry with setUrl().
Change-Id: I4e671482a5635a86797421ca50882db9cd60d852
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes round-trip bugs. People expect to be able to do
QUrl u(...); QString s = u.toString(); QUrl u2(s); and have u==u2.
This was not true for paths containing a '#', for instance, which would
be parsed back as a fragment. The solution is to make toString output
partially decoded data (more readable than toEncoded, but not decoded
to the point of changing the meaning, if parsing it back later as a
QUrl), and to make the QUrl constructor work with partially decoded data.
Change-Id: I013c01e8947d538435f3c20fc4ec57cd9ccbba6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moving away from deprecated QInputPanel inputItem.
Small behavioral changes:
- On focus proxy widgets, disabling WA_InputMethodEnabled on
proxy will no longer disable input method for proxy target.
- setEnabled(false) on proxy widget will no longer disable
input method for target as a special case.
Change-Id: Ifb5b7144d29bd3aefdde7cf4a0bd396db06e67e2
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
* Deprecated QInputPanel::inputWindow() which is already
just returning QGuiApplication::activeWindow()
* Deprecated QInputPanel::inputItem() and introduced
QGuiApplication::focusObject(). Input methods can check
input method support by Qt::ImEnabled query.
Change-Id: I70a9c1c3f79aadb75c839d0489a9428f7a221df5
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Implement the public slot QWindow::close() and add the correspondent test.
Change-Id: If3f07cce3b26640f06fc52d0e4dca875d9894b3d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QLatin1String now has a constructor that takes explicit length, which makes it
possible to create QLatin1String that do not have null-termination character.
Fixed QString::operator> and < to be safe in that case.
In the same patch fixed qtjson which had operator< implemented in the same way.
QString::compare(QLatin1String) is still broken and will be fixed separately.
Change-Id: I48ec1183a6f44034129cc17312af854795085408
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The extra bool arguments weren't needed in the first place as they
specify the default, but were left behind when allocate parameters were
changed from bools to AllocationOptions.
Clang saves the day by pointing out the weird conversion going through
void ** (!?)
Change-Id: Ia0dafce06bf0ee62bd825a2db819c890343b6342
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
If T is defined as a metatype, then QList<T> is too automatically.
So for example, no need to use
Q_DECLARE_METATYPE(QList<int>)
anymore.
This is a source compatible change.
Change-Id: I2ee8a7b9e28fe6d4775f6a05cce39aca8563e0c5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
To match the previous QWindow::orientation() property which can be
useful to access from QML. Also, removed the automatic translation of
Qt::PrimaryOrientation to QScreen::primaryOrientation() on the QWindow
level, as it leads to a lot of complexity regarding the
QWindow::contentOrientationChanged() signal, and makes it hard to
distinguish between the case where the window's orientation follows
that of the screen, and the case where the orientation just happens to
be set to that of the screen.
Change-Id: I6950d1337b7f929815eff1328181855090d8066b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Fix a couple of cases where WildcardUnix was not matching when the
string was just [] or ended with a \.
The testWildcardEscaping() test has been extended to account for these
two cases too.
Integrate 7ce3726aea4be2dfdb57966a4482f66fec6f8f57 from 4.8
Task-number: QTBUG-20897
Change-Id: I7a07ac008473fa7a080db752e189f6404842603f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtWidgets and QtDeclarative now both have their own versions of these
so there's no need to keep them around any longer.
Change-Id: I9c2201c8495a0a0816e2af16c8f647fcad991479
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There is no reason to keep two separated core types sets. It
couldn't be fixed before Qt5 because of binary compatibility promise.
This patch merges QMetaType core types with ext core types.
This "simple" operation consists of:
- QDataStream version was incremented, because type ids are
saved in QVariant's data stream.
- QMetaType LastExtCoreType and FirstExtCoreType were replaced by
LastCoreType, FirstCoreType and new QMetaType::HighestInternalId.
- New tests checking QVariant data stream for Qt4 and for Qt5 versions
were added.
Change-Id: I02dd74d29317365c297a789a4eb7c9c5edc3b231
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This provides the same functionality as the specialized QStringLiteral
and QByteArrayLiteral, but on top of QArrayData.
The macro has two variations, variadic and simple. The variadic version
depends on compiler support for (C99) variadic macros and enables
static initialization of arrays of any POD data. Use of this macro is
not recommended on code or applications that need to work in
configurations where variadic macros are not supported.
The simple version is more portable and is enough to support the use
cases of QStringLiteral and QByteArrayLiteral, also providing a fallback
that allocates and copies data when static initialization is not
available.
Change-Id: I7154a24dcae4bbbd7d5978653f620138467830c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
pause and resume is currently only supported upon emitting the
QSslSocket::sslErrors() signal. The API was added in QAbstractSocket to
also support QAbstractSocket::proxyAuthenticationRequired() in the
future.
This is the first patch to support that feature on the socket level,
another patch will follow to support sslErrors() and
authenticationRequired() in QNetworkAccessManager / QNetworkReply.
Task-number: QTBUG-19032
Change-Id: Ide2918268590ab9a01454ab26cb7fdca3dc840ab
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.
Keep a QT_MODULE(x) define so other modules continue compiling.
Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMetaType::QVariant has existed as a proper type for almost two
years, but the qvariant_nameToType function was written in 2006.
Using QMetaType::QVariant means QVariant can be treated just like
any other type. We can get rid of those hacky checks for LastType,
and the remaining checks become more readable.
The fact that QMetaProperty::{type,userType}() returned LastType
(0xffffffff) for QVariants was never documented (LastType itself is
internal). But there are other Qt modules that assume so. I'll fix
the ones I know about (qtdeclarative, qtscript, activeqt).
Change-Id: I799b9079bb8bbb1fe76c132525440b30415cbac5
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This provides a general notification of changes that may change the
validity of previously validated input.
Change-Id: I5ec6f127af60fdca68605fee903a08758bc01360
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
We want the autotests for the QtWidgets library to be run on Mac OS X as
well.
Change-Id: Ie731b802b64222c84116e2df82f536acf4971565
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The existence of QAbstractItemModel virtual methods
moveRow, moveColumn, moveRows, and moveColumns
is implied by the existence of
beginMoveRows, endMoveRows, beginMoveColumns and endMoveColumns.
However, these were not actually provided by QAbstractItemModel.
With this change, subclasses can implement support for moving rows
and columns following the same pattern as for insert* and remove*.
Change-Id: Iad8b2223d4b9303abb6459c174a82ffed71a0fdf
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If we request a substring starting at the very end of the string,
QString::mid should return an empty string, not a null string.
For instance, QString("abc").mid(3, 0) used to return a null
one, while this patch makes it return an empty one. The
same thing applies to QString::midRef() and QByteArray::mid().
Change-Id: Ie9efd7a0622d429efd0fb682c19856c19e9469af
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously we only had QWindow::setOrientation() which was a hint about
the orientation the window's contents were rendered in.
However, it's necessary to separate between the orientation
corresponding to the window buffer layout and orientation of the
contents. A game for example might typically want to use a landscape
buffer even on a portrait device. Thus, we replace
QWindow::orientation() with QWindow::reportContentOrientationChange() and
QWindow::requestWindowOrientation().
Change-Id: I1f07362192daf36c45519cb05b43ac352f1945b5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This imports the JSON support for Qt 5 from
playground/qtbinaryjson.
It adds a fast, fully compliant json parser, a
convenient C++ API, conversion to and from
QVariants and a binary format for JSON that is
extremely fast to use together with the C++ API.
Change-Id: If9e3a21a4241d388d0abaa446b6824f9cc6edb1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a source incompatible change for Q_DECLARE_METATYPE(T*),
which now requires T to be fully defined.
The consequences of this are:
* Forward declared types can no longer be declared as a metatype.
(though this is a very uncommon thing to do).
There is a trivial workaround where necessary.
Change-Id: Id74c40088b8c0b466fcd7c55abd616f69acc82c8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
URL schemes can only contain alphanumeric characters and all
protocols specify that they are case-insensitive. So instead
of doing case-insensitive comparison everywhere and then get
it wrong sometimes, better to lower-case it here.
Change-Id: I61f51a3f4c85b90af1586ebcf69608987fbe2ec3
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For asynchronous (overlapped) I/O notification on Windows one
can now use the convenience class QWinOverlappedIoNotifier.
It's using one global I/O completion port and a watching thread to
get notified when a read or write operation completes.
Change-Id: If6f904b364be0405580c7e50355529ab136ae3cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The previous patch missed this, which was hidden inside #ifdefs.
Change-Id: Iba1417d4191b6931afb549022768f3e3a2cf727d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- qtextdocument unittest to remove foo.png after test.
- qtextdocumentlayout unittest to remove expected.png and img.png after test.
Change-Id: I42971e9128d399cadc87b9fd345c868065f180a9
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Removes temp_image.png after test run.
Change-Id: I0b233609c2bbf57151cf173181a40738d934f0ec
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Removes test.xml after test completed.
Change-Id: I548e2d644cca8ae0d30c3002df45cf57433170af
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The C++ standard says that the comparison between pointer to virtual
function is unspecified (C++11 $5.10.2)
But we still may rely on it for the Qt::UniqueConnection and the
disconnection
So test if it works while using the same function.
Using function from different classes works for me, but we should
probably not assume it works. I left it commented in the test for
reference.
Change-Id: I1d9b91d4cc1a424d4f43ef2ee4981b8573f1e86f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
, as those are going away.
The comment in QString/QByteArray::squeeze about shared_null was updated as it
also affects other static data, such as that generated by QStringLiteral and
QByteArrayLiteral.
Change-Id: I26a757d29db62b1e3566a1f7c8d4030918ed8a89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This flag has been deprecated since Qt 4.4, so remove it.
tst_QApplication had 2 nearly identical tests, one for testing the
QEventLoop::DeferredDeletion flag, and one to test sendPostedEvents()
with QEvent::DeferredDelete. The latter is the preferred way, so keep
that test, but remove the test for the obsoleted flag.
Change-Id: Icdb7483c32b3c920bda31d2bbb4f7414ece6d826
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Qt::WA_UnderMouse is not working at the moment, causing this test to
fail.
Task-number: QTBUG-23685
Change-Id: If167311b09ba8fc3d04d056590588b595825c443
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test currently fails on Mac, mark it as insignificant.
Task-number: QTBUG-23681
Change-Id: I7355cda953966778d651fafaff837f1083eeb3f4
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test currently hangs, preventing the autotest from finishing.
Task-number: QTBUG-23677
Change-Id: I3c5f56c10735d65fb35de4e22a1e2e6414532309
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The shortcut0 test data fails, indicating that keyboard navigation via
shortcuts doesn't work on Mac OS X for the time being. Mark the failure
as expected.
Task-number: QTBUG-23684
Change-Id: I199222a87c09e6f491e5dcd21c9f65c28ecbb86d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QStyleFactory cannot create the Mac style, so skip the test for now.
Task-number: QTBUG-23680
Change-Id: I2ae61aab152cd8a4e6a7270902df40dd3cc6df3b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This tests has numerous failures on Mac OS X, ignore the test for now.
Task-number: QTBUG-23674
Change-Id: I29bcfd379a6a13f9859e96c5cc6dc7e932feaf4a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Mark current failures as expected.
Task-number: QTBUG-23679
Change-Id: Ic574dbb0fea3a21ef9963ef16bdf85da4c809036
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
There is no guarantee the touches will be listed in the same order in
an update: the platform/generic plug-in, the drivers, etc. are all
free to shuffle the list of touch points in each report (even though
the order is fairly stable with most systems).
Therefore, to be safe, move and release events should be generated not
from the first point in the list but from the one with the matching
id.
Change-Id: I6615224cbf2cfdc440143eb3191482a23d85c6a4
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This test no longer fails:
XPASS : tst_QFiledialog::selectFiles() '!listView->selectionModel()-
Loc: [tst_qfiledialog.cpp(915)]
Change-Id: Ib790c0f81b3d383117cceceaacbf0c3d6a673404
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Allow new failures in this test to block CI.
Change-Id: I1c7e797740be2f77f82d00943f6f2018b686481f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
tst_QGraphicsWidget::updateFocusChainWhenChildDie() currently fails due
to what appears to be window activation.
Task-number: QTBUG-23699
Change-Id: I404f90d32dba64d558598d97cf805b6c025e6456
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These tests now fail with XPASS on Mac OS X, so remove/skip the
QEXPECTED_FAIL(). Unfortunately we don't know which commit fixed this.
Change-Id: Id919a2c9d56fd7c4dee8ccb8aa3293efdce603b2
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
tst_qwidget.cpp will not build/link without tst_qwidget_mac_helpers.mm,
so re-add it to the build as well.
Change-Id: I55130f62c215c4b82683d90456e31fdb09f833a8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This test sometimes gives different results on consecutive runs, and is
therefore insignificant for the purpose of regression detection.
Task-number: QTBUG-23837
Change-Id: I8747972c5cb7952089c54cbd22e1660db551e2f5
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Replace the QDom based code in qdbusxmlparser
with code using QXmlStreamReader.
Task-number: QTBUG-20856
Change-Id: I294e3ebd6faa813c20806be3ae225ac00befb622
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has long since been obsolete in code and removed from the documentation, but
was never marked QT_DEPRECATED. Do so, and inline the implementation.
Change-Id: Ic7bfdaf76269b7f9addeba83e64bc9525c581dda
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add spaces where necessary, and pull braces back to the same line.
Change-Id: If543686c9727a110f8a91f1a88e08d5d2ac12284
Reviewed-by: Richard J. Moore <rich@kde.org>
NTFS file access times are disabled by default since windows 6 for
performance reasons. The test now checks the registry setting and
reports XFAIL if access times are disabled.
Change-Id: Ia84ed0c8736e6c7d5817425006f6115d9f3e70a4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Due to unconditional waits this test always needed 120 seconds to pass.
Now we're using QTRY_VERIFY and make sure that we write the data before
the process got killed even in the cases 3 and 4.
On my machine this test now takes 8 seconds.
Change-Id: I606a8b43ba4c97704be5202a6c5d8d1c75337f9c
Reviewed-by: Bill King <bill.king@nokia.com>
QBool was introduced with Qt-4.0, to detect Qt3-like code like
if (c.contains(d) == 2) and break compilation on such constructs.
This isn't necessary anymore, given that such code couldn't possibly
compile in Qt4 times.
And QBool was confusing developers, and creating compile errors (e.g.
QVariant doesn't have support for it), so better remove it for Qt 5.
Change-Id: I6642f43f5e12b872f98abb56600186179f072b09
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
EditKeyPressed 4 test data fails, all other test data for the function
pass.
Task-number: QTBUG-23696
Change-Id: Ied56bd0b653ad4dcc2b6451b486aae7cad134211
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Both test data fail.
Task-number: QTBUG-23697
Change-Id: Iee4b08a88db33c72c584e326e928863af61c8dd4
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Mark test failures related to tool tips with QEXPECT_FAIL(). See
QTBUG-23707 for description of the failures.
Change-Id: I753256d1db748cef41cf1898620647c4cbacc472
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The tst_windowFilePathAndwindowTitle test currently fails, so mark the
failures as expected failures for now.
Task-number: QTBUG-23682
Change-Id: If64a82c919b218b5c1c38ce5228081bb46fe70ac
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QAuthenticator used it for the convinience of QHttpSocketEngine only.
QHttpSocketEngine has now been ported to use QHttpNetworkReply to parse
HTTP responses.
Change-Id: Idf6e70aa76613aad6e3d789d81ca1b4fd73575c2
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This will return the NSWindow* for the given QWindow*. Port the QWidget
autotest helper to use the native interface and the "nswindow" resource.
Change-Id: I754b7e9288690ac3c99c3ec65c5526d5fe121234
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Qt is Cocoa only now, and does not use HIView anymore, making this test
is meaningless. The testAndRelease() and createAndRetain() helper
functions are also no longer needed.
Change-Id: I26180a4670c8e7445741d3aab510c4da7b65388c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Qt now treats neither NTFS junctions nor mount points as symlinks.
Task-number: QTBUG-20431
Change-Id: I93f67d7438d441ceb53308d4a1f29335beedd547
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We agreed on treating neither junctions nor mount points as symlinks.
This will be handled in another commit.
This reverts commit 1656c4780c.
Change-Id: I41a87b6df9f7fba333df4c967ee9f0c1f3940952
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This test crashes, which can destabilize the CI system, so don't run the
test for now. It is still compiled as part of the build process, though.
Task-number: QTBUG-23695
Change-Id: I841fab7c56b8dba33e8d1b074f118b65790f34ef
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: If805ea762047d07872a278956fc7637e5bafc6db
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: Ib738adfb6d0553e4c995ccaa51e34335f00f50f0
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These were not used in any bridges, and none of the bridges
(MSAA, Cocoa, AT-SPI/IA2) can hardly make use of this information.
Change-Id: If3cad6b6c1928535dd932f46c9ec6883a4a19c76
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Qt::ImEnabled input method query was added for Qt5.
Enhancing source compatibility with Qt4 by setting query value
in QWidget if widget does not return any valid value.
Change-Id: I274c1f6c47a5cb08ecf550b25e5b358622e21d90
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
It was added only to maintain source compatibility with Qt Mobility.
Change-Id: Iea8d40e401bd1f8d5115268e09b256eacca69ea0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Change-Id: I6d69ac96597f27575dd40e4c80c982f06fa88f51
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
NTFS mount points are not treated as symlinks, because they might
not have a link target.
This is the case when a volume is mounted as a single mount point
without a drive letter.
This patch fixes building Qt in an NTFS mount point.
Task-number: QTBUG-20431
Change-Id: Ie2e15212e1a7ca7fa0067b7ca8857e243e42c21a
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@nokia.com>
Since 5e07a3ac58f93bd5e09715d43b58c20950c2befa Thai text layout is
handled by libthai to special case of the SARA AM. It didn't handle
isolated SARA AM. This patch fixed it and added detailed explaination
on the special case.
The dotted circle should be shown rather than hidden.
Add an test case to verify that with Waree.
Change-Id: I4967715627cbe15f5a3e9ab3e3844420ab541aed
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
, as those are going away.
This cleans use of those operations in the QArrayData stack.
Change-Id: I67705fe0a2f8d99ea13739b675021356a5736f83
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: hjk <qthjk@ovi.com>
This looks like the mac port but isn't any more,
remove it to prevent confusion.
Change-Id: I498f536d77d1a3c53e687f696ca6992539a1a90b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
On Mac OS X, tests are build with QT_DEBUG defined, but run against
libraries built with QT_NO_DEBUG, so the expected warning output is not
seen. Use a run-time check instead to know whether or not to expect the
warning output.
Change-Id: Ifb772b764d4135cc8f896827727939fd8cff5388
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: Ic9fedac82d32f8484a9d915d9d91fdaabedc85e2
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- nonWritableCurrentDir() function not valid test if run as root
so added skip.
Change-Id: I772e8356e6f798f5acdf7688c55f3241ad012a43
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- nonWritableCurrentDir() function not valid test when run as root
on unix platform so add skip.
Change-Id: I0c5ee685d3bdeaf3d5d2e0bb93ba7d7796fd1028
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: I962fb8093db5bd83208ebd59ec0cf82005add590
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: If75ae2b8e39f6388f4e84ed4aa2681b5a5917e81
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: Icbc823d87cdf6fd36a8ef10ade8e4bca7d9b1c3b
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- made test depend on copier and paster to make sure they are built first.
- Changed to use installTestHelperApp() to deploy helper apps.
Change-Id: I39e4f2ddcc3c735e17256db5638bf8a3495362f6
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: I7aaf4d16b03373be0fef39fe05c0df0d947dc7e3
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
- skip testing permissions if test run as root user
Change-Id: I5b308789202b01bdd0d630af65775ae23bf0cc4c
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- If we can find the qmake belonging to the build, use that instead
of qmake from the PATH for compiling subtests.
Change-Id: I9445754bb02dab11c3e1bbe9dc459ecc682689a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
By default, QTypedArrayData::fromRawData provides the same semantics as
already exist in QByteArray and QString (immutable, sharable data), but
more combinations are possible. In particular, immutable-unsharable
leaves the data owner in control of its lifetime by forcing deep copies.
As part of this, a new isMutable property is introduced in QArrayData.
This could be taken to be implicit in statics that are initialized with
a proper size but with alloc set to 0. QStringLiteral and QByteLiteral
already did this, forcing re-allocations on resize even before the
(static, thus shared) ref-count is considered.
The isMutable property detaches data mutability and shared status, which
are orthogonal concepts (at least in the unshared state). For the time
being, there is no API to explicitly (re)set mutability, but statics and
RawData mark data immutable.
Change-Id: I33a995a35e1c3d7a12391b1d7c36095aa28e221a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The state should contain useful and clear information.
Some of the old enum/bitfield members were not really clear.
Make them follow Qt terminology and shift the burden of interpreting
them to the bridge.
Apart from the previous commit changing from enum to bitfield, these
flags have changed names:
unavailable -> disabled
mixed -> checkStateMixed
protected -> passwordEdit (in the last commit)
floating is completely removed, even MSAA documentation states it is unsupported.
Some new states have been added.
Documentation added.
Change-Id: I152256e77a061f28ee5780f527524c80a2c7e333
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Modified exceptions as most tests are now passing correctly. Three exceptions
still remain, two serverSideMode tests (ssl3-any, tls1.0-any) and a
verifyMode test.
Task-number: QTBUG-23575
Change-Id: I847e8c2e3484050b8d07ede9aec955c30f7ef5a1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Moved largefile from out of qfile unittest directory to be on
same level as qfile.
Change-Id: I479b0b33594812759f8a6a7be61f8340f64234e9
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- uses QFINDTESTDATA instead of SRCDIR
- Added check to test if fonts are present and generate one skip instead
of 1200+ on platforms were no fonts are available for testing.
- fail if unittest fonts not found.
Change-Id: I9c051cf8cef6cd355f16647c614c86771dcf6150
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Modified unittests to use specific class headers instead of
using super-headers like QtCore that pull in all the headers for
the module.
- Decreasing build time.
Change-Id: I9c3fd0767be15205893bb406f609c8283a2a3a5a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- All subprograms installed as part of test instead of separate installs
using installTestHelperApp() from testcase.prf
- Removed use of app_bundle for subprograms
Change-Id: I0a3de021800d36bd48479f63588b09fc7e60f32f
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test hardcodes IP address / hostname pairs to be used for forward
and reverse lookups.
The reverse DNS entry for 62.70.27.69 has recently disappeared. Replace
it with an IP / name pair which is (hopefully) much less likely to
disappear.
Change-Id: I03f589e1c0f4bde0b1a14e94b3c1047eeb81246e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QNetworkCookie doesn't need to know about QNetworkCookieJar and for
QNetworkCookieJar header a forward declared QNetworkCookie is enough.
Change-Id: I21145ce0f67a0a6bd68a46a5e757f82105cdf520
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The current way we do it of having the platform or touch plugin send
both mouse and touch events is not ideal. There's no good way to write
an application that works sanely both on a touch-only device and on a
desktop except by restricting yourself to only handling mouse events. If
you try to handle touch events you don't get any events at all on
desktop, and if you try to handle both, you end up getting duplicate
events on touch devices.
Instead, we should get rid of the code in the plugins that automatically
sends mouse events translated from touch events. This change enables
that by making the behaviour fully configurable in QtGui.
Two new application attributes are added to explicitly say whether
unhandled touch events should be sent as synthesized mouse events and
vice versa, and no duplicates are automatically sent as the current
situation. Synthesized mouse events are enabled by default.
We also get rid of the QTouchEvent::TouchPoint::Primary flag, which
was only used to signal that the windowing system automatically
generated mouse events for that touch point. Now we only generate mouse
events from the first touch point in the list.
Change-Id: I8e20f3480407ca8c31b42de0a4d2b319e1346b65
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Add a test case for calling QEXPECT_FAIL in a data-driven test without
passing a specific data tag for the expected failure, in which the
expected failure should apply to the current data row.
Change-Id: I70a6592de77b1718c3a749fd2216e66f8f312805
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add a test for the case where a call to QEXPECT_FAIL nominates a
different data row from the current row, in which case the call to
QEXPECT_FAIL should be ignored.
Change-Id: Iff774b89f9374fa26105acdd8769177272a95229
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add a test for the case where QEXPECT_FAIL is called twice in a row
without an intervening verification step, which is supposed to result in
a failure.
Change-Id: Ie004652a76a2c35c2679945670ff5561e8f5b62e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It is now the resonsibility of the bridge to support this
(by querying for QAccessibleInterface::rect())
The windows bridge (currently the only bridge in need of this) has
already been updated to reflect this in commit
7dca461620
Change-Id: Ief1339ab6edc118e2d47e3875e09fa885db65c2f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
All references to QFtp in documentation have been removed, QFtp's
documentaiton was marked internal. The QFtp example was removed.
Task-number: QTBUG-23199
Change-Id: Ifff83cac069fb350e8ebeae63e605850e65c0c30
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This makes it possible for platform plugin independent code (such as
generic plugins) to report changes to screen properties. An example
would be an accelerometer plugin that reports orientation changes
without knowing anything about the windowing system.
Change-Id: I984984b6d064327772c264bc942269422451da37
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
- Introduce separate state machine class with a timer instead of
using semi-synchronous qWait(). Also invoke closeAllWindows()
repeatedly should the file dialog be slow on Windows.
- Use QTemporaryDir for test data to avoid conflicts with
remains from previous tests.
Change-Id: Ibd95176b44ff20d6f326dc3139fb386472f64c2b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Crash was introduced by d639105759491 (pre-Qt-4.8 only)
Task-number: QTBUG-15834
Merge-request: MR-2725
(cherry picked from qt4 commit fd25323de7b5d5f3e0ffb1bd81ea4d251e071566)
Change-Id: I59959d3ba4c9bcb0d39bdbe58432817bbbfdd9f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QAbstractItemViewPrivate::renderToPixmap was not setting all the flags
that the normal QTreeView painting sets:
option.showDecorationSelected, option.viewItemPosition (so the drag pixmap
looked wrong on Windows 7, with rects around each cell), and then the
unittest also discovered that State_Children/State_Sibling wasn't set either.
Task-number: QTBUG-15834
Merge-request: 2517
(cherry picked from Qt4 commit d63910575949106f84dacf04abaa14fc866aa66b)
Change-Id: I0a5014d960543c3ed8fea73d6df578e7e521b0e0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Make the test fail if calling QEXPECT_FAIL with the mode set to Abort
does not cause the current test function to abort. Previously, such an
error would not cause the selftest to fail and someone would have to see
the warning message in the test output to know that there is a problem.
Change-Id: I2bd58fafe6b51ea0ab86fde7c5afb781e4534ee4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The existing expectfail selftest did not test QEXPECT_FAIL with a
data-driven test function. This commit adds such a test.
Change-Id: I39fa9aa227b58779ce5268dd37bf55468e7269c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test relies on being able to set a custom QLibraryInfo::PrefixPath
for the duration of the test. However, the test code neglected to
account for the following behavior on mac (from "Using qt.conf"
documentation):
On Mac OS X, the Prefix is relative to the Contents in the application
bundle.
Change-Id: Ie9b6d5ebfe8af7d7f332e827069b60a830d6c6f2
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Numerous failures in the qsslsocket autotest suite relating to
connections without using proxies. Some have been skipped due to
the number of failures, other more specific tests have been set
to expect a failure.
Task-number: QTBUG-23575
Change-Id: I35fccc65bcab303646617a57a33f5aa7f7a4323f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of these test have had unstable results for multiple runs.
QTBUG_4151_clipAndIgnore and QTBUG_16063_microFocusRect seem to be the
unstable tests.
Task-number: QTBUG-16063
Task-number: QTBUG-4151
Change-Id: Idd108197c327446080dbd69dfe5c5fba6b2944cd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It was checked in a few places, but it didn't actually remove QTextStream,
so it was pretty useless.
Change-Id: I8eaf28893cd6c7acbe1c0b69d58de90742aee755
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
(This is only for a test case, but still...)
Change-Id: Ied205860e5469000249e15a5478c10db53f1fdaa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Makes the code nicer and more consistent with the rest of the world.
Change-Id: I5ba0ee39f5b0afd1a079a3cea9990d123955ed3f
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
- Changed to detect valgrind at runtime and skip test instead of failing.
- subprograms inherit QT_QPA_PLATFORM value from parent if set.
Change-Id: I280acee389df1ee74ee6758a0dd1601226e103c7
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- All subprograms installed as part of test instead of separate installs
- Added installTestHelperApp() to testcase.prf
Change-Id: I02fbbb299f095054c9216ad0e5f91f574fb0fe3d
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Introduce QTRY_VERIFY_WITH_TIMEOUT and QTRY_COMPARE_WITH_TIMEOUT
to be able to specify a timeout value.
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: Iaeaa4938eb14f2c431537055f626510cba183ce3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Preparing the introduction of a change that uses the actual
QScreen resolution in the style helper.
Change-Id: I3fbb36b0d6a34904c875a2e3684d73124f534bed
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Change-Id: I4001fcabc67e5b46465b3c9111c33247c52e5788
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This is consistent with the rest of the API of QAbstractItemModel
(which is virtual) and removes the need for code like this
in the constructor (where it doesn't belong):
QHash<int, QByteArray> myRoleNames = roleNames();
myRoleNames.insert(Qt::UserRole + 1, "myCustomRole");
setRoleNames(myRoleNames);
in favor of
MyModel::roleNames() const {
QHash<int, QByteArray> myRoleNames = QAbstractItemModel::roleNames();
myRoleNames.insert(Qt::UserRole + 1, "myCustomRole");
return myRoleNames;
}
which is consistent with all other QAIM API (eg, flags()).
This is a source compatible change.
Change-Id: I7e1ce17f8dab2292c4c7b6dbd3c09ec71b5c793b
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Marius Bugge Monsen <marius@cutehacks.com>
New implementation fixes some commented code marked as FIXME.
Change-Id: If8f5bebedd65bcf8f839d804c2022ca79ef82ddf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We would like to add more flags that will be over the 32 bit boundary.
On Windows enums don't seem to digest values >32 bit.
This patch changes the state flags to be a bit field instead.
The windows part of the patch was written by Jan-Arve Sæther.
Change-Id: I2d1d87807f920ce4d4a5c7bfea8b1122ed44eb08
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The custom QTRY_VERIFY macro is needed since the one provided by testlib does
not support custom timeout.
Change-Id: I12bbc5efcb16c4f53514ad738d6115d217a55b05
Reviewed-by: Alex <alex.blasche@nokia.com>
It's only used by Maemo and Harmattan, thus not needed in Qt5.
Change-Id: I8638f4fc63637be88d1aa584cde7e3a4116f2de6
Reviewed-by: Alex <alex.blasche@nokia.com>
Changed selftests unittest to use specific classes of QtCore instead of
pulling in all of QtCore headers by using include <QtCore>
- Decreasing build time.
Change-Id: Ic53a70423ecafeb342cc05ae6d7dee795533d205
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reinstate a check that was presumably disabled because it wasn't
checking for the right expected date. At present pressing Enter in a
QDateTimeEdit without changing the date still emits the dataChanged()
signal. By reinstating the test, we ensure that the behaviour can't
change by accident.
Change-Id: I1b766af6ced001a4191606247338dbc91049cb8d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The created entity node's reference count needs to be decremented to 0
before it is added as a child, because appendChild will increment the
reference count to correct value of 1. Re-enabled commented-out test data
tst_QDom::setContent to exercise the code path with the leak.
Change-Id: Ieb015d68ba9bbb3f20dd47e76835ad15abb1738e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Changed qprocess unittest to use specific classes of QtCore instead of
pulling in all of QtCore headers by using include <QtCore>
- Decreasing build time.
Change-Id: Ifc7911548e4a9323726093ac1d35e4ce38b5f8ad
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Before the selection of cells NW of anchor showed some defects where
cells would not be selected as the user expects
Change-Id: Ia2b63f11b8d534e918ffb97b76339d60f1ca0389
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
The QtV8 library is going to live in the qtjsbackend module.
Change-Id: I72251316163829411dda998b9503ce6f75b3606a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This approach is better for future ABI evolution than using individual
bool parameters. QArrayData now also offers to calculate allocate
options for typical detach and clone operations: the CapacityReserved
flag is preserved, while cloning resets the Unsharable state.
Change-Id: I256e135adcf27a52a5c7d6130069c35c8b946bc3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
It is mostly not used (most places in Qt use typename directly), so
is already not very useful.
For example typename is used in:
QDataStream& operator<<(QDataStream& s, const QVector<T>& v)
Change-Id: I85337ad7d8d4ebbb424bfa2ab9a356456ff3e90f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
They still exist and help avoid allocation of "empty" array headers, but
they're no longer part of the public API, thus reducing relocatable
symbols and relocations in inline code.
This means an extra non-inline call on QArrayDataPointer::clear and
setSharable operations, which are (expensive) detaching operations,
anyway.
Change-Id: Iea804e5ddc8af55ebc0951ca17a7a4e8401abc55
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These are deprecated in favor of
QAccessibleInterface::child() and QAccessibleInterface::parent()
QAccessible::Sibling can be done with a combination of those two.
This is handled by the bridges, if required.
Change-Id: I2e2a6eb2a982e7c9001a393d69f0c5f1ae9c0970
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Making use of the same feature added in RefCount.
To keep with the intention of avoiding the allocation of "empty" array
headers, this introduces an unsharable_empty, which allows users to
maintain the "unsharable bit" on empty containers, without imposing any
actual allocations.
(Before anyone asks, there is no point to a zero-sized capacity-reserved
container so no other combinations are needed for now.)
Change-Id: Icaa40ac3100ad954fdc20dee0c991861136a5b19
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
We're trying to deprecate these, so don't use them anymore.
The inline uses of these have been left intact, for the moment. Inline code will
need to create their own non-inline allocation methods (for future-proofing to
allow alterations in how e.g. individual containers allocate)
Change-Id: I1071a487c25e95b7bb81a3327b20c5481fb5ed22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The removed class was evidently attempting to promote protected members
of its base class to public, but the way this was done doesn't work and
doing so wasn't actually necessary for the test.
Change-Id: I15e0c31891da08cacee1054e15596a79a058b466
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QHttpNetworkReply crashed in Qt4.7 and 4.8 if a HTTP server responded with
gzip-encoded empty content without defining Content-Length in the response
header. This commit adds the test for the problem as a regression test to
Qt5.
Change-Id: Iddfb970a31d92a66fd1dd524811cf54bb06e5157
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The created entity node's reference count needs to be decremented to 0
before it is added as a child, because appendChild will increment the
reference count to correct value of 1. Also added autotest DTDEntityDecl
to tst_qdom to expose the leak when executed under valgrind memcheck.
There was no previous direct test case for unparsed entity declarations in
DTD, only indirect coverage via regression test cloneDTD_QTBUG8398.
Task-number: QTBUG-22587
Change-Id: I394ae9fc32d5b84e4ca287c5db4dd7effde6128b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The created notation node's reference count needs to be decremented to 0
before it is added as a child, because appendChild will increment the
reference count to correct value of 1. Also added autotest DTDNotationDecl
to tst_qdom to expose the leak when executed under valgrind memcheck.
There was no previous test coverage for the notation declarations in DTD.
Task-number: QTBUG-22588
Change-Id: I876186d1277ceb4414f803b58b62f51cc1474367
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Windows x64 uses 64 bits integer for sockets, to ensure compatibility we
should use ptr sized integers for our socket descriptors.
Task-number: QTBUG-19004
Change-Id: I4b56023874a4f1bad107c66c054fecfedde33d88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
All QDebug operator << in custom classes were disabled by
QT_NO_DEBUG_STREAM, which was set by QT_NO_DEBUG_OUTPUT.
Now QT_NO_DEBUG_STREAM is never set automatically, but remains available
for reducing the feature set altogether (qconfig.h).
Remove check on QT_NO_TEXTSTREAM: this define is meaningless, it
doesn't even undefine QTextStream, and this is unrelated to QDebug
streaming anyway.
Change-Id: I5eeed0144fa684d0e790e9dfd9a4aeb956218c39
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This removes const qualification on data members of QConst*Data, which
was subjecting QString's and QByteArray's shared_null to the "order of
static initialization fiasco", with up-to-date VS 2010.
Furthermore, the const qualification in the places where it was removed
had little meaning and no value. It was unnecessary. As such, "Const"
was removed from the struct's names and "Static" used in its place, to
imply their usefulness in supporting statically-initialized fixed-size
(string and byte) containers.
A test case was added to QArrayData as that is meant to replace both
QStringData and QByteArrayData in the near future.
VS issue reported at:
https://connect.microsoft.com/VisualStudio/feedback/details/716461
Change-Id: I3d86f2a387a68f359bb3d8f4d10cf3da51c6ecf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
A reference count of 0 (zero) would never change. RefCount::deref to
zero would return false (resource should be freed), subsequent calls on
the same state would return true and not change state. While safe from
RefCount's side, calling deref on a reference count of zero potentially
indicated a dangling reference.
With this change, a reference count of 0 is now abused to imply a
non-sharable instance (cf. QVector::setSharable). This instance is to be
deleted upon deref(), as the data is not shared and has a single owner.
In practice, this means an (intentional) change in behaviour in that
deref'ing zero still won't change state, but will return false, turning
previous access to dangling references into double free errors.
Users of RefCount wanting to support non-sharable instances are required
to check the return of RefCount::ref() and use RefCount::isShared() to
determine whether to detach (instead of directly checking count == 1).
New functions are introduced to determine whether RefCount indicates a
"Static" (permanent, typically read-only) or "Sharable" instance and
whether the instance is currently "Shared" and requires detaching prior
to accepting modifications..
This change formalizes -1 as the value used to flag persistent,
read-only instances, no longer reserving the full negative domain. The
concrete value is part of the ABI, but not of the API. (isStatic and
Q_REFCOUNT_INITIALIZE_STATIC are part of the API, instead)
Change-Id: I9a63c844155319bef0411e02b47f9d92476afefe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The test was allocating a new model on the heap each time init() was
invoked, but none of these models were deleted.
Change-Id: Ibe107b2dbc949a5f72940f67c08f4b0f46256c09
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use a small helper class to ensure that the files created during the
test are removed afterwards, even if the test fails. Also, verify
creation of the files in the body of the test function, not in the
helper, as verifying in the helper won't terminate the test on failure.
Change-Id: I76eff20e54ef6a1ed71d9bbb31e00f41f3d14c38
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Changed these tests to use QFINDTESTDATA macro to detect location of testdata.
Checking for a specific file contained in the testdata so as not to be confused by empty directories
created during configure.
Change-Id: Iac2ac6304b6b9ac79e00886025b93ec0af5a8507
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This signal can be used to clean up OpenGL resources in a safe way
before the context is destroyed.
Task-number: QTBUG-20083
Change-Id: I45a4be01b06af4ee7196fa502116f099d50afeab
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This was only being used to initialize static read-only RefCount
instances, where the value is hard-wired to -1. Instead of allowing
initialization with arbitrary values (which for a reference count can be
error prone) the intent of the macro is made explicit with its
replacement Q_REFCOUNT_INITIALIZE_STATIC.
Change-Id: I5b0f3f1eb58c3d010e49e9259ff4d06cbab2fd35
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Commit d52fd497f6 introduced a call path to
QPaintEngineEx::drawStaticTextItem, which has a bug in using the pen's color
instead of the entire brush.
This patch replaces the use of the color with the pen's brush().
Task-number: QTBUG-23450
Change-Id: Ieb3bf352c840ff0d3fb4ac678caf7b13f4f9a8f1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This is particularly useful for situations where the user might really want to
be notified about a failure, for instance, in a backup application.
Empty paths are not treated as an error in calling, as the user code cannot
really do anything sensible to handle this error, but empty paths should not be
used.
Change-Id: Iddb44fd39f4e3fac5c3f9f60fb7999e1833280a8
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QVariant implementation is based on delegation to a handler. The handler
has rather simple construction, it is a set of function that implements
a switch statement over known types and redirects calls to a right
method of an encapsulated types instance. Unfortunately after qt
modularization project, it is not easy to use types directly from
different modules, as they can be undefined or completely unaccessible.
Which means that each module has to implement own handler to cooperate
correctly with QVariant. We can suspect that list of modules known to
QVariant will grow and it is not limited to GUI, Widgets and Core,
therefore it would be nice to have an unified, from performance and
source code point of view, way of working with handlers.
This patch is an attempt to cleanup handlers. Keynotes:
- Each handler is working only on types defined in the same module
- Core handler implements handling of primitive types too
- Custom types have an own handler
- Each handler is independent which means that dispatch between handlers
is done on QVariant level
- Handlers might be registered / unregistered using same interface
Change-Id: Ib096df65e2c4ce464bc7a684aade5af7d1264c24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QCOMPARE and friends should only be called in a test function. Instead
of calling QCOMPARE elsewhere, keep a count of the number of errors and
QCOMPARE that count with zero in the test function.
Change-Id: I9a264e91169a98c30980fdc04a3e45bfb0ca8063
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no need to print out the name of the backend used by each test
run of a test function as every message output by the test function will
have the name of the current data row included.
Change-Id: Ie69881d2ecedce728ea67b5aae1c1196776552a5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
On Mac, the application's dir is in the bundle, so we need to "escape"
the bundle when looking for the an executable relative to the
application's dir path.
Change-Id: I5c01f7d816ec8cc30f5277202f4eefb0c49a2bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Inotify has been available in Linux for some ~6 years now, 7 when Qt 5 will
actually be released, so I'd say it's safe to remove this fallback path now,
particularly as the autotest notes that it's broken.
Change-Id: I49dbb161d4765d63e92f512a6375323c7d37ccbe
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The value is changed to true. It is a common bug that developers expect
this proxy model to reflect the source model when the source changes.
That requires setDynamicSortFilter(true), so we change the default to
optimize for the common case.
Change-Id: I9bf7efdbda10309fa77aed9391c33054aaae4a29
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Pure syntactical sugar, to match up with what the other container
classes offer.
Change-Id: I0f97de011923d9d204cca0fa906b059dc5054a89
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously they would fall into the unicode handling and return very
strange values.
Change-Id: I62a53894c0983bf53fd79f924b40a6fd3ba02993
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: If36b1b8f69c3509128786fec67899ae18ffaa2bc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This testcase fails on the Ubuntu 11.10 x64 platform, add flag to .pro
file so test is ignored on this platform.
Task-number: QTBUG-23380
Change-Id: I51831df8c8e9bfcf63d3689e37552ca1a62691cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several of the test functions in the QDebug autotest call
qInstallMsgHandler() to temporarily use a custom message handler.
Unfortunately, these test functions were then resetting the message
handler back to Qt's default handler at the end of the test.
QTestLib also calls qInstallMsgHandler() to set a message handler that
redirects debug/warning/fatal messages into the test log. When the test
resets the message handler back to Qt's default handler, testlib's
message handler is bypassed for the rest of the test, preventing any
subsequent debug/warning/fatal messages from being visible in the test
log or subject to testlib's ignoreMessage() function.
This error also caused several of the test functions to fail if they
were run manually. The "defaultMessagehandler" test would fail if it
was run before any other test function and the "assignment" test would
fail if it was run after any other test function.
This commit fixes these failures by using a helper class to ensure that
the previously active message handler is restored at the end of each
test function, even if the test function fails or throws an exception.
Change-Id: I51376724d164c8ad126e5b9be76890bf3e6a9fb0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When verifying nonzero results (i.e. that something expected *did* happen),
using these macros allows bailing out of the timer much earlier than the
potential 5 seconds.
My running this on Linux goes from ~147 seconds to ~91 seconds.
Change-Id: Ie1e41252eb4eb295b5c8e795ded02f00eb7f9387
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Don't call QSKIP when omitting the optional part of the test, as doing
so hides the fact that the rest of the test passed.
Change-Id: I9c102e8daeaf9586b2e510c4c9ce697ead290795
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_VERIFY() to fail after a reasonable timeout rather than putting
the test into an infinite loop.
Change-Id: Ie0917556e15999a94cc0587f3f4c11c0d743a228
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Register the meta-type in initTestCase(), which is run once, rather than
in init(), which is run before every test function is run.
Change-Id: Ic62a2469da6a2a85254ffc7c4d893395202c50d8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The threadCount() test function is unstable and had been disabled by
making it not be a slot. It is better to disable it with QSKIP so that
the test output shows that the test function exists and is in need of
repair.
Change-Id: Iccdc8da31e0d15d922f7e9606835d1ff1a3a4966
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Avoid using bug tracker identifiers in test function names. These
identifiers lose their meaning when the bug tracker is replaced.
Change-Id: Ia867f7c2ec2ab9ed546588843d532ac615a34031
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored test data was marked as failing, but appears to pass, and
the available history does not explain why it was commented out.
Change-Id: I7e9e3ba72fc8fef42c91ee882efa98d25b3d8317
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The data file named "trolltech" has nothing specific to Trolltech in its
contents. Rename it to "testhtml". The lack of a file extension is
intentional.
Task-number: QTBUG-19653
Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QDBusArgument QByteArray extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QByteArray when the value actually is e.g. a struct of
mixed types the byte array extraction will crash as it attempts to extract
the struct data as a fixed array.
The fix adds DBus type checks to QDBusArgument byte array extraction
operator implementations.
The checks invalidate extracting arrays of other types than bytes to a
QByteArray that worked with the unchecked implementation. The rationale
for this restriction is
1) extracting a QByteArray to a variant checks already that the array
element type is byte
2) Results of extracting arrays of types wider than a byte to a QByteArray
are architecture-dependent making such code inherently non-portable.
Task-number: QTBUG-22840
Change-Id: Ie20f2adc06c697a68055c803215fb408568fdd90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QStringList extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QStringList and the value actually is e.g. an array of
bytes the string list extraction will crash as it interprets the bytes as
char pointers.
The fix adds DBus type checks to QDBusArgument QStringList extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Task-number: QTBUG-22840
Change-Id: I4b67d75b59c5052d939f3a69f3e92dabdb3bdd6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument string extraction operators and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting string-like basic DBus type that actually is e.g. an
integer the string extraction will crash as it blindly attempts to use the
integer as a pointer to char.
The fix adds DBus type checks to QDBusArgument string type extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Previously supported functionality of extracting an object path or type
signature to a string type is retained.
Task-number: QTBUG-22840
Change-Id: I29be1ae592658ca268c65ed692e1d42619d52280
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTestLib-based autotests cannot perform verification steps in the test
class constructor. This needs to be done in initTestCase() instead.
Change-Id: Ib1f7f838f052fa0fc5104603bdac01ffd8313aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC 4.6 fails to build the test because of narrowing conversion.
Change-Id: I927693789be7f3df7bd1a96c8924fc04716a03f0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This adds a new function (and tests) to give the possibility of doing a
QCryptographicHash of a QIODevice, like a QFile or whatever people
needs.
It is a quite handy overload in many cases.
Change-Id: I22fd272f05571844641b3daefcc6746be4e5c7c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression caused by the NTLMv2 authentication patch.
I have manually tested NTLMv2 authentication against MS IIS and reverting
these two lines does not break it.
Task-number: QT-5209
Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
After 8fd64d22ac (Make usage of internal
QVariant space.) change QVariant started to "inherit" movablity from
interned type.
This change fix it by interning only movable type in QVariant and by
using external allocation for not movable ones.
Obviously, this change has negative impact on QVariant it self, but
after it, QVariant will behave a lot nicer with our containers.
Change-Id: Ibffc95833918f65be737f52d694ee81a2036c412
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
When decoding a string don't assume valid modifier strings. If a
modifier string is unknown return Qt::Key_unknown instead of skipping
the modifier.
Currently 'Win+a' is decoded to 'A' but should be Qt::Key_unknown.
Change-Id: I1c82031159a8b3c19924a7c9e991bc6b1f90d617
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Add styles/qmacstyle_mac back to the build, modify
qstylefactory to load it on Q_OS_MAC.
Move helper functions from platforms/mac to
qmacstyle_mac.mm. QMacStyle should now be self-
contained and not rely on anything from platforms/mac.
Change-Id: I68fe40bb7f88c01269968bffd9579b7f3b932d4c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Test the authentication cache works properly with "cancelled dialogs"
or if the user enters username/password incorrectly.
Expected behaviour is based on web browsers:
If cancelled, current request fails, and prompt again the next time.
If wrong password is given, prompt again and retry the current request.
If bad credentials are in the cache, prompt again
Task-number: QTBUG-22875
Change-Id: Ic02ccac8dbeb3f2580ca4ffe47d0773982c4ab25
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The test was skipped, but still tried to compile code that uses
exceptions. The throwing class it uses was conditionally compiled
out earlier in the file, causing an error for undefined class.
Task-number: QTBUG-23028
Change-Id: Ia2e05a8a0abbf0e913f6c41e85bfee8b85cbc8a5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Introduce a specialization for qCompare(QImage,QImage) that
checks isNull, size and format and outputs verbose messages.
Check isNull, size similarly for QPixmap.
Add an autotest:
- Add test to cmptest and make it a GUI application since
QImage requires QGuiApplication.
- Make testlib/selftests capable of running X11-GUI applications
by passing DISPLAY.
- Ignore stderr output for cmptest
- Add test data
Change-Id: I2b29c7822fbeedf2b22c90889739ed7ff859ce92
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Was basically checking that a method call is a method call and
QApplication::setInputContext() sets the input context.
Change-Id: Ia8723fe245f2480d503f0140f61078dc074161fc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Critical bug... Good thing I had backups of my $HOME.
Change-Id: I43b3a80786c946b0aec797036c1164d436d521f8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The "happy eyeballs" connection code means that IPv4 and IPv6 connections
are both attempted for a http request.
For a normal http server, this is no problem, but the MiniHttpServer in
the test code is very simplistic and cannot cope with more than one
client connected at the same time.
On windows this causes all these tests to fail with timeouts.
Changed the MiniHttpServer to listen on IPv4 only instead of Any address.
Change-Id: I81e249997d894d266001da474a351b1f5642599e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
childAt used to return an integer.
Return an interface instead.
Not requiring a direct child to be returned allows optimizing
by bypassing iterating through the hierarchy of accessibles.
For QtQuick this is the only sensible way of implementing this.
The bridges are still responsible for finding the top-most element.
The default implementation in QAccessibleObject is sufficient
to return direct children. The implementation in
QAccessibleApplication is therfore no longer needed.
Change-Id: Id7100dd5bcc3a98de516a7f4a12eaaa41cb46d26
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Required for launching the sub-processes. The test worked only
when launched locally, not from 'make check'.
Change-Id: I42c9202a7726c3135f94445fb336b2b8241535a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
For some strange reason "Object::method ..." was printed, without
the leading Q.
Change-Id: I10b99e8aa8730e4020d15b3e04a01004bade76c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Use QFINDTESTDATA to set the working directory
and change the profiles accordingly (as in
the qprocess-test).
Change-Id: I332038728c64214f73ced448e1466ad96c11b3b3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This class provides RAII functionality for handling QArrayData pointers.
Together with QArrayDataHeader and QArrayDataOps, this offers common
boilerplate code for implementing a container which, itself, defines its
own interface.
Change-Id: If38eba22fbe8f69038a06fff4acb50af434d229e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Inserting elements anywhere in the array requires moving the elements
that follow out of the way and writing in the new ones. Trivial for PODs
and almost as much for movable types.
For "complex" types, we start by extending the array with placement new
and copy constructing elements. Then, copy assignment resets the
elements that were previously part of the array.
QPodArrayOps uses non-throwing operations. QMovableArrayOps provides
full rollback in the face of exceptions (strong guarantee).
QGenericArrayOps enforces that no data is leaked (all destructors
called) and invariants are maintained on exceptions -- the basic
guarantee.
With 3 different implementations, 2 of which are non-trivial, this
operation is a good showcase for QArrayOpsSelector and the different
implementations. As such, it warrants its own commit.
Change-Id: I21d9b4cb8e810db82623bcd1d78f583ebf3b6cb7
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This class, the selector and underlying implementations provide
specialized operations on QArrayData, while allowing for optimized
implementations that benefit from type-specific information.
Currently, offering a generic implementation and specializations for
PODs (trivial ctor, dtor and move operations) and movable types (can be
trivially moved in memory).
Change-Id: I2c5829b66c2aea79f12f21debe5c01f7104c7ea3
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The duplicated hash tables in QGuiApplicationPrivate and
QApplicationPrivate are now unified into one single hash table in
QGuiApplicationPrivate. This also reduced the number of lookups.
The extra processing needed to keep the touch points' first/lastPos
values in sync is now done only once, in QGuiApplication. This
eliminates the performance penalty (for widget-based apps) that was
introduced during the QPA migration.
As an added bonus the patch adds support for touch events arriving
simultaenously from multiple devices. This was broken before: As there
is no guarantee that two devices/drivers will not send touch points
with the same ID, using structures with only the ID as key is
wrong. The proper key is composed of the device ID (that is, a
QTouchDevice pointer) and the touch point ID.
The exported internal function qt_translateRawTouchEvent() has been
removed. This function cannot work properly in the QPA world: It
injected touches into the widget subsystem (QApplication) only which
is wrong, and would result in half-filled touch events due to not
routing the injected data through QGuiApplication. Autotests using
this function are migrated to
QWindowSystemInterface::handleTouchEvent().
Change-Id: I7632781d77f9e0ac4626fd7c9933511c94492156
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Changed to use QT_INSTALL_TESTS to install subtests.
Change-Id: I4a2a7bd2d3e7d6da34dbb922bf377bee98cdedb0
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
On Windows, the signalbug.exe could not be launched since it is
not next to tst_qobject.exe, which is in one of the
'release', 'debug' subfolders.
Introduce a subdirectory structure similar to that of
the QProcess test and use QFINDTESTDATA to locate it.
Change-Id: Ie8f2ede8cb76f22a908cb77517a74076be11fbb7
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The old test only verified the behaviour of QCOMPARE when comparing
lists that were different. Add data rows for comparing empty lists and
non-empty lists that are equal.
Note that testlib currently does not report passing data rows (only
failing rows and completely passing test functions), so the new data
rows do not cause any change in the expected test output.
Change-Id: I137650ce0ca6250cee36bd9cb74b01f8abd4e89c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The (disabled) alive selftest contained a test for the QStringList
specialization of the QTest::qCompare template. This test is unrelated
to the rest of the alive selftest, so move it to the cmptest selftest,
where QCOMPARE is tested.
Change-Id: Ic6f0e491dd3b3ce8b4ca1d49666a099815575eaa
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When starting new animations with existing animations running, ensure
we force an update to the timer first, so that the new animations can't
mistakenly start with a very large delta.
This fixes tst_qdeclarativeanimations::alwaysRunToEndRestartBug failure
on slow machines.
Change-Id: Ida4e5dcf0ff792e6bfe0d244b6e969d04d0b20fa
Reviewed-by: Martin Jones <martin.jones@nokia.com>
- Add some QVERIFY to check for isNull().
- Use QTemporaryDir to avoid spurious failures in the format
extension-ignore test (cannot copy to '/tmp/black.jpg').
Change-Id: Ia57ea4daa6b8686d1111c9c27a47666265fa9781
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test that was failing was the readFromDevice one - where the
extension is not known.
Looks as though image detection is required in a positive way, that is
it is not enough to say I think I can read this file, and then fail if
the format is "corrupt", you must be certain that the file was intended
to be that format.
In the case of TGA the original format has no magic byte header, and no
consistent way to check if it really is a TGA file. With 2.0 the footer
was added at the end, so that can be checked for confirming the file is
TGA. However rejecting files which do not have this means that old TGA
files will not be read.
On a quick survey TGA files that have been used in applications so far
all seem to be 2.0 TrueVision, so for now, lets just reject earlier
files and see how it goes.
Also add reading the tga test file to the readFromDevice test.
(cherry picked from commit 665bc3951709f0d726cb82501a5bca684f3347a5)
Change-Id: I665bc3951709f0d726cb82501a5bca684f3347a5
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Updated three instances were not using QFINDTESTDATA.
Change-Id: Ibd0f6734791fc5d98ebeb65ac3bd80aa1c076414
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If both a stop and start happen within an event loop, ensure they are
processed in order.
Based on a patch from Charles Yin.
Task-number: QTBUG-22865
Change-Id: I6131bd43a6ba5ad4fa37c863a9f4598bf2ac0e01
Reviewed-by: Leonardo Sobral Cunha <leo.cunha@nokia.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
Unlike keyPressEvent(), mousePressEvent(), etc. the touch events had
no equivalent so one had to fall back to reimplementing event() or
using an event filter. This is now corrected by introducing
touchEvent(). Touch events are finally becoming a first-class citizen
in Qt 5.
Change-Id: Ia2044030154fd5b1b5384f08a3cb1749b798435f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This also adds a unit test for length()/count()/size(), since there wasn't one
testing it explicitly.
Change-Id: Ifb7f113aa97beef5f76e5fb246eb38495344b0ad
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Marco Schmidt <Marco.Schmidt@Taugamma.de>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The test generates the runtime_resource.rcc data file at build time. Add
this to .gitignore.
Change-Id: Ief4057072b28499049147b86f166523b71afe269
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Even though it is stated in the documentation that the SQL driver must
remain valid during the life time of QSqlQuery, there are users who don't
follow the rule. It's common that the destructor of QSqlQuery is called
after the driver is already deleted. This fix checks the validity of
the SQLite driver before QSqliteResult uses it in destructor.
Task-number: QTBUG-16967
Change-Id: If0f52113f12e14102da1671cd6e12bdaa267114f
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The overload is used in Qt Creator
(see src/libs/extensionsystem/pluginmanager.cpp).
The use case here is an application whose internal
QObjects can be tested by passing a command line parameter.
For this use case, it is inconvenient to have to allocate
memory and create a char argv[]- array.
This reverts commit ad80d42f8e.
Change-Id: I2a2f91e2840100fd62743f6d03b33005d67b18f8
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
A bug has been reported against GCC 4.4.3 (present in other version as
well), where the use of an array of size 1 to implement dynamic arrays
(such as QVector) leads to incorrect results in optimized builds as the
compiler assumes the index to be 0.
This test tries to ensure QArrayDataHeader is not affected by this bug,
as QVector currently is.
Change-Id: Id701496bae4d74170de43399c1062da40eb078e7
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QTypedArrayData is a typed overlay for QArrayData, providing convenience
and type-safety. It adds no data members to QArrayData, thus avoiding
compiler-generated warnings for aliasing issues when casting back and
forth.
Change-Id: I969342a30989c4c14b3d03d0602e3d60a4cc0e9d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QWeakPointer is superior and preferred.
Remove QMetaObject::addGuard(), QMetaObject::changeGuard(),
QMetaObject::removeGuard(), and QObjectPrivate::clearGuards().
Implement QPointer using QWeakPointer<T> instead. This changes the
behavior of QPointer in 2 ways:
- During destruction of a QWidget. Previously, the destructor of QWidget
would reset all QPointers so that they would return zero when destroying
children. Update tst_QPointer to account for this change.
- When constructing a QSharedPointer to take ownership of an object
after a QPointer is already tracking the object. Previously, the shared
pointer construction would not be affected by the QPointer, but now
that QPointer is implemented using QWeakPoiner, constructing the
QSharedPointer will cause an abort(). Fix tst_QSharedPointer by
removing the use of QPointer in the objectCast() test.
These behavior changes are documented in the QPointer class
documentation and in the changes file.
Change-Id: I92d0276219c076ece7bcb60f6e1b9120ce4f5747
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Centralizing QArrayData memory management decisions in one place will
allow us to be smarter in how we allocate header and data.
At the moment, these are allocated as a single block. In the future we
may decide to allocate them separately for "large" data or specific
alignment requirements.
For users of QArrayData this remains transparent and not part of the
ABI. The offset field in QArrayDataHeader enables this.
This also hard-wires allocation of empty arrays to return shared_empty.
Allocating detached headers (e.g., to support fromRawData) will thus
require explicit support.
Change-Id: Icac5a1f51ee7e468c76b4493d29debc18780e5dc
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Check path/fileName is empty upon failure, variable was unused
- Use /home instead of /, as / is writable by admins on Mac
Change-Id: I705471fda8b73843e98b30eb52aa0a73634ec075
Reviewed-by: David Faure <faure@kde.org>
The capability flags indicate which information is valid in the touch
points. Previously there was no way to tell if e.g. the value returned
by pressure() is actually the value provided by the driver/device or
it is just something bogus due to pressure not being supported.
The points' flags return information about the individual touch
points. One use case is to differentiate between touches made by
finger and pen.
Velocity, if available, is now also exposed.
Each touch point can now contain an additional list of "raw"
positions. These points are not reported individually but are taken
into account in some way by the underlying device and drivers to
generate the final, "accurate" touch point. In case the underlying
drivers expose these additional positions, they are made available in
the lists returned by the touch points' rawScreenPosition().
The raw positions are only available in screen coordinates to prevent
wasting time with mapping from global positions in applications that
do not use this data. Instead, apps can query the QWindow to which the
touch event was sent via QTouchEvent::window() and can call
mapFromGlobal() manually if they need local raw positions.
The capability and device type information is now held in a new
QTouchDevice class. Each touch event will contain only a pointer to
one of the global QTouchDevice instances. On top of type and
capability, the new class also contains a name which can be used to
differentiate between multiple touch input devices (i.e. to tell from
which one a given QTouchEvent originates from).
The introduction of QTouchDevice has three implications: The
QTouchEvent constructor and QWindowSystemInterface::handleTouchEvent
need to be changed (to pass a QTouchDevice pointer instead of merely a
device type value), and each platform or generic plug-in is now
responsible for registering one or more devices using the new API
QWindowSystemInterface::registerTouchDevice.
Change-Id: Ic1468d3e43933d8b5691d75aa67c43e1bc7ffe3e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMessageBox was being used to test nested event loops. This has been
changed to use QEventLoop directly.
Also, there was an unnecessary use of QPushButton to trigger a test
case, which has been removed.
As a result, 3 test cases can be run on VXWORKS, and one more test case
on Windows that were previously skipped.
Change-Id: Ic65ed441cd37d242f89df3ef3b8638a1458d9cf3
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
tst_QTcpSocket::disconnectWhileLookingUp required the host lookup +
connect + disconnect procedure to complete in <50ms, which is not always
true.
When disconnecting (rather than aborting with close()), wait for the
disconnection to complete with a timeout of 5 seconds.
Task-number: QTBUG-21043
Change-Id: I3b59abf9a8eb2c6d99416e1a8ec6b528885b656e
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The executable needs to be in the test directory
as it expects it sub-executables from there.
Breakage introduced by 3385fb91e1
Change-Id: Ic1f3db70851f65e2f12041c3a16cb8f0b7bdf35e
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Commit a72468e820c2922540737c053eef27d033c2e77b split the test into two
functions, but kept them combined in a single slot for QTest to invoke.
That being the case, we might as well have them as test functions of
their own right. Should work nicer with test failures, skips and such.
Change-Id: I62c1fc7777c08b3e87a5903632d73dc1e1d97e1a
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- QPixmap::to/fromWinHICON/BITMAP() became free internal
functions (see b8d330904b)
- Improve QImage check function similar to
11732d133b
Change-Id: I80ff066964ce6c339a6b9bfa5a0e10421dca162a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Use correct overload for QTranslator::translate()
- Fix LTR source text
- Use QDir::TempDir correctly (check for slash).
- Do not copy executable on Windows (which is locked), use
arbitrary data instead.
- Use Q_OS_MAC
Task-number: QTBUG-21402
Change-Id: I6ba1c7c764d4c847278eaff9a96c8cd312ac204d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In case a subprocess fails to start.
Change-Id: I1372c07de8f3580a8e7aadd6874da15bf273ac53
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Failing tests are marked with CONFIG+=insignificant_test.
tst_QTextLayout currently asserts, so it has been disabled to prevent
destabilization of the CI system.
Change-Id: I7bd836ee14085689c8a0f0ce8e3c80d81a55eb94
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
setSocketDescriptor fails because socket is in the wrong state.
This is timing dependent, if qt-test-server is still in the DNS cache
then the test failed.
- clear the DNS cache to avoid the host lookup state being skipped.
Change-Id: If159d514b1aa9b62a4834f6352d5e7b0a00a5724
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Target names with spaces must be quoted.
Change-Id: I913ef386353fc75991c8db4e3205ab511fc1f1a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
