This test may not be possible on Android, since the file system
can be mounted with noatime or relatime which means read access
will not be registered.
Change-Id: I40f587e1a1f131ee06f0e3700e908ccaa19c83ce
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Since there's no way to deploy files directly to the file file
system on Android, we put them in a qrc file and extract them
on startup.
Change-Id: I6a42aa5e0372bfd9fb2f7ccfea964c9c3c2e45d8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires that the resources are also available
in the file system. Since it's not possible to deploy directly
to the file system using Android, we extract the files on
startup instead.
Change-Id: I1d1fe7d62c4c618a89713e3a7d1903e42bfb10b8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
There's no way to install files automatically into the file
system on Android, so to test QDir on the file system, we have
to bundle the files in qrc and then copy them into the file system
on startup. This adds some complexity, but at least it will detect
regressions.
We also need to make sure the current directory is the same as
the data path, since the test assumes this, and /usr/ does not
exist on Android, so we have to use a different path to find the
root path.
Change-Id: I18d79b5ed99a0afff573beb30c61745c403f8991
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This will arbitrarily fail at certain points. Adjusting the
timeouts helps, but it's very unpredictable, so it's better
to do what we do on Windows and just expect-fail the results
that we get.
Change-Id: Ie6033c73539c2dd69115b06096919e173f097367
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Add test data to resources.
Change-Id: Ib8a5688e7caab8434b8f0676f53a2a79ec94b264
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Added the function pointer to addTransition to take
advantage of the new connect syntax.
[ChangeLog][QtCore][State Machine] Added an addTransition() overload that
takes a pointer-to-member for the signal triggering the transition.
Change-Id: Ic97f7983839217ca0c8484b269d38221cbe804e3
Task-number: QTBUG-40293
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QStandardPaths::writableLocation() is documented to return the
empty string if no matching writable location can be determined.
This is the case for e.g. FontsLocation and ApplicationsLocation on
Android. We need to still accept this as a valid response.
Change-Id: I2824e9dcfd41b1c24dbf3896b7ae9b5260e9accd
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The test expects all the files to reside in the file system,
both for loading the runtime resources and for comparisons.
Since we can't deploy directly to the file system on Android,
we go via qrc and extract the files on startup instead.
Change-Id: I17ff8985cb17dbfc45f0fb692ca46558bb5c5cdc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Since those are unpredictable, there's little we can match, besides the
"0x" for the QThread pointer. For the PID, at least we can compare it to
the value from QProcess.
Change-Id: I89420306863b95c82be761baabd733a7f17eba5e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This test fails if the environment has the variable set.
Change-Id: Ibd54ff3e6e22a885341898889088ac56e84282b1
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make sure the relational operators are in a constexpr'able form
by removing the use of the const/non-const-overloaded unicode()
function, which in the relational operators is resolved to the
non-const version, which isn't constexpr'able.
Replaced with direct member access for op== and op< (required
making them friends) and reformulating the other operators in
terms of these two.
Since I managed to introduce a bug while doing this change,
add a simple test for QChar operators, too.
Change-Id: I69f3da849e71abc2a17152f797694950914adebc
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the source model emits dataChanged, it may tell which roles
have been changed. That information was lost when using a
QSortFilterProxyModel -- the proxy simply dropped that argument
(meaning "all roles may have changed"). It's instead a good idea
to forward the roles argument, as it may minimize hits on the
proxy (on unchanged roles).
[ChangeLog][QtCore][QSortFilterProxyModel] QSortFilterProxyModel
now properly forwards the roles that have been changed when
the source model emits dataChanged().
Task-number: QTBUG-35440
Change-Id: Ifa5213866ba04dfd57d50b5fbd47638f2191eb8e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
We can not assume that the property type is always registered, because
QVariant argument may contain an instance of a different type.
Change-Id: I4fc9593b826e13c401dbdacec4d60db36edc7102
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: I91ff06644e8047c2ca483f9768b46c1372eb6171
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Previously, QVariant would try to convert one operand to the other's
type, which would produce unexpected results: the results would depend
in the order of the operands and whether there was data loss in the
conversion. In addition, ordering comparisons were only done with signed
values, yielding other unexpected results, like
QVariant(LLONG_MAX / 2) < QVariant(Q_UINT64_C(0)).
Instead, try to obey the C++ standard rules for type promotion in
expressions. Our code is a little simpler than the standard would seem
to require since we know some more details from the ABI.
[ChangeLog][Important Behavior Changes][QVariant] QVariant now obeys the
C++ type promotion rules when comparing numeric types (integrals, float
and double), including the fact that unsigned comparisons are preferred
for types of the same rank (that is, now QVariant(-1) > QVariant(0U)).
Task-number: QTBUG-42722
Change-Id: Ie7b19073dcb45485354710975e561bcdb1a753f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
The code in 4696e9dbaa was incorrect. It is perfectly valid to call
these methods with row=-1 column=1 parent=some_index, this is exactly
what happens in QListView and QTableView. Child row/column is only for
trees.
Move the coordinate mapping from QSortFilterProxyModel into a new
mapDropCoordinatesToSource internal method, used by QAbstractProxyModel.
Task-number: QTBUG-39549
Change-Id: I3312210473d84b639cbe4c01f70ea36437db3e91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Somehow, it doesn't shrink with btrfs, even if you write 1 MB of non-
null data. This does not seem to be a bug in QStorageInfo. strace
confirms that there is a second statvfs call happening.
Change-Id: I9ed99d27d25e191916278e6b8faeae132469fc63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The testcase always returns the expected result, independently of the
QEventLoop::ExcludeSocketNotifiers flag to processEvents.
In Qt4 the same test uses an intermediate QEventLoop and already runs
it before the QEventLoop::ExcludeSocketNotifiers:
QEventLoop loop;
// allow the TCP/IP stack time to loopback the data,
// so our socket is ready to read
QTimer::singleShot(200, &loop, SLOT(quit()));
loop.exec(QEventLoop::ExcludeSocketNotifiers);
This fixes and improves the test by connecting, processing and
checking the bytesWritten signal for the pending connection socket.
Change-Id: I1b1d2b7b83910c87ba3fe48e29ac9fd585ac62ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The default should be the actual time of day. Showing the process's time
is the optional case. In the future, we'll provide a way to showing the
monotonic reference time ("boot") and we should improve the detection of
actual application runtime.
Change-Id: I41936d77ab9fad2073dc0ce1c97cabe57ec39f16
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Whenever the source model of a QSortFilterProxyModel changes, and
the changes involve the sorted column, the implementation removes
the changed rows from the mapping, sorts them, and inserts them back;
in case of identical items, the rows are inserted at the end of the
block of equal rows.
The problem is that if the change doesn't actually happen on the roles
that are used for sorting, then we shuffle the rows, terribly confusing
the user. The typical case is a model with identical checkable rows:
(un)checking one row will move it at the end.
So, instead of trying to be smart with the removal/sort/insert sorted,
simply resort everything under the changed parent index. Since the
sorting used is stable, this keeps the items in the same positions.
Task-number: QTBUG-1548
Change-Id: Id0e61bd49da53b0a3e8aefa6b6893ac41179dc6f
Reviewed-by: David Faure <david.faure@kdab.com>
This would result in (a == b) != (b == a). The == operation should be
commutative as much as possible.
Now, there's still an asymmetry in that b is forced to a type and the
conversion may fail. QVariant should have an idea of what conversions
are "promotion" and which ones are "demotion" (subject to loss of data
and/or can fail), so it can do the promotion first
Task-number: QTBUG-42254
Change-Id: I9fa4496bbbf0f8719ff8456cc24247290beac608
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This now guarantees that doing a round-trip from an FP number to string
and back to number results in the same number. This change is required
because DBL_DIG and FLT_DIG don't have the meaning that we were
expecting them to, here: they mean the minimum number of digits of
precision in decimal (i.e., changing the last decimal will always cause
the FP number to change). We need the maximum number: there is one
change in the last decimal place that causes the FP number to change.
IEEE 754 single-precision has 24 binary digits and double precision has
53 binary digits in their mantissa. To convert that to decimal, multiply
by the number of decimal digits a binary digit represents (log2(10) =
0.3), then add one for the rounding and one more digit for the actual
precision we want. That is, for floats we now ask for 9 digits and for
double, 17 decimal digits.
Task-number: QTBUG-42574
Change-Id: Ic78beb60a218f75322f832d33d63fd84e7a65b65
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Convert a Windows-specific WebDAV specification
"//host@SSL/path" into URL's with scheme set to
"webdavs" and back to local file (Windows only).
Task-number: QTBUG-42346
Change-Id: I12663243848ea7b2d3f208743e837e9de14a93eb
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is required so we can take a QVariant and detect that it contains a
Q_GADGET and then use method like QMetaType::metaObject and QMetaProperty::write
with the QVariant::data
Change-Id: I3603692e4e84426e10bf59949e3def3ea4947bec
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
We're not ready.
[ChangeLog][EDITORIAL] Remove all mentions of QVersionNumber.
Change-Id: I03ad95992982eb3177f982c1eeddb6a6bc29336c
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
gcc 4.9 has the __has_include feature which enables the
TEST_FORWARD_LIST and includes the forward_list header. This in turn
checks that the c++11 flags are enabled, or throws an error.
Change-Id: I44aa58e47c2f9ba6f14cb5a68d24da4a76698e5f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Fix warning:
QEventLoop: Cannot be used without QApplication
and occasional crashes on Windows.
Task-number: QTBUG-26406
Change-Id: Ia8b2a4e3d375d1e43f0e66fe64a39af5f9cf4d60
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
This is present in QList already and its lack is a nuisance when
switching from QList based code to QVector (which makes sense e.g.
if the item size exceeds sizeof(void*))
Also, albeit operator+=() and operator<<() exist, some people
simply prefer functions with real function names.
[ChangeLog][QtCore][QVector] Added QVector::append(const QVector &) overload
Change-Id: I9aae8223b086765625f2f3071fab5da0780f8a43
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Of the const overloads that return a QString or a QByteArray, this is
one that gains the most benefit. It happens often in constructs like:
QByteArray s = x.readLine().trimmed();
After this change, 41 out of 103 calls to trimmed become rvalue in Qt
and 272 out of 441 in Qt Creator. For simplified, the numbers are 27 out
of 69 in Qt and 10 out of 19 in Qt Creator.
Other candidates are left, right, and mid, but there are exactly zero
uses of left, right and mid on an xvalue QString or QByteArray in Qt.
I'm being lazy and using qstring_compat.cpp to store the QByteArray
compat methods.
Change-Id: I4e410fc1adc4c761bb07cc3d43b348a65befa9f6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMetaType::type(const char *) requires that the string argument is
0-terminated. This new overload makes it possible to query the type
of a string with an explicit length.
In particular, QByteArrays constructed by QByteArray::fromRawData(),
for example from a substring of a normalized method signature (the
"int" part of "mySlot(int"), can now be queried without making a copy
of the string.
Also, Qt5 meta-objects represent type names as QByteArray literals,
which can be fed directly to this new QMetaType::type() overload (no
need to call strlen).
Change-Id: I60d35aa6bdc0f77e0997f98b0e30e12fd3d5e100
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Methods can be invoked with QMetaMethod::invokeOnGadget
Change-Id: Id734868bb530b02587daf0f62bce01798ade2ac2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Adds automatic conversion from QVariants with a QVariantHash to
QJsonValue and explicit methods for conversion between QVariantHash
and QJsonObject.
[ChangeLog][QtCore][QJsonObject] Added conversion to and from QVariantHash
Change-Id: I140ef881463acabaab2648e28209487d8ad18e0d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If we detect a utf8 BOM mark at the beginning of the .ini
file, skip the marker and set the iniCodec to utf8.
Task-number: QTBUG-23381
Change-Id: I1b37fc4f1638a48e4f3ee71ab165e2989bc592f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
ICU would return a utf-16 (endian dependent) codec for unicode
which is very rarely what people want. In most cases, unicode is
encoded in utf8 these days, so return a utf8 codec for it.
Task-number: QTBUG-41998
Change-Id: I51ee758d520702b263a8b2011787eb1f3455ed96
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Do not automatically add a \n to all messages formatted by
qFormatLogMessage. Some backends require a final newline,
some don't, so it's best to only append it where it's actually needed.
The returned string will be null if the pattern is empty. This allows
to differentiate between the case that the pattern just didn't apply
(empty line is printed), and the case that qSetMessagePattern(QString())
have been called (nothing is printed).
Change-Id: I17fde997a4074f58f82de6dea129948155c322d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Replace "Apple Roman" by "Macintosh" which is registered by IANA:
http://tools.ietf.org/html/rfc1345.
Replace unsupported "GB18030-0" by "GB18030".
Remove "JIS X 0201" and "JIS X 0208" as they are supported as parts of
other Japanese encodings but not directly.
Add "HP-ROMAN8" which is supported by both Qt and ICU.
Also clean the codecs test.
Change-Id: Iaf8e8ff1900d3f92ea0e0df75c60fe1534de23ac
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Substitute this encoding by "macintosh" when Qt is built with ICU.
It is for compatibility with Qt 4.x.
Change-Id: I70c51cba7d473ac81e25862736cb71a2f6894055
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
At 4GiB the CI test system still spends a considerable
amount of time testing this. Tune the size down to
16 MiB.
Change-Id: I417aa6829fcc734e5de4d7d34e503190f6b291e5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change-Id: I823566ba72668c611d225aa92c4d09a53cabe8fc
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Benign, but easy to avoid by using automatic storage.
Change-Id: I60a1a2e85d8c1b2d91f3f33973374afae8876340
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by allocating objects on the stack.
Change-Id: I1933d0abb2ebd53bcf0402f392e7e3c201756b9e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by using the same pattern as in clear().
Change-Id: Ie382313343385f0709519b232a7d58dd8181b8de
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by using automatic storage.
Change-Id: I4eefce9a7c902ceadebdd0aba1bbba7e5519cf24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by distinguishing between
owning and non-owning smart pointers.
Change-Id: Idcd7ae550a8e4e00dfcd5570790e2ed985e2379a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Makes the test execute faster (not that it's slow in any way)
and more importantly gets rid of the QGuiApplication-induced
3rd-party library leaks reported by asan and/or valgrind.
Change-Id: I94b505f15b4db577a2807b0b81464e19ce7e7cab
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
[ChangeLog][Important behavior changes][QSettings]
QSettings::value() now returns an invalid QVariant
when passing an empty key. The code path ran into
an assert, which was only noticeable in debug
builds.
Task-number: QTBUG-41812
Change-Id: I5cc32be3aa267a132e9d6639ecd6cb0bbafc15b0
Reviewed-by: Stéphane Fabry, Cutesoft <stephane.fabry@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The implementation was inconsistent with QString::right(),
and did not return the N rightmost characters but actually did
the same as QString::mid(N) (returning the rightmost size - N
characters.)
Since this function is fairly recent (Qt 5.2), is documented to
behave the same as QString::right(), and since these APIs are
meant to be interchangeable, this needs to be fixed, even though
it changes behavior.
[ChangeLog][Important Behavior Changes] Changed QStringRef::right()
to be consistent with QString::right(). The function now returns
the N right-most characters, like the documentation already claimed.
Change-Id: I2d1cd6d958dfa9354aa09f16bd27b1ed209c2d11
Task-number: QTBUG-41858
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Tracking the file, line, function means the information has to be stored
in the binaries, enlarging the size. It also might be a surprise to some
commercial customers that their internal file & function names are
'leaked'. Therefore we enable it for debug builds only.
[ChangeLog][QtCore][Logging] File, line, function information are not
recorded anymore for logging statements in release builds. Set
QT_MESSAGELOGCONTEXT explicitly to enable recording in all configurations.
Change-Id: I454bdb42bcf5b5a8de6507f29f2a61109dca9b91
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
IPv6 addresses can start with ":", for which QDir::isAbsolute() would
always return true (QResourceFileEngine::isRelativePath() returns
constant false) and would trip the calculation for local files.
Similarly, IPv6 addresses can start with strings that look like Windows
drives: "a:", "b:", "c:", "d:", "e:" and "f:" (though not today, as
those address blocks are unassigned). Since a valid IPv6 address will
definitely require at least one more colon and Windows file names cannot
contain ':', there's no ambiguity: a valid IPv6 address is never a valid
file on Windows.
This resolves the ambiguity in favor of IPv6 for Unix filenames (which
can contain a colon) and in case of an URL containing scheme, relative
path and no authority ("dead:beef::" for example could have been parsed
as scheme() == "dead" and path() == "beef::").
Task-number: QTBUG-41089
Change-Id: Id9119af1acf8a75a786519af3b48b4ca3dbf3719
Reviewed-by: David Faure <david.faure@kdab.com>
There were several use cases that did not work with the old
implementation and it was not really readable.
Task-number: QTBUG-3472
Task-number: QTBUG-40067
Task-number: QTBUG-23892
Change-Id: I1e038792dc54cdc6f8d9bb59d80b11dd3c56fac6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The result of qstrtoull() was unconditionally truncated to an int,
resulting in wrong values being appended to the segments vector
when the numerical segment value was above INT_MAX.
Prevent this by first checking the return value of qstrtoull
as a qulonglong for values larger than INT_MAX and stopping
processing in that case. That means that segments that
numerically overflow an int are now considered part of the
suffix.
Also added tests for the case where a segment value is larger
than ULLONG_MAX. That was already working correctly.
Change-Id: Ia4b89021dcfe6bfae27c8d89bb678ec5e0e3b847
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I think supporting them now is too complex for the Qt code. We would
probably need to rewrite the parser using a tokenizer so we can find the
right name of the function. Just skipping backwards breaks the support
for returning function pointers and PMFs.
Change-Id: I78636437ecd46d77e6b9b013b2f2668cca1b6cd6
Reviewed-by: David Faure <david.faure@kdab.com>
tst_qtjson.cpp(2711) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
tst_qtjson.cpp(2712) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
tst_qtjson.cpp(2713) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
Task-number: QTBUG-41100
Change-Id: I193dc48236bdd3857657a5684178630f0e1dab6d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This was done wrong when using the ini format.
Task-number: QTBUG-22461
Change-Id: Ib9390460bce6138659cceac7e3cd25339ba5e9bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need to have a finer grained control over the tests
we skip in our CI system. This adds a blacklisting
mechanism that allows blacklisting individual test
functions (or even test data) using a set of predefined
matching keys for the operating system and some other
relevant variables.
QTestlib will search for a file called BLACKLIST in the test
directory and parse it if found. The file contains a simple
ini style list of functions to blacklist. For details see
qtestblacklist.cpp.
Change-Id: Id3fae4b264ca99970cbf9f45bfb85fa75c1fd823
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
A lot of code in Qt uses VAR=1 for enabling or disabling some feature
or other, ignoring qEnvironmentVariableIsSet(), which was added for
that purpose. Other code actually reads numerical values from
environment variables. For both use-cases, provide a non-throwing,
non-memory-allocating way to get the numerical (int) value of an
environment variable, complementing qEnvironmentVariableIs{Set,Empty}().
[ChangeLog][QtCore] Added qEnvironmentVariableIntValue().
Change-Id: I81c85287ea10d355c1bbf8d7807ec9a0e477bce0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So far we've only tested matching against QStringRefs which were
spanning the entire underlying QString. Instead, use the offset
matching to also perform tests using "proper" substrings.
Change-Id: Ia66e23f738b52997311ed2cf869e595079984292
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the types doesn't match in QVariant::compare we do a comparison based
on QString, this may end up indicating a full match, though the we don't
match according to cmp. In this case it would be better if we preserved
the non-matching to avoid breaking ordering.
[ChangeLog][QtCore][QVariant] Fixed ordered comparison between QVariants
that do not match but produce identical toString output.
Task-number: QTBUG-40363
Change-Id: I84a8eca11e8875dba9948bde2906ae7c5aa35704
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This reverts commit 20cf632ad5. The commit
produced to many problems during statics destruction. For example
causing QtCreator crash (QTBUG-40987).
Change-Id: Ib52f6a449c2d84deab2de792559a6a065ca45e8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
A "sharing violation" happens when trying to delete the lock file and another
thread/process is reading it at that very moment. Detect the error and try again,
up to 10000 times - to avoid an infinite loop if QFile::remove fails for another
reason such as a sudden change of permissions preventing us from deleting our
own lock file.
On Unix the deletion can't fail because of readers, but it doesn't hurt
to check the return value there too, to catch other reasons for failures
such as a sudden permission change.
Task-number: QTBUG-38853
Change-Id: Icf12a74faed4a4916e3427abc09d9c33aa141476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor the code and move more things into the cross platform
code path.
Make sure the flags survive changing the locale of QCollator.
Use the correct locale on Windows, WinRT and OS X. We now
pass all QCollator autotests on these platforms.
Task-number: QTBUG-40778
Change-Id: Ic2d3334b5018c323a35a3ea8fc1d7ab5f99b4e62
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code was completely broken. It did dereference
val for user types, but val does in this case only contain
garbage. Instead use the pointer to the correct data.
Change-Id: I20ccf0bfa3dd3774c787d08c51cc8dd7b1ec9a1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
A well formed JSON document is not allowed to contain
trailing garbage at the end. Don't accept this in the
parser.
Task-number: QTBUG-40062
Change-Id: I0a09dbd099a8c643f58023342546c4e67d026fec
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The comparison operators between QJsonPrivate::String
and QJsonPrivate::Latin1String weren't all correct, leading
to wrong sorting of keys in QJsonObjects when the keys were
outside of the latin1 range and resulting lookup errors.
Task-number: QTBUG-41100
Change-Id: Idceff615f85d7ab874ad2a8e4a6c1ce8c2aa0f65
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Both Q_LITTLE_ENDIAN and Q_BIG_ENDIAN macros are always defined
on all architectures. So, byte order detection results in
"little_endian" value for big endian systems. Test the system
endianness in a right way, according to Q_BYTE_ORDER macro
documentation.
Change-Id: I5523f90567e78d679a3ff2902a8f5377ed39ceb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The practical uses of a POD QElapsedTimer are not really that clear, and the
number of misuses of this API are quite high. Default the state to invalid to
prevent against mistakes.
[ChangeLog][QtCore][QElapsedTimer] Is no longer a POD.
Change-Id: I267292acf2bfca7404e3e449dd04410441d7ce26
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Previously, this failed because QEasingCurveFunction only had a linear
behavior.
The fix is to change that and let QEasingCurveFunction handle
any of the simple "non-parametric easing" functions.
Task-number: QTBUG-38686
Change-Id: I666d59e10ceb589dcc52956b16a6f0c259aebdad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of simply doing a match against a string S at offset O > 0
(and checking the result), test that the results never change when matching
against the substring starting at (O - i) at offset i, 0 <= i <= O.
Change-Id: Ib7fd648ca0a36b93d145267ebfb792c46ca4e4f5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtCore][QRegularExpression] Support for matching
using QStringRef as the subject's string type has been added.
Change-Id: Idb956bbbdf4213f9ebe035db32cd37cf3370c6bc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Unify the code paths which test the normal match, the partial
match and the global matches. Not only does this remove the duplication,
but it will also enable the corresponding tests to be run over QStringRefs.
Change-Id: Ia2cbe7a540bbe864b0975c9353697bc06c99c397
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As a side effects it also adds core templates types to the tests
Change-Id: I0e3338e0bffdf21982aa83d404c83288e54411f4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch adds indexOf and lastIndexOf with QRegularExpressionMatch
output overloads to QString. This allows to get the match corresponding
to the index returned.
[ChangeLog][QtCore][QString] Added support for retrieving the
QRegularExpressionMatch to indexOf and lastIndexOf.
Change-Id: Ia0ae2d3ff78864c7053ffa397874aca1d2b1c35c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Testing using an empty string doesn't ensure that the regexp
gets validated. The function may return earlier thus making
the test useless. This patch adds a text to search in so that
no early optimization avoids the regexp validation part
Change-Id: If24b77385dde44a922d43e5ae1d7a5393d24f640
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The iterators for QJsonArray and QJsonObject are currently lacking an
operator-> definition. Unfortunately it is not possible to do in clean
way without redefining either the iterators or QJsonValueRef class.
This patch instead adds two fake pointer classes that are only used
to handle the operator-> return value.
Task-number: QTBUG-29573
Change-Id: Ief785a6afbbedc9e89cf3b6f3958c2c755997a66
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
kUCCollateDigitsAsNumberMask works only if kUCCollateDigitsOverrideMask
is also set.
Update 0: - test added.
Task-number: QTBUG-40777
Change-Id: I48bfec78f5f8439a51f8d749f0fc4397a72b29f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
WinRT is a sanboxed environment, hence files can only be created in
some writable location.
For some tests we reset the current directory to minimize the required
changes. We cannot do this for the application lifetime as the test
also has cases where it reads files relative to the executable inside
the sandbox.
Change-Id: Ib9d37c8cffd191f0d1055f835c11d10887923378
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
As a side effect, QString::simplified() will always return a detached
copy, even if it's the same contents.
QStringRef::trimmed() can use the same calculation algorithm but can't
use the trimmed_helper() template function due to its lack of a
constructor taking begin pointer and size (std::string_view could do
it). That constructor can't be added because QStringRef always refers to
an existing QString, not to data in memory.
Change-Id: Ib966c1741819c68c6bac5fcbb00f8ac818b3ccab
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is even more common than the QByteArray equivalents.
Qt Qt Creator
const & && const & &&
toLower 71 50 45 26
toUpper 35 8 46 35
Change-Id: I8b797d2321b22ce414c23656c5f1709ac649c423
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Those operations aren't very common with QByteArray but this is easy to
optimize.
Qt Qt Creator
const & && const & &&
toLower 34 10 0 1
toUpper 3 1 0 0
Change-Id: I2097955f4c889ea5a21903c35ddbc0ff27bf62c5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Do a check first if we need to transform before doing the transform.
This means we won't detach when transforming data that is already
correct.
And instead of using QChar, use our own hand-rolled table. In a proper
LTO build, the QChar calls would be resolved to a lookup of the Unicode
data, but not many people do LTO builds, Therefore, this means a great
speed-up is achieved by simply avoiding the function call. The extra
gain in performance comes from the simpler translation table instead of
the more complex full-Unicode data.
Also as a consequence, this changes the handling of two characters in
Latin 1: 'ß' should be uppercased to "SS" but we won't do it, and 'ÿ'
can't be uppercased in Latin 1 ('Ÿ' is outside the range).
Benchmarking is included. Comparing the Qt 5.4 algorithm to the new code
is almost 20x faster. Other alternatives are included in the benchmark
and are all faster than the current code, though slower than the new
one. While all of them could compress the tables to be smaller or shared
between uppercasing and lowercasing, they would also expand to more code
(though probably less than the extra bytes required in the full
translation table). In the trade-off, I decided to go with simplicity
and most efficient code.
Change-Id: I002d98318d236de0d27ffbea39d662cbed359985
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If we write to a file, its size changes. We should drop previous size
caches.
Change-Id: Ib687c91e5fc88cab588c89023f23da9622160da9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Allows to retrieve information about mounted volumes such as label,
total/available size, filesystem type and so on.
Possible use cases are:
- allows to do checks about filesystem before performing actual
operation (such as available/maximum volume size)
- allows to retrive information about volume that can be shown in file
dialogs
- allows to retrieve volume for specific path and check if two or more
paths belong to the same volume or not
[ChangeLog][QtCore] Added QStorageInfo class to retrive information
about mounted volumes and drives
Change-Id: Ibf9c2e6b53ef39c5605894a4422acdbbca4030c4
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
WinRT stores settings inside the app bundle, not in the registry.
Some tests are not fully functional due to errors in the file
implementation (See QTBUG-40588).
QSettings::SystemScope translates to a roaming container on WinRT,
meaning that settings stored inside there should be uploaded and
shared among devices. However, this is untested so far.
The tests have been updated for those platforms which do not store
the order of keys. This has been done on some locations only so
far, but needed to be done on more places for WinRT.
Task-number: QTBUG-33498
Change-Id: Ifd0194387b09c220d31812b4b6fd0ce9a7d84d24
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
Fix disconnection from pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
Commit 9cc106d9d7 fixed connect, so apply
the same fix in disconnect
[ChangeLog][QtCore][QObject] Fixed disconnecting from pointer to member
signal that belongs in the base class but whose type is explicitly given
as a pointer to a member in the derived class
Task-number: QTBUG-40638
Change-Id: Ia546fc8f36e1ea0dd0645bdd820aea47f43677ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit adds tests for ref-qualified member functions, the new
syntax for functions and decltype.
__PRETTY_FUNCTION__ for lambdas varies wildly between compilers and will
produce really bizarre results after cleanup. It's not tested and is
known to be broken.
Change-Id: I70c8dbcba54790357cecba35aa45c5cc672f29d1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On templates, adding constexpr makes a given instantiation constexpr
if it can be.
This turns qMakePair(0,0), say, into a compile-time constant.
The effects on existing code are small, but exist:
$ size lib/*{-baseline,-paircexp} | sort -nr
6516727 211192 2608 6730527 66b31f lib/libQt5Widgets.so.5.4.0-baseline
6516711 211192 2608 6730511 66b30f lib/libQt5Widgets.so.5.4.0-paircexp
5373720 44492 15976 5434188 52eb4c lib/libQt5Core.so.5.4.0-baseline
5373504 44492 15976 5433972 52ea74 lib/libQt5Core.so.5.4.0-paircexp
5107206 125072 6080 5238358 4fee56 lib/libQt5Gui.so.5.4.0-baseline
5107030 125072 6080 5238182 4feda6 lib/libQt5Gui.so.5.4.0-paircexp
1341290 30180 2600 1374070 14f776 lib/libQt5Network.so.5.4.0-baseline
1341210 30180 2600 1373990 14f726 lib/libQt5Network.so.5.4.0-paircexp
# no other libraries benefit
[ChangeLog][QtCore][QPair] Can now be used in C++11 constexpr contexts.
Change-Id: I3872e6aa33a7d02a168516f4dfa7119efcac8c40
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
and make QByteArrayList be a simple typedef.
As a side-effect, the constructor taking a QByteArray is no longer
available since I couldn't find a way to add it to QList<T> when T is
QByteArray. My template-foo failed me. I tried:
- QEnableIf<is_same<T, QByteArray>::value, QByteArray>::type
=> makes QList fail to compile for any T that isn't QByteArray
- make the constructor a template member
=> it compiles if the parameter is a QByteArray, but not a const
char[4] like the test was
- inheriting constructors
=> runs into ICC and Clang bugs that I could not work around
Besides, the constructor with std::initializer_list is a superior
solution anyway.
Change-Id: Ic86fbadc1104142bfd907a5c4147199bf839fb89
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Initial submission of a new class QByteArrayList with the
purpose of aggregating and then joining QByteArray instances.
[ChangeLog][QtCore] Added new QByteArrayList class.
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I503af58f125d7f44fef10360177490c933e5840f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class provides compare operators, stream operators, and hashing
functions. This class aims to be compatible with (but not restricted to)
the Semantic Versioning 2.0 standard (semver.org).
[ChangeLog][QtCore] Added QVersionNumber class
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I244c8ccc002909af03987a2df052734d1a8621a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The goal of this commit to make the code in the test work:
QCommandLineParser parser;
parser.addOptions({
{ "a", "The A option." },
{ { "v", "verbose" }, "The verbose option." },
{ { "i", "infile" }, "The input file.", "value" },
});
For this, QCommandLineParser needs a version of addOption that can
take a list of options. That's what addOptions() is for.
More importantly, the QCommandLineOption ctors mustn't be explicit.
OTOH, any implicit conversion from QString or QStringList to
QCommandLineOption is also undesirable.
To solve this dilemma, add new QCommandLineOption ctors that just
take one argument and are explicit, and make the existing ctors
implicit. In order to avoid ambiguities, remove the default values
of their resp. 2nd arguments. The new ctors are by intention not
\since 5.4, as they are completely transparent to the user.
Et voila, even better than getopt_long(3).
[ChangeLog][QtCore][QCommandLineParser] Added addOptions() method.
Change-Id: I5e779f3406cd0f6c8ec6ecbf6c8074af226de300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit reverts c4cef6fae9.
The above fix for QTBUG-25958 (cloned in QTBUG-40219) is not
complete and introduces the regression QTBUG-30049.
Task-number: QTBUG-30049, QTBUG-25958, QTBUG-40219
Change-Id: I3c4b774dce06c13cb4e089f8413a7747cedfd212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Background:
It is often necessary/advisable to schedule tasks on thread pools !=
globalInstance(). As Herb Sutter writes in
http://www.drdobbs.com/parallel/use-thread-pools-correctly-keep-tasks-sh/216500409
and the Qt Training Material stresses, tasks you schedule on a (global)
thread pool should be non-blocking, which currently rules out using any of
the QtConcurrent functions for, say, file I/O.
Nonetheless it's often convenient to have thread pools also for file I/O, as
the thumbnail viewer exercise in the Qt Training Material shows. In this
case, you'd use a dedicated thead pool, leaving the global thread pool for
CPU-bound tasks.
Yet, none of the QtConcurrent functions allow to pick the QThreadPool
instance on which to schedule the work created with them.
This patch prepares for them to do so.
This is the first part of the forward-port of
https://qt.gitorious.org/qt/qt/merge_requests/1281.
Implement by using a new QThreadPool* member that defaults to nullptr,
and adding setThreadPool to set this member, then using it in lieu of
QThreadPool::globalInstance() everywhere.
I chose to leave m_pool == nullptr to mean globalInstance() to avoid
creating the global instance whenever a QFuture is created, even if the
future represents the result of a calculation not run on the global thread
pool.
[ChangeLog][QtCore][QFuture] Can now be used with any QThreadPool, not
just globalInstance().
Task-number: QTBUG-17220
Change-Id: I4e1dc18d55cf60141b2fa3d14e2d44a3e9e74858
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add a test that checks that QHash keeps the first of the keys
that compare equal. This may or may not be documented, but is
inconsistent with the values in a QHash, where the last element
with equal key is kept.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_map).
Do the equivalent checks in tst_QMap, too. There, of course,
instead of equal keys, check equivalent ones.
Change-Id: I2c5f04f8e8a6bbc7dbaadadd878a4c876e4df042
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add a test that checks that QSet keeps the first of the elements
that have equal value. This is documented, but inconsistent with
values in a QHash, which keeps the last element with equal key.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_set).
Change-Id: I4ca1718bb86599b925b3ccd13b0856917cd4ce67
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is in preparation of rewriting the function for efficiency.
Change-Id: Id5c16b984b95d76e1f26d862e3813f75980f44fb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The functions can be used to optimize code that do not need to use
the split results as QString directly.
[ChangeLog][QtCore] QString can now split a string to a list of
QStringRef.
Change-Id: Ic2dc929e1fba82f9a060e37c51068a301cb5b866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
[ChangeLog][QtCore][QByteArray] Fixed a bug that would cause QByteArray
to stop converting toUpper or toLower at the first embedded null
character.
Change-Id: Ia369037206617813d86a8f1489589243c82aa51b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use the built-in hex, showbase manipulator to format the number in
hex. Also, apply nospace() only once.
Change-Id: Id4b3d5f082ad13f52c8711408d7ec609bec3a621
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Export the former qMessageFormatString() as qFormatLogMessage(). This
allows custom message handlers to format their messages just like the
default message handler, taking qSetMessagePattern() /
QT_MESSAGE_PATTERN into account.
The method should arguably not add the '\n' at the end, which a follow
up commit will fix.
Change-Id: Ib2a9cfda91473df079daf03bf3197e6ac63e013e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
It allows to create a QJsonObject instance in C++ by using
initializer list of pairs QString QJsonValue, for example:
QJsonObject o = {{"property1", 1}, {"property2", 2}};
[ChangeLog][QtCore][QtJson] QJsonObject now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: I67af881e175f427e563e685336c48a5f8466b476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On supported platform, allow to show a backtrace by using
%{backtrace} or %{backtrace depth=N separator="|"}
[ChangeLog][QtCore][Logging] QT_MESSAGE_PATTERN can include a
backtrace using %{backtrace}
Change-Id: Ib00418c070d3bd6fe846dc04bf69fa91ba64f9cd
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
If the test fails here, output the values actually used in comparison.
Change-Id: Ie4ed5ebdf1951c02b89a9648aee50a99d0bb0628
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is much more useful than the URL "file:", it allows to use
"empty path" and "empty URL" for the same meaning (e.g. not set).
QFileDialog actually uses "file:" though, as the URL for the
"My Computer" item in the sidebar. This patch preserves that.
[ChangeLog][QtCore][QUrl] QUrl::fromLocalFile now returns an empty URL
if the input string is empty.
Change-Id: Ib5ce1a3cdf5f229368e5bcd83c62c1d1ac9f8a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QJsonValue, while comparing two QJsonArrays, should consult also length
of the arrays, because a different than null base pointer doesn't mean
that an array is not empty.
Change-Id: If76739355a4e74b842e836289565f98d95c006d5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QJsonValue, while comparing two QJsonObjects, should consult also length
of the objects, because a different than null base pointer doesn't mean
that an object is not empty.
Change-Id: Ibee1849ef9fed15d32f2c8f2aad9b053846e46b7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before this change such code:
QJsonObject o;
o["blah"];
would create property "blah" and assign null value to it, while
this code:
const QJsonObject o;
o["blah"];
would not. The change unifies the confusing behavior. Now reading
a non-existing property, is not causing a property to be added
in any visible way.
Internally QJsonObject stores a special hash of undefined, but
referenced values. Such reference is supposed to not live long,
only to the first compacting or assignment.
Change-Id: Ib022acf74ff49bad88d45d65d7093c4281d468f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The operator should always return an undefined values for an empty
object
Change-Id: Ic38f7660d77c64b2d001967bc5109df4185db74a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Change-Id: I815fce7e4dbe76e21cac29beb1dbfc1083191d24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: I4f7d1228f2b90a904b6c3f99e54afcd9970b723e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: Ia284d093cd0029432372630e81657fb687b9516f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.
As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.
[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.
[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings
Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRingBuffer is a fully inlined class used in many I/O classes.
So, it must be as fast and small as possible. To this end, a lot of
unnecessary special cases were replaced by generic structures.
Change-Id: Ic189ced3b200924da158ce511d69d324337d01b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They shouldn't exist in the first place. They exist in two cases only:
1) mistake by the user in the QLibrary or QPluginLoader constructors or
setFileName
2) as a kludge for setLoadHints before a file name is set (we need to
store the user's requested hints somewhere)
This is important for the second case, as otherwise all QLibrary and
QPluginLoader objects without a file name would share the setting.
Task-number: QTBUG-39642
Change-Id: Iebff0252fd4d95a1d54caf338d4e2fff4de3b189
Reviewed-by: David Faure <david.faure@kdab.com>
