A single configuration provides qdoc and qtattributionsscanner via
provisioning. The environment variables instruct QDoc to run in
testing mode; it ignores linking warnings (since we don't have .index
files for external documentation modules) and terminates with non-zero
exit code if documentation warnings exceed the limit set in the
documentation config.
The provisioned binaries are portable, packaged together with their
dependencies. As they are installed under /opt, the instructions
create symlinks to the binaries in the install directory before
building the 'generate_docs' target.
Pick-to: 6.2
Task-number: QTBUG-78069
Fixes: QTBUG-95554
Change-Id: I4a4765250247e2fc6eddd153c36cf8126ddd10ae
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Any failing tests in CMake configurations will now prevent
integrations to go through in the qtbase repository.
Task-number: QTBUG-84886
Change-Id: I8c963cb2540a29a9c8702acd3d282da82fb521e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Equals_value check that if the property is same as given value.
Equals_property compares properties in this case the OS of target and host.
Change-Id: Ica42f0f99562911a97d2f6bd02bd8a6420c980ac
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There are things that could be shared around all Qt submodules. In particular
compiler specific configuration should not be repeated over and over.
The new file can be included directly from all modules that uses QtBase.
In longer term one would have a separate repository for such instructions as
most of them are not QtBase specific.
Change-Id: I0590b2a0c78b73e1b9dbb27cc1da6568cbe56563
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We do not need to print the whole cmake configuration anymore.
Change-Id: I429e06f65258d0be0cf8b7c90e81c0593718e48c
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CMake Build Bot
We should check if configureArgs has "-DBUILD_SHARED_LIBS=OFF", that means
"contains_value" not "in_values".
Change-Id: I6c0c3ac695fa439c68f3027e70adc389f6fb27c1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
MODULE_ARTIFACTS_RELATIVE_STORAGE_PATH was pointing to a build
artifact, instead of a path to a successful item.
Change-Id: I01490e63e70beae2f613cda5451a9e2ddb5451fa
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We do not run the test in such configuration. In theory the build
should success (it doesn't for now) but it creates a lot of data.
So the coverage gain vs cost ratio is not great.
This workaround aims to unblock cmake builds.
Change-Id: Icd730d88bf800ee2e7764704a92238ec147d47f9
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
We do not need or should to define these variables in the product
configuration file. It should be enough to just have the compiler
name.
Change-Id: I797958a2c35641f1b79e4e74f3feb49312f8b9c4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The resulting test artifacts are way to huge to upload.
Change-Id: I6df1f1c4bdb0fe2cfb7f7baed8999a1ee24b879e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The module yaml file provides the instruction for creating and upload
the test artifacts, it might as well provide the instruction for
downloading it. Coin sets the corresponding environment variable for the
storage path now.
Change-Id: I4aabe60e28c0c1a6d5934b3b7b797835a793a7fe
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As an initial way this allows running tests. Coin does not yet collect
the results and the logic for re-running is inside ctest.
Change-Id: Ieab619d5f8f4ebdd8cd1293489db36d0bbd7c74a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We don't need the full cmake invocation as when configuring, instead we
can use the qt-cmake wrapper script that uses the generated toolchain
file.
Change-Id: Ie0d554fbf8543d950112108d6a3f8a7c3a58a6a6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Remove dummy test instructions that don't work right now and cause
failures.
Change-Id: I30195fe605419a8eb462e8315f71718dd86df412
Reviewed-by: Liang Qi <liang.qi@qt.io>
That way we can simplify product level configuration.
Change-Id: I6825a10e4652dc7a730d23aaa7d4e7db9c079e50
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Now execute command can directly specified how the arguments should
be divided. The default option doesn't work well for CONFIGURE_ARGS,
because we want to pass it's result as a separate subprocess
arguments.
Change-Id: I6b7adb04164f5568d9ad2f45e3334d7a7a49bc79
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
By using the new environment variable for the generator selection
introduced in 3.15, we can later select the visual studio generator once
the qtbase build is fixed. This will simplify the VS selection code in
this file and allow getting rid of the ENV_PREFIX and .bat file.
Change-Id: I9f76b5714450ffa60b496aef0ce5a0c21e843bef
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This is just a small step towards the situation where we build the tests
during the module build phase and later extract and merely run them.
The general steps we need are:
* build tests separately, which includes the cmake test plan
* let coin archive the tests (build) directory
* in the test VM unpack everything
* run ctest on the test plan that was part of the tests archive
This patch implements the first two steps.
Change-Id: Ifb8321015d0d18ad20e8cf20bb8b746030202daf
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Coin implicitly was exporting some variables if ICC was used.
This patch is just a first step to enable ICC in CI. To make
it really working one would need to fix the QtBase code and
enable ICC in qt5 repository.
Change-Id: I2fca19ff10d7390fa013f511f167c0c1c2fba427
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Since 3.15, not only --build can call the low-level build tool,
--install can also be used to run the installation. There's also an
environment variable that can be used to control the backend at cmake
time, but that may only be useful later.
Change-Id: I8c1ee48f946e110af3e824cf8980bbacbb94db99
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CMake Build Bot
On Windows, we have a problem with locating MSVC. Depending on system
version it can be installed in different directories. Currently
we have a custom logic to handle it, but in theory we could just use
"ProgramFiles(x86)" to abstract it.
Change-Id: Ia94a41d9ef6229de712606f9a9d3d61a0abeb24f
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As now the configuration syntax supports enable_if, we can get rid
of double negations.
Change-Id: I5b8b695d4f7a72cd1a836b9b427096fb4e3b85a7
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The current CI magically add prefix to every executed command if
target compiler is MSVC. The prefix just calls vcvarsall.bat.
The script has to be called for every command, because of the CI
agent runs every command as a subprocess. It means that script
sourced environment is not passed to subsequent commands,
therefore all changes are lost.
The prefix, as a concept, has known performance issues (COIN-253),
so in long term it would be nice to move to another solution.
CustomModule doesn't support prefix. Therefore the proposed approach
moves the ugliness from CI code to the yaml configuration file.
It has two advantages; nothing needs to be implemented on the CI
level and hopefully someone in future will clean it up as
the problem is more visible and publicly fixable.
Change-Id: Ice3cff89e3a59b2a57e675b7892fde0d04433ba8
Reviewed-by: Liang Qi <liang.qi@qt.io>
That allows us to skip all the madness of choosing between
make/nmake/jom.
In addition it is actually faster to build with ninja, then other
tools.
Change-Id: I31049a292495800606cede6f15011d97af7c3e41
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CMake Build Bot
These arguments are specific to the build and changes to them are _not_
affecting configuration.
Change-Id: I8c46a0dbea8978f13e78c5cb8f41987f4fde09c8
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Signing package may take more then 10s while calling echo really
should take less then 60s ;-)
Change-Id: I1798981492d1467bb8b20099ea705b08ea9b0914
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The number of CPUs is set implicitly by MAKEFLAGS and NIJAFLAGS.
Change-Id: Ie9296f9a7872253c696536d7b3d6235c7881d42b
Reviewed-by: Liang Qi <liang.qi@qt.io>
That way we can update instructions without waiting for
Coin update.
The patch contains invalid test instructions, but as
cmake port is not yet able to run tests it should not
matter.
Change-Id: I86088aefec49ded60af00243b0b8c60c8f16147a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
